Used Swiss Type for sale (38,378)

Condition: new, K’MX EVO with 7 axes has been designed for machining of parts from Ø 3 to Ø 32 mm. The highlight of this series is 2 oil-cooled electrospindles (built-in motor), with a power output of 10.5 kW on the main spindle. The stroke of the spindle is up to 400 mm. The two separate tools racks can simultaneously machining (ex roughing and finishing). Iisdpounr H Ajfx Am Djh The two separate tools racks can simultaneously machining (ex roughing and finishing). Optionally, both linear slides are equipped with driven tools to perform simultaneous drilling and milling. These 2 tools racks are complemented by end working attachment for internal operations with the possibility to turn simultaneously on the main and sub-spindle. In optional, possibility to mill thanks to ddriven tools. The large space permits better chip evacuation and maximum accessibility. - Rigid - Large working space - Up to 4 simultaneous cutting tools in contact - 2 independent racks with 5 positions

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much! Iisdpszw Apgofx Am Deh

Condition: good (used), Welded frame, used Manufacturer: CREA-SWISS Technical Data Brand: CREA-SWISS Max. frame size: 3,000 x 2,400 mm Min. frame size: 470 x 610 mm Profile height: up to 115 mm Height tolerance compensation: from -1 mm to +1 mm Iedpfxey At A De Am Doih Dimensions: L 3.6 x W 1.5 x H 2.0 m Weight: 280 kg Advantages - Single-operator device: set external dimensions, insert profiles, adjust height differences, and weld completely on both sides, all by one person - Precise adjustment for accurate frame construction - Rotatable around the longitudinal axis - Fully welded in a single clamping - Fine adjustment of miter edges - Mobile workstation on castors - Suitable for all types of frames (steel windows, fire doors, or angle steel frames) All information provided without guarantee. A demonstration is possible at any time in our showroom.

Year of construction: 1998, condition: ready for operation (used), A glass bottle washing machine PAC Swiss is available. Washing capacity: 7500bottles/h, cycle time: 6.72s, throughput time: approx. 12min, bottle types: Euro/NRW/Ale, bottles per row: 14, max. bottles in the machine: 1456, bottle volume: 330ml/500ml, process: preheating/caustic treatment/recooling/spraying, machine dimensions X/Y/Z: approx. 7050mm/1800mm/2300mm, operating hours: approx. 14175h. Documentation available. On-site inspection is possible. Iiodoyhgnispfx Am Dsh

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, CNC-controlled flank grinding machine for band saws • Grinding mist extraction fully integrated into the base machine • Equipped with a 4-axis CNC control system • Each movement can be controlled individually via stepper motors, resulting in minimal idle times Ijdpoz Hdpwofx Am Djih • The clearly arranged display also serves as an operating element via a touchscreen • The advanced saw tooth can be finished-ground multiple times in one position • Pneumatic additional clamping device for stabilizing thin saw teeth, thereby increasing dimensional accuracy • Powerful coolant system with full enclosure • With a special program (option), variable tooth widths, tooth pitches, and tooth heights can be ground * Feed from the left Technical data: • Tooth pitch: 15 - 100 mm • Flank clearance angle: 0° - 7° • Blade width: 75 - 360 mm • Blade length: from 5.3 m • Cup grinding wheel diameter: 75 or 100 mm • Bore diameter: 20 mm Blade height measuring device for band saws and ripsaws Safety package for cleaning system with flow monitor and pneumatic valve Machine-side connection to cleaning system for ISELI machines bc130, bc240, bc325, em300 Yellow signal lamp Grinding programs / software licenses Program for variable tooth pitches. The tooth pitch is entered on the machine's touchscreen Setup of band saws 1 set of lateral and rear blade supports, setup for narrow band saws with eccentric clamping from 25mm, vernier adjustment for the flank angle adjustments on the tooth back and tooth face, pneumatic additional clamping device for cup grinding wheels with diameters of 75 mm + 100 mm Flank grinding with radius, flank measuring device for protrusion and cutting gap.

Condition: used, all stainless steel mobile adjustable speed Ijdpjzzacrefx Am Djih belt width 600 mm dimensions (l x w x h) : ± 3.000 x 1.700 x 2.100 mm

Condition: used, all stainless steel nett width 450 mm motor Type MS 6-25 HZ Iijdpszzaydefx Am Dsh power: 0,7 kW Grill opening: dia. 10 mm dimensions : ± 2.900 x 750 x 600 mm 380-440V, 50 Hz GN 205,5 kg

Condition: used, all stainless steel nett width 450 mm length: 1.800 mm infeed height: 1.350 mm 400V, 50 Hz, 16A Grill opening: 2 mm Iiodpfx Aoz Az A Dsm Dsh dimensions (L x W x H) : ± 1.900 x 1.100 x 1.450 mm

Condition: new, new ! all stainless steel safety lid 2 mixing directions (manual or automatic) tiltable Iodpfozwu D Ajx Am Doih CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc.

Condition: new, NEW ! PLC control with 50 programs loading : max. 160L with vacuum pump “Busch” 21m³ 2,3 kW Iedpfx Amezwu Hqs Djih weight 380 kg dimensions (l x w x h) : ± 1.320 x 1.380 x 1.540 mm adjustable speed from 2 up to 9 rpm a wide variety of products like: all kinds of salads, meat and fish, can be mixed / tumbled with the Bartumb.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, spindle speed (max.): 3,150 rpm, table width: 630 mm, table load: 3,000 kg, table length: 1,700 mm, mount diameter: 50 mm, total height: 2,300 mm, total width: 2,300 mm, total length: 4,700 mm, rotational speed (max.): 3,150 rpm, overall weight: 6,000 kg, 2013 Overhauled by REIDEN SWISS New regrinded New iTNC530 New Hr410 Handwheel New CE-Safety  New Milling head gears and bearing New LS186C Glas scales New Blum TC60 3D taster Geomtrical DIN 8615 ! Overhauling cost CHF 250k X-Axis: 1300mm Y-Axis: 630mm Z-Axis: 630mm Table Length: 1700mm Table Width: 630mm Table load: 3000 Isdpfx Aezvfiaem Dsih Power on spindle:16kW Spindle speeds: 3150Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Length: 4700mm Width: 2300mm Height: 2300mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Isdpfxsxak D Rs Am Deih Fig. Shows a similar crane system

Condition: excellent (used), axle configuration: 3 axles, first registration: 09/2013, suspension: air, tire size: 385/65/22.5, Year of construction: 2013, Axle configuration Tire size: 385/65/22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; tire tread depth left: 70%; tire tread depth right: 70% Rear axle 2: Tire tread depth left: 70%; tire tread depth right: 70% Rear axle 3: Tire tread depth left: 70%; tire tread depth right: 70% Iiodpfx Aez Erb Esm Doh Weights Unladen weight: 10,040 kg Payload: 29,060 kg GVWR: 39,100 kg Condition Technical condition: very good Optical condition: very good Additional information Please contact Maarten Busser or Niels Busser for further information.

Condition: used, functionality: fully functional, Year of construction: 2014, total length: 1,150 mm, load capacity: 2,500 kg, construction width: 1,200 mm, Double pallet fork Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: very good Description: Good, ready-to-use condition, as returned by the previous owner. Iiedez Idr Uspfx Am Dsh

Condition: used, mileage: 290,432 km, power: 118 kW (160.44 HP), first registration: 10/2010, fuel type: diesel, empty load weight: 2,800 kg, maximum load weight: 700 kg, overall weight: 3,500 kg, fuel: diesel, gearing type: mechanical, emission class: euro5, total length: 7,150 mm, total width: 2,300 mm, total height: 3,320 mm, number of cylinders: 6, displacement volume: 2,143 cm³, nominal power: 118 kW (160.44 HP), Equipment: central locking, cruise control, electric window regulation, power mirror, tail-lift, Key features Internal reference: 26182M Chassis number: WDB 906 135 1N4 583 42 Serial number: 673.730.280 Vehicle model: 316 CDI box van / high-roof / Swiss vehicle Vehicle make: Mercedes-Benz Product category: Van Used / New / Demo: Used Mileage: 290432 Emission standard: Euro 5 Date of first registration: 18.10.2010 Last inspection (MFK or TÜV): 26.04.2023 Fuel: Diesel Engine displacement in cc: 2143 Engine power: 160 Transmission type: Manual transmission Cylinders: 6 Cab Ijdpfxoz Hpqao Am Djih Vehicle equipment: CD player, power windows, power mirrors, radio, cruise control, central locking Number of seats: 3 Air conditioning: Air conditioning Axles & Tires Axle 1: 235 / 65 R16C/8mm, disc brakes, leaf suspension Axle 2: 235 / 65 R16C/8mm, disc brakes, leaf suspension Number of axles: 2 Weights & Dimensions Gross vehicle weight: 3500 Payload: 700 Unladen weight: 2800 Vehicle height: 3320 Vehicle length: 7150 Vehicle width: 2300 Body Body manufacturer: HÄNNI Body model: Box van + high-roof Body manufacturing year: 2010 Lift platform Lift platform brand: TRÖSCH Lift platform deck length: 1800 Lift platform payload: 1000 Lift platform year: 2010

Condition: used, first registration: 06/2007, total width: 2,550 mm, Key features Internal reference: 26055M Chassis number: 936984 Vehicle model: Concrete mixer Liebherr 12m³ / Swiss-Vehicle Vehicle make: Liebherr Product category: Concrete mixer Condition: Used Date of first registration: 06/15/2007 Weights & Dimensions Vehicle width: 2550 Superstructure Superstructure manufacturer: Liebherr Iodpfxez Hp D He Am Djih Superstructure model: Concrete mixer Superstructure internal dimensions l x w x h: 12m³ Superstructure year of manufacture: 2007

Condition: used, Year of construction: 1933, x-travel 1600 mm y-travel 1259 mm z-travel 1500 mm tool adaptor SK 50 weight 10,5 t output 49 kw feed 6000 m/min control Heidenhein 151 1600 min table: 1250-1400 mm serial number 1933 weight of the machine ca. 10,5 t Ijdpfx Asz Aun Som Deih

Condition: used, Year of construction: 2016, turning speeds 0 - 8.000 U/min hollow 20 mm control FANUC - 31i B Turning Automatic Lathe - swiss lathe | ML20C5 - 2016 equipped with bar feeder and chip conveyor. Iijdsz Dbynopfx Am Deh The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ML20C5 | ML-20C5 | ML-20 C5 | ML 20 C5

Condition: used, 180° stainless steel wire belt belt width ± 1.000 mm left hand turn all stainless steel mobile 0,18 kW dimensions : ± 3.750 x 2.100 x 1.300 mm Iiedpfxozzk U Es Am Doh

Condition: used, all stainless steel speed up to ± 50 strokes / min. (Depending on the product, shape, temperature and machine settings) Iedpfxszzlide Am Dsih mobile with outfeed conveyor belt width 600 mm surface of the dies 570 x 130 mm suitable for dies with a thickness of min. 6 mm and max. 40 mm power 22,8 kW weight 1.750 kg dimensions (l x w x h) : ± 2.500 x1.300 x 2.200 mm 3x400v 50 Hz mobile new PLC control (Siemens) HMI Control Touch (digital readout with possibility of storing recipes)

Year of construction: 2022, condition: used, functionality: fully functional, This is a hood-type dishwasher from the manufacturer Meiko, model Upster H500 M2, manufactured in 2022, including feed/discharge tables, spray arm, and mobile water softener. The machine has undergone a major inspection in our in-house workshop and is therefore fully functional and free of defects. It comes with a 6-month warranty on all electrical components. The hood-type dishwasher has only 5388 operating hours and 9648 wash cycles and was used in a small company canteen that has since closed. You will receive an invoice with VAT shown. Iedpszzlntjfx Am Doih Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional. Flexible shipping or self-collection options. Competent advice – before and after the purchase. Provision of operating manuals, connection diagrams and spare parts. Inspection according to DGUV V3. Technical data: W x D x H: 635(687) x 750(850) x 1470 mm, feed/discharge table dimensions: 1200 x 700 mm Basket size: 500 x 500 mm Passage height: 440 mm Program run time: 90 / 150 / 210 s Basket capacity: 40 / 24 / 17 baskets/h (theoretical) Tank capacity: 22.0 L Rinse water quantity: 2.6 L/wash cycle Total connection value: 10.6 kW Fuse rating: 20A On-site boiler heating: 7.50 kW / 10.82 A Tank heating: 2.00 kW / 8.70 A Wash pump: 0.75 kW / 4.60 A Degree of protection of the machine: IP X4 Condition: Used, inspected and fully functional. Your advantages: Simplest operation thanks to clear and easy-to-understand symbols Digital temperature displays for wash and rinse water 3 program run times Eco-filter system for best cleaning results through warmer and filtered tank water Machine and hood double-walled – ideal heat and noise insulation Hood open at the rear – prevents steam from bothering the operator Temperature-dependent extension of wash time – hygiene safety under all operating conditions Wash and rinse systems made of stainless steel Hood start automatic Including lye pump, pressure booster pump, as well as rinse aid and detergent dosing devices, basket equipment Optional: with built-in water softener EW 10 Standard equipment: Liquid detergent dosing device with suction lance for on-site storage containers Rinse aid dosing device with suction lance for on-site storage containers Connection set Lye filter system AktivPlus Pressure booster pump Basket basic equipment: 1 universal basket VKV 50/1 Additional equipment: Original Meiko feed/discharge tables Including spray arm Including mobile water softener Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors Do you have any questions, would you like to request advice or would you like to see something on site? You can reach us during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively according to our general terms and conditions (GTC).

Condition: used, mesh wire belt left hand turn Iodpfxszzlrfe Am Deih all stainless steel belt width 900 mm adjustable speed

Condition: used, Type ID 900 Especially suitable for pasta twin shaft with paddles all stainless steel 2 motor: 2 x 4kW Iodpfx Aozzlr Esm Doih safety lid dimensions (l x w x h) : ± 2.550 x 1.000 x 1.300 mm

Condition: like new (used), The Rotonivo Type RN 4001 rotary paddle level switch, in the cable version, is used for monitoring the level of bulk materials. The device is suitable for use in industrial silo and tank systems and enables reliable level detection. Technical data: Iiedpfszzmr Tjx Am Doh - On request

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details spindle diameter 125 mm Iedezx Rxljpfx Am Djih x-travel 3000 mm y-travel 2000 mm z-travel 1500 mm W-axis (spindle longitudinal) 600 mm table-size 1250 x 1600 mm table load capacity - central/maximum 5000 kg Control Heidenhain iTNC 530 tool taper ISO 50 spindle turning speed range 5 - 3000 U/min spindle drive motor 37 kW max. torque on the spindle 1646 Nm transmission ratio 2 weight of the machine ca. 23 t dimensions of the machine ca. 6830 x 6615 x 7200 mm Additional information Working hours: - Machine on: 59.078 h - Autom. cycle: 24.207 h * CNC-control HEIDENHAIN iTNC 530 * Coolant equipment * Table B-axis, 360.000 positions