Used Streamfeeder Reliant 1500 for sale (4,367)

Condition: excellent (used), RMS Electrodynamic Vibration Test System Vibration Exciter SW 3006+ Power Amplifier TGA 1500 Technical Data: Sine: 3.7 kN Random: 3.7 kN Hsdehyly Repfx Aaaek Shock: 3.7 kN Stroke pk-pk: 26 mm Velocity: 0.9 m/s Acceleration: 80 g Cooling: air-cooled Condition: used Untested! Testing was not possible Scope of delivery: (see picture) (Changes and errors in the technical data may apply!) We are happy to answer further questions by phone.

Condition: used, table length 1500 mm table width 1500 mm table load 10 t Hedpfxsyuqf Es Aaaok voltage 380 V Heidenhain D.R.O. Additional plate on rotary table: 2.000 x 3.000 x 3.000 mm

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Caterpillar C32, General information Field of application: Construction Weights Empty weight: 11.481 kg Functional Generator capacity: 1.500 kVA CE mark: yes Other information Fuel consumption: 232.8 Liter / Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 6,669x2,45x2,789 Hjdpfx Aasx Dqnkoaok Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = RATING TYPE STANDBY: Output available with varying load for the duration of the interruption of the normal source power. Average power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage of 500 hours per year.

Condition: excellent (used), Year of construction: 2005, 1 used hot water boiler ----- - mounted on frame – Type: UT-L 14 Manufacturer: LOOS Output: 1,500 kW Permissible operating pressure: 6.0 bar Test pressure: 9.6 bar Permissible flow temperature: 110°C Water capacity approx.: 1,700 l Year of manufacture: 2005 CE mark: 0085 Equipped with Weishaupt combination burner, type GL8 / 1-D, Oil output 65–191 kg/h, gas output 400–2275 kW and control cabinet. Dimensions (approx.): Diameter incl. insulation: 1,500 mm Height: 2,000 mm Length: 3,400 mm Length with burner: 4,600 mm Hjdpfx Aeyrnhljaaek Shipping weight: 3.5 t

Condition: used, Year of construction: 2020, Technical details: turning diameter: 670 mm turning length: 1540 mm control: F31iB5 Celos Fanuc 35iB5 swing diameter max. over bed cover: 700 mm Travel turret No.1 (milling spindle) x/y/z: 495 / ± 150 / 1562(+164) mm Hodeyv E T Uepfx Aaask Rotation B-axis: -30° / +210° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/40/40 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 20,2/18,8 kW Torque of milling spindle: 120 / 44 Nm tool taper milling spindle: Coromant Capto C6 Tool magazine for milling spindle (turret 1): 76 Tool change time tool/tool, milling spindle: 1,25 s Spindle 1 RPM: 3000 1/min Spindle 1 Power: 36 / 30 / 25 kW C-axis spindle 1: 0,001 ° Bar capacity spindle 1: 102 mm Spindle 2 RPM: 4000 1/min Spindle 2 power: 26 / 22 / 15 kW C-axis spindle 2: 0,001 ° Bar capacity spindle 2: 80 mm dimensions of the machine ca.: 7,8 x 3,6 x 2,9 m Linear scales on axis: X, Y programmable steady: KLU-A530 & SLU-X3.2 Accerories Chip conveyor tool setting spindle load monitor Airblow system Airblow system internal to cutting tool Spindle 1 Chuck Kitagawa 250 (B 210) mm Spindle 2 Chuck Kitagawa 250 (B 210) mm Interface for coolant through the spindle 70 bar Tailstock specification for spindle 2 Measuring probe for work piece Renishaw OMP60 pendant hand wheel Parts and total counter Signal lamp 3 colors Robot interface Matris Robot System R-2000iC/165F Automatic door Rotoclear window Quick fixed cycles Program restart Signal lamp 4 colours Ethernet I/P Interface manual tool eye Automatic door Air Filter Oil skimmer Tactile sensor for workpiece measuring Airblow system external Subspindel Spindle 1 coolant jet Spindle 2 coolant jet Coolant Gun Coolant through spindle 70 bar with filter Knoll High performance turning and milling center with multi axis milling head, 76 tool magazine Capto C6, main- and sub spindle, which can act as tailstock. It has automatic door and Matris robot R-2000iC/165F. *

Year of construction: 2022, condition: used, Carsoe Group Anytray Buffer 1500 – Pneumatic Tray Buffer System Manufacturer: Carsoe Model: Anytray Buffer 1500 LLANONE Right Pneumatic Year of manufacture: 2022 Machine type: Tray buffer / product accumulation system Description The Carsoe Anytray Buffer 1500 is a pneumatic tray buffering system designed to temporarily accumulate and manage trays within automated food processing and packaging lines. The system helps stabilize product flow and prevents interruptions between processing machines. Built with hygienic stainless steel construction, the unit is suitable for demanding food production environments, especially in seafood and protein processing facilities. Technical Specifications - Manufacturer: Carsoe - Model: Anytray Buffer 1500 LLANONE Right Pneumatic - Year: 2022 - Power: 0.46 kW - Supply voltage: 230 VAC + N + PE - Frequency: 50 Hz - Air pressure: 6 bar - Max short-circuit current: 6 kA - SO-No.: FOD 220002 - Part number: P09390 Key Features - Pneumatic tray buffering system - Designed for stable product flow in production lines - Hygienic stainless steel construction - Suitable for high-capacity food processing environments - Easy integration into automated tray handling systems Applications - Seafood processing lines - Ready meal tray production - Automated packaging lines - Food processing plants Condition Hedpfx Aoyt Hu Tsaask Used .

Year of construction: 2000, condition: good (used), Cieffe FNCm 2.5/0.8/1500 hardening furnace chamber furnace 1120 °C Manufacturer: Cieffe Type: FNCm 2.5/0.8/1500 Max temperature: 1120 °C Series: 4185/1B Rated current: 70A 37 kVA 400 Volt Year: 2000 Maße: Außen (L x B x H) 3000 x 1480 x 1750 mm Brennkammer (L x B x H) 2600 x 270 x 100 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request! Hsdpfx Aenucgujaask

Condition: new, Sale exclusively within Switzerland. X-axis travel: approx. 1500 mm Y-axis travel: 740 mm Z-axis travel: 610 mm Distance from spindle nose to table center: 125 ~ 735 mm Table size (X-direction): approx. 1600 mm Table size (Y-direction): approx. 700 mm Hjdpfx Aaeywtpaoajk Table load capacity: approx. 1450 kg Spindle taper: BT 40 / BT 50 (optional) Spindle speed: Belt drive 10,000 rpm.

Year of construction: 2023, condition: as good as new (ex-display), functionality: fully functional, 2 units in stock, new machine warranty, warehouse stock, original packaging, immediately available With safety system for solvent-based substances according to DIN 1539. Matching charge trolleys in stock (see picture). Please contact us! Hodpfol Dw T Aex Aaask - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 260°C - Controller P570 / 50 programs with up to 40 freely programmable segments each - NtLog for controller: Data recording via USB stick - Air circulation: 3600 m³/h - Exhaust air volume: 390 m³/h - Additional equipment: Drive-in rails - Connected load: 39 kW - Net weight: 1150 kg - Incl. documentation, CE declaration We are happy to offer installation and commissioning. Viewing in our warehouse is possible by appointment. We supply new and used industrial ovens. Contact us! Oven, ovens, drying oven, kiln, heating oven, heated cabinet, industrial oven, tempering oven, preheating oven, annealing oven, temperature oven, drying cabinet, chamber oven, enameling oven, recirculating air drying cabinet, recirculating air oven, solvent oven, chamber dryer.

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Hsdpsyx E Tasfx Aaaek Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2019, operating hours: 2,200 h, functionality: fully functional, power: 90 kW (122.37 HP), Briquetting press Ruf RB 1500 Year of manufacture: 2019 Only 2,299 original operating hours Including storage silo Including extraction system / Alko mobile dust extractor Very good condition, no defects Briquette size approx. 27 x 10 x 10 cm Hjdpoyxfvzefx Aaajk Throughput approx. 900 kg per hour Motor power 90 kW

Condition: excellent (used), functionality: fully functional, Commissioning: as Okuma stock machine 09.2017 Control OSP P300S Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Bore Ø 112 mm Motor with 32 kW output Torque 955 Nm ▪ Hollow clamping cylinder Ø 127 mm SMW VNK 320-127 with bore Ø 127 mm ▪ Pressure reducing valve Adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: high-performance chip conveyor with low-maintenance self-cleaning function ▪ Drum sump filter TMF300 with clean tank 980 l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools for the lower turret) ▪ Automatic door ▪ Robot interface type E for connecting other loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in a CAM system Technical Details ▪ Main drive (Okuma motor spindle): 22 kW / 700 Nm / 50–4,200 rpm Hjdpfx Aeyviigsaajk Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2-stage Range switching at full speed ▪ Lower turret: 12 stations In ZB-axis with cylindrical roller guide In XB-axis with slide guide ▪ Real-time collision avoidance system CAS ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as touchscreen/panel with vertical display and tiltable keyboard (adjustable angle) ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° steps ▪ Y-axis with travel +150/-150 = 300 mm ▪ B-axis 240° Positioning in 0.001° steps ▪ Tool spindle (Okuma motor spindle): 22 kW / 120 Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. pressure 20 bar Including bag filter, external cooling tool spindle, pump with max. pressure 3 bar ▪ Tool system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement system (with standard chuck) for safe setup ▪ Machine management MacMan with integrated BDE (operating data acquisition) ▪ Parts program memory 2 GB ▪ Max. length individual part program 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation via periodic speed change ▪ Tool height correction in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection) ▪ Coordinate conversion (shift, rotate) ▪ Electronic spindle orientation + / - 0.1°

Condition: used, mileage: 309,000 km, power: 170 kW (231.14 HP), first registration: 02/2016, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2026, color: black, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,540 mm, loading space length: 6,100 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, Mercedes 1223 L/ Tail lift 1500 KG/ German vehicle/ 1 owner, tires approx. 60% remaining/ ALL MAINTENANCE AT MERCEDES/ Last at 285,000 km, all brakes new!! Hedsyvwv Uspfx Aaaek Audio system: CD radio (Bluetooth), battery 165 Ah, driver assistance system: brake assist (Active Brake Assist), driver assistance system: lane departure warning, alternator 100 A, urea tank (AdBlue): 35 liters, fuel tank: 180 liters plastic, roof spoiler (lockable), heated air dryer, extended rear frame, external acoustic reverse warning, tail lift control switch, external sun visor, cab socket 24V, lateral underrun protection, prepared for toll system. EURO 6 emission standard, axle configuration: 4x2, front axle load 5.3 t, approach/front mirror, exhaust tailpipe to vehicle center, electrically adjustable exterior mirror, left, classic cockpit, steel air reservoir, low compressed air unit, two-step entry, cab type: S ClassicSpace, cab version: ClassicSpace, suspension: leaf/air, front suspension: 4.4 t leaf springs, 6-speed transmission - type: G 90-6, manual lift roof (steel), rear axle crown wheel 390, info display 10.4 cm with additional indicator, body/chassis: chassis, engine 5.1 liter - 170 kW diesel (OM 934), engine brake, engine compartment encapsulation, wheelbase 4160 mm, disc brakes front and rear axles, seat cover/upholstery: fabric, cab seats: single passenger seat, fixed, cab seats: standard driver's air-sprung seat, rear fender mudguards, rear axle stabilizer, tachograph / EC control device, automatic daytime running lights, fixed rear underrun protection, front underrun protection, immobilizer, permissible total weight 11.99 t.

Condition: good (used), Lathe WAFUM Type TUD 40 Centre distance: 1500 mm Swing over bed: Ø 440 mm Centre height over bed: 220 mm Centre height over carriage: Ø 125 mm Spindle bore: Ø 56 mm Spindle speed: 18 - 1800 rpm, 36 steps Tailstock taper: MK 5 Drive power: 4 and 6.7 kW - Spindle speed via 2 motor speeds and 18 gearbox stages - Guide ruler for turning slender cones with automatic longitudinal feed Space requirement (L x W x H): 3100 x 1200 x 1450 mm Weight: 3000 kg Hjdpfxjyx Uv De Aaask Good condition

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm 500mm grinding wheel diameter Hsdpfsuwv Idjx Aaajk New servomotors in x and for the workhead. Photo of already delivered machine in UR equipment. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for training. -Diagnostic function with display of PLC information and digital I/O -Dressing function can be extended or changed at the customer's request. -Oriented spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Rotary encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -Increase of the center height to max. 225mm -Speed control for the grinding spindle Translated with (free version)

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-40 mm/Ø 0-40 mm/Ø ±6,5 ° longitudinal feed of the table 1530 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannung kg cross travel max. 270 mm 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of machine already delivered with special options -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. Hjdpfx Aajuxftrsaek -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm Hedpjuxfu Nefx Aaask - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm Grinding wheel left 500mm diameter Grinding wheel head fix. No swivelling possible. Hsdpot Ii Rfjfx Aaask With new control. With new enclosure Overhauled according to Kellenberger protocoll

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 143630, overall weight: 6,325 kg, This is a KUKA 1500/3 T linear unit for KRC4 robots Year of manufacture 2013 Hsdjtt Sbdjpfx Aaaek Total length: 17m

Condition: new, Year of construction: 2025, IMPACT 4in1 from stock Europe the IMPACT FL 1500 is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Hodpfxju Nf Nzo Aaask Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A weldong machine with extra functions as cleaning and cutting from 1,5 Kw together cust atlast 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders sothat welder can shift quickly. 1,5 and 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. we deliver in complete Europe, we have in Europe in 3 locations a sales and service organisation.

Condition: good (used), Pressure vessel 11 bar, 1500 Liter litre Hjdpsg A Hc Hsfx Aaajk

Year of construction: 2010, condition: good (used), Build in 2010 Flow Turn Cconveyor 45° belt conveyor, running direction left, with drive, infeed / delivery height : ca. 800 mm inner radius: 600 mm belt width: 600 mm Hodpfx Asg Ny Epeaajk

Year of construction: 2021, condition: new, The solution for a quick convenient tool change that an employee can do alone. We have now designed a changing table that can be transported and operated by a forklift, a small electric forklift or even a forklift truck with lifting device. Additional information a) Maximum tool size 1000 x 700 mm long b) Maximum tool weight 1.500 kg c) Minimum tool size 600x500mm d) Total height approx. 600 mm e) Fork insertion height of the forklift 60 mm f) Width of forks up to 210 mm g) Minimum distance between forks 300 mm h) Travel speed of the tool approx. 20-25 mm per second. i) Manual locking after the tool is loaded j) Electric cable length 5 meters. Hjdpfxehtfdtj Aaask k) motor class IE 3, with 2,2 KW, 400 V, 50 Hz l) Weight approx. 500 kg m) Incl. two anchor fittings on the table and two anchor holders for fastening to the press n) Built-in spirit level for leveling on the press o) Emergency switch, on-off switch, switch for forward travel, switch for reverse travel p) Machine body double painted

Condition: used, Year of construction: 1998, x-travel 1350 mm y-travel 650 mm z-travel 650 mm Control Heidenhain type TNC 426 milling-head swivable +/- 90 ° spindle taper ISO 40 table surface area 1600x800 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Hsdpfjyt R D Esx Aaajk About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2025, turning diameter: 410 mm, – Centre distance: 1500 mm – Swing diameter over bed: 410 mm – Swing diameter over gap: 580 mm – Swing diameter over cross slide: 255 mm – Spindle bore: 52 mm – 45–1800 rpm – Longitudinal and cross feed – Digital readout – Brake – Coolant system – Lighting – Safety guard – Fixed steady rest – Travelling steady rest – Three-jaw chuck – Four-jaw chuck – Multifix toolpost with 4 holders Hodpfsytadnjx Aaaok – Emergency stop – Documentation – 400V