Used Spinning Lathe for sale (6,142)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Fixed setting vice with roller quills for SUI 80 TRENCIN Capacity : Dedpfju Tvdbsx Aa Nscd 210 - 370 mm 365 - 520 mm Only available as a set

Condition: used, Year of construction: 2007, turning diameter 18 (16) mm control Siemens spindle circle diameter 180 mm bar feed max. 80 mm longitudinal slide -travel 50 (63) mm cross slide - travel 20 (32) mm Spindlespeed 800 - 8.000 min/-1 power capacity - main spindel 11 kW Torque 18 Nm Dsdpfxsvanqre Aa Nocd dimensions of the machine ca. 6,0 x 1,5 x 2,2 m weight of the machine ca. 5,5 t CNC-Bar-Automatic-Turning Machine SCHÜTTE - SG 18 - Co2 fire extinguishing system Kraft&Bauer - Ruez scraper belt conveyor - IEMCA bar feeder PRA 52 42 F - Tool package - Curve package - various clamping devices

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch Dsdpfx Aju Aftgoa Nscd >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages Dcodpovtp Edsfx Aa Ned >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> Djdpfx Aovivmyoa Nocd To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Weiler precision lathe model Condor B, lead and feed screw lathe with brand new K&C 3-axis digital readout, CE compliant! Technical data: >> Machine No. 2442, year of manufacture 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, selectable >> Length: 1.83 m, height: 1.29 m, depth: 0.88 m Equipment and features: >> New K&C 3-axis digital readout, 12-month manufacturer's warranty, supplied with operating manual Features: mm/inch switching, selectable ABS/INC coordinates, value halving function, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 x brand new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 x 200 mm 4-jaw chuck with 1 set of jaws Dodpfexcuazsx Aa Nscd >> New collet chuck system and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, changewheel box with safety interlock, spindle brake About the machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes work easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Weiler Precision Lathe Model Condor 81 Lead and Feed Spindle Lathe with 3-Axis Digital Display from K&C NEW Technical Data: >> Year of manufacture 1987 Machine No. 87 835 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev Dsdpfewrmuxjx Aa Necd >> Possible threads: Metric, Inch, Module, and Diametral-Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis digital display from K&C new, 12 months manufacturer's warranty with operating manual Functions: Switch mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming 200 pcs, taper calculation, radius/diameter, quick zeroing, reversing of count direction >> 1 piece 3-jaw chuck 160 mm NEW, 2 sets of jaws >> 1 piece 4-jaw chuck 160 mm, 1 set of jaws >> Collet equipment and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Machine feet About the Machine: A used Weiler Condor 81 in very good condition is offered. The machine is, of course, fully functional and has been completely disassembled and repainted. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine on site under power.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Center Lathe Model Condor B Guide & Feed Shaft Lathe with 3-Axis Digital Readout by K&C NEW from Training Workshop!! Technical Data: >> Machine No. 91-1814, Year of manufacture: 1991 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread leads: from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Scope of Delivery and Features: >> NEW 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating manual Functions: mm/inch switch, ABS/INC coordinate selection, display value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> 1 pc. NEW 160 mm 3-jaw chuck, 2 sets of jaws >> 1 pc. 160 mm 4-jaw chuck, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle safety guard Dodpfxsw Nw Dqs Aa Njcd >> Rear splash guard >> Fixed steady rest >> Machine feet Safety features: electronic spindle guard, 2 emergency stop switches, change gear cover with limit switch, spindle brake About the machine: We are offering a Weiler Condor in very good condition. The machine is, of course, fully operational. It is a very robust and powerful lathe. The brand new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.

Condition: used, Year of construction: 1995, Technical details: number of spindles: 6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SFH130 Yob: 1995 six-spindle automatic lathe 6 main spindles as a chucker automatic lathe control Siemens S7-200 PLC Dnt drive loading and disloading in position 6 additional cooling pump with magnetic spark plug filter Dedpfx Asw Hbz Asa Nscd Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2002, Technical details: number of spindles: 8 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Dsdswutgajpfx Aa Nocd Manufacturer: Schütte Type: AG20 Yob: 2002 eight-spindle automatic lathe 8 main spindles for bars up to D=20mm control: Siemens 840D 1x polygonal turning/thread milling device (new 2011) 1x polygonal turning/thread milling device for long turning (new 2011) 1x thread cutting/quick drilling spindle (new 2011) 1x pick-up device incl. various pick-up collets 4 cnc-cross slides Double cross slide in position 7 Loading magazine PRA 52/P type 33 (bar length 3m), year 2004 High-pressure system Knoll SF 2000/Turbo-3 up to 100 bar, year 2004 Tool monitoring Brankamp Air conditioning unit Rittal in the front switch cabinet incl. spare parts package with various collets, cams and various tool holders for longitudinal and cross slides The machine has been run with oil and has processed brass Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1999, Technical details: number of spindles: 6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SG18 Yob: 1999 six-spindle automatic lathe 6 main spindles as a chucker automatic lathe control Siemens S7-200 PLC loading and disloading in position 6 spindle brake Please, contact us for getting more information and pictures on mail(at) or Dodpfx Ajw Hb Trja Nocd *

Condition: ready for operation (used), Year of construction: 1969, Centre height: 355 mm Centre distance: 3000 mm Max. swing diameter over bed/gap/cross slide: 715/790/520 mm Dcsdpfoxpuu Eox Aa Ned Spindle bore: 86 mm Spindle mount according to DIN 55027: Size 11 Quill taper of tailstock: MK 5 21 spindle speeds: 5.6 - 560 rpm 42 feeds longitudinal/cross: 0.09 - 5.6/0.045 - 2.8 mm 22 Whitworth threads: 2 - 28 TPI 28 metric thread pitches: 1 - 14 mm 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module 32 diametral pitch threads: 8 - 112 DP Drive motor, pole-changeable: 380 V, 7/11 kW Weight approx.: 7 t Space requirement approx.: 6000 x 2300 mm

Condition: repair required (used), Year of construction: 1989, 6 spindles Thread cutting Cross drilling Thread rolling Milling attachment Dcjdpjv R Uqtefx Aa Ned Many accessories Feed motor (curves) defective! with IEMCA PRA 40/32 P bar loader

Condition: good (used), Multi-spindle lathe (6 spindles) max. bar diameter 16 mm Dcodpep Dux Tofx Aa Nod guide tubes 4,000 mm chip conveyor

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 20161259/2017, Filling system for all liquids. The system was used to fill disinfectant bottles. The system was put into operation in 2017 and is still as good as new, having only been in operation for a few hundred hours. The article produced was only sold during Corona. It is also possible to purchase the complete product. Unfortunately there are only a few photos, but we would be happy to send you a video of the system in operation. Dodevmnkrjpfx Aa Nscd

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. Dcodpfx Aaoxyvbnj Ned CE-compliant! Technical data: Year of manufacture: 2006 EMCO EMCOMAT 14 D Technical Data Working Area Travel distance in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4,000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MK 2 Quill stroke: 80 mm Dimensions (LxWxH): 1,280 x 730 x 1,480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe designed for the highest demands: with stepless speed control, constant cutting speed, and a robust 7.5 kW drive power (40% duty cycle). The compact machine with outstanding performance is ideal wherever maximum precision in limited space is required, such as optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is a lathe EMCO EMCOMAT 14 D with Emco digital readout, manufactured in 2006. This lathe is in excellent original condition. It was only used occasionally in special production. The control system is very user-friendly. The guides are regularly lubricated by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. You are welcome to inspect and test the EMCO EMCOMAT 14 D under power at our premises. You will find further lathes from renowned manufacturers on our website.

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with EMCO digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the special construction department of a renowned German mechanical engineering company. CE compliant!! Technical Data: Year of manufacture: 2006 EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: Dcjdpfx Aoxyvbbja Nod 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Inner taper: MT 2 Quill stroke: 80 mm Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the Machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe designed for the highest standards: with infinitely variable speed control, constant cutting speed, and a robust 7.5 kW drive (40% duty cycle). This compact powerhouse excels wherever maximum precision is required in limited space, such as in optical, electrical, and automotive workshops, laboratories, and even in Formula 1. For sale is an EMCO EMCOMAT 14 D lathe with EMCO digital readout, year of manufacture 2006. This lathe is in excellent original condition. It comes from a facility where it was only lightly used for special construction purposes. It features an extremely user-friendly control. The ways are regularly lubricated by the central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power on-site. You will find more lathes from well-known manufacturers on our website.

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital display, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE compliant!! Technical specifications: Year of manufacture: 2006 Model: EMCO EMCOMAT 14 D Djdsxyvaqopfx Aa Nscd Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MT 2 Quill stroke: 80 mm Dimensions Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe for the highest demands: with stepless speed control, constant cutting speed and an impressive 7.5 kW drive power (40% duty cycle). This compact machine with outstanding performance is ideal wherever maximum precision is required in limited spaces, such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is an EMCO EMCOMAT 14 D lathe with Emco digital display, year of manufacture 2006. This lathe is in excellent original condition and comes from a facility where it was only used occasionally for special applications. The control system is very user-friendly. The guideways are lubricated regularly by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power at our premises. You will find more lathes from renowned manufacturers on our website.

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live center • Coolant pump • Machine lamp Dcsdpfjwudhujx Aa Nod All information subject to change. A live demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 1102-139, turning diameter over bed slide: 930 mm, turning length: 2,000 mm, spindle speed (max.): 710 rpm, torque: 8,500 Nm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Control: conventional Working area Dcsdpfxswfhbaj Aa Njd Turning diameter over bed: 930 mm Turning diameter over support: 630 mm Turning length: 2,000 mm Center height over bed: 465 mm Spindle Spindle bore: 95 mm Speeds: 7 - 710 rpm Torque: max. 8,500 Nm Adapters and accessories Faceplate diameter: 800 mm Chuck diameter: 400 mm MACHINE DETAILS Machine weight: approx. 8,600 kg EQUIPMENT - 1 steady rest

Condition: good (used), Centre height: 195 mm Distance between centres: 1250 mm Max. swing diameter over bed/cross slide: 400/265 mm Spindle mount/bore: Camlock D1-6"/54 mm Tailstock quill taper: MT 5 Spindle speeds steplessly adjustable in 3 ranges: 0 - 2500 rpm Longitudinal feeds: 0.018 - 1.2 mm/rev Cross feeds: 1/2 of longitudinal feeds 51 metric thread pitches: 0.2 - 14 mm 56 imperial (inch) threads: 2 - 56 TPI 20 module threads: 0.2 - 3.5 module Dcodpfxjxlg Dwe Aa Ned 20 diametral pitch threads: 8 - 56 DP Electrical connection: 400 V, 7.5 kW Weight: 1500 kg Space requirement: 2500 x 1300 x 1300 mm

Condition: excellent (used), Year of construction: 1992, L & Z Lathe (used) Manufacturer: Boley Model: 6 LZ AUT Year of manufacture: 1992 Center height: 140 mm Distance between centers: 500 mm Swing over bed: 270 mm Swing over cross slide: 160 mm Djdpfow N Rp Tox Aa Nocd Spindle bore: 32 mm Speed range: 28 – 3550 rpm Tailstock taper: MK 3 Quill travel: 80 mm Main spindle motor power: 1.4 / 2.2 kW Machine weight: approx. 1,050 kg Space requirements: approx. L 1,600 mm x W 1,000 mm x H 1,450 mm Quick-change tool post system Multifix size E incl. insert Chip tray Chip guard/rear splash guard Chuck guard Machine lamp Including collets - see images 3-axis Heidenhain digital readout Coolant unit The machine is in excellent condition and ready for immediate use. Forklift available, free loading onto truck Affordable shipping possible Machine location: 59510 Lippetal

Condition: good (used), Leadscrew & feed rod lathe WEILER CONDOR - Original paint - Centre height: 165 mm - Swing over bed: 330 mm Dedpex A D Ubjfx Aa Nscd - Swing over cross slide: 170 mm - Distance between centres: 800 mm - Spindle speeds: 24 - 2800 rpm - Automatic longitudinal/cross feeds - Spindle bore: 38 mm - Tailstock MT 3 - Collet chuck system + 17x collets - Three-jaw chuck - Multifix toolpost with inserts - Electric chuck guard - Chip guard rear panel - Work lamp - Various accessories - Documentation Dimensions: LxWxH 1.8x0.9x1.6 m / Weight 800 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1306.00.05, spindle bore: 26 mm, center height: 140 mm, center width: 500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 50 rpm, GDW Lead and Feed Screw Lathe LZ280G – Used but Powerful! For sale is a robust and precise GDW LZ280G lead and feed screw lathe, ideal for workshops, training centers, or single-part production. Djdpfx Aaextbbao Nscd 🔧 Technical Data (excerpt): Model: LZ280G Manufacturer: GDW – Gustav Dermentz Machine Tools Distance between centers: 500 mm Center height: 140 mm Swing over bed: 280 mm Spindle bore: 26 mm Speed range: 50–2800 rpm Machine weight: approx. 750 kg ✅ Features & Condition: Equipped with 3-jaw chuck, live center, and change gear set Includes machine lamp and splash guard Very well maintained, regularly serviced Ready for immediate use 📍 Location: Porta Westfalica 📦 Inspection by appointment possible We are happy to answer any questions you may have.

Condition: used, Year of construction: 1971, height of centers: 265 mm center distance: 1500 mm max. circulation-Ø over bed: über Bett 540 mm spindle boring: 65 mm spindle retainer: Gr. 8 retainer taper tailstock: 5 MK spindle speed: 9 - 1800 rpm forwarding feed: längs/plan 0,063-2,24/0,032-1,12 mm/U thread pitch: 0,35 - 560 mm electrical connection: 380 V, 11 kW space needed: 4580 x 1250 x 1330 mm Djdpfx Aajurirds Nscd weight: 3200 kg