Used Temperature Controller for sale (49,641)

Condition: used, Year of construction: 2009, machine/vehicle number: 090924, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Gkodpey Su Efjfx Akhed

Condition: used, functionality: fully functional, machine/vehicle number: 04217, For sale is a reliable and robust temperature control unit from Regloplas, model 90S. Used condition, with age-appropriate signs of wear on the housing. 3 units available. Technical data Gedpfx Akjy E Hzrehskd Type: 90S / 6 / TS22 / 1K / RT45 Max. temperature: 90 °C Heating capacity / power rating: 7.1 kW Voltage: 400 V / 3 PE (three-phase) Frequency: 50 Hz Current: 11 A Filling volume: 3 l Wiring diagram no.: 04217

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-03, Temperature control unit by gwk, pre-owned and untested. Designed for mold temperature control, injection molding, and industrial process technology applications. Operates as a single-circuit system with the Logotherm control system. The unit uses water* as the heat transfer medium, with a maximum supply temperature of 30 °C*. Heating capacity is not specified; pump capacity is 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Gjdpfx Aksy Su Aqjhjkd

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-04, Temperature control unit by gwk, used and untested. Designed for tool temperature regulation, injection molding, and industrial process engineering. Operates as a single-circuit system with Logotherm control. Uses water* as the medium, with a maximum supply temperature of 30 °C. Heating capacity not specified, pump delivers 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Godey Su Adepfx Akhokd

Condition: used, functionality: fully functional, Several MP 888 controllers from Tool-Temp are available for sale or for exchange. Gsdev E Uirspfx Akhskd

Operating hours: 38,526 h, condition: used, machine/vehicle number: 23-06757-2, Temperature control unit from the manufacturer Tool-Temp, used and untested. The unit is designed for mold temperature control, injection molding, and process engineering applications. It operates in a single-circuit system with the TT-380 controller. The medium used is oil*, with a maximum supply temperature of 360°C*. Heating capacity is 24 kW*, and pump performance is 90 l/min at 5.5 bar*. The unit is fitted with a K21R 90 S 2 motor. Recorded operating hours are 38,526; year of manufacture is unknown. Gedjy Suavspfx Akhokd

Condition: used, machine/vehicle number: 0926292, Year of construction: 2009, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Gksdpfxey Su D Ue Akhod

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG73/D K/RT50 Temperature control unit with electric heating and connections for external cooling Circulating process temperature control for industrial use in plastics processing, especially for temperature control of injection molds and other process tools. Serial No.: 102010690002 Year of manufacture 2010 Temperature max. 90°C (for water) Heat transfer medium: Water Gjdpfx Aoz N H Dwekhokd Temperature range: +20°C to 90°C Operating overpressure: max. 6 bar Pump capacity: 60 l/min. Tank volume: 2.8 liters (internal filling volume) Heating capacity: 10 kW Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooler) Motor power of the pump: 1 kW Continuous sound pressure level

Year of construction: 2000, condition: good (used), Number: 0107058 Cooling capacity: 1,100 W at +6° C Gedohri Ahspfx Akhekd Cooling capacity: 1,270 kcal/h at +6° C Maximum temperature: 44 °C Pressure: 25 bar Dimensions: 750 x 460 x 450 mm Weight: 80 kg

Condition: excellent (used), GWK TECO CS 90 E mold temperature controller, water, 95ºC, heating power 6 kW, cooling power 23 kW Features: - Display of functions and errors. - Access to device control at various password-protected levels. - Comparator (monitoring of momentary value parameter tolerance values ​​with alarm signaling). - Electronic medium level control with dry-run protection. - Automatic filling and refilling with medium level monitoring. - Additional option for manual filling with treated water. - Automatic air venting. - Leaky mold management function. - Mold emptying. Control / Security: - Temperature sensor in the power supply circuit. - Overheating protection. - Contactless heating control with solid-state relays. - Safe temperature reduction upon shutdown. - Acoustic alarm signal (horn). - Symmetrical network load with three-phase drive and three-phase heaters. - 3-fold safety heating exclusion Gksdpfxoznl Duj Akhed

Condition: used, Weiss   Type: WK3-340/40   Weiss Climate Test Chamber, Water-Cooled   (Refrigerant converted to R-452A)   Temperature Testing   Volume: 335 liters   Test Chamber Dimensions:   Test Chamber Dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External Dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm   Minimum Temperature: -42°C Maximum Temperature: +180°C   Temperature Change Rate, Cooling: 4 K/min Temperature Change Rate, Heating: 3.2 K/min   Temperature Deviation, Time: ± 0.1 to ± 0.5 K Temperature Homogeneity, Spatial: ± 0.5 to ± 1.5 K   Climate Testing:   Temperature Range: +10°C to +95°C Dew Point Range: -3°C to +94°C Humidity Range: 10 to 98% RH   Temperature Deviation, Time: ± 0.1 to ± 0.3 K Temperature Homogeneity, Spatial: ± 0.5 to ± 1 K Humidity Deviation, Time: ± 1 to ± 3% RH   Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Power: 4.1 kW, Rated Current: 14 A   Refrigerant: R-452A Weight: Approx. 515 kg   For your safety as a buyer, please note the following information!   The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Godpfx Akozgavvohjkd   Condition: used   Scope of Delivery: (See image)   (Changes and errors in technical data are subject to change!)   We will be happy to answer any further questions you may have over the phone.

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW Godsg Ewwropfx Akhskd *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, Feutron Gksdpfxszd Sdmo Akhed Type: 3702/06 Water-cooled climate testing chamber Technical data: Test chamber nominal volume: 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum insertion dimensions: Width: 2970 mm, Height: 2390 mm, Depth: 1550 mm Test chamber: Width: 2000 mm, Height: 1000 mm, Depth: 1000 mm Door: double-leaf, clear opening width: 2000 mm, height: 1000 mm Viewing window: heated, 2 pieces, width: 500 mm, height: 600 mm Feedthrough opening: 1 piece, left side wall, diameter: 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature difference, over time: ≤ ± 0.5...± 1.0 ΔN/K Rate of change measured in the supply air, without load Cooling: up to 2.0 K/min on average Heating: up to 2.0 K/min on average Humidity range: 10...95 % r.h. Humidity difference, over time: ≤ ± 3.0 % r.h. Dew point range, intermittently: -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Climate and drying refrigeration system: air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/, 50Hz Power plug: CEE 5-pole, 32 A, with 5.0 m cable Max. simultaneous power consumption: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 1996, Manufacturer: Vulcanic Model: Vulcatherm Catalogue number: 829721-01 Type: Temperature controller Date: 1996   Weight: 210 kg Max. pressure: 10 bar G Max. temperature: 90 °C Thermal fluid: water Gkodpfsx R A A Njx Akhod  

Condition: used, Year of construction: 2009, Manufacturer / Brand: HB-THERM Model / Type: HB-160Z1 (Serial number: 909-9512) Year of manufacture: 2009 Heat transfer medium: Pressurized water (closed circuit) Maximum temperature: 160 °C Maximum system pressure: 20 bar Internal fluid volume: 1.5 L Heating capacity: 8.0 kW Pump capacity: 1.0 kW (max. flow rate 60 L/min, max. discharge head 60 m) Cooling capacity: 30 kW (at 60 K temperature difference) Supply voltage: 380–420 V (3~, 50–60 Hz) Nominal ratings: 400 V, 50 Hz | 14 A | Total power consumption 9.1 kW Gkedpfxjz D T Tts Akhed Cooling water inlet pressure: 2 to 5 bar Additional equipment: DFM 8 flow measurement module (HB-FM160-20), 4-zone manifold (circuits 1, 9, 8, 7)

Condition: used, Year of construction: 1992, Temperature controller, temperature control device, temperature control device, modular temperature control device, tool heater -Manufacturer: PSG, temperature control device for tool heating up to 8 control zones -Type: RSD II 8 Gksdsudqb Aepfx Akhjd -P max: 28 kW -Transport dimensions: 490/430/H460 mm -Weight: 30 kg

Condition: used, Year of construction: 2007, Manufacturer: Solev (Clauger) Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20°C / +230°C Intensity: 51 A. Heating: 25 kW immersion heater Heating control by thyristors. Cooling: No cooling system. Heat transfer fluid: Therminol 66 Gkjdszg Nbhjpfx Akhjd Regulator type 2704 single loop from EUROTHERM Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Filling volume : 69 L - 246 L Documentation available Sold with protective cover.

Condition: used, HB‑Therm HB‑100 U1 tempering unit, Tempering, Liquid tempering, Industrial tempering, Thermolator, Used machine Manufacturer: HB‑Therm Type: HB‑100 U1 Overall dimensions: 200 × 650 × 500 mm Year of manufacture: 2008 Technical data: Gkjdpfx Asx Emfwokhjd Maximum operating temperature: 100 °C Heating capacity: 8 kW Cooling capacity: 30 kW Heat transfer medium: Water

Condition: good (used), Year of construction: 1999, Temperature controller, temperature control unit, temperature regulator, modular temperature control unit Gksdpjqmt Acjfx Akhod -Manufacturer: GWK, temperature control unit -Type: teco 1000 -Heating output: 15 kW -Nominal cooling capacity: 100 kW Technical data: see photo of the nameplate -Dimensions: 1190/320/H750 mm -Weight: 99 kg

Condition: used, Year of construction: 2001, machine/vehicle number: 14947/01, Temperature control unit from manufacturer Robamat, used and untested. The unit is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a multi-circuit system with Thermocast 4212 control system. The medium used is oil*, with a maximum supply temperature of 320 °C. Heating capacity is 34 kW*, pump capacity is 75 l/min at 5.0 bar*. Year of manufacture: 2001, total weight: 350 kg. Godpfoy Sukujx Akhekd

Year of construction: 2008, condition: ready for operation (used), Manufacturer: Wittmann Model: TP-PLUS -2:90 Gkedpfx Aoyk Uvmjkhsd

Condition: used, functionality: fully functional, Single Temperiertechnik STW 1-6-30-M4 Temperature Controller. 4 for sale. 1 piece/300 EUR. Gjdpfx Aowf Anhokhokd Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 1992, Temperature controller, temperature control unit, temperature regulator, modular temperature control unit, tool heater Gsdpfx Akepwngbohokd -Manufacturer: PSG, temperature control unit for tool heating with up to 8 control zones -Type: RSD II 8 -P max: 21 kW -Dimensions: 490/400/H490 mm -Weight: 30 kg

Year of construction: 2001, condition: used, Temperature range 140 °C heating capacity 6,6 kW Cooling capacity 18 kW weight of the machine ca. 72 kg HB-THERM HB-W 140 – Temperature Control Unit for Plastics Processing — ideal for injection molding and plastics processing facilities. Product description: The HB-W 140 temperature control units from HB-THERM (Grossenbacher Apparatebau AG, Switzerland) are proven peripheral devices for the precise temperature control of tools and machines. They are robust, reliable, and can be used with both water and oil. General Specifications - Manufacturer: HB-THERM (Grossenbacher Apparatebau AG), Switzerland - Model: HB-W 140 - Years of manufacture: 2001 Performance & Temperature Range - Heating capacity: 6.6 kW - Cooling capacity: 18 kW - Max. temperature: 140 °C Fluid - Suitable for: Water and oil - Application: Temperature control of injection molds and industrial tools Gksdpfxszhn Tfo Akhed Electrical specifications - Operating voltage: 380 – 420 V / 50 Hz - Connected load: approx. 7.2 kW - Rated current: approx. 11 A Pump & Pressure - Pump power: 0.55 kW - Flow rate: approx. 40 l/min - Head: approx. 60 m - Max. system pressure: 12 bar Machine Type - Industrial temperature control unit - Peripheral device for injection molding and plastics processing

Condition: used, Weiss   Type: WK3-340/40   Weiss Climate Test Chamber, Air-Cooled   Temperature Testing   Volume: 335 liters   Test Chamber Dimensions:   Test Chamber Dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External Dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm   Minimum Temperature -42°C Maximum Temperature +180°C   Temperature Change Rate, Cooling 4 K/min Temperature Change Rate, Heating 3.2 K/min   Temperature Deviation, Over Time ± 0.1 to ± 0.5 K Temperature Homogeneity, Spatially ± 0.5 to ±1.5 K   Gkedpfxeziyyge Akhjd Climate Testing:   Temperature Range +10°C to +95°C Dew Point Range -3°C to +94°C Humidity Range 10 to 98% RH   Temperature Deviation, Over Time ± 0.1 to ± 0.3 K Temperature Homogeneity, Spatially ± 0.5 to ± 1 K Humidity Deviation, Over Time ± 1 to ± 3 % RH   Halogen Bulb 2 x 24V, 50W Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Power 4.1 kW Rated Current: 14 A   Refrigerant: R-404A Weight: approx. 515 kg   For your peace of mind as a buyer, please note the following information!   The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.