Used Straight Edge for sale (4,839)

Year of construction: 2009, operating hours: 11,720 h, condition: used, functionality: fully functional, machine/vehicle number: 2008/065, 1 thread grinding support, 1 water groove support, 7 face grinding supports, 3 upper chamfers, 3 lower chamfers, table extension console, belt running direction from right to left. Nodpfxew Exx Ae Abvowd

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers Njdpfx Aorx S Ipebvswd - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit Nedpfx Asw I H Rksbvjwd With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 700 mm, height adjustment type: mechanical, total length: 17,000 mm, total width: 2,500 mm, total height: 1,000 mm, saw drive: 31,000 W, Double-edge circular saw with conveyor rollers from Paul Nedpfxewa T Dcs Abvswd Type: PKAH Year of manufacture: 1989 5-meter driven conveyor rollers 2 x 5-meter non-driven conveyor rollers With side-mounted board removal belt Total L x W x H: 17 x 2.5 x 1 meter Boards up to 70 cm wide and 16 cm thick can be edged. Width electrically adjustable. Height mechanically adjustable. 400 V Max. 63 A 31 kW Please contact us if you are interested or have any questions.

Condition: new, Edge and contour milling machine Make: Assfalg Model: KKE 1 condition: new machine Nwedebhfzbepfx Abved Speed: 8.000 - 24.000 rpm (infinitely variable) max. bevel width: 3 mm serially equipped with: - Guide rail - wrenches, open-end wrenches - Insert ring Ø 30 x 8 mm - Collet Ø 6 mm with union nut - Operating instructions

Condition: new, Deburring machine brand: Aboagye Model: AF 165 Condition: new machine Speed: 2,800 RPM maximum cutting width: 1 mm Nwodpfxsdurxne Abvsd equipped as standard with: -Special flap disc K80-ST -Suction nozzle -Manual

Condition: excellent (used), Robland KM 550 Edge Bander Glue application with roller Pneumatic pre-cut guillotine Pressure rollers Final trimming saws Top and bottom milling unit R1 – R2 Flat scraper Machine length with table: 210 cm Feed speed: 5.5 m/min Max edge thickness: 2 mm Nwedpfx Absyt Hu Hovod Max panel thickness: 40 mm Weight: approx. 450 kg Machine in very good condition, operates flawlessly. Inspection and test possible before purchase.

Condition: excellent (used), functionality: fully functional, Equipment: double-sided, Additional equipment: Seperating agent spray device on top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 - 2 rolls / Profile Trimming Unit FF12 on top/bottom with motors at 12000 rpm / Finish Unit FA11 on top/bottom / Stepless stop cams with maximum cam projection of 25 mm / Standard Trimming Unit SF20 6.6 kW / Rough Trimming Unit 0.55 kW PUR OTT 2kg Melting Station / Machine Benefits Technical Machine Benefits Workpiece thickness: 12 - 40 mm / minimum workpiece size (lxw): 250 x 240 mm / maximum workpiece size (lxw): 2500 x 1200 mm / maximum workpiece weight: 50 kg Roller material edge thickness: 0. 4 - 3 mm / maximum edge cross section (plastic): 135 mm² / maximum edge cross section (veneer): 100 mm² / maximum roller diameter: 830 mm Nwjdpfx Abexwui Eovod Longitudinal processing speed: up to 35 m/min for thin edge up to 0. 6 mm /up to 30 m/min for thick edge up to 3 mm Cross processing speed: up to 30 m/min for panel sizing/ up to 20 m/min for edge processing Minimum workpiece gap: 500 mm

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 17000-21007552412, input voltage: 230 V, laser power: 30 W, Only 2 years of test operation – climate-controlled residential environment – no exposure to dust or workshop conditions The Epilog Fusion Edge 12 on offer is a professional CO₂ laser system designed for precise engraving and cutting applications in continuous operation. This unit was used exclusively for testing and development purposes over a period of just two years and was always located in a climate-controlled residential space. It has never been in a workshop environment, nor exposed to dust, thermal stress, or dirt, resulting in an almost factory-new condition. The machine has been maintained regularly by cameo Laser and is ready for immediate use. Inspection and a full functionality test are available at any time. Technical Specifications: - Model: Epilog Fusion Edge 12 - Laser Source: 30 W CO₂ "WaveGuide" - Working Area: 610 × 305 mm - Maximum Engraving Speed: 3 m/s (5G) - Maximum Material Height: 178 mm - IRIS™ Camera Positioning System - Autofocus + 2" Focusing Lens - Red Pilot Laser - Honeycomb Cutting Table - LED Interior Lighting - Large Safety Glass Viewing Window - Air Assist incl. Compressor - Laser Class: 2 - Connections: USB, Ethernet, Wi-Fi - Touchscreen + Joystick Control - 1 GB Internal Memory - SAFEGUARD Mechanical Protection - Mobile thanks to integrated castors Vacuum Extraction System vacuair UML 340 edge (included) Recirculating Air Base Unit: - 3-stage filtration (HEPA H14, pre-filter, 15 kg activated carbon) - Airflow: 340 m³/h - Separation Efficiency: >99% - Serial Number: 50138217001 - Very quiet operation – ideal for indoor spaces Accessories & Documentation: - Air Assist Compressor Nodjyqxngopfx Abvowd - Camera Calibration Plate - Cleaning and Maintenance Accessories - Fusion Edge Software (CD) - Printed User Manual - Original Invoice (Initial value: €22,105.98) Condition & Usage History: - Only 2 years of test operation - Used exclusively in a climate-controlled residential environment - No exposure to dust, dirt, or workshop conditions - Very low operating hours - Regularly serviced - Excellent optical and technical condition, almost as new - Ready for immediate use

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: C-261-04-2523, functionality: fully functional, feed rate X-axis: 9,000 m/min, saw blade diameter: 100 mm, rotational speed (max.): 12,000 rpm, Submitting a bid obliges you to collect the item by the deadline of 14.10.2025! TECHNICAL DETAILS Edge Processing Edge type: Straight edges Edge material: Cut-to-size strips, lip cuts, coil material Feed speed: 9 m/min Edge material thickness: 0.4–3.0 mm Lip thickness: 0.4–3.0 mm Edge material height: 55 mm Coil diameter: 800 mm Rotation speed: 12,000 rpm Max. tool dimensions: 100 × 62 × 30 mm Extraction port Ø: 120 mm Workpiece Data Workpiece thickness: 8–50 mm Positioning accuracy: 0.1 mm Edge Banding Edge type: Straight edges Edge material: Coil material Max. tape cut: 3 × 30 mm or 0.8 × 45 mm Operating pressure: 6 bar Edge Glue Applicator Rotation speed: up to 1,800 rpm End Trimming Unit Motor speed: 12,000 rpm Saw blade diameter: 100 mm Cutting width: 2.6 mm Bore diameter: 32 mm Workpiece thickness: 45 mm Max. edge material height: 3 mm Edge material angle: 0–15° Edge material cross-section: 135 mm² Nwodsxhgk Aepfx Abved Flush Trim Unit Rotation speed: 12,000 rpm Max. workpiece thickness: 8–50 mm Max. edge thickness: 3 mm Straight tools: 2 × WPL milling cutter Ø 50 × 12 × 16 mm, z = 4 Combination tools r = 3 mm: 2 × Trimmer Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Fuse protection: 16 A Control voltage: 24 V

Condition: good (used), Year of construction: 2006, functionality: fully functional, PRAWEMA 2005 204 HS-W PRAWEMA 2006 SYNCHROFINE 205 HS Nsdpfovm Efaex Abvewd

Condition: used, machine/vehicle number: 008370, X axis working area: 5055 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 19 KW Number of controlled axes: 5 axes Maximum edge height: 60 mm Total number of drilling spindles: 28 Nedpex A Tk Sofx Abvewd Total number of tool changer positions: 31

Condition: excellent (used), CATALOG NUMBER: 7404 TECHNICAL DATA - Minimum workpiece thickness: 16mm - Maximum workpiece thickness: 60mm - Height to table surface: 920mm Nwjdpfsymd Scjx Abvod - Motor power: 1.2kW - Voltage: 400V - Disc – guillotine – feed rollers for tape – glue tank – 3 guide rollers (first one is the drive roller) - Worktable: 1600x670mm - Dimensions (L/W/H): 1600x1400x1100mm - Weight: 170kg ADVANTAGES – Polish manufacture – Suitable for edging both straight and curved edges – Used machine, in very good condition Net price: 5,900 PLN Net price: 1,400 EUR (based on 4.2 PLN/EUR exchange rate) (Prices may change with significant fluctuations)

Condition: used, TECHNICAL SPECIFICATIONS: – Length of feed rollers: 7800 mm – Roller width: 1430 mm – Roller diameter: 110 mm – Destacking system Njdpfxeymd I Ds Abvowd – Stacker width: 1540 mm – Package depth: 1430 mm – Package height: 1830 mm – Element collection with chains: 1600 mm x 1600 mm – Return of crossbars via belt conveyor: 3000 mm – Crossbar stacking up to 1370 mm at lifting height 1700 mm – Total length: 12 m

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, table length: 1,300 mm, table width: 4,200 mm, HOT PRESS FOR EDGE-GLUED PANELS ORMA MOD. LS 42/13 AS / BO – CE RULES - N. 10 press cylinders - N. 5 platen cylinders - N. 8 front cylinders - Top-down pressing system - Continuous working capability - 45 kW diathermic oil boiler - Platen dimensions 4200 x 1300 mm - Complete with loading/unloading system - 250 mm glue spreader Njdpfx Ajywcg Isbvjwd - Year 2005

Year of construction: 2011, condition: used, functionality: fully functional, • Band running direction: LEFT to RIGHT, year 2011 #2010037 • 10 face grinding supports, 130 & 150 mm, with vertical oscillation • Horizontal oscillation for material thicknesses up to 100 mm • 1 lower & 1 upper chamfer milling support Nedpfx Aeyruvcebvjwd • 2 pneumatic lower & 2 upper chamfer supports • Belt infeed: motorised calibration/profile support • Belt outfeed: motorised drip rail support • Table widening console • Space requirement approx.: 725 x 180 cm

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-200-07-9819, Type: KAL210 / EDITION Machine no.: 0-200-07-9819 Year: 2011 Single-sided machine for machining straight workpiece edges. Edge banding and post-processing of various edge banding materials, in through feed lengthwise and crosswise. POWER CONTROL control PC22 Control system Windows PC Hardware: PLC control Integrated stretch control for contact-free control of the machining units Operating system Windows XP Industrial PC 10" TFT monitor with touch screen, selection and setting of all necessary production parameters, such as: program selection and workpiece thickness adjustment. PC keyboard and mouse USB connection Network connection Remote control Setting operation, start feed, emergency stop switch Unit equipment: Nwodpfeyn Ilpox Abvod -Release agent application unit -Joint milling unit -Glue unit A20 with 2 rollers -Cutting unit HL84 -Pre-milling unit -Shape milling unit FF32 -Universal milling unit UF10 -Profile sanding unit PN10 -Finishing unit (glue joint sanding unit + polishing brushes) Technical data Minimum workpiece width: for thicknesses 12-22 mm, 60 mm for thicknesses 23-40 mm, 105 mm Workpiece overhang 30 mm Workpiece thickness 12-60 mm Molding material on roll 0.3-3 mm Molding cross-section max: For PVC 135 mm2 For veneer 100 mm2 Molding material strips 0.4-20 mm Edge cross-section for strips 900 mm2 Working height 950 mm Pneumatics 6 bar Power 400 volts, 50 Hz, 3-phase NOTE Subject to incorrectly published technical data.

Condition: used, sanding belt measurements 2.260 x 150 mm Motor output 1,5 kW table: schwenkbar Dust suction hood 100 mm Nwjdpewffpbefx Abvsd

Condition: new, The KF 200 is a robust Edge Beveling Machine from KNUTH, designed for efficient chamfering, deburring, and 45° beveling of steel, aluminum, and a variety of other materials. Its compact dimensions and simple operation make it particularly well-suited for large workpieces, including heavy metal sheets and long profiles. With tungsten alloy blades, the KF 200 offers superior tensile strength, hardness, and longevity, ensuring that demanding tasks are executed with precision. This machine operates at a speed of 3,500 revolutions per minute and can achieve chamfer heights ranging from 0 to 5 mm, making it versatile for different applications. Standard equipment includes a set of cutting inserts and an operator manual, allowing you to start working immediately. Whether you're preparing weld joints or performing intricate deburring tasks, the KF 200 stands out in the Edge Beveling Machines category. To enhance your production capabilities, request a quote today and elevate your sheet metal processing with KNUTH. Nwsdoq Ny R Sjpfx Abved

Condition: new, Year of construction: 2025, The KANTENKING is the most favorable edge processing solution for creating the zero joint for the trades with feed speeds from 10m / min, as well as in the industrial sector, with high speeds up to 22 m/min. The Kantenking HTK3030 has a speed of max. 22 m/min.. Nwodpfx Asd Dczzjbvod Your edge edger is still "in good condition", but you have already heard a lot about the null joint and ask yourself, if this is also suitable for you. You can retrofit the HOT-AIR system in any existing edge banding or BAZ. The Hot-Air-System has low maintenance and reliable. You tell us your wishes and machine data. So we can together with you and your ideas make an offer for the optimal product. Feed speeds up to 22 m/min. are possible. The Hot-Air-System is optimally integrated in your edge banding or machining center. Please don't hesitate to contact us.

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. Nwjdjx D Dq Sspfx Abvsd Application Types Complete Production

Condition: used, Year of construction: 1978, sheet width . mm plate thickness . mm serial number 20719 total power requirement . kW weight of the machine ca. 1,4 t Nwsdeucgvajpfx Abvod

Condition: like new (used), Year of construction: 2019, Demonstration machine in as-new condition. See documentation. New PHT: €21,000.00; front: €11,800.00. Nedpfxeyk T Ibe Abvewd

Condition: good (used), Leonhard Kurz Model H Book Edge Gilding Machine This machine is in very good condition and ready to use. This machine is from the popular Leonhard Kurz manufacturer, manufactured in Germany. Description This edge gilder is suitable for books, cards, invitations, and business cards. Hand-operated clamp, powered by only 230V. A powerful clamp with adjustable pressure ensures repeatability. The machine features a convenient material clamp, depth adjustment, and a convenient base with wheels. Specifications: Mechanical clamping mechanism Power consumption: 170W Power supply: 230V Nedpfx Aboyrz S Dovowd Machine weight: 80kg

Condition: used, Hydraulic Horizontal Straightening Press, Horizontal Press STENHOJ Type 40 Horizontal hydraulic press for straightening work on steel beams or welded structures Serial no. 42615 Year of manufacture: 1984 Refurbished in 2025 Pressing force: 40 tons Ram stroke: 300 mm Piston rod diameter: 80 mm Working height: 780 mm (floor to center of piston rod) Table size without pressure pads: approx. 1000 x 290 mm Installation dimension, ram + press block to counter bearing: 260 mm (with pressure pads on ram and counter bearing) Installation dimension, ram without press block to counter bearing: 440 mm (without pressure pads on counter bearing) Height of the two adjustable pressure pads: 130 mm Pressure pad width: 220 mm Advance speed: 10 mm/s Return speed: 20 mm/s Nwodpfsydqd Hox Abvjd Hydraulic tank capacity: approx. 60 liters Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Cylinder stroke operated manually via an actuation lever, sensitive control via mechanical control valve - Pressing force readable via pressure gauge - Ram stroke position with actual value display, digitally readable, ideal for precise repeatability of pressure points during straightening - 2 adjustable counter bearings via threaded spindle (centric parallel adjustment from 290 to 890 mm) - Straightening tools with rounded pressure faces - Infeed rollers for material support, centrally height-adjustable via handwheel (roller width = 250 mm) Required space (L x W x H): 170 x 140 x 100 cm Weight: 1250 kg In excellent condition