Used Temperature Control Machine for sale (88,462)

Condition: used, Year of construction: 2015, functionality: fully functional, The three temperature control units from BoeTherm are for sale. They have all been tested in my workshop and are fully functional. The price is per unit!!! 1. BT-90-9-D2 from 2011, €1,255 2. BT-95-09-D2-M3-V5 from 2015, €1,255 3. BT-95-09-D2-M3-V5-VA-MS from 2015, €2,250 Hfedpfxexpt Rrs Apnsg Medium: Water Heating capacity: 9 kW Pump capacity: 84 L/min Pump pressure: 2.8 bar Tank volume: 6 liters Dimensions: L: 650 mm, W: 265 mm, H: 650 mm, Weight: 45 kg

Condition: like new (used), Year of construction: 2019, operating hours: 3,825 h, functionality: fully functional, The Wittmann plus D140 temperature control unit is for sale. The device was used in a technical center, which explains the low operating hours. Original price: €5,260 - Max. water temperature: 140°C in the mold supply line - Max. system pressure: 10 bar in the mold return line - Pump: 0.5 kW (1.4A) / 50Hz, max. 40 l/min, max. 4.5 bar, seal-less and magnetically coupled - Heating capacity: 7.5 - 9 kW (11.5 - 12.5A) at 380 - 415V - Cooling capacity: 20 kW at ΔT = 75°C (indirect cooling) - Operating voltage: 3x 380 – 415 V, 50 Hz Hjdpfsy Atnyox Apnjfg - Control voltage: 24V AC - Power consumption: 14.5A / 9.5kW (the total connected load increases if options such as reinforced pump or additional heating capacity are added) - Main connection: 4m cable incl. 16A CEKON plug - WITTMANN 4.0 interface including license, with shielded RJ45 socket - USB port: socket for software updates and data logging - Mold supply and return: G3/4'' female thread - Mold circuit with angle-seat strainer, mesh size 0.25mm - Water inlet and outlet: G3/8'' female thread - Strainer in water inlet: G3/8'' female thread, mesh size 0.3mm - Color: RAL7047 (Telegrey 4), front RAL3004 (Purple red) - Weight: Net: 65 kg, Gross: 82 kg (incl. pallet and packaging) - Dimensions (L x W x H): 840 x 265 x 650 mm - Dimensions incl. pallet & packaging (L x W x H): 920 x 630 x 830 mm - Fill volume: 3 liters - Noise level: 70 dB(A) Media: - Process and cooling medium: water

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller Hjdpfx Astuyccspnofg -Manufacturer:Brain Child, DigitalTemperatureController -Type: BTC-9090 -Quantity: 1 controllers available -Price per piece -Dimensions: 95/50/H50 mm -Weight: 0.1 kg/piece

Year of construction: 2015, condition: reconditioned (used), New price 2015- 15200€ GWK cooling tower Proven completely overhauled by GWK Hfsdpfx Apedxlntjnog DGUV certificate available

Condition: used, Used Fryma stand agitator with tempering unit Item number: 10897 Hfodpfjyzp Hvex Apnog Type: stationary Overall height: 1930 mm Overall width: 1320 mm Overall length: 1650 mm Leg height: 100 mm Motor: Power: 11-15 kW Speed: 2910 - 3490 rpm Voltage: 50 - 60 Hz Agitator: Dissolver Diameter: 100 mm Shaft length: 260 mm Tank: Volume: 46 L Material (media-contact): 1.4301 stainless steel Inner diameter: 400 mm Outer diameter: 450 mm Cylindrical height: 365 mm Outlet diameter: 22 mm Distance outlet to floor: 450 mm Tempering unit Make: Tool-Temp Overall height: 920 mm Overall length: 720 mm Overall width: 300 mm

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: AC, Temperer Thermo Quick Duo Hfodpfxsygda Hj Apnog Tempering machine for couverture Model: Thermo-Quick Duo with 2 removable bowls Thermostat-controlled (70°C) Connection: 230 V Dimensions: 760 x 410 x 240 mm (W x D x H) Used machine We have many more machines in stock!

Condition: excellent (used), Thermo Scientific Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Single STW150 Temperature Control System 85°C Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system Description – Function & Application For sale is a professional temperature control and drying system comprising: - Thermo Scientific / Heraeus Forced-Air Drying Oven UT 6200 F - Single Water Temperature Control Unit STW 150/1-3-10-K5 The forced-air drying oven ensures uniform temperature distribution inside the chamber and is ideal for drying, heating, and temperature-controlling samples, components, or materials. Heating is provided via the external water temperature control unit (external heater), resulting in highly stable, indirect, and gentle temperature management—without local overheating and with homogeneous heat distribution. Typical areas of use: - Laboratory & research - Industry & production - Materials testing / component drying - Tempering, heating, drying at constant temperatures Hedpfx Ajymn Egopnefg Robust laboratory and industrial quality—reliable and durable. Device 1 – Forced-Air Drying Oven: Manufacturer: Thermo Scientific / Heraeus Model: UT 6200 F Technical Data: - Max. temperature: 85°C - Operating voltage: 230 V - Frequency: 50 / 60 Hz - Power consumption: 0.6 A - Power: 0.14 kW - Protection class: IP20 Dimensions & Weight (approx.): - External dimensions: 895 × 816 × 715 mm - Inner chamber: 554 × 644 × 503 mm - Volume: approx. 180 liters - Weight: approx. 100 kg Device 2 – Water Temperature Control Unit: Manufacturer: Single Temperiertechnik GmbH Model: STW 150/1-3-10-K5 Technical Data: - Heat transfer medium: water - Connection: 400 V / 3~ / PE / 50 Hz - Power consumption: 6.9 A - Heating capacity: 9 kW - Apparent power: 4.7 kVA - Max. temperature: 150°C Dimensions & Weight (approx.): - Dimensions: 30 × 75 × 60 cm - Weight: 55 kg Total: - Complete temperature control and drying system - Joint operation possible (external heating / external heater) - Total weight: approx. 155 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, year of last overhaul: 2026, total height: 220 mm, total length: 825 mm, total width: 575 mm, type of input current: AC, control voltage: 220 V, Jufeba Tempering Device Tabletop model: TG 2-2 T Stainless steel construction Dry heating Simple temperature control Top-quality engineering Connection: 230V, ready to plug in Dimensions: 575 x 825 x 220 mm (W x D x H) Hfodpfxot U Uxus Apneg Used unit, cleaned & SAB-inspected Many more tempering units in stock!

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller, PID controller -Manufacturer: Eliwell, Digital Temperature Controller PID Controller -Type: EWTR 940/h -Quantity: 1 controller available -Dimensions: 120/70/H70 mm Hfodew A Iuujpfx Apnog -Weight: 0.4 kg

Condition: used, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - defective - without control system Machine not operational - electrically non-functional - without CNC controller Serial No.: Year of manufacture: 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Distance between centers 700 mm Center height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Hodpfx Aod Rmcmjpnofg Grinding spindle drive 3 kW Power supply 380 Volt, 50 Hz, 25 Amp. - CNC control system removed Required space L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control is missing. Mechanically in good condition, ideal for control retrofit Suitable as a spare parts donor or for rebuild with new control system

Condition: excellent (used), Thermo Scientific Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Single STW150 Temperature Control System 85°C Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system Description – Function & Application For sale is a professional temperature control and drying system comprising: - Thermo Scientific / Heraeus Forced-Air Drying Oven UT 6200 F - Single Water Temperature Control Unit STW 150/1-3-10-K5 The forced-air drying oven ensures uniform temperature distribution inside the chamber and is ideal for drying, heating, and temperature-controlling samples, components, or materials. Heating is provided via the external water temperature control unit (external heater), resulting in highly stable, indirect, and gentle temperature management—without local overheating and with homogeneous heat distribution. Typical areas of use: - Laboratory & research - Industry & production - Materials testing / component drying - Tempering, heating, drying at constant temperatures Robust laboratory and industrial quality—reliable and durable. Device 1 – Forced-Air Drying Oven: Manufacturer: Thermo Scientific / Heraeus Model: UT 6200 F Technical Data: - Max. temperature: 85°C - Operating voltage: 230 V - Frequency: 50 / 60 Hz - Power consumption: 0.6 A - Power: 0.14 kW - Protection class: IP20 Dimensions & Weight (approx.): - External dimensions: 895 × 816 × 715 mm - Inner chamber: 554 × 644 × 503 mm - Volume: approx. 180 liters - Weight: approx. 100 kg Device 2 – Water Temperature Control Unit: Manufacturer: Single Temperiertechnik GmbH Model: STW 150/1-3-10-K5 Technical Data: - Heat transfer medium: water Hsdjykab Iepfx Apnjfg - Connection: 400 V / 3~ / PE / 50 Hz - Power consumption: 6.9 A - Heating capacity: 9 kW - Apparent power: 4.7 kVA - Max. temperature: 150°C Dimensions & Weight (approx.): - Dimensions: 30 × 75 × 60 cm - Weight: 55 kg Total: - Complete temperature control and drying system - Joint operation possible (external heating / external heater) - Total weight: approx. 155 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) For further questions, we are happy to assist you by phone.

Year of construction: 2012, condition: good (used), Temperature control unit GWK integat it40E-3 Stock no.: 503198 Machine type/ Device type: Temperature control unit Manufacturer: GWK Type: integat it40B-2 Year of manufacture: 2012 Hedpeyknrhsfx Apnsfg The gwk integrat 40 is a modular multi-circuit temperature control system that can be integrated into the overall process for segmented mold temperature control. - The component consists of: - Central module integrat 40 B2-WZ2 (year 2012) - Electrical mold module W1 (year 2012) - Hydraulic mold module W1 (year 2012) - Temperature control module it40 T1 (FY 2012) - Electric mold module W2 (FY 2012) - Hydraulic mold module W2 (FY 2012) - Temperature control module it40 T2 (FY 2012) Connected load: 63 A Max. operating temperature: 95° C Heating capacity: 3 kW / segment Cooling capacity: 27 kW Pump output: 0.5 kW Interface: VARAN Voltage: 400-415V 50Hz Circulation medium: Water/water

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 154701, Type: 90S/6/TP20/2K/RT45 Power: 6.5 kW Maximum operating temperature: 90 °C Medium: Water Hodpfx Apey Agknenofg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 260640, 261157, Type: P140S/6/B501/1K/RT45 Power: 6.9 kW Maximum operating temperature: 140 °C Hodpoy Agi Rofx Apnefg Medium: Water Pressurized temperature control unit

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 247580, 247422, Type: P140/9/SG51/1K/RT45 Power: 9.8 kW Hodpoy Agh Hsfx Apnefg Maximum operating temperature: 140 °C Medium: water Pressurized temperature control unit Two units available Price: 950 EUR per unit

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 310368, Type: P160/9/SG51/1K/RT45 Power: 9.6 kW Maximum operating temperature: 160 °C Medium: Water Hedpsy Aghyofx Apnofg Pressurized temperature control unit

Year of construction: 2005, condition: good (used), Hot Runner Temperature Control Unit PMS Systems K10-8 Hot Runner Controller Manufacturer: PMS Systems Limited Model: K10-8 Hfsdpfsytqvuex Apneg Serial number: 00404-001 Date: 19.10.2005 Supply voltage: 415 V Phases: 3 / star Max current: 63 A per phase Frequency: 50/60 Hz Type: Hot runner temperature controller for injection moulding tools Connections: Multiple connections for heaters and thermocouples Mobility: Mobile industrial housing CE marking: Present Location: Freiburg

Condition: ready for operation (used), Numeriek gestuurd Japanse elektronica werkt betrouwbaar, 720 mm snijbreedte, zeer stabiel en zwaar gebouwd (1400 kg), kogelomloop spindel voor spelingsvrij instellen van het zadel. Manual en extra mes ingegrepen. Prijs “as is” geladen op uw transport, excl. eventuele gecertificeerde verpakkingskosten. Hfjdpew R En Hsfx Apneg

Condition: ready for operation (used), Year of construction: 2021, operating hours: 3,370 h, functionality: fully functional, machine/vehicle number: 40 6003, spindle speed (max.): 12,000 rpm, spindle bore: 20 mm, bar passage: 20 mm, controller model: Fanuc 31i-B, Equipment: chip conveyor, Only 3,370 spindle hours! TECHNICAL DETAILS Spindle motor power: 5,500 W Max. spindle speed: 12,000 rpm Spindle bore: 20 mm Bar capacity: 20 mm MACHINE DETAILS Control: Fanuc 31i-B Number of axes: 9 Spindles: 2 Supply voltage: 400 V Dimensions & Weight Footprint: 2,000 x 1,280 mm Machine height: 1,720 mm Machine weight: 3,600 kg Operating hours Power-on hours: 32,700 h Spindle hours: 3,370 h EQUIPMENT Interfaces: Ethernet / RS232 / USB / PCMCIA Chip conveyor 3-color signal lamp Rotary cannon Workpiece picker Workpiece ejector Coolant tank Bar feeder: Iemca Elite 220 (2010) Fire protection system High-pressure unit 70 bar Muller Hedpfsyzhlqex Apnsfg Oil cooling unit Circuit diagram Maintenance documentation Operating manual

Condition: good (used), Version with key switch Area of application: Lisec machines Width: 425 mm Height: 160 mm Depth: 50 mm Weight: 1078 g Hodpfx Apsyr Inlensfg Condition: Good, second-hand

Year of construction: 2018, condition: like new (used), The temperature control unit from technotrans is for sale and comes with a variety of extras. Warranty: 6 months with an operating time of 22 hours. Medium: Water with indirect cooling (heat exchanger) Heating capacity: 9 kW Hfjdpfxoyucb Es Apnsg Cooling capacity: 42 kW Operating temperature: max 95°C Flow rate: 60 l/min Max pressure: 6 bar RJ45 port for remote access Interface: RS 485, 20mA CL Touchscreen g and much more.

Year of construction: 2019, condition: like new (used), The temperature control unit from technotrans is available for sale; the unit features high-quality equipment.....6 months warranty, .....Operating hours: 24 hours Medium: Water Temperature range: max. 140 °C Heating capacity: 6 kW Cooling capacity: 70 kW, indirect (heat exchanger) Hodpfxeyub S No Apnefg Pump capacity: 86 l/min Pump pressure: max. 5.5 bar Frequency inverter for pump speed control USB connection Touch display

Condition: new, Year of construction: 2026, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Hedpfjfu Ivzsx Apnsfg Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: used, CNC control in operator panel / machine operating terminal CNC path control FANUC Type A14B - 0048 - Year of manufacture: 1990 - Machine control panel - Electronic handwheel - Flexible silicone PC keyboard Dimensions (WxHxD): 600 x 260 x 350 mm Weight: approx. 40 kg From a GILDEMEISTER CNC lathe. From stock, functionality not tested, ideal as a spare part donor. Hfsdpfxslb I D Ts Apneg

Condition: used, Universal Temperature Control Unit WEINREICH Type WTD 4 Temperature control unit with electric heating and connections for external cooling Serial No.: 11932217 Year of manufacture: 1993 Maximum temperature: 140°C Maximum operating overpressure: 6 bar Pump capacity: 30 l/min Tank volume: 4 liters Heating capacity: 4 kW Cooling capacity (heat exchanger): 15 kW Pump motor power: 0.37 kW Circulating water supply + return: G 3/8" Cooling water supply + return: G 3/8" Total power consumption: 4.4 kW Power supply: 380 Volt, 50 Hz, CEE plug - Tempering medium: water - Temperature control with actual and setpoint display STÖRK-TRONIC Type ST 96-35.02K - Water circulation pump: SPECK - An external cooling unit is required for cooling Hedpfx Apsg Rhx Usnjfg (the cooled water is supplied to the temperature control unit) - Mobile on 4 castors Dimensions (L x W x H): 620 x 260 x 670 mm Weight: 55 kg In good condition