Used Straight Edge for sale (6,629)

Condition: excellent (used), Edgebander SCM K360 R HP Fluids Pre-milling cutters, Glue application by roller, Interchangeable glue tank Additional glue tank Pneumatic pre-cut guillotine, Fluids End trimming saws angle-adjustable for finishing Top/bottom milling unit (multi-cutter R1-R2), Corner rounding unit, Dcodpfexva Tmex Adaop Profile scraper (multi R1-R2), Cleaning fluids Flat scraper, Polishing unit, The machine features NC cutter control and pneumatic package, Max workpiece height 60 mm, Max edge thickness in roll 3 mm, Feed speed max 11 m/min, Machine in very good condition. Original mileage: 65,000 meters

Condition: good (used), Year of construction: 2007, Max. pane height: 2700 mm. Connected load: 400V AC/50Hz/3.1A Dodpfx Asxq Rp Iedaocp Total length with inlet and outlet: approx. 7700 mm. Max. height: approx. 4200 mm. Weight: 2550 kg. Condition: good, second-hand.

Condition: used, Holz Her STREAMER 1054 FÜ + PU Edge thickness 0.4 - 6 mm Modern control with selector switch for adjusting the units Pre-milling unit for attaching before the gluing part Fully automatic edge magazine for rolls and strips Glue application station GLU-JET cartridges + PU gluing Glue application using nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment High-quality 3-roller printing unit, 1st roller motorized Cutting unit pneumatic. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° bevel of the mitre saws pneumatic milling unit, flush milling 6 mm, radius milling - chamfer milling - 15°, pneumatic via control panel scraper unit for chamfers and radii with 2 scraper holders pneumatic engagement and disengagement surface scraper unit - finish Dcodpfxsxu E Nwe Adaep spraying device - PU machine is WORKSHOP REFURBISHED in TOP CONDITION

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: Function tested Equipment and technical data: Glue pot with roller End trim shears Pressure zone End trimming saw Combination milling unit Surface scraper Chassis Edge material thickness: 0.5-3 mm Min. workpiece width: 90 mm Min. workpiece thickness: 10 mm Max. workpiece thickness: 45 mm Min. workpiece length: 50 mm Edge material overhang top and bottom: 2.5 mm Edge material overhang front and rear: 10 mm Location: Hesse Availability: End of November/beginning of December 2025 Djdpfx Asxllvledaecp

Condition: excellent (used), Bargain from liquidation with feed and oscillation Dcedpoxn Skzjfx Adajp

Condition: ready for operation (used), functionality: fully functional, Equipment: UVV, Aluminium roof edge protection complete with all accessories. Total coverage for 198 meters. Including trailer; a special hoisting frame has been manufactured for this trailer. On-site inspection possible! Dodpfxexg Thfo Adajcp

Condition: good (used), Year of construction: 2001, functionality: fully functional, working width: 800 mm, overall weight: 185 kg, Turning-in machine Dedsxmtc Nopfx Adascp

Condition: excellent (used), CATALOG NUMBER: 7404 TECHNICAL DATA - Minimum workpiece thickness: 16mm - Maximum workpiece thickness: 60mm - Height to table surface: 920mm - Motor power: 1.2kW - Voltage: 400V - Disc – guillotine – feed rollers for tape – glue tank – 3 guide rollers (first one is the drive roller) - Worktable: 1600x670mm - Dimensions (L/W/H): 1600x1400x1100mm - Weight: 170kg ADVANTAGES – Polish manufacture Dcodpfet H E Iksx Adasp – Suitable for edging both straight and curved edges – Used machine, in very good condition Net price: 5,900 PLN Net price: 1,400 EUR (based on 4.2 PLN/EUR exchange rate) (Prices may change with significant fluctuations)

Condition: used, Holz Her Perfect 1422 K + PU Heavy-duty version, for edge banding up to 20 mm thickness Fully automatic roller magazine – crosscut shear Fully automatic edge magazine for strip material Cartridge + PU gluing station Flush trimming Multifunction milling unit, flush – chamfer – radius milling with mechanical digital adjustment Dcodpfx Adoxurqbjaop Soundproof enclosure CE-compliant design Machine is FUNCTIONALLY TESTED and in VERY GOOD CONDITION available ex-stock Lieboch

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Equipment and technical data: - Base machine with manual pressure bridge adjustment - Extendable workpiece support - Joint milling unit FG 201 with 2 milling heads - Edge feeding with single infeed, automatic transport of roll and strip material - Glue application system Glu Jet GJ 301, automatic glue height adjustment (sensing nozzle) - Pressing unit 1912-3 pneumatic Dsdpfoxllvrjx Adaecp - Pneumatic trimming unit 1918 (60 mm) - Extraction hoods for trimming unit - Multifunction milling unit FR 201 - Corner copying unit 1832 for up to 3 mm edge thickness - Scraper unit 1929 - Chip collection box - Flat scraper 1964 - Buffing unit 1940 - Complete spray device 1856 Minimum workpiece length: 160 mm Workpiece thickness: 60 mm Edge thickness: 0.4-6 mm Feed rate: 10 m / min Overall length: 4630 mm Weight: 1250 kg The extraction bridge shown in the pictures is not included in the scope of delivery! Location: Hesse Availability: approx. December 2025

Condition: refurbished (used), Year of construction: 2017, EDGEBANDER WITH NUMERICAL SETTINGS WITH EDGE DRESSER (ROUTER) & ROUNDING UNIT Brand: SCM Type (Model): K 360 HP-T-ER1 Serial no.: AH/120944 Ref: 123304 Year: 2017 (Photos taken before overhaul, before functional tests & before cleaning) MACHINING CAPACITIES : - Height of panel to be machined: 8 - 58 mm Thickness 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum width of panel to be machined: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - StarTouch control - Predisposition for barcode reading - Ø800 mm unwind tray - Front extension - Easy size: digital positioning of infeed guide and feed height - Non-stick spray unit - Edge straightener (RT-V) 12000 rpm - Infrared panel preheating at infeed - Gluing unit (VC-VM) with interchangeable glue container Dodpfx Adsrx S Ipeascp for 1 kg granules. Heating time 12 minutes Pneumatic pre-cutter Digitized positioning (pressing) with 3 rollers including 1 motorized and timed roller - Tilting butt-cutting aggregate 0-20° 12000 rpm - Digitized positionning top/bottom trimming unit with copying. Milling cutter 1/4 round 2 mm (or chamfer) 12000 rpm - R2mm rounding aggregate 12000 rpm with digitized positionn. - Scrapers R1&2 mm top/bottom with digitized positions - Straight scrapers top/bottom - Edge finishing spray device (Nebulization) OTHER FEATURES : - Grinder motors: 2x2 kW - Cutting motors: 2x 0.19kW - Up/down motor: 0.30 kW - Drive motor: 1.1 kW - Milling motor group: 2x 0.65kW - CE marking - Lockable contactor, Mushroom stops - Power supply: 380v. Three-phase 50 Hz - Pneumatic supply: 8-10 bars (max), dry air - Suction: 1x Ø100 and 5x Ø80 mm Heads: 780 m3/h Trimming 360 m3/h Scrapers 2x360m3/h Max. foreseeable footprint in running order : 10.80 x 2.40 m Transport dimensions (WxDxH) : 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with assembled tools, manual, spare parts list and drawings. On order, the machine will be overhauled and brought up to standard, with inspection and dynamic functional testing.

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,160 mm, fork length: 1,150 mm, empty load weight: 123 kg, total length: 1,530 mm, drive type: Elektro, construction width: 540 mm, Low lift truck Load centre of gravity: 600 Fork width: 160 mm Fork thickness: 47 mm Gearbox: Electromechanical Condition: New device Technical condition: New Front tyres type: Polyurethane Rear tyres type: Polyurethane Battery voltage: 24V Battery Ah: 20Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2025 Description: - Pin code access - Discharge indicator and operating hour counter, - Lithium battery - Spring-loaded side support rollers D80x30 - Tandem load rollers D80x70 Dcodpfx Adjvw Eyleasp

Condition: used, Year of construction: 2007, Jointing cutter 1. Milling station R=2.5 Combination unit Corner rounding cutter R=2 Surface scraper Profile scraper Pneumatic milling adjustment (Straight / Radius) PLC control with Pro-face touchscreen Swappable tank Prepared for special feature: maximum workpiece thickness 60 mm (without jointing) Storage location: Supplier Djdpfx Aoxnlacedascp

Condition: excellent (used), Tabletop Edge Bander JAROMA + Edge Trimmer with Cutting Unit Catalog No. 7729A Edge Bander Equipment: - Band plate - Glue tank (granulate) - Tape feeder - Guillotine – preliminary trimming of edging - Pressure rollers: 2 pcs - Min. width of workpieces: 50 mm - Thickness of workpieces: 10–40 mm - Min. internal radius: 50 mm - Edging at an angle with 1 mm thick tape: 0–45° - Edge thickness: 0.3–3 mm - Electric feed - Total power: 2 kW - Compressed air pressure: 6–7 bar - Dimensions (L/W/H): 1700x1300x1550 mm - Weight: 310 kg Djdoxa Eh Dopfx Adaocp Edge Trimmer: - Min. width of workpieces: 50 mm - Thickness of workpieces: 16–40 mm - Edge thickness: 0.5–3 mm - Motor power: 1.1 kW - Air requirement: 6 bar - Extraction nozzle: 60 mm - Dimensions (L/W/H): 1900x850x1450 mm - Weight: 290 kg Cutting Unit: - Blade diameter: 150 mm - Table dimensions: 750x820 mm - Motor power: 0.12 kW / 2800 rpm – Polish manufacture – Unpainted – DTR documentation – Very good condition – Used edge bander Net price: 11,000 PLN Net price: 2,620 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: used, Holz Her Sprint 1317-1 FÜ + PU heavy-duty design – edge thickness 0.4 – 5 mm SPS screen control large LCD display pre-milling unit before gluing area fully automatic edge magazine for coil and strip material glue application station for cartridges + PU gluing maximum edge height 51 mm automatic glue height adjustment press unit 1913, motorized pneumatic trimming unit for coils and strips with pneumatic adjustment for miter saw angle from 0–10° multifunctional milling unit 1942 MOT 2 milling unit with motorized adjustment axes for various radii – chamfering – flush milling via SPS copy milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm scraping unit for chamfers and radii pneumatic infeed and outfeed finish – surface scraper Dedpoxuhpajfx Adaocp regular maintenance by Holz Her machine is FACTORY SERVICED, in EXCELLENT CONDITION available from stock in Lieboch

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Equipment and technical specifications: Machine completely overhauled and serviced Feed speed steplessly adjustable from 10–18 m/min Edge Control 19 control with 18.5" touchscreen color display Jointing milling unit Edge feeding unit Glue application station: cartridge with sensing nozzle, with automatic glue height adjustment Pressure unit End trimming unit Multi-function milling unit Corner copying unit Radius scraper unit Flat scraper Buffing unit Workpiece thickness: 6–60 mm Dcjdpfx Ajwka N Tjdajp Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: short notice

Condition: good (used), Machine nr: 306/ F Planing boards 45mm types: FKF G-6 Dodpfx Ajhcz S Dodaecp

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,160 mm, fork length: 1,150 mm, empty load weight: 123 kg, total length: 1,530 mm, drive type: Elektro, construction width: 540 mm, Low lift truck Load center of gravity: 600 Fork width: 160 mm Fork thickness: 47 mm Gearbox: Electromechanical Condition: New device Technical condition: New Front tires type: Polyurethane Rear tires type: Polyurethane Battery Volt: 24V Battery Ah: 20Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2024 Dsdpfx Aeucg Trsdascp Description: - Pin code access - Discharge indicator and operating hours counter, - Lithium battery - Sprung side support rollers D80x30 - Tandem load rollers D80x70

Condition: good (used), CNC Machining Center HOMAG OPTIMAT BAZ 222/40/K with Edge Banding Unit and Loading Gantry Djdpfx Adsxmvtqoaecp Electronically controlled milling, edge banding, post-processing, and drilling center for the production of furniture parts, solid wood, or similar materials. Two independent Y-axes for the main spindle and edge banding unit Clamping table with 8 clamping consoles Y-1300 mm with hose-free vacuum guidance POWER CONTROL with PC85 controller Software: WoodWOP 5.0 Main spindle: 7.5 kW 12-position carousel tool changer Interface for automatic tool change of machining units with integrated pneumatic/electric/electronic supply and C-axis drive Drill head with 17 spindles Cross-cut saw unit 360-degree edge banding unit / for strip materials: rolls Edge thickness: max. 2 mm with veneer; max. 3 mm with plastic Chip removal conveyor Vacuum pump Busch MM 1322 A, 300/360m3/h (replaced in 2013)

Condition: excellent (used), CATALOG NUMBER 7730 TECHNICAL DATA Milling Machine: - Minimum width of workpieces: 50mm - Workpiece thickness: 16-40mm - Edge thickness: 0.5-3mm - Motor power: 1.1kW - Air requirement: 6 bar - Extraction nozzle: 60mm - Dimensions (L/W/H): 1900x850x1450mm - Weight: 290kg Trimming Unit: - Blade diameter: 150mm - Table size: 750x820mm - Motor power: 0.12kW / 2800rpm ADVANTAGES – Polish-made Dodpfx Adsxa Egmjajcp – Trimming unit – Profiled cutters included – Unpainted – DTR documentation – Used milling machine, in very good condition Net price: 4500 PLN Net price: 1070 EUR depending on a rate of 4.2 EUR (Prices may vary with significant rate fluctuations)

Condition: used, OTT Tornado FÜ + PU SPS-compatible control, 7" TFT touch color display CM-CombiMelt for EVA and PUR hot melt adhesives Pre-milling unit – jointing Fully automatic roller magazine Fully automatic edge magazine Pneumatic flush trimming 0–3° Flush milling – 12 mm Radius milling R-2, R-5 Bevel milling 0°/15°/30°/45° Corner rounding Radius scraper Flat scraper Soundproof cabin with room extraction Dcodpjxt N E Hjfx Adaep Cleaning set with spray unit, fine buffing device, and glide agent spraying unit – PU First delivery 2008 Machine is FACTORY REFURBISHED in TOP CONDITION Available from stock Lieboch

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: The machine has been completely overhauled: - new Glue Jet 301 gluing system (top part 1 mm) - all units checked - all cutters sharpened - all knives replaced Electrics for stepless feed: 400 V / 50 Hz, 2.2 kW Motorized pressure bridge adjustment Automatic chain lubrication PPC 315 control system with 15" touchscreen ECO MODE energy saving function Infeed fence 1350 mm, motorized adjustment Jointing milling unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 milling units for edge jointing - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation for jointing unit Edge feeding unit 1901 fully automatic Glue application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - Granulate hopper Pressure unit 1913 MOT End trimming unit 1918 (60 mm) pneumatic Multi-functional milling unit 1826 MOT4 (2 x 0.65 kW): Dcodjwka Iispfx Adajp - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left-hand rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right-hand rotation Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left-hand rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right-hand rotation with CM technology Scraper unit 1929 MOT2: - HW reversible knives for scraper holder R = 2.5 mm (2 pcs required) Flat scraper 1964 Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short notice Location: 65439 Flörsheim

Condition: excellent (used), Catalogue number: 7531 TECHNICAL DATA Equipment: Dcjdpfovtl Tqjx Adajp - Disc - Tape feeder - Guillotine - Glue tank (granulate) - 3 pressure rollers - Trimming unit with final saws - 2 milling units for edge shaping (radius cutters) - 2 polishers Minimum length of workpiece: 140mm Minimum width of workpiece: 60mm Thickness of the edged workpiece: 10-55mm Edgebanding tape thickness: 0.4-3mm Extendable support from the table Motor power: 5.6kW Extraction port diameter: 120mm Dimensions (L/W/H): 3480x1050x1020mm Weight approx.: 900kg - Not repainted - Austrian manufacture - Year of production: 2007 - Condition: very good - Used edgebander Net price: 18,900 PLN Net price: 4,500 EUR Net price calculated with an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Dodpjw I U E Ajfx Adaecp Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: used, Used machine Dodpjwwxykefx Adajcp