Used Temperature Controller for sale (49,665)

Year of construction: 2020, condition: new, ARTES DN150 PN100 Pneumatic Control Ball Valve – ProTACT – SAMSON 3730-3 For sale: Industrial control ball valve manufactured by ARTES Valve & Service, equipped with a ProTACT pneumatic actuator and SAMSON 3730-3 HART positioner. Gsdpfe Ahic Hox Akhjkd Complete assembly, supplied in a wooden transport crate. Valve specifications: * Manufacturer: ARTES Valve & Service * Type: Control Ball Valve 150 W * Nominal diameter: DN150 * Pressure rating: PN100 * Operating pressure: 47 bar(g) * Operating temperature: 385°C * Body material: 1.0460 * Kvs value: 230 m³/h * Opening angle: 90° * Year of manufacture: 2020 * Serial number: 3162026.1 * Tag number: 83-PCV-800 * Flanged connections Pneumatic actuator: * Manufacturer: ProTACT GmbH * Type: PRY.B2.401S.04.2530KΦ100/ * Reference: HPY-B2-401-SRC4+HT * Supply pressure: 4–6 bar * Temperature range: −15°C to +150°C * Spring action: Clockwise (CW) * Serial number: IS-200162-1-1 Positioner: * Manufacturer: SAMSON * Model: 3730-3 * Type: HART-compatible pneumatic positioner * Input signal: 4–20 mA DC * Maximum supply pressure: 7 bar * ATEX marking * Integrated position indication and diagnostics Condition: Excellent visual condition, stored in protective packaging inside a wooden crate. Operating condition has not been independently verified. Location: Rotterdam, The Netherlands Delivery terms: EXW Rotterdam Worldwide shipping can be arranged upon request. Sold as is, where is, without warranty or returns.

Condition: used, Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclic loads and accelerated aging caused by temperature changes can reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving basket Load capacity of the moving basket: 50 kg for VT3 7012 S2 All-round grid in the moving basket secures the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Cooling unit: water-cooled Shock cooling optional (nitrogen cooling) via customer-side nitrogen supply External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Control panel: IP20 Control cabinet: IP 54 Key figures for temperature tests in single-chamber operation Temperature range Warm chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in the steady state Temperature deviation spatially: +_ 2 K Gjdpfx Ajx Exmtokhekd in the steady state in the moving basket Heating rate warm chamber: 11 K/min Cooling rate cold chamber: K/min Heating rate cold chamber: 2 K/min Cooling rate warm chamber: K/min Viewing window: 355 x 355 mm Pipe passage: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, overall weight: 1 kg, total length: 150 mm, total width: 100 mm, total height: 100 mm, input voltage: 24 V, B&R X20SL8101 SafeLOGIC Safety Controller – Ethernet POWERLINK Programmable safety controller from the B&R X20 series with an integrated bus controller, POWERLINK interface, and openSAFETY communication for industrial safety applications. Manufacturer: B&R Industrial Automation Type: X20SL8101 Series: X20 SafeLOGIC Module type: Safety controller / Central unit Integrated bus controller: Yes Safety communication: openSAFETY Maximum number of SafeNODEs: 280 Programming: Automation Studio / SafeDESIGNER Safety level: Up to SIL 3 according to IEC 61508 / IEC 62061 Performance Level: Up to PL e, Category 4 according to ISO 13849-1 Interface: Ethernet POWERLINK POWERLINK function: Controlled Node Connections: 2 x shielded RJ45 ports (integrated hub) Transmission standard: 100BASE-TX Transmission rate: 100 Mbit/s Maximum cable length: 100 m between two nodes Minimum fieldbus cycle time: 200 µs Minimum X2X link cycle time: 200 µs Autonegotiation: Yes Auto-MDI/MDIX: Yes Operating mode: Half-duplex Standalone operation: Yes Gsdpfxe Aia A Uo Akhskd Dynamic Node Allocation (DNA): Supported Supply voltage: 24 V DC (-15 % / +20 %) Maximum input current SL/BC/X2X: 0.9 A Power consumption: 5.3 W Power consumption I/O internal: 0.6 W Power consumption X2X link supply: 1.42 W Output rated power SL/BC/X2X supply: 7 W I/O output rated voltage: 24 V DC Permissible contact load I/O supply: 10 A Maximum number of function block instances: 4096 Memory for flags: 262,144 bytes Stack memory: 32,768 bytes Memory for safe input data: 6144 bytes Memory for safe output data: 2048 bytes Storage medium: Replaceable SafeKEY Potential isolation: Fieldbus to X2X link and I/O Cooling: Fanless Status indicators: CPU, POWERLINK, SafeKEY Protection class: IP20 Operating temperature in horizontal mounting: 0 to +60 °C Operating temperature in vertical mounting: 0 to +45 °C Storage temperature: -40 to +85 °C Relative humidity: 5–95 %, non-condensing Dimensions (W x H x D): 62.5 x 99 x 75 mm Weight: 190 g B&R ID code: 0xE649

Condition: used, Vötsch Temperature testing chamber / Vibration testing chamber Vötsch VTV³ 7120-10 temperature testing chamber Temperature range: -70 °C to +180 °C Designed for combination with vibration / oscillation testing systems For sale is a used temperature testing chamber from the manufacturer Vötsch Industrietechnik / Weiss Technik. Suitable for temperature testing as well as testing in combination with vibration and oscillation testing systems, environmental simulation, material and component testing, as well as development, aging, and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik / Weiss Technik Type: VTV³ 7120-10 Design: Customer-specific unit Simpac Device type: Temperature testing chamber / Vibration testing chamber Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1,150 liters Temperature change rate cooling: approx. 10.5 K/min Temperature change rate heating: approx. 12.0 K/min Test chamber dimensions (W × D × H): approx. 1,100 × 1,100 × 950 mm External dimensions (W × D × H): approx. 1,525 × 3,590 × 2,150 mm Weight: approx. 2,150 kg Refrigerant 1: R452A Quantity: 8.00 kg · GWP: 3,922 · CO₂ equivalent: 31.38 t Max. low pressure: 22.5 bar g · Max. high pressure: 25 bar g Refrigerant 2: R23 Quantity: 5.60 kg · GWP: 14,800 · CO₂ equivalent: 82.88 t Max. low pressure: 22.5 bar g · Max. high pressure: 25 bar g · Static pressure: 17 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 26 kW · Rated current: 49 A Equipment: Programmable touch panel control Temperature control Large stainless steel test chamber Observation window Test specimen ports Preparation for vibration / oscillation testing systems Water-cooled refrigeration unit Multi-stage refrigeration system Connection and supply components as shown in the pictures Application areas: Temperature and vibration testing Environmental simulation Material, electronics, and component testing Assembly and automotive testing Quality assurance Research and development Lifetime, aging, and stress tests Environmental Stress Screening (ESS) Condition: Used Optical condition as shown in the pictures Scope of delivery: 1 × Vötsch VTV³ 7120-10 temperature testing chamber Programmable touch panel Gkodpfx Asz Ixwljkhjd Existing connection and supply components Accessories as shown in the pictures Shipping or freight shipping possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötsch Climate testing chamber / Temperature and humidity testing chamber Vötsch VC³ 7250 Gjdpfx Ae Ai Scyskhokd 2,500-liter test chamber -70 °C to +180 °C / Touch panel control Water-cooled For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. For temperature and humidity tests, environmental simulation, and component testing. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 7250 Test chamber volume: 2,500 liters Weight: approx. 1,450 kg (manufacturer's specification) Temperature range: -70 °C to +180 °C Heating: 2.26 K/min Cooling: 1.35 K/min Time deviation: ±0.3 to ±1 K Homogeneity: ±0.5 to ±2 K Thermal compensation: 5,000 W at +20 °C at -20 °C (manufacturer's data) Internal dimensions (W × D × H): approx. 1,995 × 1,250 × 975 mm External/installation dimensions (W × D × H): approx. 3,750 × 1,450 × 2,260 mm Dimensions according to drawing. Electrical data according to nameplate: Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17 kW Rated current: 30 A Degree of protection, control cabinet/control panel: IP54 Refrigerant according to label: R452A R23: 1.0 kg Max. low pressure: 18 bar(g) Max. high pressure: 25 bar(g) Standby pressure: 12 bar(g) Equipment: Touch panel operation Double-leaf test chamber door with viewing window Test chamber lighting: 2 × 24 V / 50 W Test item passage Ø 80 mm according to drawing Control cabinet and main switch panel Pressure equalization opening Condensate tray Water tank with level indicator Supply and disposal connections Test chamber load according to the manufacturer: Shelf: 30 kg; reinforced: 75 kg Insert shelf: 150 kg Test chamber total: max. 300 kg Special heavy-duty floor: max. 500 kg (optional) Application areas: Temperature and humidity testing Environmental simulation / Material testing Electronics and component testing Quality assurance / Research Condition: Used Optical condition according to pictures. Scope of delivery: 1 × Vötsch VC³ 7250 climate testing chamber Equipment according to pictures. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will gladly answer any questions by telephone.

Condition: used, VÖTSCH Vötsch VT³ 7012 S2 Temperature shock test chamber with two temperature zones 125 liter test chamber volume, water-cooled For sale is a used cold and thermal shock test chamber from Vötsch Industrietechnik GmbH. The system is used for testing components, electronic parts, and materials under rapid temperature changes. Features a digital touchscreen control and stainless steel test chamber. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VT³ 7012 S2 Year of manufacture: 2018 Operating hours: approx. 763 hrs Test chamber volume: approx. 125 liters (model specification) Temperature zones: 2 Cooling: water-cooled Temperature ranges: Warm chamber: 0 to +220 °C Cold chamber: -85 to +75 °C Temperature ranges according to workshop protocol. Electrical data: Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A Refrigerant according to nameplate: R449A: 1.70 kg R23: 1.27 kg Max. low pressure: 22.5 bar(g) Max. high pressure: 25 bar(g) Stand pressure R23: 14 bar(g) Equipment: Two temperature zones for cold and thermal shock testing Stainless steel test chamber Test chamber door with viewing window Interior lighting Digital touchscreen control Temperature displays Water-cooled refrigeration system Cooling water connections for supply and return RS232 interface according to workshop protocol Application areas: Temperature shock testing Thermal cycling Electronics and component testing Material testing Environmental simulation Quality assurance Research and development Gkjdpfxo Aiucqs Akhod Condition: Used Optical condition according to pictures. Scope of supply: 1 × Vötsch VT³ 7012 S2 temperature shock test chamber Existing equipment according to pictures. Important note: For the safety of our customers, the following work will be carried out on the offered test and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, The new, cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with its clear concept. Notable features of the K-MT adsorption dryer series include: Godpfx Akjypb Dushskd • Adsorber profiles manufactured in one piece • Separately controlled main and blow-off valves in a leak-proof design • Compact check valve combination, guaranteeing continuous operational reliability and high availability. All adsorption dryers in the K-MT series feature: • Self-cleaning sieve trays on the wet side • High-quality drying agents During adsorption, the drying agent stores the moisture contained in the compressed air. Parker Zander exclusively uses highly active molecular sieve drying agents with a high capacity. This drying agent guarantees a long service life, even at high inlet temperatures or low pressure dew points. Regeneration takes place in counterflow to the adsorption process. A portion of the dried compressed air is depressurized to atmospheric pressure and passed through the drying agent bed to be regenerated. The moisture stored during adsorption is removed with the partial flow of dry regeneration air. The regeneration air requirement of 14.3% for cold-regenerating adsorption dryers refers to: • Operating pressure of 7 bar • Inlet temperature of 35°C • Pressure dew point of -40°C • in a cycle with • 5 minutes adsorption • 4 minutes desorption • 1 minute pressurization The Parker Zander 10-minute cycle, with 5 minutes of adsorption, includes 12 load changes per hour. The commonly used 6-minute cycle, with 3 minutes of adsorption, requires 20 load changes per hour and, therefore, inevitably 5.6% more regeneration. The Parker Zander 10-minute cycle saves energy costs while reducing wear and tear. Multitronic, the control system • with new, groundbreaking functions and in a new design, is perfectly tailored to the cold-regenerating adsorption dryers of the K-MT series. • It enables the highly effective adaptation of the adsorption dryer, even to extremely diverse operating conditions. • From the permanently visually recognizable status to the pressure dew point control of the adsorption dryer, the benefits for the operator are clearly evident with Multitronic. • The Multitronic system, housed in a clear and easily accessible control cabinet, offers: • A comfortable microprocessor control for all Parker Zander heatless dryer systems • Flexible adjustment of the cycle times is possible. • LEDs on the front for the individual functions, such as • Operation • Adsorption • Desorption • Selector switch I-0-2 for fixed cycles or variable cycles as a synchronous control with the compressor Possible options: • Direct pressure dew point measurement including digital display • A potential-free output for the pressure dew point limit value • The ability to set the desired dew point in the range of -25°C to -40°C. Technical data: K-MT 8 Capacity m³/h: 72 Connection: G ½ Pressure bar: 16 Weight kg: 77 Electrical connection Watt: 50 Year of construction: 2009 Manufacturer's price: €8,880

Condition: used, input voltage: 24 V, type of input current: DC, B&R X20CP3585 PLC Control CPU Module – X20 System High-performance PLC central unit with an Intel Atom processor for industrial automation and control applications. Manufacturer: B&R Industrial Automation Model: X20CP3585 Series: X20 System Device Type: PLC Control / CPU Module Condition: Used Processor: Intel Atom E640T Processor Clock Speed: 1 GHz Working Memory: 256 MB DDR2-SDRAM User RAM: 1 MB SRAM L2 Cache: 512 kB Retentive Variables: Max. 256 kB Program Memory: CompactFlash slot Integrated I/O Processor: Yes Interfaces: 1x RS232, 1x Ethernet, 1x POWERLINK, 2x USB, 1x X2X Link Ethernet: 10/100/1000 Mbps POWERLINK: V1/V2, 100 Mbps USB: 2x USB 1.1/2.0 Type A RS232: Max. 115.2 kbit/s Expansion Slots: 3 for X20 interface modules Gjdpfx Ake Ah T Uaohjkd Shortest Task Class Cycle Time: 200 µs Typical Instruction Cycle Time: 0.0044 µs Controller Redundancy: Supported Supply Voltage: 24 V DC (-15 % / +20 %) Power Consumption: 8.8 W (without interface modules and USB) Cooling: Fanless Operating Temperature: -25 to +60 °C in horizontal mounting position Protection Class: IP20 Dimensions (W x H x D): 200 x 99 x 85 mm Weight: Approx. 470 g

Condition: used, FEUTRON Temperature Test Chamber / Climate Simulation Chamber Feutron 3416/16-Ex / TPK 200 Temperature range: -75 °C to +150 °C Water-cooled cascade refrigeration system For sale is a used temperature test chamber from the manufacturer Feutron Klimasimulation GmbH. The temperature test chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. Technical data: Manufacturer: Feutron Klimasimulation GmbH Type: 3416/16-Ex Series: TPK 200 Device type: Temperature test chamber Test chamber volume: 280 liters Temperature range: -75 °C to +150 °C Temperature deviation over time: ≤ ±0.5 K Temperature change rate: Heating: up to approx. 3.0 K/min on average Cooling: up to approx. 1.0 K/min on average Test chamber material: Stainless steel, material no. 1.4301 Test chamber insulation: CFC-free multi-layer insulation Number of shelves: 3 Lighting: 50 W Refrigeration system: Water-cooled semi-hermetic cascade system Refrigerant 1: R507 Refrigerant quantity: 2.5 kg Gjdpfxsz Hl Dve Akhokd Refrigerant 2: R23 Refrigerant quantity: 0.5 kg Cooling water connection: Cooling water pressure: min. approx. 2.0 bar / max. 6.0 bar Max. cooling water temperature inlet: approx. 18 °C Cooling water temperature outlet: approx. 30 °C Cooling water consumption on average: approx. 0.3 m³/h Power connection: 400 V / 3/N/PE AC / 50 Hz Max. simultaneous power consumption: 5.6 kW Fuse: 3 × 16 A, characteristic C Protection class: IP20 Feedthroughs: 1 × Ø 75 mm with cover cap 2 × Ø 75 mm on the side 1 × Ø 100 mm on the side Dimensions: approx. 1,500 × 1,075 × 2,140 mm (W × D × H) Weight: approx. 680 kg Equipment: Programmable Feutron control system LCD display Program and manual operation Up to 20 programs can be stored RS-232 interface Temperature monitoring 3 stainless steel shelves Test chamber lighting Observation window Several feedthroughs for test specimens Compressed air connection Cooling water supply and return Additional temperature controller Accessories according to images Areas of application: Temperature testing Environmental simulation Material testing Electronics testing Component testing Quality assurance Research and development Lifetime testing Aging and stress tests Condition: Used Device starts Control system and display are active Optical condition according to images Scope of delivery: 1 × Feutron 3416/16-Ex temperature test chamber 3 × stainless steel shelves Fan / accessories according to images Documentation according to images The table shown in the photos and other items not explicitly mentioned are not part of the sale. Shipping or freight transport is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Vötsch Temperature Shock Chamber / Shock Test Chamber Vötsch VT 7012 S2 Temperature Shock Chamber Two-chamber system for rapid temperature changes from -80 °C to +220 °C Water-cooled version with a mobile cart and programmable controller For sale is a used temperature shock chamber from the manufacturer Vötsch Industrietechnik GmbH. The system is suitable for temperature shock and temperature cycling tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. The test chamber operates with a hot and a cold chamber. The test specimen is moved between the two temperature zones using a mobile cart. The system has an observation window, test chamber lighting, and a programmable controller. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7012 S2 Device type: Temperature shock chamber / Shock test chamber Version: Two-chamber system / water-cooled Temperature range, hot chamber: +50 °C to +220 °C Temperature range, cold chamber: -80 °C to +70 °C Temperature deviation (time): ±1.0 K Temperature deviation (spatial): ±2.0 K Heating rate, hot chamber: approx. 11.0 K/min Cooling rate, cold chamber: approx. 3 K/min Heating rate, cold chamber: approx. 2.0 K/min Test chamber volume: approx. 125 liters Test chamber dimensions: 470 × 410 × 650 mm (W × H × D) Max. load capacity, mobile cart: 40 kg Max. total load capacity, mobile cart: 20 kg Pipe connection: Ø 67 mm Refrigerant 1: R404A Refrigerant quantity: 2.5 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 1.1 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Standby pressure: 13 bar g Power supply: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A On-site fuse: 32 A slow-blow Compressor power: 2 × 3 kW Cooling water supply: Inlet pressure: 3 to 6 bar Differential pressure, inlet and outlet: ≥2.5 bar Water connection: R 3/4" internal thread Dimensions: External dimensions: approx. 975 × 2,115 × 1,675 mm (W × D × H) Weight: approx. 1,000 kg Equipment: Two-chamber temperature shock system Hot chamber Cold chamber Motor-driven mobile cart Programmable controller Manual operation Automatic operation Shock test operation Observation window Test chamber lighting Pipe connection Ø 67 mm Water-cooled refrigeration system Signal light Control terminal Accessories as shown in the pictures Application areas: Temperature shock testing Temperature cycling testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition as shown in the pictures Scope of delivery: 1x Vötsch VT 7012 S2 Temperature Shock Chamber Control terminal Original operating manual Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: Godpfoz Ehrgex Akhskd 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table or other items not explicitly mentioned in the photos are not part of the sale. Shipping or forwarding possible. Subject to changes, errors and prior sale. We are happy to answer further questions by phone.

Condition: used, Vötsch Temperature shock test chamber / Shock test chamber Vötsch VT 7012 S2 temperature shock test chamber Two-chamber system for rapid temperature changes from -74 °C to +220 °C Water-cooled version with mobile cart and programmable control   For sale is a used temperature shock test chamber from the manufacturer Vötsch Industrietechnik GmbH.   The system is suitable for temperature shock and temperature cycling tests, environmental simulation, material testing, quality assurance, electronics and component testing as well as development, aging and stress tests.   The test chamber operates with a hot and a cold chamber. The test specimen is moved between the two temperature zones via a mobile cart. Gsdpez Ehuujfx Akhokd The system features an observation window, test chamber lighting and programmable control.   Technical data:   Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7012 S2 Equipment type: Temperature shock test chamber / Shock test chamber Version: Two-chamber system / water-cooled   Temperature range, hot chamber: +50 °C to +220 °C Temperature range, cold chamber: -74 °C to +70 °C Temperature deviation over time: ±1.0 K Temperature deviation spatially: ±2.0 K   Heating rate, hot chamber: approx. 11.0 K/min Cooling rate, cold chamber: approx. 3 K/min Heating rate, cold chamber: approx. 2.0 K/min   Test chamber volume: approx. 125 liters Test chamber dimensions: 470 × 410 × 650 mm (W × H × D) Max. load capacity, mobile cart: 40 kg Max. total load capacity, mobile cart: 20 kg Pipe passage: Ø 67 mm   Refrigerant 1: R404A Refrigerant quantity: 2.5 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g   Refrigerant 2: R23 Refrigerant quantity: 1.1 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Standby pressure: 13 bar g   Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A On-site fuse: 32 A slow-blow Compressor power: 2 × 3 kW   Cooling water supply: Inlet pressure: 3 to 6 bar Differential pressure, inlet and outlet: ≥2.5 bar Water connection: R 3/4" internal thread   Dimensions: External dimensions: approx. 975 × 2,115 × 1,675 mm (W × D × H) Weight: approx. 1,000 kg   Equipment:   Two-chamber temperature shock system Hot chamber Cold chamber Motorized mobile cart Programmable control Manual operation Automatic operation Shock test operation Observation window Test chamber lighting Pipe passage Ø 67 mm Water-cooled refrigeration unit Signal light Operator terminal Accessories according to images   Application areas:   Temperature shock testing Temperature cycling testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Quality assurance Research and development Service life testing Aging and stress tests   Condition:   Used Optical condition according to images   Scope of delivery:   1x Vötsch VT 7012 S2 temperature shock test chamber Operator terminal Original operating manual Accessories according to images   Important note: For the safety of our customers, the following work will be carried out on the offered test and climate systems in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection   The table shown in the photos or any other items not expressly mentioned are not included in the sale.   Shipping or freight forwarding possible. Subject to changes, errors and prior sale.   We wi

Condition: used, ESPEC Temperature Shock Chamber / Liquid-to-Liquid Shock Chamber ESPEC TSB-51 Temperature Shock Chamber Temperature range: Hot bath +70 °C to +200 °C / Cold bath -65 °C to 0 °C Approximately 13,611 operating hours Air-cooled For sale is a used liquid-to-liquid temperature shock chamber from the manufacturer ESPEC CORP. The temperature shock chamber is suitable for thermal shock testing, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. The system operates with a liquid-to-liquid testing process with a movable test basket between the hot and cold baths and features a programmable controller. Technical data: Manufacturer: ESPEC CORP. Type: TSB-51 Equipment type: Liquid-to-liquid temperature shock chamber Operating hours: approx. 13,611 h Temperature range, hot bath: +70 °C to +200 °C Temperature range, cold bath: -65 °C to 0 °C Bath volume: approx. 55 liters Test basket: 150 × 150 × 200 mm (W × H × D) Internal dimensions: 290 × 350 × 520 mm (W × H × D) External dimensions: 1200 × 1785 × 1320 mm (W × H × D) Weight according to nameplate: 800 kg Power connection: AC 400 V / 3-phase / 50 Hz Max. power consumption: 22 A Refrigerant 1: R404A Refrigerant quantity: 2.8 kg Refrigerant 2: R508A Refrigerant quantity: 0.89 kg Equipment: Programmable ESPEC controller with display Liquid-to-liquid temperature shock testing system Movable test basket Hot bath and cold bath Overcooling protection Gedpfx Aksz Hb Tyohokd Overheating protection Operating hour counter RS-485 interface ESPEC OnlineConverter PN5-CN Ethernet and USB interfaces Operating manuals as shown in the pictures Application areas: Temperature shock testing Thermal cycle testing Material testing Electronics testing Component testing Automotive Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition as shown in the pictures Device powers on / Controller and display are active Scope of delivery: 1x ESPEC TSB-51 temperature shock chamber ESPEC OnlineConverter PN5-CN Operating manuals as shown in the pictures Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Vötsch   Temperature Test Chamber / Climatic Chamber   Vötsch VTS 7027-10 Temperature Test Chamber Temperature range from -70 °C to +180 °C Approx. 270 liters / fast temperature changes / water-cooled   For sale is a used temperature test chamber from the manufacturer Vötsch Industrietechnik GmbH.   The temperature test chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests.   The unit features a programmable touch panel control, a large viewing window, a stainless steel test chamber, and side openings for test specimens.   Technical data:   Manufacturer: Vötsch Industrietechnik GmbH Type: VTS 7027-10 Device type: Temperature test chamber Year of manufacture: 2002 Test chamber volume: approx. 270 liters   Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 10 K/min Temperature change rate (cooling): approx. 14.5 K/min Temperature deviation (time): ±0.3 to ±0.8 K Temperature deviation (spatial): ±0.5 to ±2 K   Refrigerant 1: R404A Refrigerant quantity: 8 kg Max. high-side pressure: 25 bar g   Refrigerant 2: R23 Refrigerant quantity: 2.1 kg Max. low-side pressure: 19 bar g Max. high-side pressure: 25 bar g Static pressure: 17 bar g   Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 14 kW Rated current: 26 A   Dimensions and weight:   Test chamber volume: approx. 270 liters Internal dimensions (W × D × H): approx. 580 × 620 × 750 mm External dimensions (W × D × H): approx. 870 × 1,895 × 1,775 mm Weight according to series documentation, without options: approx. 835 kg   Equipment:   Programmable touch panel control S!MCON/32-NET control, monitoring, and regulation system Water-cooled refrigeration unit Interior made of stainless steel Large viewing window Test chamber lighting Side openings for test specimens Stainless steel shelves Adjustable temperature limiter Software temperature limiter RS232 interface   Cooling water inlet and cooling water outlet Programmable test operation Touch panel swiveling / removable   Application areas:   Temperature testing Temperature cycle testing Environmental Stress Screening (ESS) Environmental simulation Material testing Electronics testing Component testing Assembly testing Quality assurance Research and development Lifetime testing Aging and stress tests   Condition:   Used Optical condition according to pictures Gkodpfx Asz A A Ecekhsd   Scope of delivery:   1x Vötsch VTS 7027-10 temperature test chamber Touch panel control Stainless steel inserts according to pictures Accessories according to pictures   Important note: For the safety of our customers, the following work will be carried out on the offered test and climate systems in advance: 1. Functional test and replacement of any necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection   Shipping or freight forwarding possible. Subject to changes, errors and prior sale.   We will be happy to answer any further questions by telephone.

Condition: used, Vötsch Temperature Test Chamber / Climate Test Chamber Vötsch VTS 7027-15 Temperature Test Chamber Temperature range from -70 °C to +180 °C Approx. 270 liters / Heating up to 15 K/min / Cooling down 15 K/min For sale is a used temperature test chamber from Vötsch Industrietechnik GmbH. The test chamber is suitable for rapid temperature cycling tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. The unit features a programmable touch panel control, a large viewing window, a stainless steel test chamber, and side access ports for test specimens. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VTS 7027-15 Device type: Temperature test chamber / Climate test chamber Test chamber volume: approx. 270 liters Temperature range: -72 °C to +180 °C Heating rate: approx. 18 K/min Cooling rate: approx. 18 K/min Temperature deviation (temporal): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±2 K Heat compensation at -20 °C: approx. 8,000 W Heat compensation at +20 °C: approx. 8,000 W Refrigerant 1: R404A Refrigerant quantity: 6.5 kg Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 2.3 kg Max. high pressure: 25 bar g Standby pressure: 17 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 16 kW Rated current: 31 A Cooling: Gkedpfx Akjz A U N Tjhjd Water-cooled version Cooling water inlet and outlet available Dimensions and weight: Test chamber volume: approx. 270 liters Internal dimensions (W × D × H): approx. 580 × 620 × 750 mm External dimensions (W × D × H): approx. 870 × 1,895 × 1,775 mm Weight according to model series documentation: approx. 835 kg Equipment: Programmable touch panel control S!MCON/32-NET control, monitoring, and regulation system Water-cooled refrigeration unit Interior made of stainless steel Large viewing window Test chamber lighting Side access ports for test specimens Stainless steel grid shelves Adjustable temperature limiter Main switch RS232 interface Power socket 220–240 V AC, max. 2 A Programmed operation and manual operation Application areas: Temperature testing Temperature cycling testing Environmental Stress Screening / ESS Material testing Electronics testing Component testing Assembly testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition according to images Scope of delivery: 1x Vötsch VTS 7027-15 Temperature Test Chamber Programmable touch panel Stainless steel inserts according to images Accessories according to images Important note: For the safety of our customers, the following work will be carried out on the offered test and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight shipping possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: ready for operation (used), Fanuc A06B-0127-B177 AC servo motor, serial number: C945C3795, used, in good condition, 100% functional, scope of delivery as shown in the photos. Gjdpfx As Adx E Uokhskd

Condition: ready for operation (used), Yokogawa TM-H6A3PB1NR076 torque motor SN:96H105 + 6RH-D9 gearbox SN:96H120, used, normal signs of wear, 100% functional, delivery as shown in the photos. Gksdpfe Adx Hxsx Akhsd

Condition: good (used), mileage: 49,153 km, power: 125 kW (169.95 HP), first registration: 07/2024, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, total length: 6,230 mm, total width: 2,020 mm, total height: 2,700 mm, loading space length: 3,320 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Rear view camera - Lane keeping assist - Fabric - Blind spot sensor - Partition = Notes = Configuration: 4x2, Payload: 1470 kg, Tare weight: 2030 kg, Gross vehicle weight: 3500 kg, Towing capacity, unbraked: 750 kg, Towing capacity, center axle, braked: 2000 kg, Tow hitch, Type of cabin: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, GPS navigation, Color: White, Heated mirrors, Rear view camera, Lighting type: Halogen lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 125 kW (168 hp), Number of cylinders: 4, Displacement: 1950 cc, Fuel: Diesel, Euro: 6, Drivetrain: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Side wall paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat material: Fabric, Seat adjustment: Manual, L2H2, automatic, air conditioning, navigation, 10' mbux, camera, tow hitch + locks, 49,000 km, Tire type: All-season tires = Further Information = General information Number of doors: 1 License plate: V-01-PHJ Axle configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 3 mm; Tire tread depth right: 3 mm Weights Unladen weight: 2,030 kg Payload: 1,470 kg GVW: 3,500 kg Functional Loading area height: 65 cm Maintenance APK (Technical Inspection): valid until 07.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Gsdpfx Ajzni Udekhskd Leasing price: €585 per month (delivery van, 72 months); Ask for more information and conditions.

Condition: used, CTS Climate testing chamber T-70/600, water-cooled Temperature range: -70°C to +180°C Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z, refrigerant R23/R404A Gjdoziycbopfx Akhekd Control: -Microprocessor-controlled regulation and monitoring system -Simple, user-friendly terminal integrated into the door. -Digital display of setpoint and actual temperature Easy adjustment via +/- buttons -Digital input for temperature in °C -PLC compatible -Up to 100 test programs possible -RS 232 interface -2 free switching channels for on-site test item control Insert rack: Stainless steel, support surface 820 x 710 mm Load per rack max. 35 kg Total load with max. rack capacity 100 kg Refrigeration unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate measured in the center of the test chamber according to DIN 50 011, Part 12 Heating 2.5 K/min Cooling 2 K/min Heat radiation max. 1500 W at +20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current: 10.2 A Protection class IP 22 Condensate drain, unpressurized R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, CTS Type: TS-70/350 Water-cooled Technical specifications: Temperature operating range Temperature range: -70°C / +180°C Rate of temperature change according to DIN 50 011, Part 12 Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Gkjdeziyphspfx Akhod Test volume: 350 liters Test chamber dimensions: height, approx. 750 mm, width, approx. 650 mm, depth, approx. 720 mm External dimensions: height, approx. 1800 mm, width, approx. 850 mm, depth, approx. 1640 mm Operating data: Electrical connection: 400 V, 3/N, 50 Hz Rated power: 13.3 kW Refrigerant: R404A / R23 Weight: approx. 650 kg For your peace of mind as a buyer, please note the following: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with refrigerants that comply with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötsch Type: VC³ 0100 Vötsch Climate Test Chamber, Air-Cooled Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Device dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Test chamber volume: 990 liters Temperature tests: Minimum temperature -0°C Maximum temperature +90°C Temperature change rate (cooling): 0.2 K/min Temperature change rate (heating): 0.5 K/min Temperature deviation (over time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 1.0 K Thermal compensation at +20 °C: 350 W Climate tests: Minimum temperature +10°C Maximum temperature +90°C Dew point temperature range: +4°C to +89.5°C Humidity range: 10 to 98% RH Humidity deviation (over time): ± 1 to ± 3% RH Temperature deviation (over time): ± 0.1 to ± 0.3 K Temperature homogeneity (spatial): ± 0.5 to ± 1.0 K Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.3 kW Rated current: 10 A Refrigerant: R-404A Weight: approx. 1400 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) Gjdpfx Ajziypuskhjkd (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: TS 130 Temperature shock test chamber, water-cooled Specification: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber changeover: 10 sec. Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lift platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz /14.0 kW Gkodpfxezp D Alo Akhed Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Weiss Type: TS 130 Temperature shock test chamber, water-cooled Specification: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Gkjdozp D Dispfx Akhod Hot/cold chamber changeover: 10 sec. Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lift platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz /14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2017, functionality: fully functional, From the dismantling of a production facility belonging to an automotive supplier, professionally disassembled. Available quantity: 16 units Brand: CLECO Series: MPRO400GC Voltage: 230 V AC Frequency: 50/60 Hz Rated current: 2 A Power: Typically 250 VA Protection class: IP42 Gkedo Agp Haspfx Akhed

Condition: used, This listing is for the Broadley James Flow Controller S/601. The unit is in full working condition and ready for immediate use. Gjdpfx Akjyw Iwfjhskd This precision gas flow controller is designed for demanding bioprocessing environments. It features a clear digital interface for accurate monitoring and control of flow rates, ensuring optimal conditions for cell culture and fermentation. Robust and dependable, it integrates seamlessly into existing laboratory workflows

Condition: used, 80 Control Units Electronics / PLC Controls Manufacturer: FESTO Gsdpfx Akjzvhnfjhjkd Type: CPX-CEC-C1 Condition: Good used condition. Fully functional prior to removal. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.