Used Temperature Control Machine for sale (88,673)

Condition: good (used), Simatic Panel, Operator Panel, Machine Control Panel, Interface Panel, Control Unit -Manufacturer: SIEMENS -Type: Sinumerik 6FC3478-3EF Ncjdpfx Abodpmm Hsvep -Dimensions: 420/145/H60 mm -Weight: 0.8 kg

Condition: used, Year of construction: 1992, Temperature controller, temperature control device, temperature control device, modular temperature control device, tool heater Ncsdsudqb Aspfx Abvop -Manufacturer: PSG, temperature control device for tool heating up to 8 control zones -Type: RSD II 8 -P max: 28 kW -Transport dimensions: 490/430/H460 mm -Weight: 30 kg

Condition: used, Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature limiter, electronic temperature controller -Manufacturer: Jumo, temperature controller 0 to 250 °C -Type: unfortunately without type designation .: 624603-10114-JR10A Nodpfsm Ui Ihsx Abvecp -Dimension: 130/100/H95 mm -Weight: 0.5 kg

Condition: good (used), Year of construction: 1999, Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit -Type: teco 1000 Nodsqmt Acjpfx Abvocp -Heating output: 15 kW -Nominal cooling capacity: 100 kW Technical data: see photo of the nameplate -Dimensions: 1190/320/H750 mm -Weight: 99 kg

Condition: good (used), Sewing machine, industrial sewing machine, industrial sewing machine, motor control for industrial sewing machine, motor control box, motor controller Njdoxnwx Ropfx Abvecp -Manufacturer: Vetron, Motor Control Box for industrial sewing machine -Type: YSC-8340 -Voltage: 230V -Number: 13x control available -Price: per piece -Dimensions: 280/130/H310 mm -Weight: 4.4 kg/piece

Condition: good (used), Year of construction: 1998, Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit teco wi -Type: teco 1000 -Heating output: 18 kW Nsdpfx Abjiyzn Ijvocp -Nominal cooling capacity: 100 kW -Technical data: see photo of the type plate -Dimensions: 1190/320/H745 mm -Weight: 102 kg

Condition: good (used), Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Manufacturer: Fronius, remote control RCU5000i .: 4,046,098 -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg Ncedpfegrlppjx Abvep

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Manufacturer: Hengstler, temperature controller -Type: grado 906 -Article No.: 0906 Z2210 S -Quantity: 5 pieces controller available -Price per piece -Dimensions: 120/50/H50 mm -Weight: 0.2 kg/piece Ncsdpfjtuybuex Abvep

Condition: good (used), circular vibrating screening plant, screening machine, vibrating screen, vibrating screen, vibration motor, shaker, sorting system, shaking system, sifter, control screening machine, analysis screening machine -Manufacturer: Siebtechnik, control sieving machine Elekto-Schnellsieb with 15 sieve inserts Ncodovgwycspfx Abvop -Type: Perflux for the production of grinding wheels -Sieve inserts: size 42 my to 250 my, see photo parts list -Screening machine: Dimensions 1530/1000/H2130 mm -Transport dimensions: 1600/1300/H2130 mm -Weight: 414 kg

Condition: good (used), Temperature controller, tempering device, temperature control device, modular tempering device, tool heating, hot runner control device Nsdpfxjvn Iqhs Abvocp -Manufacturer: Ewikon, temperature control unit hot runner control unit -Type: 66010.100D -Power: V:625 VA / 230V: 3 kVA -Transport dimensions: 450/350/H230 mm -Weight: 15 kg

Condition: used, Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Remote control -Manufacturer: unknown -Type: Poti -Number: 1x controls available Ncedpfx Ajb Uhulobvsp -Price: per piece -Dimensions: 155/105/H130 mm -Weight: 2.7 kg

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Njdpexpqy Dsfx Abvocp Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Year of construction: 1996, condition: used, Manufacturer: Vulcanic Model: Vulcatherm Catalogue number: 829721-01 Type: Temperature controller Ncedpsx R A A Nofx Abvep Date: 1996   Weight: 210 kg Max. pressure: 10 bar G Max. temperature: 90 °C Thermal fluid: water  

Year of construction: 2007, condition: used, Manufacturer: Solev (Clauger) Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20°C / +230°C Intensity: 51 A. Heating: 25 kW immersion heater Heating control by thyristors. Cooling: No cooling system. Heat transfer fluid: Therminol 66 Regulator type 2704 single loop from EUROTHERM Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Ncodpjx R Aq Tsfx Abvjp Filling volume : 69 L - 246 L Documentation available Sold with protective cover.

Year of construction: 2025, condition: ready for operation (used), An unused Technotrans temperature control unit is available. Connected load range: 8kW-9.5kW, heating capacity range: 7.5kW-9kW, cooling capacity: 23kW, circulating medium: water, max. operating temperature: 95°C, max. operating overpressure: 0bar, filling volume: 10l. Documentation available. On-site inspection is possible. Ncsdpfx Abox Tuncsvep

Condition: good (used), Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: KROt-96/a,re11 -Setting value: from 0 to 1200 °C Ncodpfx Ajb A Sv Tobvsp -220 V 5 A Price: per piece -Quantity: 2 available -Weight: 0.6 kg

Year of construction: 2000, condition: good (used), Number: 0107058 Ncedpfx Aehri Ahebvjp Cooling capacity: 1,100 W at +6° C Cooling capacity: 1.270 kcal/h at +6° C Max. temperature: 44 °C Pressure: 25 bar Dimensions: 750 x 460 x 450 mm Weight: 80 kg

Condition: good (used), Year of construction: 2011, Temperature control unit, heating system, hot water boiler, hydronic system, hydraulic station for high-pressure cleaner, high-pressure pump Ncodjqw D Dpopfx Abvjp -Temperature control units for: water -Electric heating for: pressure washers, high-pressure pumps -Manufacturer: Frigotrol -Type: S-TT 50/108-D -Power: 110 kW -Connection: -Permissible operating overpressure: 6 bar -Dimensions: 1548/890/H1630 mm -Weight: 380 kg

Condition: excellent (used), Autotherm Here we offer you a 6-circuit temperature control device. Without active refrigerating machine! According to the enclosed technical brief description: Temperature range: -40°C ... +85°C (extended temperature range -40°C...+130°C) increased heating power 27 kW instead of 18 kW with 1x temperature control included in the main line with 6x temperature measurement in the respective flow included with 6x temperature measurement in the respective return included with 6x volume flow and pressure measurement in the respective flow included with 6x volume flow and pressure control included 1l/min ... 12 l/min and 0.1 bar ... 3 bar incl. release control incl. FU-controlled pump in the main line incl. 6x 3-way valve with 6x additional overflow valve 2 ... 12 bar adjustable included preset to 2,4 bar with filling and draining device included for all circuits together/simultaneously incl. 50l integrated tank incl. pneumatic emptying function with control S7 incl. included Energy saving and cooling capacity extension: An additional glycol circuit integrated in the temperature control circuit takes over the cooling of the consumer in a temperature range from +85°C to +30°C. The absorbed energy is transferred to the on-site < 20°C cold water network. The cooling capacity at a flow temperature of +20°C: 50 kW. This increases the cooling rate in this temperature range and saves energy due to the lower running time of the refrigerant compressor. (Footprint of the basic unit according to data sheet increases by approx. 0.3 m²) Assembly in Rittal bayed control cabinet: 2x TS8 800x1000x2000 mm Ncjdpfx Aokn Niljbvsp 1x additional, closed switch box min. 600x600x2000 mm (for control/electrics) Supplied via on-site or optional cooling medium supply Flow temperature, on-site cooling brine -43°C, cooling brine requirement 7.5 m³/h continuously controlled For cooling capacity a cooling medium must be connected! Weight approx. 1200 kg Type: Autotherm temperature control unit AWF 130-27/VK/6K Sale ex location! Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer 1800 a Labinot tempering system TS. Labinot tempering system TS 1800 Nedped Huqhjfx Abvscp 400V of 3n,50hz, 3 x 35 AT Weight: approx. 920kg Type: TS 1800 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Condition: good (used), Autotherm Type: Temperature control unit Autotherm AW 95-12/VK/E Temperature control unit Autotherm AW95-12_VK for water / glycol temperature control (refurbished) Autotherm AW temperature control unit: For high-precision temperature control of water Temperature control units from autotherm are used in various areas of industry, research and laboratory applications. Temperature control units supply, for example, tools, open baths, double-walled containers, heat exchangers and heating chambers with tempered water, to keep them at the desired temperature with high precision. Areas of application: Mechanical engineering, e.g. solar and wind power industry, textile industry Plastics processing Chemicals and pharmaceuticals paper production Ncjdpjuigrzjfx Abvjp medical technology Food industry Research and development Temperature control unit Autotherm AKW AW95-12/VK Temperature range RT°C / +95°C Heating capacity 12.0 KW Cooling capacity 18.0 KW Passive cooling system via heat exchanger / connection to cooling water network required Nominal output 14.5 KW Dimensions 600mm x 840 mm x 910mm Power consumption: 400Volt/ 50 Hz 13400 Watt 19,6 A 5,1 bar Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Wittmann Temperature Control Unit Here we offer you a Wittmann temperature control unit. Wittmann Temperature Control Unit DISCO 2 Singulus 3X415V 50/60Hz 16A 5kW Type: TR7B7D7D0X_09_00 Condition: used / used Scope of delivery: (See picture) (Changes and errors in technical data, specifications are reserved!) Njdpjlkbapofx Abvjcp Further questions we can answer on the phone for you.

Condition: new, Year of construction: 2025, Table milling machine minimax twf 55 es M 3 UP Professional workman's machine with motorized height and inclination adjustment of the milling spindle, four speeds and electronic control system Item number 5502266 Brand Holzkraft / SCM EQUIPMENT Equipment Aluminum sliding carriage ✔ Handle at sliding carriage ✔ FLEX ONE routing fence: heavy-duty professional design, automatic adjustment of the entire routing fence depending on the tool diameter, manual adjustment of chip removal, swing-away device, aluminum fence jaws with connecting strips Height adjustment of the spindle motorized. Telescopic miter fence with two folding stops Inclination adjustment of the spindle motorized Cantilever table ✔ Ready 3 control: Programmed movement of the milling unit in two axes, Automatic adjustment of the entire milling stop depending on the tool diameter, Stepless adjustment via switch or automatic positioning system Curved milling protective hood ✔ Position of control elements Control panel at eye level, swiveling Eccentric clamp Ncsdpfx Ajhp Rc Iebvjp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg width/depth (product) approx. 2000mm Connection suction suction connection diameter 2 x 120mm Work table Working table length 1200mm Sliding carriage length 1200mm Working table width 530mm Sliding carriage width 360mm Table height 900mm Slide height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width [...]

Condition: new, Year of construction: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traversing speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth 0–35 mm (with drill length TL 70 mm), automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER to flush glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Indicator lamp for residual glue level in glue container - 1 pc. left side stop, 1 pc. right side stop (all removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT controller with: Integrated industrial PC, incl. Beckhoff TwinCAT soft PLC, operating temperature range 0–50°C, 15" capacitive touchscreen TFT industrial display, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 2 working fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, plain text error diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, art. no. 0470-0810 - 1 EASY CLEAN system, for automatic test glue shots before starting the drilling/gluing/dowel insertion program. E.C.S. for 1 pc. glue nozzle, art. no. 0471-Z010 - 1 single-spindle vertical drilling unit from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjusted via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) Art. No. 0471-0830 - 4 vertical angled clamping cylinders 10° with mount, additional, Art. no. 0470-0850 Ncedpfow Sgm Hox Abvjp Available: short notice

Condition: good (used), Process controller, controller, temperature controller, temperature sensor, temperature setting Nsdob A Itmjpfx Abvecp -Type: Sigmagyr RVP210.1 -Weight: 0.8 kg