Used Sound Enclosure for sale (1,892)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: ELB0109, cooling capacity: 720 kW (978.93 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,500 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, pressure: 15 bar, volume flow: 65 m³/h, total width: 406,000 mm, total length: 225,000 mm, total height: 247,000 mm, noise level: 72 dB, input frequency: 50 Hz, Trane Air-Cooled Chiller GVUF205 X XLN – 2018 Manufacturer: Trane (France) Model: GVAF 205 X XLN Year of Manufacture: 2018 Serial Number: ELB0109 Type of Cooling: Air-cooled (screw chiller) Cooling Capacity: ~720 kW, 620kcal/h Refrigerant: R134a (2 independent circuits – 75/70 kg, GWP 1430) Power Supply: 400 V / 50 Hz / 3-phase Maximum Current (A max): 506 A Starting Current: 596 A Short-Circuit Protection (ICC-LRA): 35 kA Design Pressure: Refrigerant circuit: LP 15 bar / HP 18.8 bar Water side: 10 bar Operating Conditions: Fedsw R Ualjpfx Ag Rjga Ambient Temperature Range: –10 °C … +46 °C (optional Low Ambient Kit: up to –25 °C) Water Flow Rate: ~65 – 108 m³/h Evaporator water content: ~120 L Dimensions & Weight: Overall Weight: 4 414 kg Dimensions (L × W × H): 4 060 × 2 250 × 2 470 mm Key Features: High-efficiency air-cooled screw chiller. Two independent refrigerant circuits ensure reliability. Uses R134a refrigerant, environmentally compliant. Extra-Low-Noise (XLN) version – optimized for reduced sound emissions. Suitable for industrial and commercial cooling applications. Condition: ✔️ Good working condition ✔️ Regularly maintained ✔️ Immediately available

Year of construction: 2015, condition: used, UniMaster STS 660-10-270 - Year of manufacture: 2015 - Including oil-water separator OWS-Öwasep 1 - Including condensate drain Ecomat 3100 Fgsdpfx Aoyzc R Usg Rea With soundproof enclosure, extremely quiet operation Equipped with refrigerated dryer and bypass line V-belt driven, two-stage, 2-cylinder piston compressor Fitted with rubber vibration isolation mounts for secure placement With intercooler and aftercooler Easily accessible condensate drain valve Additional ports with blanking plugs for easy system expansion (except for the 90 l receiver) Air outlet 3/4" Space-saving vertical design Flexible upgrade options: retrofit soundproof enclosure (for compressors with 4 kW) and/or refrigerated dryer as required Easy and cost-effective vessel inspection through handhole opening Technical Data: Max. pressure: 10 bar Intake capacity: 660 l/min Effective delivery rate: 520 l/min Drive power: 4 kW Speed: 1025 rpm Tank capacity: 270 l Weight: 170 kg Noise level: 78 dB[A] Air outlet: 3/4" internal Dimensions (W x D x H): 750 x 705 x 1800 mm Availability: short-term Location: Flörsheim

Year of construction: 2004, condition: ready for operation (used), travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 700 mm, controller manufacturer: HEIDENHAIN, controller model: 430M, total width: 5,350 mm, total height: 4,020 mm, spindle motor power: 18,500 W, product length (max.): 5,150 mm, spindle speed (max.): 6,000 rpm, tool weight: 3,500 g, number of axes: 6, This 6-axis IXION AUERBACH IA2 TLF-1200.4 drilling machine was manufactured in 2004. It features an impressive X-axis travel of 1,200 mm, Y-axis travel of 1,200 mm, and Z-axis travel of 700 mm. The machine includes a robust rotary table surface of 1,000 x 1,000 mm and a maximum workpiece weight capacity of 7,000 kg. If you are looking to get high-quality drilling capabilities, consider the IXION AUERBACH IA2 TLF-1200.4 machine we have for sale. Contact us for further details. • Axes travels: • W (deep hole drilling/milling unit, horizontal): 1,200 mm • A (swiveling deep hole drilling/milling unit): +25° / -15° • B (NC rotary table): 360° • Rotary table: 1,000 x 1,000 mm, 5 T-slots • Max. workpiece weight: 7,000 kg • Max. torque: 115 Nm • Deep drilling capacity: • Max. depth (single pass): 1,200 mm • Diameter range: 3 – 25 mm (up to 36 mm with ELB in reinforced version) • High-pressure coolant system: 100 bar at 42 l/min (upgrade option 001b to 95 l/min) Fgjdpjyzgvusfx Ag Roa • Tool changer: 24 stations • Max. tool length: 300 mm • Max. tool diameter: 90 mm (160 mm with free adjacent pockets) Additional equipment • Full enclosure with roof • Oil mist extractor • Chip conveyor • 2 traveling steady rests • Deep drilling start package: tool holders and Botek Type 110 tools for various diameters Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 6034, travel distance X-axis: 7,200 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 45 kVA, controller manufacturer: HEIDENHAIN, controller model: Bahnsteuerung iTNC 530, total height: 2,900 mm, total length: 12,500 mm, total width: 4,810 mm, overall weight: 14,000 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, operating pressure: 7 bar, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN path control iTNC 530 • 4 axes • Travel paths X / Y / Z axis: 7200 / 450 / 590 mm • Working area X / Y / Z axis: 7000 / 400 / 350 mm • Weight: 14 t Equipment: - Robust base frame in welded steel construction - Ball rail guides on all axes - Milling spindle unit: 100 - 12,000 rpm, tool mounting SK 40 Drives: - X-axis (50 m/min) via rack and pinion drive - Y/Z-axis (25 m/min) via ball screw drive - B-axis: 9000°/min - Swiveling control panel - Automatic central lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication system Fedpfx Asyzxfneg Rega Technical Data: - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse X-Y-Z: 50 – 25 – 25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc-type changer with 12 SK 40 stations - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant device: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed adjustment: 80 – 120% - Drilling capacity in St 60 / aluminum: up to 28 mm Ø - Thread cutting capacity in St 60 / aluminum: up to M24 - Measurement system: rotary encoder/linear measurement system - Positioning accuracy: 0.025 mm - Repeat accuracy: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel range X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement including safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 tons - Sound emission: average sound pressure level 79 dB (A)

Condition: good (used), Year of construction: 2018, Ref. -No.: 10643 Manufacturer: FERMAT Type: Gantry Year of construction: 2018 Type of control: CNC Control: Siemens Sinumeric Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 20000 mm Y-Travel: 7800 mm Z-Travel: 2000 mm W-Travel: 1000 mm Turning Speeds: 20000 RPM Speed work spindle: 0 - RPM Max. Torque: 3294 Nm Rapid Traverse X/Y/Z: 40000 m / min Table-Size (Lxw): 20000 x 5000 x 300 mm Power Capacity: 74 kW Headstock - (spindle diameter): 160 mm Further information: - Tool cooling - Low pressure - Tool cooling - High pressure 50 bar (6,000 liters) - Tool cooling - Oil separator Fgedjyzpxfopfx Ag Rja - Sludge pump - Machine enclosure (CE) - Electrical - Linear measurement - Electrical - Remote diagnostics - ATC/Robot Robot 140 - Chip conveyor 2 - Operator cabin / protective screen - Electrical - HH iTNC 640 control system - Electrical - Handwheel - Electrical - Air conditioning for the distributor - Head - Type 2x UHA 0.001 The machine can be viewed while powered on by prior arrangement.

Condition: used, functionality: fully functional, Equipment: air conditioning, compressor, STULZ Air Conditioner (AC) Wall Units 4.8kW Plug-and-Play High-quality pre-owned STULZ air conditioning units – All-in-one, plug-and-play climate control solution Looking for a reliable, user-friendly, and affordable cooling solution? These used STULZ CHS 500M300 Z000 units deliver industrial performance with zero hassle. Technical specifications: • Brand: STULZ • Model: CHS 500M300 Z000 • Compressor: Copeland Scroll ZR18K4E • Refrigerant: R407C • Power supply: 230V • Year of manufacture: 2005 • Design: All-in-one wall/door-mounted “cassette” – compressor, condenser, and evaporator integrated into one compact unit. • Stock: 46 units available Installation is a breeze. No complex installation, additional piping, or ductwork needed. Simply mount the unit, connect it to a power source, and you’re ready to start cooling. Every component is pre-programmed and fully integrated at the factory, making this a true plug-and-play solution. Whether you’re an experienced technician or not, you’ll have the system up and running in no time. Fedoxak Dkspfx Ag Rega Whether you need to cool a server room, keep a control cabinet at the right temperature, or need a smart solution for your climate chamber, living room, or container office—these units fit perfectly. Easy to mount to a wall or door, space-saving, and ready for immediate use. Thanks to the plug-and-play design and the included step-by-step manual, you’ll have it operating quickly—without any hassle. Compact, efficient, and easy to install—just mount, connect, and start cooling. Professionally cleaned, fully tested, and ideal for server rooms, enclosures, container offices, climate chambers, or backup setups. Top performance at a fraction of the price of new—smart, fast, and budget-friendly. Limited stock—first come, first served! Test video available Transportation can be arranged on request

Condition: excellent (used), Weiss Weiss Climate Test Chamber WKL 100/70 -70°C to +180°C, Humidity, 100 Litres Compressor has been replaced! Air-cooled For sale is a professional climate test chamber from Weiss Umwelttechnik. This equipment is ideal for material testing, climate tests, as well as temperature and humidity simulation in industrial environments, laboratories, or R&D. The test chamber provides precise test conditions for extreme temperatures and high humidity levels. Data for Temperature Testing: - Temperature range: -70 to +180°C - Temporal temperature deviation at the centre of the usable space: ± 0.3 to ± 1 K - Spatial temperature uniformity (based on setpoint, range tmin to +150°C): ± 0.5 to ± 2 K - Temperature change rate: Heating 3.5 K/min, Cooling 3.5 K/min - Heat compensation: max. 700 W Data for Climate Testing: - Humidification system: - Reservoir capacity: approx. 13 l - Water quality: demineralised - pH value: 6 – 7 - Conductivity: max. 20 μS/cm - Water consumption at constant temp. +40°C, 92% r.h.: 2 l / 24 h - Temperature range: +10 to +95°C - Humidity range: 10 to 98% r.h. - Temporal temperature deviation at the centre of the usable space: ± 0.3 to ± 0.5 K - Spatial temperature uniformity (based on setpoint): ± 0.5 to ± 1.5 K - Temporal humidity deviation at centre: = 1 to ±3% r.h. Internal dimensions: Height 400 mm, Width 470 mm, Depth 345 mm External dimensions: Height 1776 mm, Width 745 mm, Depth 980 mm Mechanical Load Data: - Maximum load of test compartment floor: 10 kg - Per shelf: 10 kg - Total rack load: 50 kg Fgsdpfx Aoyw Nnfsg Rea Operating Data: - Test compartment lighting: Halogen bulb 24V, 50W - Rated voltage: 1/N / PE AC 230V ±10% 50 Hz - Rated power: 3.5 kW - Rated current: 15.2 A - Customer-side fuse: 16A slow-blow - Protection rating: Control cabinet IP 22 and touch panel IP 54 Heat Dissipation (air-cooled chambers): - Max. heat output to environment: 2500 W Noise Level: - Sound pressure level (free-field measurement at 2 m in front, 1.0 m height): approx. 59 dB(A) Feedthrough: 50 mm ∅ Interfaces: Ethernet interface (RJ45), USB interface Refrigerants: R404A / R23 Test chamber volume: approx. 100 litres Weight: 210 kg Important Information for Buyers: For your safety, we perform the following steps before sale of our chambers: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certification 4. After successful testing, each chamber undergoes a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and information may be subject to change and error!) Feel free to contact us by phone for any further questions.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 98 h, machine/vehicle number: GS30D-29313, load capacity: 227 kg, platform length: 2,790 mm, platform width: 780 mm, overall weight: 1,279 kg, working height: 7,640 mm, TECHNICAL DETAILS Working height, indoor: max. 7.64 m Working height, outdoor: max. 6.27 m Platform height, indoor: max. 5.64 m Platform height, outdoor: max. 4.27 m Platform length, retracted: 0.89 m Platform length, outdoor: 1.88 m Platform length, outdoor, extended: 2.79 m Platform extension, length: 0.91 m Platform width, outdoor: 0.78 m Guardrail height: 1.10 m Toe board height: 15 cm Height, retracted, folding guardrail: 2.00 m Height, retracted, guardrail folded down: 1.50 m Length, retracted, with integrated or optional ladder: 1.88 m Length, retracted, with platform extension extended: 2.79 m Width: 0.81 m Wheelbase: 1.55 m Ground clearance, center, with retracted pothole protection: 10 cm Ground clearance, center, with extended pothole protection: 2 cm Maximum number of persons on platform (indoor/outdoor): 2 / 1 Load capacity: 227 kg Load capacity, with platform extension extended: 113 kg Drivable up to: max. platform height 5.64 m Travel speed, retracted: 4.0 km/h Travel speed, extended: 0.8 km/h Gradeability, retracted: 25% Turning radius, inside/outside: 0 / 1.80 m Lifting/lowering time: 33 / 30 s Tilt sensor activation (longitudinal/lateral axis): 3° / 1.5° Non-marking solid rubber tires: 31 × 11 cm MACHINE DETAILS Drive type, FLA: 24 V DC (2 × 12 V, 150 Ah) Drive type, AGM: 24 V DC (2 × 12 V, 132 Ah or 150 Ah) Drive type, lithium-ion: 24 V DC (1 × 24 V, 90 Ah or 106 Ah) Hydraulic system tank capacity: 6.1 l Own weight: 1,279 kg Maximum own weight, including all possible options: 1,397 kg Maximum tire load: 642 kg Tire contact pressure: 1,084 kPa Floor loading: 10.42 kPa Fjdpfeyzrluox Ag Rjga Noise/sound pressure level (ground): < 70 dBA Noise/sound pressure level (platform): < 70 dBA Vibration: < 2.5 m/s²

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, operating hours: 286 h, machine/vehicle number: Z4525M-10187, load capacity: 227 kg, platform length: 760 mm, platform width: 1,830 mm, overall weight: 7,400 kg, working height: 15,940 mm, TECHNICAL DETAILS Working height: 15.94 m Platform height: 13.94 m Horizontal reach: 7.65 m Up-and-over clearance: 7.24 m Platform length: 0.76 m Platform width: 1.83 m Stowed height: 2.00 m Stowed length: 6.83 m Width: 1.79 m Wheelbase: 2.03 m Ground clearance (center): 0.24 m Lift capacity: 227 kg Platform rotation: 160° Jib length: 1.52 m Jib vertical rotation: 135° Upper structure rotation: 355° Drive speed (stowed): 4.8 km/h Drive speed (raised/extended): 1.0 km/h Gradeability (stowed): 30 % Tilt sensor activation (longitudinal/lateral axis): 2.5° – 4.5° / 4.5° Turning radius (inside/outside): 1.8 m / 4.27 m Tyres: 0.23 × 0.37 m Fedpfxeyzrcte Ag Rsga MACHINE DETAILS Drive type: 48 V DC (8 × 6 V, 350 Ah or 355 Ah) Emergency controls: 24 V DC Hydraulic tank capacity: 30.3 l Operating weight: 7,400 kg Tyre contact pressure: 689 kPa Ground load (tyres): 15.08 kPa Sound pressure level (ground): < 70 dBA Sound pressure level (platform): < 70 dBA Vibration: 2.5 m/s²

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 314 h, machine/vehicle number: GS47D-9115, load capacity: 350 kg, platform length: 3,180 mm, platform width: 1,160 mm, overall weight: 3,221 kg, working height: 13,700 mm, TECHNICAL DETAILS Working height: 13.70 m Platform height: 11.70 m Guardrail height: 1.10 m Toe board height: 0.15 m Platform height, retracted: 1.43 m Platform length, outside: 2.26 m Platform length, extended: 3.18 m Platform extension: 0.91 m Platform width, outside: 1.16 m Height, retracted, foldable guardrail: 2.54 m Height, retracted, guardrail folded down: 1.95 m Length, retracted: 2.48 m Length, with platform extension deployed: 3.18 m Width: 1.19 m Wheelbase: 1.85 m Ground clearance, centre: 0.10 m Ground clearance, with pothole protection deployed: 19 mm Load capacity: 350 kg Platform extension capacity: 113 kg Drive speed, stowed: 3.2 km/h Drive speed, extended: 0.8 km/h Gradeability, stowed: 25 % Turning radius, inside: 0 m Turning radius, outside: 2.3 m Lift/lower time: 71/41 s Fjdpfx Ajyzq Rpjg Roga Drive system: Two-wheel front-wheel drive Tyre dimensions: 38 × 13 × 28 cm / 15 × 5 × 11 in Control: proportional Brakes: Two-wheel rear axle, hydraulic-dynamic braking of the front drive wheels, multi-disc brakes MACHINE DETAILS Drive type: 24 V, 300 Ah Batteries: 4 × 12 V, 150 Ah Hydraulic system tank capacity: 28.4 l Noise/sound pressure level at ground: < 70 dBA Noise/sound pressure level at platform: < 70 dBA Vibration: < 2.5 m/s² CE own weight: 3,221 kg FEATURES Foldable guardrail with platform Full guardrail swing door Smart Link™ control system Recessed rear socket for charger Platform control panel with battery charge indicator Fully integrated diagnostics system Power cable to platform Attachment points for safety harnesses Emergency lowering valve for manual platform descent Emergency stop switches at platform and ground control panels Multi-disc brakes on rear axle Hydraulic-dynamic braking on front drive wheels Manual brake release device Side swing-out battery box and hydraulic components box Pothole protection Tilt angle sensor with acoustic alarm Descent alarm Flashing warning light Electronic horn Hour meter Telematics-ready connection

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 252 h, machine/vehicle number: Z34ND-1177, load capacity: 227 kg, overall weight: 5,178 kg, pivoting range: 355 °, working height: 12,520 mm, TECHNICAL DETAILS Working height: 12.52 m Platform height: 10.52 m Horizontal outreach: 6.78 m Up-and-over height: 4.65 m Dimensions Platform length: 0.76 m Platform width: 1.42 m Stowed height: 2.00 m Stowed length: 5.72 m Transport height: 2.26 m Transport length: 4.19 m Width: 1.47 m Wheelbase: 1.88 m Ground clearance (center): 0.14 m Performance Lift capacity: 227 kg Platform rotation: 180° Jib length: 1.22 m Vertical jib rotation: 139° Turntable rotation: 355° Drive speed (stowed): 6.4 km/h Drive speed (raised, extended): 1.1 km/h Gradeability (stowed): 35% Tilt sensor activation (longitudinal/lateral): 2.5° - 4.5° / 4.5° Turning radius (inside/outside): 2.13 m / 4.08 m Fgjdpoyzq A Ejfx Ag Rja Tyres (solid, non-marking): 56 × 18 × 45 cm Drive/Power Drive type: 48 V DC (8 × 6 V 315 Ah) Emergency controls: 24 V DC Hydraulic tank capacity: 15.1 l Noise and Vibration Levels Sound pressure level (ground): < 70 dBA Sound pressure level (platform): < 70 dBA Vibration: 2.5 m/s² MACHINE DETAILS Own weight: 5,178 kg Wheel contact pressure: 710 kPa Floor loading (wheels): 14.75 kPa Drive type: 48 V DC (8 × 6 V 315 Ah) Emergency controls: 24 V DC Hydraulic tank capacity: 15.1 l

Condition: excellent (used), Year of construction: 2016, Ref: 11070 . 2016 ‘Heidelberg’ Stahl TH82/644-PFH Folding Machine High performance all buckle folding machine with auto setting (no sound hoods). Comprising: • PFH82 pallet loading pile feeder designed for medium to high run lengths with low operator strain, laser guided positioning of the stack, double wheel suction head for wide format sheets. Max. pile height 1.2 metres. • Digital microprocessor control with self-learning function for signature length & spacing with run monitoring, total and batch counter with memory. • Touchscreen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • VSA 56 vertical stacking delivery. Including compressor, tools, spares & manuals. Folding sequence: 1st buckle unit - 82cm with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - 66cm with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - 52cm with 4 plates, perforating/scoring shafts Fsdpfx Asyk H H Reg Rega Gate fold attachment Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm Fold length, Min: 6 cm Mechanical speed : 50 - 230 m/min Folding production : Max. Buckle 50,000 s.p.h.

Condition: new, Year of construction: 2026, overall weight: 3,900 kg, fuel type: diesel, tank capacity: 600 l, color: dark red, power: 2,000 kW (2,719.24 HP), output current: 360 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 200 kW (271.92 HP), nominal power (apparent): 250 kVA, continuous power: 200 kW (271.92 HP), continuous power (apparent): 250 kVA, total length: 4,000 mm, total width: 1,450 mm, total height: 2,300 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, Diesel Generator Set 250 kVA Aggregate Type: P250SSF Condition: New, 2026 Engine: Perkins 1206A-E70TAG2 Generator: Leroy Somer LSA 46.3 M7 Rated Power (Standby Power/ESP): 275 kVA/ 220 kW Rated Power (Prime/PRP): 250 kVA/ 200 kW Rated Power (Continuous/COP): 200 kVA/ 160 kW Rated Voltage: 230/400 V Rated Frequency: 50 Hz Control Voltage: 12VDC Speed Regulation: Electronic Voltage Regulation: Electronic (AVR) Fgsdpfx Agsfxldds Rsa Sound insulated, weatherproof Network System: TN-C Includes control panel Includes batteries (2 x 110Ah) Includes integrated fuel tank (600 L) Includes integrated bund for fuel and engine fluids Includes circuit breaker (ABB, 4P) Includes documentation/manual Includes wiring diagram Warranty: 12 months or 2,000 operating hours, whichever comes first. You can configure your generator individually with us and order various customization options: - Socket package 16A – 125A with residual current device (all-current sensitive) - Remote control - Insulation monitoring - Enhanced sound insulation (down to 65 dB/7 m possible) - Fully automatic standby power system with automatic mains-generator transfer available on request - Grid parallel operation with load sharing and peak load (ComAP IG 1000 controller, VDE 4510 certified) - CHP configuration - Emergency power unit version for indoor installation with air ducts, ventilation, etc. Made in Germany Nationwide delivery available at extra cost. Contact us via email or call us – we’ll be happy to advise you and provide a non-binding quote.

Year of construction: 2019, condition: used, Make: FELSS, Model: CBC, Year: 2019, Serial No.: 18-2112B, Bending capacity Ø 3.2 x 0.7 mm - 14 x 2.0 mm, max. tube length 1,200 mm, 2 bending units, PC control with touch display, operator console, double-deck feeding system, loading station, robot, make Yaskawa, type YR-MA1440/MH12-A00, robot controller, type DX200, teach-in terminal, small parts feeding system with loading bunker, vibrating feeder bowl, singling unit, removal/alignment station, box outfeed line L 7,000 mm, box size 350 x 250 x 150 mm, control cabinets, protective fence/plexiglas enclosure, component provision platforms/shelves. Fedeyx Ev Uepfx Ag Rsga

Year of construction: 2016, condition: used, Manufacturer: FELSS, Model: CBC, Year of manufacture: 2016, Serial number: 15-5164B, Bending capacity Ø 3.2 x 0.7 mm - 14 x 2.0 mm, Maximum tube length: 1,200 mm, 2 CNC bending heads, PC control with touch display, operator console, double-deck feeder system, loading station, robot manufacturer: Yaskawa, type YR-MA1440/MH12-A00, robot controller type DX200, teach-in terminal, small parts feeder with supply hopper, vibration feed bowl, singling station, unloading/alignment station, crate removal conveyor: length 7,000 mm, crate size 350 x 250 x 150 mm, switch/control cabinets, safety fence/Plexiglas enclosure, staging platforms/racks, label printer manufacturer: CAB, model eos 1, barcode scanner manufacturer: Zebra, model Omni tc15. Fgodoyx Euqspfx Ag Rsa

Condition: used, Year of construction: 2007, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories: Total enclosure, Cooling unit for dielectric, automatic fire extinguishing system, Mist extractor N181 Probe, Machine lamp, automatic central lubrication, Workpiece carrier ISO50, Measuring mandrel, Cutter outside diameter: Max. 250 mm Cutting length: max. 260 mm Shank tool diameter: 10 - 250 mm Outside diameter disc-shaped tools: Max. 250 mm Tool weight max.: 20 kg X axis travel: 275 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis mounting cone: ISWO 50 E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Fgodswtmg Djpfx Ag Rea Connected load: 4.5 kW (400 V / 50 Hz) colour: gray RAL 7045/7047

Year of construction: 2005, condition: used, CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production. Accessories: Total enclosure Software path management Software P- System for peeling cutters, Software shaft endmills (207/208) Software discoid tools face (221/222/223/224) Software profiled workpieces (233/234/239/240) Software hoggers, profiled hoggers (255/256/257/258/260/261/262/263) Software discoid tools (264/265) Software shaft and jointing cutters (267/268/277/278) Software step tools (271) Software scoring saws (299) Software saws flat tooth (301) Software saws single sided with chamfer (302/303) Software saws alternate tooth (304) Software saws triple chip (309) Software saws flat top tooth (310) Software saws flat trapezoid tooth (311) Software saws alternate tooth with chamfer (312) Software shaft and jointing cutters (7/8) Software shaft and jointing cutters profiled (33/34) Software hoggers, profiled hoggers (53/54/55/56/57/58) Software discoid tools (64/65) Software shaft and jointing cutters (67/68/77/78) Software compensation (90) Software saws flat tooth (101) Software saws single sided with chamfer (102/103) Software saws alternate tooth (104) Software saws triple chip tooth (109) Software saws flat top tooth (110) Software saws triple chip tooth (111) Software saws alternate tooth with chamfer (112) Software for polishing of profiled hoggers (757/758/760/761) Filter system with chiller for dielectric fluid Automatic fire extinguishing system DIN 14497 Standard programs for measuring, eroding etc. Program for chamfering of workpiece cutting edges, Automatic Diagnosis program for machine operational status with text output on screen Loader for workpieces, with CNC-controlled pivot for loading and unloading to a magazine, 6 sided erosion wheel changer, Workhead SK 50 with adapter to 12 HSK 63 A, Turntable workpiece magazine for 12 workpieces SK 50, Turntable workpiece magazine for 4 workpieces SK 50, 6 flush sets QXD250 CAD/CAM for external PC workstation including ARES drawing program, Industrial PC external PC workstation with desktop PC, monitor, keyboard, and mouse, 1 HSK63 F adapter for measuring the machine. X axis travel: 730 mm B axis travel: +/- 30 ° Y-axis travel: 840 mm Z axis travel: 500 mm Fedpfxow S I Dgo Ag Rega E-axis: 330° A-axis: 360° Workpiece carrier: SK50 workpiece length max.: 400 mm Workpiece diameter max.: 400 mm workpiece weight max.: 15 kg Connected load approx.: 6.7 kW (400 V / 50 Hz Dimensions W x D x H approx.: 2160 x 3435 x 2190 mm Weight approx.: 7800 kg colour: RAL 7047 Telegray 4, color RAL 7045 Telegray 1

Condition: used, Year of construction: 2002, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories: Total enclosure, Cooling unit for dielectric, automatic fire extinguishing system, Mist extractor Probe, Machine lamp, automatic central lubrication, Workpiece carrier ISO50, Measuring mandrel, Tailstock. Cutter outside diameter: Max. 250 mm Cutting length: max. 260 mm Fgsdoylby Iopfx Ag Rsa Shank tool diameter: 10 - 250 mm Outside diameter disc-shaped tools: Max. 250 mm Tool weight max.: 20 kg X axis travel: 275 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis mounting cone: ISWO 50 E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) colour: gray RAL 7045/7047

Condition: used, Year of construction: 2010, Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light Fgjdpfx Ajwp Eblog Roa saw diameter: 80-840 mm Bore diameter: from 10 mm sheet thickness: < 8 mm Tooth pitch: 6 - 120 mm Cutting length:

Year of construction: 2015, condition: used, Disc EDM machine for the complete machining of rotationally symmetrical workpieces with cutting edges made of ultra-hard cutting materials. The workpieces are mounted vertically (suspended). Accessories: Total enclosure, Software for woodworking tools Software for P-system peeling cutters Software for scoring saws/radius cutters Software for 360° path programme Fjdexy Ryropfx Ag Rsga Software for 360° peeling cutters Workpiece magazine N250 (pallet magazine for max. 28 workpieces), Disc changer for up to 6 eroding/grinding discs, Adaptation to A-axis on HSK 63- F, Coolant system with pump & cooling unit Automatic central lubrication Automatic fire extinguishing system Automatic shut-off flap Gripper fingers for workpiece automation, 4 workpiece holders for workpiece magazine, 1 exchange element with flushing kit, Mechanical mist separator N183, Test mandrel HSK63F. Maximum workpiece outer diameter.: 320 mm workpiece length: max. 250 mm Travel path X1: 520 mm Bore diameter: Max. 60 mm Travel path Y1: 970 mm Travel path Z1: 420 mm Rotation range axis E1: 210° Grinding spindle speed infinitely variable: 0 - 4500 rpm. Rotation range axis A1: 360° Rotation range axis B1: +/-20° Connected load approx.: 8.7 kVA / 6.8 kW (400 V/50 Hz) Weight approx.: 7100 kg Dimensions L x W x H: 4012 x 2889 x 2611 mm colour: RAL 7047 telegray 4 / RAL 7045 telegray 1

Condition: used, Year of construction: 2009, Suitable for automatic cutting and surface grinding of hard metal and HSS rods with high precision for standard and special solutions Accessories: Total enclosure, Fedswd Ha Sjpfx Ag Roga Automatic feed (hydro-pneumatic), Rapid traverse adjustable via touch panel Automatic fire extinguishing system Kraft & Bauer FB 703, Length positioning freely programmable, Control system Siemens Simatic HMI, Preparation for connection to central coolant system. Workpiece diameter with loading magazine: 3 - 20 mm Workpiece length without loading magazine: 3-32mm Workpiece length with loading magazine: 3-310mm Workpiece length without loading magazines: 1-450mm Spindle speed grinding spindle: 2000 rpm, mass: approx. 1,700 kg weight: approx. 1,700 kg Dimensions L x W x H: 1900 x 1200 x 2400 mm colour: Gray

Condition: used, Year of construction: 2008, Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure External PC with contour management and Exprog software Cooling unit for dielectric fluid Automatic fire extinguishing system Automatic central lubrication Extraction system, Fsdpfsxy Rx Ijx Ag Roga Measuring probe Machine lamp Workpiece carrier SK 40 Measuring mandrel SK 40 cutter outer diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outer diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm X-axis travel: 500 mm Tool weight: max. 20 kg Y axis travel: 300 mm Travel path W-axis: 200 mm Machine space requirements: 2535 x 2200 x 2280 mm A-axis rotation range: 360° E-axis swivel range: 180° Weight approx.: 4800 kg Connected load: 5,4 kW colour: grey RAL 7035/7043

Year of construction: 2010, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure, Extraction N183, Cooling and cleaning device for dielectric, Automatic fire extinguishing device, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading 1 set of gripper fingers for workpiece automation HSK 63/SK40 Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A, 1 exchange element with flange, 1 x flushing kit, Test bar X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Fjdsycckcjpfx Ag Rsga Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Condition: used, Year of construction: 2013, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process. Accessories: Total enclosure, Adaptation to A-axis on HSK63-A,E incl. test mandrel Ø 25 mm System HSK63 A,E Integrated loading system and workpiece magazine for automated processing of up to 12 workpieces. Probe, Automatic central lubrication, Coolant system for dielectric fluid, Automatic fire extinguishing system, Mist extractor, Machine lamp. Cutter outside diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outside diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm Tool weight: max. 20 kg X axis travel: 500 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis rotation range: 360 ° E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2280 mm Weight approx.: 4800 kg Connected load: 5,4 kW Fjdpoylkvljfx Ag Rsga colour: gray RAL 7035/7043

Condition: used, Year of construction: 2017, Description: Suitable for cleaning coolant and oil-based grinding mist. flow: 900 m³/h Filter levels: 2 Connection piece – diameter: 150 mm Sound pressure level: 60 dB Fedpfowifahsx Ag Rega Connected load approx.: 00 V / 50 Hz / 0.9 kW Dimensions W x D x H approx.: 1182 x 574 x 560 mm Weight approx: about 130 kg colour: Grey RAL 9002