Used Start Hole for sale (10,042)

Condition: used, mileage: 199,000 km, power: 115 kW (156.36 HP), first registration: 01/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 02/2027, color: red, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,963 mm, total width: 2,010 mm, total height: 2,660 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Storage compartment package, center console with storage compartment, map pocket with front cup holder, 13-pole trailer socket, trailer socket preparation, audio system: digital audio system (DAB+) with USB and Bluetooth hands-free system, audio/telephone controls on the steering wheel, roof storage compartment with DIN compartment, digital tachograph, grab handle A-pillar, holder with USB connection (tablet/smartphone), rear door (opening angle 260/270 degrees), wooden floor in the cargo area with wheel arch trim and high side wall/door trim, automatic climate control, cooling compressor 170 ccm, interior filter: pollen filter, comfort headrests in the passenger compartment, fuel tank: 90 liters, exterior loading light above the rear doors, LED cargo area light, cargo area partition with window, smoker's package, spare wheel in driving condition, spare wheel holder between the floor longitudinal members, reversing aid with sensors, seats in the cab: driver's seat comfort (hydraulic) Additional equipment: Driver's side airbag, traction control system (ASR), comfort dashboard blue, design: S-series, exhaust pipe on the side left, exterior mirrors electrically adjustable and heated, cargo area ceiling light, electronic brake force distribution, rear axle suspension: leaf spring, front axle suspension: transverse leaf spring, wing doors at the rear, front and side windows tinted, generator 180 A, speed limiter system 160 km/h, urea tank (AdBlue): 20 liters, body/structure: high-roof van with overhang, instrument cluster with pixel matrix display, radiator grille blue, headlight range adjustment, engine 2.3 liters - 115 kW diesel SCR, wheelbase 3520 mm, tire repair kit, low emission according to Euro 6 emission standard, headlight bezel blue, sliding door cargo/passenger compartment right, seats in the cab: passenger single seat, 3-way adjustable, start/stop system engine, control unit overhang, maintenance indicator, permissible total weight 3.50 t The vehicle is in good condition! 2 units in stock! Pgjdpfxo Agf Sde Abuju Valid TÜV (German vehicle inspection) until 02-2027.

Condition: used, mileage: 165,000 km, power: 132 kW (179.47 HP), first registration: 12/2020, fuel type: diesel, overall weight: 7,200 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 8,800 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 2,510 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, Special equipment: Pede Agf Ihjpfx Abujgu Storage compartment in the headliner of the cab, storage compartment on the dashboard with USB connection, front axle load 2.7 t, audio system: digital audio system (DAB) with USB and Bluetooth hands-free system, body manufacturer interface, rear differential lock, automatic climate control, steering column (steering wheel) adjustable in height/length, light and rain sensor, switch for lighting in the cargo area, rear cross member at the end of the frame, mud flaps at the front, seats in the cab: luxury driver's seat, Traction Plus (electronic traction control) with hill descent assist, auxiliary heater (hot water) with timer control Additional equipment: Airbag on the driver's side, trailer stabilization program (TSM), trailer socket preparation, anti-slip regulation (ASR), version: C-series, exterior mirrors electrically adjustable and heated, exterior mirrors long, for vehicle width 2350 mm, brake assistant, electronic brake force distribution, driving assistance system: hill start assist (AAS), driving assistance system: emergency braking assistant AEBS + City Brake, driving assistance system: lane monitoring assistant proactive (LDWS), digital tachograph, front axle suspension: torsion bar spring, windshield and side windows tinted, generator 210 A, transmission automatic - Hi-Matic (8-speed), grab handle A-pillar, urea tank (AdBlue): 20 liters, body/superstructure: standard flatbed, fuel tank: 90 liters, engine 3.0 liters - 132 kW diesel, wheelbase 5100 mm, spare wheel in driving tires, low emission according to emission standard Euro 6d, seats in the cab: double passenger seat, maintenance indicator, permissible total weight 7.00 t, twin tires on 2nd axle / rear axle Palfinger tail lift, 1000 KG Interior cargo area: L 6.20 W 2.46 H 2.51 meters Payload: 2600 KG Financing possible

Condition: new, GALVANIZED PALLET RACKS FOR OUTDOOR USE Hot-dip galvanized pallet racks for outdoor use Pgodpfx As Agf Ugsbuju Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 16.80 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 007 x upright approx. 450 cm x 110 cm, pre-assembled. - 024 x crossbar approx. 270 x 14 x 5 cm, T30. - 048 x Locking pins. - 048 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 54 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 3550 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: used, mileage: 12,350 km, power: 90 kW (122.37 HP), first registration: 09/2024, fuel type: electric, axle configuration: 4x2, wheelbase: 2,720 mm, fuel: electricity, color: grey, gearing type: mechanical, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, electronic stability program (ESP), hill-start assist, navigation system, onboard computer, parking heater, power mirror, seat heater, sliding door, tire pressure monitoring, traction control, = Additional Options and Accessories = - Attention Assist - Automatic low beam headlights - Heated exterior mirrors - Passenger airbag - Hands-free system - Electric front windows - Driver airbag - Speed limiter - Height-adjustable driver's seat - Height-adjustable front seats - Keyless entry - Keyless start - Air conditioning - Collision avoidance system - Comfort seats - Front head airbags - Leather gear knob - Lumbar support - Metallic paint - Multifunctional steering wheel - Radio with DAB - Rain sensor - Rear view camera - Front side airbags - Sliding door on the right side - Heated front seats - Lane keeping assist - Immobilizer - Insulated glass - Traffic sign recognition - Connected services - Adjustable steering wheel - WiFi preparation - Partition = Additional Information = Number of doors: 2 Unladen weight: 1,596 kg Payload: 634 kg Gross vehicle weight: 2,230 kg Max. towing capacity: 1,350 kg (unbraked 750 kg) Interior: black APK (Technical Inspection): valid until 09/2028 Number of keys: 2 Pjdpfx Ae Agc H Robusgu

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? Pgjdpfx Abe Agfkasusu - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: used, mileage: 97,000 km, power: 90 kW (122.37 HP), first registration: 11/2017, fuel type: diesel, overall weight: 3,100 kg, next inspection (TÜV): 03/2026, color: white, gearing type: mechanical, emission class: euro6, loading space length: 2,750 mm, loading space width: 1,600 mm, loading space height: 1,330 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Special equipment: Audio navigation system NAC 3-D, DAB with color display, parking assistance system front and rear including reversing camera, increased payload, tailgate, fixed rear window, wooden floor in the cargo area with anti-slip profile and side paneling (wood) with wheel arch lining, cargo area partition with window, sound and heat insulation, side airbags front, auxiliary heater Additional equipment: Airbag driver/passenger side, double passenger seat, on-board computer, driver assistance system: hill start assist, body/structure: panel van, lumbar support for driver's seat, adjustable, steering column (steering wheel) adjustable, engine 2.0 L - 90 kW Blue-HDI FAP, wheelbase 3275 mm, spare wheel with road tires, low emissions according to emission standard Euro 6, sliding door right, SCR system (AdBlue technology), side protection strips in body color, visibility package, driver's seat adjustable in height, seat cover / upholstery: fabric, steel rims 7x16, start/stop system, socket (12V connection) in the cargo area, socket (12V connection) in the center console, seat heating Pgodo Agf Iwopfx Abueu The vehicle is in good condition! Internal dimensions of the cargo area: L 2.75 m, W 1.60 m, H 1.33 m Last inspection at 96,028 km FIXED PRICE, minor hail damage to the hood Only 1 vehicle key Financing possible via Santander Bank

Condition: used, mileage: 139,000 km, power: 77 kW (104.69 HP), first registration: 07/2017, fuel type: diesel, overall weight: 3,140 kg, next inspection (TÜV): 08/2026, color: red, gearing type: mechanical, emission class: euro6, number of seats: 6, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Body/structure: Panel van double cab standard, LED cargo area lighting Additional features: 3rd brake light, overhead storage compartment in cab, driver’s airbag, traction control system (ASR), audio system: radio/CD player with multi-function display, electrically adjustable and heated exterior mirrors, integrated indicator lights in exterior mirrors, rubber flooring in cargo/passenger area (fully covered), onboard computer, headliner in passenger area, tachometer, electronic brakeforce distribution (EBD), electronic differential lock (EDS), driver assistance system: hill start assist, driver assistance system: emergency brake assist, sliding window in cargo/passenger area: 1st row left, sliding window in cargo/passenger area: 1st row right, 165 A alternator, grab handle B-pillar, rear wing doors without glazing (180-degree opening angle), heater with recirculation function, interior filter: pollen filter, Isofix child seat fixtures, body/structure: high-roof panel van, body variant: medium-high roof, silver radiator grille, partition wall behind 2nd seat row, steering column (steering wheel) adjustable in height and reach, headlight range adjustment, truck registration, engine 2.0 litre – 77 kW TDCi CAT, front and rear parking sensors, manufacturing location: Otosan, wheelbase 3300 mm, full wheel covers, spare wheel matching tire size, low-emission according to Euro 6 emissions standard, right-side sliding door in cargo/passenger area, wide side protective moldings (body cladding), seat package 13: driver's seat (4-way adjustable) – double passenger seat, fabric, seats in cargo/passenger area: 1st row, 3-seat bench, partially painted bumpers, Trend trim, integrated rear step, tinted glazing, half-height trim in cargo/passenger area, second folding remote key. Pgsdpfo Agf Nmex Abuju The vehicle is in good condition. New TÜV and emissions test available at an additional cost!

Condition: used, Stanzkraft: 550 kN (e.g. punches holes 30 mm in 16 mm material), with locating device via foot pedal to anchoring Psdjt Exprepfx Abuogu Cuts 350 x 13 mm or 230 mm on the flat bar shear Overhang: 305 mm Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Support table on punching side Assortment of tools is included in the price

Condition: as good as new (ex-display), functionality: fully functional, This single-sided heavy-duty cantilever rack is ideal for storing heavy long goods such as pipes, profiles, metal bars, steel beams, wooden strips, and sheet material. With a total length of approximately 13.20 meters, a height of approximately 4.00 meters, and cantilever arms of approximately 120 cm, this long goods rack offers a high storage capacity across a total of 4 storage levels (floor level + 3 levels). Each cantilever arm supports up to 500 kg, and the uprights can support up to 2,250 kg. The cantilever arms are bolted on and can be flexibly adjusted in height via a hole grid of 200 mm. The completely hot-dip galvanized material ensures long-lasting protection both indoors and outdoors – new goods available from the Wietmarschen warehouse. PRODUCT DETAILS: - Rack type: single-sided heavy-duty cantilever rack - Total length of the rack row: approx. 13.20 m - Total height: approx. 400 cm - Arm length: approx. 120 cm (made of IPE 80) - Center distance (upright spacing): approx. 131 cm - Levels: floor level + 3 storage levels - Load capacity per arm: max. 500 kg (with uniform distribution) - Load capacity per upright: max. 2,250 kg (with uniform distribution) - Upright profile: IPE 160, approx. 400 cm, including base - Hole grid upright: approx. 20 cm - First hole above base: approx. 107.5 cm (from top of base) - Top hole pair: approx. 50 cm below the upright head (from top of head) - Design: single-sided, cantilever arms bolted on - Surface: completely hot-dip galvanized - Availability: new goods SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm made of IPE 160, including base, hole grid 20 cm - 33 x cantilever arms, approx. 120 cm made of IPE 80 (without end stops) - Including all connecting elements - Including all necessary screws - 1 x load sign Price: €5,750.00 net €6,842.50 gross Pgsdpfx Abo Agghtjuou You will receive an invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams is optionally available - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding offer for you – tailored to your individual requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice on your rack configuration. Haven't found the right one yet? Visit our website – here you will find a quick overview of many offers and variations of the products! ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company website. You can reach us by telephone from Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: reconditioned (used), functionality: fully functional, power: 110 kW (149.56 HP), Equipment: documentation/manual, Complete refurbished Amandus Kahl C35-780 pellet press production line Complete production line featuring a fully refurbished Amandus Kahl C35-780 pellet press. Pgsdpfs Agk Rijx Abueu The Amandus Kahl C35-780 pellet press has recently undergone a complete overhaul at the Amandus Kahl factory. All documentation for the newly replaced parts is available. An overview of these parts can also be found among the photos. The production line consists of: - Amandus Kahl C35-780 pellet press - New 110 kW electric motor on the pellet press - Electrical control cabinet with emergency stop, including complete electrical documentation - Conveyor belt - Screening and cooling system that screens the pellets and cools them automatically - Hydraulic nut - Roller head in perfect condition - Including electrical wiring - Feed screw that transports the material to the pellet press - Automatic dosing system that measures the amount of pellets for filling, for example, a big bag - 4 extra dies with 6 mm holes - 60 liters of extra synthetic oil Overview of the parts replaced during the overhaul: - 7 new bearings - 2 new wear rings - 1 new air filter - 2 new oil seals - 1 new oil filter - 1 new oil pump - 20 liters of synthetic oil 800/460 - 1 new pressure piece for the main shaft Do you have any questions or would you like to inspect the complete production line? Please feel free to contact me. Sincerely, Danny van Tol Inventtol B.V.

Condition: used, mileage: 150 km, power: 125 kW (169.95 HP), first registration: 10/2026, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,100 mm, loading space width: 2,050 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Are you looking for a different model, engine, dimensions, or other features? Please feel free to contact us. We offer financing and leasing at attractive terms - also for the Netherlands, Austria, and new businesses! ----Vehicle: Wheelbase: 4325 mm * 6-speed manual transmission * Single cab * Twin rear tires * Gross vehicle weight 5 tons * Digital tachograph 4.1 * Speed limiter 90 km/h Technology/Comfort: Digital radio * Acoustic package * Apple CarPlay/Android Auto * MBUX multimedia system * Smartphone integration package * Air conditioning – “Tempmatic” * Cruise control * Electrically adjustable and heated exterior mirrors * Multifunction steering wheel adjustable for height and inclination * Light sensor * 93L main fuel tank * 22L AdBlue tank * Driver's single seat with armrest * Comfort driver's seat * Double passenger seat * 3-seater * Seats in black leatherette * Hill start assist * Preparation for toll system * Central locking with remote control * Electric front windows Safety: * All-season tires * Reinforced front axle * Side wind assist * Lane keeping assist * Rain sensor * Intelligent speed assist * Reversing warning * Fog lights with cornering function * Attention assist * Battery main switch * Halogen headlights * Outline lights * Side marker lights * Adaptive brake light * Seatbelt warning system Refrigerated box: * Insulation 80 mm / 100 mm * Floor reinforced with anti-slip structure * Two rear doors with separate locking mechanism and 270° opening angle * Side door with separate locking mechanism and step * Combination anchor lashing rail (1 left & 1 right) * 1 lashing strap * Interior and exterior LED lighting * Roof spoiler * Drain holes in the front of the box * Double sealing system on the loading openings * Reversing camera * Side underrun protection * Wheel protection with mud flaps Refrigeration unit: * ThermoKing V500X (-20°C to 20°C) * Driving and standby cooling Podpfx Abowq Umtjusgu * With heat pump * Temperature recorder (thermograph) * ATP certificate available Tail lift: Dhollandia * DH.LM10 * Load capacity 1000 kg * Plate depth 1800 mm * Roll-stop protection * LED warning light * Remote control with spiral cable * Trailer coupling 3.5 t trailer load (trailer hitch, 12V 13-pin trailer socket) Additional extras related to the bodywork are available at an extra cost. ----Note: Please call us briefly before your visit so that we can ensure your desired vehicle is on site. If it is not in Wachtendonk, we will gladly deliver it from our inventory. Individual customization upon request. Your vehicle partner since 1996. Call or email us now - we look forward to hearing from you! No liability for printing and typographical errors. Errors and prior sale reserved. Best regards, Pimenta Automobile

Condition: used, This listing is for a CS Cleaver Scientific LTD The Cube Dry Bath - 01 TCDB----- Cleaver Scientific TCDB – The Cube Dry Bath The Cleaver Scientific TCDB, known as "The Cube Dry Bath", is a compact, digitally controlled dry bath incubator designed for accurate and efficient sample heating in laboratory environments. It is ideal for a variety of applications, including enzyme reactions, nucleic acid denaturation, and other temperature-sensitive protocols. ----- Technical Details Condition: The TCDB is in excellent working condition with minimal use. Specifications: Model: Cube Dry Bath Incubator (Single Block Unit – Block Not Included) Voltage: 240V (unit spec), also listed as 110V, 50–60 Hz – please verify power compatibility Temperature Range: 5°C above ambient to 150°C Temperature Stability: ±0.2°C Temperature Uniformity: ±0.2°C Incremental Control: 0.1°C Timer: Up to 99 hr : 59 min, with continuous operation option Heated Power: 125W Controller: Digital Microprocessor Controller Pgodpexzh Shefx Abuou Weight: Approx. 2.1 kg Block Material: Molded Aluminum Alloy Block Dimensions: 79 x 104 x 50 mm Display: Dual LCD (temperature & time shown simultaneously) Safety Features: Leak-proof chamber, over-temperature protection, SSR fault detection Includes: Cleaver Scientific TCDB Cube Dry Bath Power Cord ----- Applications Ideal for use in: Restriction enzyme digestion DNA denaturation Coagulation studies Melting agar Hybridization procedures Hot Start PCR® BUN (Blood Urea Nitrogen) assays Incubation with water (mini water bath functionality)

Condition: used, mileage: 150 km, power: 120 kW (163.15 HP), first registration: 10/2026, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,500 mm, loading space width: 2,100 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Are you looking for a different model, engine type, dimensions, or other specifications? We offer financing and leasing at attractive conditions – also available for Austria, the Netherlands, and new business founders! Vehicle: * Wheelbase: 3640mm * 6-speed manual transmission * Single cab * Twin rear tires * Gross vehicle weight: 5 tons * Digital tachograph 4.1 * Speed limiter 90km/h Pgodsy Trq Iepfx Abuju Technology/Comfort: * Infotainment Composition * Apple CarPlay / Android Auto * 10" Touch-color display * Navigation system * 4 speakers * Bluetooth * Digital radio DAB+ * 12V socket in the center console * 2x folding keys with remote control * 4x USB-C ports * App-Connect Wireless (or via cable) * Manual air conditioning * Double passenger seat with storage compartment * Digital cockpit * Automatic windshield wiper control * Cruise control * Fuel tank 75L * Reinforced front axle * Central locking with keyless start * Storage package 2 * Lockable, illuminated glove compartment * Preparation for We Connect & We Connect Plus * Electrically adjustable and heated exterior mirrors * Multifunction steering wheel * Driver's seat "Comfort" Safety: * Summer tires * Front airbags for driver and passenger * Front Assist * Lane keeping assist * Hill start assist * Side marker lights * Electronic immobilizer * Direct tire pressure monitoring system * Tool kit and jack * Daytime running lights * Spare tire * Parking assistance front and rear * Driver fatigue detection * Emergency call system "eCall" * Start-stop system * Electric parking and emergency brake * Reversing warning sound * Extended exterior mirrors Refrigerated box: * Insulation 80mm/100mm * Non-slip floor surface * Reinforced floor * Two rear doors with separate locking system and 270° opening angle * Side door with separate locking system and step * Combination anchor lashing rail (1 left & 1 right) * 1 lashing strap * Interior and exterior lighting LED * Roof spoiler * Drain holes in the front of the box * Double sealing system at the loading openings * Side underride protection * Wheel protection Refrigeration unit: * ThermoKing V500X (-20°C to 20°C) * Driving and stationary cooling * Thermograph * ATP certificate possible Tail lift: Dhollandia * DH.LM10 * Load capacity 1000kg * Platform depth 1800mm * Roll-off safety * LED warning light * Remote control with spiral cable * Trailer coupling 3.5t trailer load (trailer coupling ball, trailer coupling socket 12V 13-pole) Additional extras for the body can be obtained for an extra charge. Note: Please call briefly before your visit – we will ensure that your desired vehicle is on site. If it is not in Wachtendonk, we will gladly deliver it from our stock. Customized bodywork possible on request. Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! No liability for printing and typographical errors. Errors and prior sale are reserved. Best regards Pimenta Automobile

Year of construction: 2021, condition: good (used), 1 complete granulation line, cutting/compacting/extruder combination, tangential, since 2021 only operated in a single shift using production waste, including DPE ground material/aluminum (pipe material). System consisting of: Pedpfx Abszb Dr Sjusgu Hydraulic roller cutter, 140 cm width, for roller diameters up to 60 cm, 18.5 kW drive. Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with timer. Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic slide, rotor with 74 reversible cutting blades, discharge and inclined conveying screw. Roller feed for heavy rolls with cutting device in the longitudinal direction to relieve the mill, frequency inverter-controlled drive, 3.5 kW. Cutting mill with 11 kW, downstream for parallel operation with shredder/roller feed, suction/conveying fan to the buffer silo with agitator, frequency inverter-controlled for discharge rate/dust protection. Feed screw for ground material. Conveyor belt, L 9 m x W 80 cm, metal detection bridge, frequency inverter controlled via load detection from the cutting compactor. Conveying screw for 100% ground material, stainless steel, L 4.5 m and diameter 100 mm. Cutting compactor, 138 kW, frequency inverter controlled, suction fan, water spray cooling, tangential to extruder ES 180 mm 30 LD with 2-stage vacuum degassing, including: Laser filter LF with diameter 500 mm / 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh 2x, 70 mesh. Strand die, 26 holes - interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts in January 2026. Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023. Strand granulator SG 200 E with 7.5 kW as well as 1 spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work. Granulate classification sieve, stainless steel, including conveying fan and pipes. BIG BAG filling frame, 2-place, with ladder and platform. BIG BAG floor scale with receipt printer. Throughput material-dependent, up to 900 kg/h. Start-up, commissioning by our technicians, details and costs upon request - after consultation. Inspection in Wuppertal, appointment can be arranged shortly.

Condition: new, New, unused ABB soft starter from the PSR series for three-phase motors. Manufacturer: ABB Type: PSR3-600-70 Product type: Soft starter Article number: 1SFA896103R7000 Series: PSR Rated operating current Ie: 3.9 A Operating voltage Ue: 208 to 600 V AC Control voltage Us: 100 to 240 V AC Frequency: 50/60 Hz Motor power at 230 V: 0.75 kW Motor power at 400 V: 1.5 kW Motor power at 500 V: 2.2 kW Pgjdpfxozb Niis Abuou Circuit type: In-line connection Phase control: 2-phase Start/stop ramp: adjustable via potentiometer Start/stop ramp time: 1 to 20 s Start voltage: 40 to 70 % Output signal: RUN relay output Bypass: integrated Main circuit connections: L1, L2, L3 / T1, T2, T3 Control circuit connections: ST, A1, Run, A2 Dimensions: 45 x 140 x 114 mm Net weight: 0.4 kg Manual: available Condition: NOS (New Old Stock)

Condition: good (used), Year of construction: 2019, functionality: fully functional, Design: Tabletop machine - Manual operation via 2-hand start - Ergonomic working with comfortable mushroom-shaped push buttons - Innovative emergency stop on the machine table - Emergency stop lighting visualizes machine status - Machine table 300 x 300 mm - Overhang (to the center of the sonotrode) 197 mm Model: FUSION CONSOLE P 1 Deflection-free machine stand - Patented brackets for maximum parallelism between the sonotrode and the workpiece - Ensures drive tracking for a stable process SERVO DRIVE 1 Fully electric servo drive - Height adjustment completely electric - Freely selectable start position for the shortest cycle time - High speed up to 240 mm/s - Stroke 300 mm with absolute position measurement POWER PACK P 1 High-precision force measurement with force sensor - Force 5 – 1000 N Pgsdpozil I Aefx Abuju - Fast force control over the entire force range PROCESS MONITORING 1 Welding process control model FUSION - Industrial PC with 17.3" color touchscreen - Welding types: distance relative, distance absolute, energy, time, power - Amplitude, force, or speed profiling with up to 5 steps - Comprehensive quality control with graphical display - Reliable monitoring of welding and process parameters - Easy setting of tolerance limits with setup assistant - Sequence setup for clear configuration of additional functions - 25 user levels with password protection - Productivity overview with piece and shift counters - Recipe management for up to 300 welding parts 1 UPS – uninterruptible power supply - Secure process documentation even in the event of a power outage 1 Standard control cabinet with electrical components and main switch - Dimensions approx. 450 x 600 x 300 mm PRODUCTIVITY 1 Vibrating tool holder, screwed - With indexing of the sonotrode alignment - Ergonomic holder made of aluminum - Easy replacement of the entire vibrating tool 1 Adjustment plate - Size 280 x 280 mm - Easy planar-parallel alignment of the workpiece to the sonotrode - Universal hole pattern for easy fixing of the fixture CONNECTIVITY 4.0 Comprehensive connection options and machine interfaces - Variable interfaces for up to 4 peripherals - USB & LAN connection for easy process data processing - Troubleshooting and assistance via remote service from MS Service Ultrasonic: 20 kHz with 1000 W 1 Digital ultrasonic generator soniGEN 20 /1000 - Frequency 20 kHz - Power 1000 W - Amplitude stabilization - Automatic sonotrode scan - Load compensation 1 Piezoelectric ultrasonic converter soniCON 20 kHz - Protection class IP54 - High-quality HF connector 1 Amplitude transformation piece soniAMP 20 kHz - Ratio 1:1 - Material: Titanium Please refer to the data sheet for technical specifications.

Condition: good (used), Year of construction: 2008, functionality: fully functional, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit (with contact roller for calibration work (steel)) Roller diameter: 250 mm Belt speeds: approx. 18 m/s 22 kW Anti-wear braking unit, automatic band length adjustment Dust extraction system controlled depending on the workpiece, counter-rotating abrasive belt, abrasive belt grit compensation by computer Belt speeds: 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Pgsdpfxjx Rdn To Abusu Drive: 15 kW Includes continuously adjustable sanding speed via electronic frequency inverter, with double number of extraction holes for the dust extraction device. Anti-wear braking unit, automatic band length adjustment for abrasive belt edges potentially of different lengths; dust extraction controlled by workpiece detection, deactivatable, counter-rotating abrasive belt. 2 Pressure beams with selective pressure adjustment system – CSD® system Continuously adjustable individual pressure elements, for single and multiple workpiece feeding. Spacing: 32 mm. Tolerance compensation for workpieces up to 2 m by maintenance-free pressure magnets. Working width as well as start and end positions of the pressure beam are electronically adjustable. The pressure elements are driven by lifting electromagnets capable of continuously varying the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology guarantees constantly proportionate pressure relative to pad overlap on the workpiece. The risk of sanding through on the edges is virtually eliminated by this dynamic, continuous pressure force control.

Condition: used, mileage: 150 km, power: 120 kW (163.15 HP), first registration: 10/2026, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,100 mm, loading space width: 2,050 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Are you looking for a different model, engine, dimensions, or anything else? Feel free to contact us. We offer financing and leasing at attractive conditions - also for the Netherlands, Austria and new entrepreneurs! Vehicle: * Wheelbase: 4490mm * 6-speed manual transmission * Single cab * 3 seats * Twin rear tires * Gross vehicle weight 5 tons * Speed limiter 90km/h * Digital tachograph 4.1 Technology/Comfort: * Infotainment package "Discover Media" * 10" touch-color display * Navigation system * 4 speakers * Bluetooth * Digital radio DAB+ * Light and Visibility Package * LED headlights * 12V socket in the center console * 2x folding keys with remote control * 4x USB-C ports * Manual air conditioning * Digital instrument cluster * Automatic windshield wiper control * Cruise control * Fuel tank 75L * Reinforced front axle * Reinforced suspension and stabilizers * Central locking with keyless start * Multifunction display "Plus" * Storage package 2 * Lockable, illuminated glove compartment * Electrically adjustable and heated exterior mirrors * Multifunction steering wheel * Driver's seat "ergoComfort" * Reinforced AGM battery and generator * Robust fabric upholstery "Marathon" * Fog lights with cornering function * Battery switch * Electrical connection rail Safety: * Winter tires * Front airbags for driver and passenger * Traffic sign recognition * Front Assist * Lane keeping assist * Hill start assist * Side marker lights * Electronic immobilizer * Tool kit and jack * Daytime running lights * Spare wheel Refrigerated box: * Insulation 80mm/100mm * Non-slip floor surface * Reinforced floor * Two rear doors with separate locking and 270° opening angle * Side door with separate locking and step * Combination anchor lashing rail (1 left & 1 right) * 1 lashing strap * Interior and exterior lighting LED * Roof spoiler * Drain holes in the box front * Double sealing system on the loading openings * Rear view camera * Side underrun protection * Wheel arch protection Refrigeration unit: * ThermoKing V500X (-20°C to 20°C) Pedpjw E Akijfx Abuogu * Driving and parking cooling * Thermograph * ATP certificate possible Tail lift: Dhollandia * DH.LM10 * Load capacity 1000Kg * Platform depth 1800mm * Roll-off protection * LED warning light * Remote control with spiral cable * Trailer coupling 3.5t trailer load (trailer coupling ball head, trailer coupling socket 12V 13-pole) Additional extras for the superstructure are available at an extra cost. Note: Please call briefly before your visit - we will ensure that your desired vehicle is on site. If it is not in Wachtendonk, we will gladly deliver it from our stock. Individual customization possible upon request. Your vehicle partner since 1996. Call or email us now - we look forward to hearing from you! No liability for printing and typographical errors Errors and prior sale excepted Kind regards Pimenta Automobile

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: Psdpswc Afhofx Abujgu SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled Psdpfx Ajwc Ri Iebujgu SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption Pjdpswc Rk Ejfx Abuogu One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Year of construction: 2025, functionality: fully functional, laser power: 20 W, Model 2025 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer Pgodpfx Abouxnwmjuju - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Condition: new, Bernardo Universal Lathe Titan 660 x 3000 Technical Specifications Distance between centers: 3000 mm Center height: 330 mm Swing over bed: 660 mm Swing over gap: 900 mm Swing over cross slide: 460 mm Bed width: 400 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1-8 Speed range: (16) 25 - 1600 rpm Longitudinal feed range: (25) 0.044 - 1.48 mm/rev Cross feed range: (25) 0.022 - 0.740 mm/rev Metric threads: (54) 0.45 - 120 mm Inch threads: (54) 7/16 - 80 TPI Tailstock quill diameter: 90 mm Tailstock quill travel: 235 mm Tailstock taper: MK 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (W x D x H): 4630 x 1200 x 1520 mm Approx. weight: 3300 kg Features • Versatile use in general mechanical engineering, production, single-part manufacturing, etc. • Central, user-friendly control for feeds and threading with leadscrew and feed shaft • Prism bed made of cast iron, inductively hardened and precision ground • Modern main spindle bearings with precision angular contact roller bearings • Hardened and ground gears and shafts, also in the feed gearbox • Rapid traverse longitudinal and cross as standard to reduce non-productive times • Large spindle bore (105 mm) for machining workpieces with large diameter • Smooth start-up via mechanical multi-plate clutch • Electromechanical foot brake to reduce non-productive times Psdpfx Aoxxayfjbuegu • Optimal cutting performance even during facing operations • Bed reinforced with robust ribs to stiffen the guideway and minimize vibration influences Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • Slip clutch • Rapid traverse longitudinal and cross • LED machine light • 3-jaw steel chuck PO3-315 mm / D8 • Face plate 450 mm • Fixed steady rest – through hole diameter max. 180 mm • Travelling steady rest – through hole diameter max. 120 mm • 2 live centers • Motor with magnetic brake to CE standard • Foot pedal with brake function to CE standard • Initial filling with Shell Tellus 46 • Coolant system • Quick-change tool post with 4 holders • Safety device for quick-change tool post • Change gears • Reducing sleeve • Chip guard rear panel • Cable management via energy chain • Operating tools

Condition: used, mileage: 387,522 km, power: 302 kW (410.61 HP), first registration: 09/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, loading space volume: 42 m³, loading space length: 6,600 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Equipment: ABS, air conditioning, crane, navigation system, parking heater, * Sun visor * ABS * TCS Traction Control System * Radio * On-board computer * Cruise control * Electric window lifters * Electrically adjustable mirrors * Mirror heating * Driver comfort seat * Seat heating * Rear axle differential lock * Steering axle * Roof spoiler * Trailer coupling * Duomatic air connection * ESP * Navigation system * Reversing camera * Auxiliary heater * Hill-start assist * Central locking * Brake cruise control * Lane departure warning system * Cool box * 12-speed * Suspension: air * Payload: 8100 kg * Permanent brake: retarder ----Special body: Crane: Palfinger PK 27002-SHE (Power Links Plus), max. lifting capacity 7.9 t, foldable, 6x hydraulic extension + Jib PJ 060 A with 2x hydraulic extension, working height approx. 26.6 m, radio remote control, fully hydraulic 4-point outriggers, oil cooler, 6th + 7th control circuit to front. Read load chart: Lifts at 4.4m-5.3t, 6.3m-3.4t, 8.2m-2.45t, 10.3m-1.84t, 12.4m-1.46t, 14.5m-1.22t, 16.7m-1.04t, 19.8m-0.52t, 21.5m-0.46t, 23.3m-0.42t. ----Body: flatbed, sliding tarpaulin left + right, hardwood floor, lashing holes, hydraulic lifting roof. Podsx Uu Aiopfx Abuogu Sale to business customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT + ACCESSORIES. The basis of all purchase contracts, invoices, pro forma invoices, orders, and sales negotiations are our General Terms and Conditions (see imprint).

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 940 mm, total length: 1,760 mm, door opening width: 670 mm, door opening height: 500 mm, scan area length: 175 mm, scan area width: 175 mm, travel distance Z-axis: 400 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, space requirement width: 920 mm, space requirement height: 940 mm, laser wavelength: 1,070 nm, space requirement length: 1,760 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, Fiber Laser System for Professional Marking and Engraving of Metals and Plastics. Equipped with SK-LASER Workstation, Laser Class 1, and automatic lifting door. Laser Class 1 · CE · Made in Germany System & Lifting Door: - Complete system: IPG fiber laser + workstation + electric lifting door Process Sequence: - Start → Door closes → Laser process → Door opens automatically - Door opening approx. H 500 × W 670 mm - Access protection via safety control Laser – IPG (Made in Germany): - Power: 20 W - Pulse energy: 1.0 mJ - Pulse duration: 100 ns - Frequency: 20–80 kHz - Wavelength: 1060–1070 nm - Beam quality M² < 1.2 - Air-cooled, < 400 W Optics & Scanner: - F-Theta lens f = 254 mm - Marking field 175 × 175 mm - Pilot laser + 2 distance lasers - Manually adjustable laser head (Y-axis) Control: - Windows 11 Pro, SSD, 23" monitor - Interfaces: Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR codes, variable data, parameter management Workstation 1 – Laser Class 1: - Seated/standing workstation, aluminum housing - Work surface 710 × 400 mm, 25 mm hole grid - Dimensions 1760 × 920 × 940 mm Motorized Z-Axis (400 mm) - Extraction port DN50 Podpfsyimpasx Abuogu - Safety (PL4) - Emergency stop - 2-channel interlock Safety relay - Rear service door (when open: Laser Class 4) Operation: 230 V / 50 Hz 15–35 °C Condition: - New machine - CE · Made in Germany