Used Sound Enclosure for sale (1,998)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 14 / 60 Working width (min/max) mm mm 260 (ca.) / 3200 Numerical Control /Software MAESTRO PRO EDGE Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hodpowhi Slsfx Am Tjr Hogging Units DTR (2 x Kw 8) Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) Band Pressure zone (N.C. adjustment) Edge coils support (No 2 reels) motorized Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C.) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE Milling grooving unit U (1 SX + 1 DX) 2 x Kw 5,5

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Hedpfxou Au I To Am Ter Cooling capacity: 290 kW at 7/12°C and 35°C ambient temperature Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Low-noise design thanks to optimized sound insulation Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Winter package allowing operation at ambient temperatures down to -20°C Ideally suited for industrial processes.

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Safety and sound-proof enclosures/cabins Hodjyxl Sispfx Am Tor OPTIONAL: Panels in-feed system 63.152 (mm 500 x 500) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (EVA Glue) 283.1513 Band Pressure zone + Edge coils supporting unit (No. 1+2 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-25° Multi Function Unit (Profile contour Trimming unit) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: new, Year of construction: 2024, functionality: fully functional, Kyori High Speed Press VX50-1500 with variable stroke adjustment Tonnage: 500 kN Drive design: flywheel with dynamic balancing Strip running direction: possible on both sides Main drive position: right Ram adjustment range: 55 mm Shut height standard: 300 mm Max. upper die weight: 300 kg Safety doors: front and back Work area lighting: 2 LED lights Bolster (LxW): 1500 x 600 mm Bolster thickness: 210 mm Bolster plate: T-slot pitch Bolster material: steel Press bed opening (LxW): 1200 x 160 mm Bridge in machine bed: No Ram size (LxW): 1400 x 420 mm Machining ram: 90 slot pitch Dimensions: 2311 x1835 mm Total height: 3780mm Press weight: (approx.) 14,500 kg Strip inlet height: 100 - 140 mm Strip inlet width: max. 280 mm Possible feeds: PV30-200 Cooling: water cooled, for cooling of control cabinet; AC servo main drive; as well as machine oil; connection to existing hall cooling system Press control with the following features: - 15" touch screen with stand. - User-friendly visualized menu navigation - Data import/export - Energy safe / night shutdown - Three-level energy options - User administration - Error log - High resolution coding system - Tool changeover including stored process parameters - TDC shutdown with brake angle calculation over entire speed range - Oil and air pressure display including monitoring - Integration of the press into a process chain via peripheral interfaces -Ethernet interface - USB interface - Backup function - Test stroke - Reverse run - Increased working capacity, i.e. reduction of speed to 80 strokes/min. - Quick lift including automatic approach to quick lift position and the shut height in set-up and continuous mode - Stroke change menu driven - Detection of the working stroke after stroke change with SET/ACTUAL comparison - UPS - for fail-safe operation - Absolute ram position display - Punching area protection with non-contact safety switches - Beckhoff "Twincat 3.1" control system - Beckhoff "TwinSafe" safety controller - water-cooled, for cooling the control cabinet and AC servo main drive * for stable production with fluctuating environmental influences such as heat * minimal heat dissipation inside the sound enclosure due to main drive * no suction and swirling of punching oils and particles through main drive - all electrical cables, connectors, control elements, are professionally installed Hodpfswhk Dpjx Am Tsr - Remote support Team Viewer - Internet access through integrated Ethernet interface - Interlinked EMERGENCY STOP function - Extension of the press control for further SYS products on request - Integrated service counters for programmable maintenance intervals and maintenance instructions - 8 customer-specific error messages - 2 peripheral interfaces including power supply *Harting Interface 16A *Harting Interface 32 A - SCHUKO socket outlet 230V 10A

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units 75.30 (2 x Kw 6,6) Free space Hodpfx Amounrwns Tsr EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Rough Trimming unit 08.055 (2 x Kw 1) 0°-30° Fine Trimming unit 08.055 (2 x Kw 0,66) 0°-30° Profile Scraping unit 08.515 Free space Buffing unit 08.617-2 (2 x Kw 0,18) Nr. 2 Milling grooving units RIGHT: 75.30 (2 x Kw 4,4) 90°-180°

Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Adjustable feeding speed (m/min ) high speed 10 - 60 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Hedpfx Amsifnxxj Tor Edge coils supporting unit (No. of reels) 2 Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Milling grooving unit UF11 (1 x Kw 4) 0°-90°

Year of construction: 2006, condition: good (used), RITTER brand welding fume extraction, dust extraction, and self-cleaning filter, pneumatic and vacuum-operated. Suitable for welding, grinding, sandblasting, and all types of dry dust. Filter cartridges in good condition. Hsdshyg Ivopfx Am Tor The filter is pneumatically cleaned with pulses of compressed air during operation, resulting in high device efficiency. Designed for continuous operation. Fan in a sound-absorbing enclosure, 2.2 kW. Capacity: 1200 m3/h. Filtration area: 10 m2. Additionally equipped with an automatic spark detection and extinguishing system. The spread of sparks is usually caused by the operation of production machinery or material contaminants. The result of such a situation is downtime in the production process and losses for the company, and in some cases, a serious threat to human life. Therefore, in order to eliminate similar hazards, pneumatic and mechanical conveying devices should be monitored for the presence of sparks and properly protected by using spark detection and extinguishing systems.

Condition: good (used), functionality: fully functional, Mill with extraction system, sound-attenuating enclosure Hjdpfx Asvzzx Eom Tjr Power: 4 kW All functions tested and fully operational!

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 3 h, functionality: fully functional, machine/vehicle number: PG-D 1100 X-TEA, type of cooling: water, fuel: diesel, nominal power: 8 kW (10.88 HP), Equipment: chassis, Year of manufacture: 2022 Only 3 operating hours Includes wheel set Self-collection only Continuous output (active power): 5.4 kW at 230V / 8.0 kW at 400V Socket configuration: 1 x 230 V, 16 A / 1 x 230 V, 32 A / 1 x 400 V, 16 A - Sound-insulated diesel engine (compliant with noise and emission regulations) Hodpfx Amou D Abwj Tjr - Ergonomically positioned connections at the front in a control panel with voltmeter and hour meter - Full enclosure provides spray and impact protection - Electronic voltage regulation (AVR) - Thermal-magnetic circuit breaker protects against overload and short circuit due to faulty consumers or cables - Safe personnel protection via insulation monitoring (device does not require grounding) - Low-oil shutdown - Long operating times thanks to large 24 L fuel tank - High convenience with electric start - Water-cooled engine - Quality 'Made in Europe'

Condition: new, Year of construction: 2025, functionality: fully functional, suction capacity: 1,100 m³/h, Welding Fume Extraction, Dust Extraction, Self-Cleaning, Pneumatic with Vacuum Filter. This unit is designed for the extraction and purification of dry dust generated during welding, grinding, polishing, casting, and cutting of metals and plastics. It features a three-stage filtration system with integrated primary filter element regeneration. Contaminated air passes through a metal pre-filter (spark arrestor), a main filter cartridge, and a discharge filter made from activated carbon-impregnated fleece. The regeneration of the main filter element, which utilizes compressed air to clean the filter cartridge from accumulated contaminants, is equipped with its own 10-liter compressed air tank. The unit is recommended for applications requiring continuous extraction and filtration of airborne pollutants. Extraction arms with a reach of 3 or 4 meters are recommended as accessories. The illustrated EC model is characterized by the following features: - Fan with brushless EC motor and 0.78 kW inverter, sound-insulated - Advanced next-generation EC motor design – ensures energy efficiency, precise speed control, and quiet operation - Reliable induction motor – robust and reliable solution that guarantees high performance and trouble-free operation even under demanding conditions Maximum Capacity: 1,100 m³/h Automatic filter cartridge cleaning Self-supporting extraction arm (L = 3.0 m, d = 160 mm, hood diameter 315 mm) Three filtration stages: Hjdpfx Amonabuzj Tor • Coarse pre-filter (30% metal content, G2) • Main cartridge filter with 99% separation efficiency for particles ≥ 0.5 µm • Coarse final filter (70% activated carbon, G4) PTFE membrane filter (filter class F9) Coarse dust container below pre-filter Grid and dust container below main filter Welded steel enclosure with powder coating Noise level: 64 dB(A) Various configurations available to meet customer requirements. Applications: - Welding shops - Metalworking industry - Grinding and polishing stations - Plastics processing and machining This unit is ideal for environments that require constant and effective filtration of dry dust from the air. Made in Poland. The listed price applies to the model shown. Machine warranty: 12 months

Condition: used, K+G Wetter Bowl Cutter -Type: SM 90 -Power: 33 kW -Bowl capacity: 90 L -2 bowl speeds -Power supply: 380V 50Hz -Weight: 1420 kg -Made of stainless steel Hjdpox A Tx Njfx Am Ter -Dimensions: 2000 x 1400 x 1600 mm -Sound-absorbing enclosure (Plexiglas) -Stock quantity: 1 -Condition: Used in very good condition, overhauled, ready to work

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: API629410, Technical characteristics: Core Specifications Attribute Value Motor Power: 55 kW (75 hp) Hodsyam Nqjpfx Am Ter Maximum Working Pressure: 7.5 bar Free Air Delivery (FAD): approx. 174.4 l/s (approx. 369 CFM) Cooling Type: Air-cooled Noise Level: approx. 67 dB(A) Drive Type: Gear-driven Integrated Dryer: Yes (Full Feature “FF” version) Electrical Supply: 400V / 50Hz Regulation System: Full load / no load with Elektronikon® controller Dimensions (L×W×H): approx. 1656 × 1100 × 1968 mm Weight: approx. 1100 kg Design & Features: - Sound-attenuating enclosure: Steel canopy with flame-retardant insulation for quiet operation. - Elektronikon® Controller: 3.5” color display with programmable pressure bands, remote monitoring, and auto-restart capability. - Zero-loss condensate drain: Integrated into the dryer for efficient moisture removal without wasting compressed air. - Integrated moisture separator: Labyrinth-style, built into the aftercooler for enhanced air quality. - IP55-rated motor: Dust and water-resistant, suitable for industrial environments. Reliability & Maintenance: - Synthetic oil: Rated for 8,000-hour change intervals. - Spin-on oil filter: With integrated bypass valve for easy servicing. - ASME-approved air/oil separator: For long service life and minimal oil carryover. Machine status: WORKING

Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,729 h, functionality: fully functional, travel distance X-axis: 980 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 980 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Spindle speed range: 0–18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 1,250 × 700 mm Operating hours Machine operating hours: 46,922 h Program runtime: 20,279 h Spindle operating hours: 20,746 h EQUIPMENT Fixed angular table 3D measuring probe Heidenhain Tool measurement in the working area with BLUM laser Hodpfx Aszmry Tjm Ter Vertical tool changer with 32 magazine slots Full protective enclosure with sliding doors and interior lighting Electronic handwheel Operating modes 3 and 4 Chip conveyor Coolant system 3 height-adjustable machine feet Spindle cooler Control cabinet cooler from Rittal Operating manuals

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 410, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 500 mm Travel range Z-axis: 500 mm Spindle speed range: 0–10,000 rpm Spindle speed control: stepless Tool holder: SK 40 Magazine capacity: 20 MACHINE DETAILS Control system: Heidenhain TNC 410 Clamping area: 1,000 × 500 mm Hedpfxezmryye Am Tor EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant system with enhanced pump Coolant pressure: 20 bar Chip conveyor Operating manual

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,377 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 500 mm Speed range: 0–20,000 rpm Hsdpfezmrpujx Am Tsr Speed control: stepless Magazine capacity: 30 Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 900 × 600 mm Operating hours Machine operating hours: 54,796 h Spindle operating hours: 23,462 h Program run time: 20,377 h EQUIPMENT Fixed tilting table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the working area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals

Condition: new, Year of construction: 2023, functionality: fully functional, table length: 1,500 mm, table width: 3,000 mm, workpiece height (max.): 150 mm, control type: CNC control, TECHNICAL DETAILS Workpiece thickness max.: 150 mm Plasma cutting range: 0.5 to 60 mm Recommended cutting range: 0.5 to 40 mm Maximum penetration depth: 30 mm Table width: 3,000 mm Table length: 1,500 mm Torch heads: 1 Feed rate: 20,000 mm/min Hsdpfx Ajzlg E Iem Ter Vertical adjustment: 400 mm MACHINE DETAILS Control system: CNC Filter area: 100 m² Fan capacity: 4,500 m³/h Motor power, extraction: 5.5 kW Current consumption: 11.5 A Noise level: 75 dB(A) (+ max 10 dB(A) during cleaning pulse) Intake nozzle: DN 250 mm Total power requirement: 15 kVA Connection voltage: 400V/50 Hz or 480V/60Hz Type of current: 3Ph+N+PE Space requirement: approx. 4.5 x 2.5 m Frequency converter: EATON, located on the left in the attached control cabinet Fan arrangement: on the machine, including sound-absorbing duct bend, right side EQUIPMENT Heavy-duty machine bed with precision guides Ball-bearing transverse carriage Thermal separation of drive and cutting area Automatic height detection and torch height control Torch holder with collision protection 3-sided access to the cutting area SATOTEC extraction table Kjellberg Q1500 power source Fully automatically controlled plasma gas console Q-Gas Lantek Expert Cut CAD/CAM module TEKA EcoCube extraction system Automatic filter cleaning (PLC) Compressed air connection and condensate drain Grounding bolt Cables in UL design

Year of construction: 2018, condition: like new (used), functionality: fully functional, TECHNICAL DETAILS Load cell: 2 pcs Xforce K Testing software: testControl II & testXpert III Load cell: Xforce K Measuring amplifier: DCSC module Documentation: available FURTHER TECHNICAL DETAILS - as per documentation, no guarantee Maximum test force Fmax: 50 kN Total height of the testing chamber: 1,534 mm Height of the lower testing chamber without attachments: 1,355 mm Height of the upper testing chamber without attachments: 1,369 mm An additional crossbeam is required for the upper testing chamber. Testing chamber width: 440 mm Load frame Load frame height without uprights: 1,714 mm Load frame height with uprights: 1,829–2,694 mm Load frame width without uprights: 760 mm Load frame width with uprights: 936 mm Load frame width with uprights and machine electronics: 1,124 mm Load frame depth: 140 mm Load frame depth without uprights and with drive base: 507 mm Load frame depth with uprights: 762 mm Load frame depth with uprights and machine electronics: 765 mm Weight and footprint Weight with machine electronics, uprights and typical attachments: approx. 300 kg Net footprint: 0.01 m² Load frame footprint: 0.713 m² Hedpfszpw Hdox Am Tor Average sound pressure level at maximum speed at a distance of 1 m from the front of the machine: 61 dB(A) Drive Crossbeam speed: min. 0.0005 mm/min to max. 600 mm/min Crossbeam return speed: max. 1,000 mm/min Deviation from the set drive speed: max. 0.05% of the actual value Drive path resolution: 0.317891 nm Positioning repeatability without direction reversal: ±2.0 µm Adaptive control Cycle time: 1,000 Hz Power input Power connection plug CEE 7 (Schuko) Power connection: 230 V, 1 Ph/N/PE Power consumption at full load: approx. 2.3 kVA Mains frequency: 50/60 Hz Mains-side protection of the power connection cable: 16 A Safety functions The drive is equipped with a mechanical holding brake. When switching off, when the emergency stop is activated, or in the event of a power failure, the material testing machine stops at the current position. Unintended unloading due to energy stored in the specimen is prevented.

Condition: used, Year of construction: 1991, HAMBA BK 8006-P Ultra-Clean Cup Filling and Sealing Machine The HAMBA BK 8006-P is a high-performance, fully automatic, linear multi-lane cup filling and sealing machine engineered for the precise packaging of dairy, dessert, and liquid food products. Built to rigorous German engineering standards, this system combines exceptional throughput with advanced "Ultra-Clean" hygienic technology, ensuring extended product shelf life and uncompromising safety. Key Performance Capabilities - High-Speed Output: Delivers high-volume production capacities reaching up to approximately 12,000 cups per hour (depending on container dimensions and product viscosity). - Multi-Lane Linear Efficiency: Utilizes a space-saving, index-motion linear conveyor system for continuous, stable container handling. - Precise Multi-Component Dosing: Configured to accurately portion multi-layer products, making it ideal for puddings with toppings, yogurts, and layered desserts. Advanced Hygiene & Ultra-Clean Standards - Contamination Control: Equipped with integrated sterile air and containment enclosures to safeguard open product zones. - Container Sterilization: Employs specialized sterilization modules (such as steam, UV, or chemical sanitization) to treat cups and lidding foil prior to filling. - CIP/SIP Ready: Designed for seamless integration into Clean-in-Place and Sterilize-in-Place plant loops to minimize changeover downtime. * Station 1: Cup station Station 2: For level control and for double or missing cup Station 3: H2O2 disinfection station for cups * Station 4: Filling station Station 5: Aluminum lid H2O2 disinfection station * Station 6: Thermal sealing station * Station 7: Expiration date print station Hedpfjzqtkzjx Am Tjr * Station 8: Integrated gripper

Condition: new, Automatic hopper feeder and loader 1350mm length capacity (longer on request) Adjustable feed stroke- pneumatic / mechanical - standard model Piece positioning device with double pneumatic clamps. 3KW motor with 500mm blade. 2800 rpm. Mechanical blade angling 0 degrees / + / - 60 degrees. Minimum infeed length 200mm / maximum 1350mm. Hedpfx Aen Nv Tiem Tor Minimum section 20mm wide x 10mm thick / maximum 200mm wide x 100mm thick Movement / feeding of timber adjustable 1 to 395mm PLC control Maximum production 500 - 800 pieces per hour (depending on length of cut). Pneumatic head stroke. CE safety enclosure. Overall dimensions 2450mm x 1000 x 1900mm.

Condition: used, This listing is for WR PCR Workstation The unit is in full working condition and ready for immediate use This premium biological enclosure features twin UV decontamination action to neutralize airborne and surface contaminants, ensuring an ideal workspace for sensitive DNA/RNA amplification and sample preparation workflows. Hedpfx Amozqf D He Ter Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, Year of construction: 2019, High-performance automatic transfer switch (ATS) from the ASCO 7000 Series, designed for critical power infrastructure in data centers, hospitals, industrial facilities, and backup power systems. This is a G-design unit with a solid neutral, rated up to 1200 amps, 3-phase, with Group 5 Controller and Type 1 enclosure. Technical Specifications: Series: ASCO 7000 Series ATS Design: G-design Current Rating: Up to 1200A (model shown) Voltage: 480V Poles: 3 (Three-phase) Neutral: Solid (A) Control Module: Group 5 Controller Enclosure Type: Type 1 Frequency: 50/60 Hz Transfer Type: Automatic (Open Transition standard) Certifications: UL 1008, CE, ISO 9001 Hsdpfx Amew Enquj Ter Features: Field connections via terminal block (TB) Transfer Control & Indicators on door panel Engine Start contacts, Auxiliary Circuits Alarm relays, test functions, diagnostics Fault withstand and closing ratings suitable for generator/utility configurations Compatible with bypass/isolation options (in extended models) Application Areas: Data Centers & Critical IT Healthcare & Life Safety Systems Industrial Facilities Government and Military Infrastructure Commercial Buildings with Backup Generators Condition: Used – Excellent condition, from professional environment. Units available: 8 units in stock

Condition: used, Year of construction: 2012, 2012 DATRON M8 High-Speed Machining Centre High-Speed Precision Milling for Aluminium, Plastics & Composite Materials The 2012 DATRON M8 is a purpose-built high-speed machining centre designed for manufacturers demanding exceptional surface finishes, short cycle times and outstanding accuracy. Unlike conventional VMCs, the DATRON M8 has been engineered specifically for high-speed machining of aluminium, plastics, composites and other non-ferrous materials, making it an excellent choice for precision engineering, aerospace, medical, electronics and motorsport applications. With its rigid gantry construction, high-speed spindle and integrated minimum quantity lubrication (MQL) system, the M8 delivers significantly faster machining while reducing coolant consumption and overall operating costs. The large working envelope also allows manufacturers to machine oversized components or nest multiple smaller parts in a single setup, maximising productivity and spindle utilisation. Designed for continuous production environments, the DATRON M8 combines rapid traverse rates, excellent dynamic performance and micron-level accuracy to produce complex components with superb edge quality and surface finish. The machine excels in applications such as: * Aluminium components * Front panels & enclosures * Precision engineering parts * Medical devices * Aerospace components * Composite materials * Plastics & engineering polymers * Signage & engraving * Prototype and low-volume production Key Benefits ✔ High-speed machining technology for reduced cycle times ✔ Exceptional surface finishes with minimal secondary operations ✔ Large machining area for oversized parts or nested production ✔ Low operating costs through efficient MQL lubrication ✔ Outstanding accuracy and repeatability ✔ Ideal for aluminium and non-ferrous materials ✔ Perfect for prototype work through to full production Whether you’re expanding production capacity, replacing slower machining centres or introducing dedicated aluminium machining, the DATRON M8 represents an excellent investment. Its combination of speed, precision and low running costs has made the M8 one of the most respected high-speed machining platforms in the industry, with installations across precision engineering, aerospace, medical and electronics manufacturers worldwide. The original M8 platform established DATRON’s reputation before evolving into the later M8Cube generation, renowned for its productivity and precision. (DATRON⁠) For more information on this machine, including specifications, tooling, inspection reports and availability, contact Swiss CNC Ltd today. Hodpfx Amjzmp D Ae Tjr

Condition: used, Year of construction: 2007, Angelus 56P Can Seamer (2007) Hedpjzl Ufvjfx Am Tjr With associated conveyor and enclosure Please note the items in this lot 30466-371 are simultaneously offered in the combination lot 30466-348 as a complete line. The separate parts of the complete line 30466-348 are offered as individual lots 30466-349 to 30466-374 Bidders can bid on the complete line and/or on individual lots. Sales are conditional and subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2 working days

Year of construction: 2026, condition: new, Suitable for automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools, and optionally profile tools using the disc electroerosion process. Accessories: Total enclosure, SK 40 or 50 workpiece carrier according to preference, Cooling unit for dielectric, Automatic fire extinguishing system, Measuring probe, SK 40 or 50 measuring mandrel depending on workpiece carrier, Alphanumeric keyboard for data management, Software package for peripheral machining of end mills and jointing cutters, linear machining in all common axis directions, Software package for compact and radius machining, profile cutters in path-travel and plunge-cutting processes, Software package for profile tools, 4-path program for peripheral electrodes, Software package for circular saws for complete machining of tooth backs and flanks of all common geometries, Automatic central lubrication, 1 short dressing holder, 1 mounting flange for erosion wheel. Machine is brand new!! Originally packed and full warranty from Vollmer! Cutter outer diameter: max. 250 mm Shank tool diameter: from 10 - 100 mm Outside diameter of disc-shaped tools: 380mm cutting length: Max. 20 mm Cutting length: Max. 20 mm Tangential clearance angle: max. 6 ° Radial clearance angle: -15° to + 6° Chamfering: automatic max. 70° X axis travel: 280 mm Z-axis travel: 330 mm workpiece carrier cone: SK 50 Y axis travel: 280 mm Workpiece carrier cone: SK 50 Hodpjy T It Ejfx Am Tjr A-axis rotation range: 360° B-axis swivel range: +/- 30 ° Tool weight max: 20 kg clearance angle: 30° Dimensions L x W x H: = 1905 x 2520 x 2430 mm Connected load: 3.4 kW (400 V / 50 Hz) colour: grey RAL7045 / RAL 7047 Diameter of rotating electrode: Max. 150 mm Rotational electrode speed: 80 - 1500 rpm weight: approx. 3000 kg

Condition: used, Year of construction: 2004, Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels. Accessories: Total enclosure, Sawblade magazine with 3 saw blade stacks each with a stack height of 250 mm (for approx. 35 saw blades each) #9007511, Device for automatic chamfering of sawblades from Ø 145 mm, Automatic threading of the grinding wheel, Automatic fire extinguishing system, Automatic central lubrication, Coolant system 400 L with coolant tank with filter system, Machine lamp, Oil collecting tray, 3 sawblade mandrels (loader). Hjdpfx Aow I Sk Nem Tor Saw diameter: 40-710mm Tooth pitch: 1 - 55mm Number of teeth: 2 - 998 Saw blade thickness: max. 8 mm Grinding wheel diameter: 200x32mm Connected load: 10kW (400V / 50Hz) mass: about 3200 kg Dimensions: L x W x H = 1198 x 1750 x 2015 mm colour: blue/grey RAL 7047 / blue RAL 250-50-20.