Used Spray Dryer for sale (4,024)

Condition: used, machine/vehicle number: U03 04 005/0100, In 2019, the PLC control system, the touch screen control, and the frequency converter for the gun drive were replaced. - Manufacturer: Venjakob - Type: VEN SPRAY HGS-DUO-Z - Retrofit 2026 (base machine built in 2000) - Working width: 1300 mm - Spray booth width length 2,400 mm instead of 2,166 mm - Right-hand operating side - With dust extraction at the machine inlet - Price for reconditioned machine - Current condition, in the reconditioning phase - Gun drive in duo design - Dry extraction - Exhaust air capacity 7,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed 3-10 m/min - With belt cleaning system - With paint recovery via V-belt system - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Total connection ~ 15kW - Length: 6,300mm - Width: 3,550mm - Height: 2,540mm - Volts, Hz 400 / 50 Hsdex Ihviepfx Ah Ueg - Color RAL 7035 light gray/black - Location, in stock - Voltage fluctuations max. +/- 5% The image shows only one example of a refurbished automatic sprayer. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: new, -User-friendly operating concept -Efficient design for cost-effective and safe operation -Cooling fan speed-controlled from 0-100%, thus eliminating the need for the usual pressure switch and thermostat for fan control -Fewer wearing parts while maintaining a constant pressure dew point -Control system displays five different alarm states and stores them in memory -Refrigeration compressor shuts off below 15°C ambient temperature if no compressed air is flowing through -Clear layout and easy accessibility of all maintenance components -With built-in automatic condensate drain The advantages at a glance Hedpfxeu T Hrve Ah Uog -High cost-effectiveness -Excellent price-performance ratio -No unnecessary compressed air losses thanks to the integrated electronic condensate drain -Connected tools and machines are optimally protected -User-friendly operating concept Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria - Air flow rate l/min: 1200 l/min - Air flow rate m³/h: 72 m³/h - Maximum pressure: 16 bar - Air connection: 1/2" - Power consumption: 0.2 kW Dimensions and weights: - Length (product) approx.: 325 mm - Width/depth (product) approx.: 430 mm - Height (product) approx.: 445 mm - Net weight approx.: 24 kg

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Offered at a special price, but must be dismantled by the buyer Technical data: see photos Hedpfx Ahoxvivqs Usg Location: ex-site Saarland

Year of construction: 2011, condition: used, Rated power: 5.5 kW Motor speed: 2930 rpm Max. operating pressure: 11 bar Dryer type: CT 8 Refrigerant: R134a Refrigerant charge: 0.260 kg Max. operating pressure (cooling system) HP 21 bar / LP 16 bar incl. Aquamat CF 3 oil-water separator Storage location: supplier Hjdpfx Ahjxtnvko Uog

Condition: used, Folding machine, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, dryer, infrared dryer, powder coating -Handover: in its current condition as inspected -Connector damaged: see photos -Dryer: used for powder coating slat/blind manufacturing -Dimensions: 1650/570/H285 mm Hodpfx Aegbaareh Ueg -Weight: 124 kg

Year of construction: 2023, condition: excellent (used), functionality: fully functional, FIBIR FED 35 – Industrial Tumble Dryer in Excellent Condition For sale: High-quality industrial tumble dryer, model FED 35 from FIBIR – ideal for laundries, hotels, nursing homes, or service providers. 🔧 Technical Specifications & Highlights Manufacturer: FIBIR (Italy) – FED Series Model: FED 35 – Capacity approx. 35 kg Construction: Drum in stainless steel (AISI 304) Drive: Belt drive system Operation: Front control panel, simple and user-friendly Filter: Large, front-mounted, easily accessible stainless steel filter – ensures optimal airflow and reduces maintenance effort Year/Build: 2023 Condition: "Very good used", fully functional Location: 26810 Westoverledingen Used machinery ✅ Why choose this dryer? High capacity for large laundry loads – perfect for heavy-duty drying requirements Professional quality (stainless steel, robust drive system) – durable and easy to maintain Ready for immediate use – no general overhaul needed with good maintenance Good condition and proven model – a reliable investment ℹ️ Additional Information & Notes The sale is for a used item, price and terms by agreement Inspection possible by appointment – see for yourself on site Pickup or optional transport arrangement available Proper invoicing provided. Feel free to contact me with any questions, requests for more images, or to receive a short demonstration video. _____ Industrial dryer with stainless steel drum • Belt drive system • Controls located at the front, easy to operate • AISI 304 stainless steel filter easily accessible from the front; its large size ensures optimal air circulation and minimal maintenance 35 kg Operational, ready-to-use machines Listing and price refer to one machine // 2 units available Hjdpsxqh Afjfx Ah Uog

Condition: used, Year of construction: 2017, machine/vehicle number: A1711012, Pos.1 VEN CLEAN Smart dedusting systemCompressed air dedusting for cleaning the workpieces to be painted from dust on profiled workpiece surfaces. Five rotating blowing stars are installed. These remove the dust from the surface. The loosened dust is extracted on both sides by suction shafts. on both sides. An external extraction system is required on site. Technical data: Roller transport length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Total width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h To be provided by the customer Hedpju U Ryysfx Ah Usg Compressed air consumption: 980 Nl/min. Ionisation as nozzle bar, not EX) with compressed air nozzles, Compressed air consumption 840LN/min. Pos. 2 Automatic spray gun VEN SPRAY Comfort- Manufacturer Venjakob - Type. VEN SPRAY Comfort CNC 7000 - Year of construction 2017 - Working height approx. 930mm+-20mm - Working width 1300 mm - Operating side left - Price for overhauled machine - Actual condition, machine not overhauled - Gun drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 7,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2-6 m/min - With belt cleaning system with doctor blade in tungsten carbide design - With option to install a second beltcleaning system. Software and electric parts inside. - Gun control, touch screen CNC7000 - Installed colour circles 1 pc. (optionally more possible) - Supply air filter cover - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet, free-standing - Volt, Hz 400 / 50 - Colour RAL 7035 - Location, in stock Voltage fluctuations max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, KAESER TAH 6 Refrigeration Dryer - used - ----- Technical Data ----- Maximum pressure: 16 bar, Hedpfx Ahswziflo Ueg Power supply: 230 Volt

Year of construction: 2011, condition: good (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. Also available with material station and vacuum system if required. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Properties: Hedpfxsx Eifkj Ah Usg Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Condition: used, Year of construction: 2007, functionality: fully functional, • Machine type: Refrigerant air dryer for compressed air • Product designation: FD 2400 VSD • CE-marked: Yes (CE 0038) Manufacturer • Manufacturer: Atlas Copco Airpower n.v. • Place of manufacture: Wilrijk, Belgium • Brand name on housing: Atlas Copco Identification • Type: FD 2400 VSD • Serial number: AIF125258 • Year of manufacture: 2007 Electrical data • Supply voltage: 400 V • Frequency: 50 Hz Hjdpox Iub Esfx Ah Ueg • Power consumption: 3.5 kW • Phase: as indicated on the type plate (Ph, exact number not specified) Operating data • Maximum compressed air pressure (Pmax): 13 bar(g) • Maximum inlet air temperature (Tmax): 55 °C • Ambient temperature range: Max: 45 °C Min: 3 °C Cooling system • Refrigerant type: R404A • Refrigerant charge: 15 kg • Maximum refrigerant pressure (high pressure side): 29 bar • Refrigerant pressure (low pressure side): not specified Weight • Machine weight: 1,180 kg Control and interfaces • Control system: Elektronikon® (as indicated on the control panel) • Integrated display and membrane keypad on the front door

Condition: used, functionality: fully functional, working width: 850 mm, total height: 1,160 mm, total width: 748 mm, total length: 1,520 mm, noise level: 71 dB, battery capacity: 120 Ah, rotational speed (min.): 600 rpm, rotational speed (max.): 1,300 rpm, B 60 W BP DOSE (ROLLER) Walk-behind scrubber-dryer The B 60 W Bp Dose walk-behind scrubber-dryer is equipped with a drive motor, two maintenance-free 120 Ah batteries, and a user-friendly key system. This system enables simple and safe operation by controlling access and operating rights to protect against incorrect operation. The machine is ideal for cleaning textured floors and can cover areas of up to 2,500 square meters. The brushes can be quickly and easily installed and replaced. Thanks to the eco!efficiency mode, battery life is significantly extended, and the integrated tank rinsing system makes it easy to clean the dirty water tank after floor cleaning. Walk-behind scrubber-dryer (60 l) with drive unit. Ideal for 1000 - 2500 m². Energy-saving eco! efficiency mode Proven double disc technology ■ Brush heads can be quickly installed or replaced. Powerful drive motor ■ Comfortable driving with infinitely variable speed adjustment (forward and reverse). ■ Preset maximum speed. ■ Operation via drive levers directly on the handle. With cleaning agent dosing system. ■ With on-board cleaning agent dosing. ■ Precise and even dosing (adjustable up to 3%). ■ No contamination of the tank, as it is only filled with fresh water. Technical data Power supply V / Hz 100 – 240 / 50 – 60 Working width vacuuming mm 850 Fresh/dirty water tank l 60 / 60 Brush speed rpm 600 – 1300 Hjdpsx Hvvzofx Ah Ueg Brush contact pressure kg 37 Battery Ah 120 Battery type maintenance-free Battery charging time h 4.7 Sound pressure level dB(A) 71 Water consumption l/min 3.6 Drive type battery Drive traction motor Mains connection charger V / Hz 100 – 240 / 50 – 60 Dimensions (L × W × H) mm 1520 × 748 × 1160 Item condition: used, images may vary as there are multiple items available Quantity 1x Kärcher walk-behind scrubber-dryer B 60 W Bp Dose General signs of wear include all damage that can be expected due to age and mileage or operating hours. You can find more cleaning machines – new and used – in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2019, machine/vehicle number: 2019004345, enginetype: Electric, manufacturer: Dulevo Hjdex Rk Hvopfx Ah Uog

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Hodpfx Ahsxzprco Usg Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.

Condition: as good as new (ex-display), We have two identical units, these were designed to blow the water off pouches and ready meal trays which had been through retorts. Could be used to remove water from other wet packed products. Bought new in 2016 and only used for trials. Hjdju Infcspfx Ah Ujg

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Hjdpfew Uf S Hox Ah Uog

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 170 h, machine/vehicle number: 20356455, Exhibit: Renner RSDK-B 7.5 screw compressor system with integrated refrigeration dryer with galvanized 250 liter container with time-controlled condensate drain with controller RENNERtronic Touch Operating pressure: 10 bar Delivery rate at 10 bar (ue): 1020 l / min Rated power drive motor: 7.5 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 part 13): 78 dB (A) Length: 1397 mm Width: 617 mm Height: 1408 mm Weight: 311 kg Compressed air connection: G 1/2 " Compressed air tank (ECN according to AD2000): 250 l volume, galvanized Power connection refrigeration dryer: 230 V AC Pressure dew point refrigeration dryer + 3 ° C Time-controlled condensate drain Hsdjupz D Hspfx Ah Usg Visit our store. We always have a large selection of new and used compressors in stock!

Condition: used, Year of construction: 2018, functionality: fully functional, Punching machine, barely used, weight: 8500 kg. Lot includes steel cabinet with contents. Contents consist of tooling, spares and miscellaneous small parts. Hsdpfxoxzpvue Ah Ueg

Condition: used, Year of construction: 2015, Very professional and complete blasting cabin offered. In good condition. Brand: Straaltechniek. Equipped with elevator and screw conveyor for transporting the blasting media back into the pressure vessel. The extraction system features filter cartridges that are automatically cleaned. Dimensions: 5000 mm deep, 4000 mm wide, 3000 mm high. Hedpfxsx A Tuks Ah Ueg

Condition: good (used), Ceever Spraymaster Turning Spray Washer The Spraymaster series industrial washers are advanced solutions for spray cleaning small and medium-sized components with a capacity of up to 4000 kg. Thanks to a rotating table that ensures even wetting of the parts with the spray jet, these systems guarantee maximum surface treatment efficiency. Hedpsx Ex Nzefx Ah Usg Inside the treatment chamber, a channel system with strategically positioned nozzles enables complete spray cleaning of all surfaces, thus optimizing chemical, mechanical, and thermal processes in a single operation. Manufacturer: Ceever Type: Spray Master Turning Machine No. Z 429 Load: 500 kg/batch Voltage: 380 volts Current: 90 A Connected load: 62 kW Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available. Hedpfx Aexgr Hgoh Usg

Condition: used, Supply air unit type 3072 A 7300/3650 m³/h, max. heating capacity 83 kW, hot water 90/70 °C. Exhaust air unit type 72 7000/3500 m³/h. Storage location: Nattheim. Hjdpfxew I A N Ae Ah Usg

Condition: new, Year of construction: 2025, operating hours: 1 h, Screw compressor ALMIG BELT XP 8 - 10 bar (air cooled) include dryer include time drain include 2 filters include 270 liter tank galvanized Year 2025 / IMMEDIATELY AVAILABLE! Hedpfox Rb D Sex Ah Ujg Technical specifications Type: BELT XP 8 270 RD Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1.00 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 7,5 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 63 dB (A) Length: 1320 mm Width: 695 mm Height: 1898 mm Weight: 447 kg Compressed air connection: G 3/4 "

Year of construction: 2017, condition: good (used), Danmatic Spray unit spray glazing machine Hsdpfx Asuanvcoh Usg 2017, stainless, spray glazing machine, belt dimensions 2150mm x 820mm, stainless mesh belt, four top mounted spray jets, adjustable pressure controls, can work with a great variety of liquids from pure water to oil and glaze egg, mobile, 3Ph

Condition: good (used), Mectronics Maxi-Glaze spray glazer Hsdpfjv Rgudex Ah Ueg Stainless, spinning disk spray glazer, overall length 1480mm, max tray width 610mm, mobile, 3Ph

Condition: like new (used), Wrightfield Spray glazer Hsdpfsin Uvfex Ah Ueg Stainless frame, stainless mesh belt, belt width 850mm, variable speed, recirculation pump, mobile, 3Ph