Used Tensile Test for sale (10,822)

Condition: excellent (used), Vötsch Temperature Shock Testing Chamber Type: VT 7012 S2 Manufacturer: Vötsch Industrietechnik GmbH Design: Water-cooled For sale is a two-chamber temperature shock testing chamber from Vötsch, designed for rapid temperature change tests. Suitable for industrial, automotive, aerospace, as well as research and development applications. Temperature Ranges: Hot Chamber: +50 °C to +220 °C Cold Chamber: -80 °C to +70 °C Temperature Data: Temporal temperature deviation: ±1 K Spatial temperature deviation: ±2 K Heating rate, hot chamber: approx. 11 K/min Heating rate, cold chamber: approx. 2 K/min Cooling rate: approx. 3 K/min Test Chamber: Volume: approx. 125 liters Internal dimensions: approx. 470 x 650 x 410 mm Cable entry: Ø 67 mm Electrical Data: Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 10 kW Rated current: approx. 25 A Refrigerant: R404A: 2.9 kg R23: 1.27 kg Pressure Data: ND max.: 22.5 bar HD max.: 25 bar Dimensions: approx. 930 x 2115 x 1970 mm Weight: Pgodpoy Iyuwsfx Ag Ton approx. 1000 kg Equipment: Two-chamber shock testing system Digital control Program operation Observation window Cable entry Condition: Used Optical condition as shown in the pictures Normal storage and usage marks present Scope of delivery: Vötsch VT 7012 S2 temperature shock testing chamber Accessories as shown in the pictures Important Note: All information has been provided to the best of our knowledge based on the pictures, nameplates, and manufacturer information. Shipping is possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by phone.

Condition: excellent (used), RS-Simulators Climate Chamber KSS 600/75-10K Device Data Manufacturer: RS-Simulators Prüf- und Messtechnik GmbH Type: KSS 600/75-10K Design: Climate test chamber / Environmental simulation chamber Cooling: Water-cooled Description Used climate test chamber from RS-Simulators. Suitable for temperature tests, climate tests, material and aging tests. Application in industrial testing and measurement. Technical Data Temperature range: -75 °C to +180 °C Temperature change: Heating/cooling approx. 10 K/min Test chamber volume: approx. 600 liters Dimensions Internal (W x D x H): 840 x 840 x 840 mm External (W x D x H): 1200 x 1600 x 1995 mm Electrical Data 400 V / 3~ / N / PE Current consumption: approx. 55 A Refrigeration System Refrigerant: R404A / R23 R404A: 6.0 kg R23: 3.0 kg Weight approx. 1400 kg Equipment RS-Simulators control panel / operating panel Program operation Observation window Temperature monitoring in the test chamber Operating hour counter Side feed-through Robust industrial design Pedey H Ib Ajpfx Ag Tsgn Scope of delivery RS-Simulators climate chamber KSS 600/75-10K Scope of delivery as shown in the pictures Functional test Refrigerant service Leak test Condition: Used. Condition: See pictures. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: used, Available quantity: 4 units “Removed from a production facility of an automotive supplier, professionally dismantled” Designation: DC high-voltage/insulation test module GH-200.11A Manufacturer: STAHL Prüftechnik Application: Checking and determining voltage and insulation strength Technical data: - Test voltage (setpoint specification): 100 ... 7500 V DC - Control deviation/measurement accuracy: 0.1 % ± 2 V of the setpoint - Rise rate (ramp): 50 V/s - 30 kV/s - Discharge internal resistance: 100 MΩ - Measurement range: 0 ... 7500 V DC - Output isolation: ± 1500 V max. voltage difference between HV 0 output and PE connection - Trigger current: 1 µA ... 10 mA - Measurement ranges: - Range 1: 0 ... 10 mA - Range 2: 0 ... 200 µA - Resolution: 1 nA - Measurement uncertainty: - Range 1 (10 µA to 10 mA): < 0.5 % of the measured value ± 0.5 µA Pjdpfx Agezg Ihge Tjgn - Range 2 (0.5 µA to 200 µA): < 1.0 % of the measured value ± 0.01 µA - Discharge energy: < 350 mJ Interfaces: - Ethernet (Modbus protocol) - Optional: Profinet, EtherCAT - Optional: 2-channel safety circuit Special features: - Safety current limited to 10 mA - Precise insulation measurements in the GΩ range through guard connection - Compact industrial design for installation in automated testing applications - Voltage supply with wide-range input

Condition: used, Year of construction: 1980, functionality: unexamined, machine/vehicle number: GTTS 220, total height: 144 mm, total length: 135 mm, total width: 96 mm, Equipment: documentation/manual, Used Votsch/Weiss GTTS 220 Climate Chamber Manufacturer: Votsch/Weiss Model: GTTS 220 | 20 External dimensions: 135cm x 96cm x 144cm (length x width x height) Max internal dimensions: 65cm x 92cm x 54/40cm (width x depth x height) Voltage: 220/380 V Refrigerant type: R12 Pedpfx Agsx H N Dre Tsgn Includes manual (installation and operation handbook)

Condition: excellent (used), CTS Temperature Test Chamber T-40/25 Technical Data Manufacturer: CTS Clima Temperatur Systeme Type: T-40/25 Temperature Range: -40 °C to +180 °C Test Chamber Volume: 25 liters Temperature Change Rate: Heating: 8.0 K/min Cooling: 6.5 K/min Temperature Deviation over Time: ±0.5 to ±1 K Test Chamber Dimensions (W x D x H): 350 x 240 x 300 mm External Dimensions (W x D x H): Pgodpfxezcxmte Ag Ton 595 x 580 x 860 mm Electrical Data: Rated Voltage: 230 V 1/N 50 Hz Rated Power: 1.86 kW Rated Current: 8.53 A Protection Class: IP20 Refrigerant: R404A Filling Quantity: 0.8 kg Operating Pressure: 25 bar Test Pressure: 20 bar Features: LCD control panel Digital setpoint/actual value display RS232 interface Stainless steel test chamber material 1.4301 Window 200 x 200 mm Lockable door Air-cooled refrigeration unit EASYLog data logger 3 stainless steel shelves Weight: approx. 90 kg For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Scope of supply: (See picture) Inspection possible by appointment. Loading can be arranged. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), H. Köhler HK 320 BF Kesternich Testing Device Manufacturer: H. Köhler KG Type: HK 320 BF Device Type: Kesternich Testing Device / Corrosion Testing Chamber Made in Germany Corrosion testing device for performing Kesternich tests under a sulfur dioxide-containing atmosphere to evaluate the corrosion behavior of materials and coatings. Technical Data Test chamber volume: approx. 300 liters Internal dimensions (W x D x H): approx. 725 x 500 x 750 mm External dimensions (W x D x H): approx. 1070 x 570 x 1970 mm including base frame Temperature range: Room temperature +5 °C to 60 °C Expandable to approx. 75 °C according to the manufacturer's specifications Power connection: 220 V / 50 Hz Power consumption: 1,000 W Compressed air supply: approx. 4.5 - 8 bar required Application Areas Corrosion testing Kesternich test according to the SO₂ method Coating testing Automotive industry Material testing Quality assurance Research and development Equipment Stainless steel test chamber with viewing windows Large front door with locking mechanism Test specimen holders / frames SO₂ gas system Pressure gauge Manual controls Base frame with storage area External control and regulation unit Condition Used device from industrial application. Optical condition as shown in the pictures. Signs of wear and tear due to age and use. Test chamber and equipment are largely complete. Inspection possible by arrangement. Scope of supply: see pictures. Psdpfxszclxve Ag Tegn Loading can be arranged. Errors and changes excepted.

Condition: excellent (used), Liebisch Constamatic S1000M-TR Corrosion Testing System Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: S1000M-TR (4BVL) Made in Germany Corrosion testing system / salt spray chamber for performing salt spray, condensation water, and cyclic climate tests. Technical Data Test chamber volume: approx. 1000 liters External dimensions: approx. 2600 x 1120 x 1255 mm Test chamber dimensions: approx. 1435 x 780 x 600 mm Temperature range, test chamber: ambient temperature to 50 °C Temperature range, humidifier: ambient temperature to 70 °C Test solution reservoir: approx. 100 liters Voltage: 230 V Frequency: 50 - 60 Hz Pedpfezcdyxsx Ag Tegn Phases: 1~ Rated current: 12 A Power consumption: 2700 W Test methods DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B368 MIL STD 202 F-101D VW PV 1210 Equipment Automatic control Temperature control for test chamber and humidifier Salt spray testing Condensation water testing Cyclic climate tests Pressure regulator Manometer Test specimen holders and test rods Reservoir for test solution Large insulated hinged lid with gas springs Condition Used equipment from industrial application. Optical condition according to the images. Interior with visible deposits and color changes due to test media. Control unit is active, the device can be switched on. A complete technical functional test under real test conditions was not carried out by us. Inspection possible by arrangement. Scope of delivery: see images. Loading can be arranged. All information is provided to the best of our knowledge based on nameplates, manufacturer's markings and available information. Subject to errors and changes.

Year of construction: 2011, condition: good (used), Glass plate 6 cameras with illumination Two hoppers + one drive unit Integrated supply bunker 25 L / 50 kg with control unit Skako Bunker 125 Loader for 10 crates Extra lens TC1224 + holder Pedeyu Ivnepfx Ag Tjgn Extra lens TC23056 + holder without UPS

Condition: good (used), Year of construction: 1998, functionality: fully functional, BGU clean air unit type RLG 1000, H2-certified, B1 design, 400 Volt, 1.95 kW, 730 m³/h, weight 150 kg, machine dimensions 1150 x 650 x 1400 mm. Transport possible at extra cost! Pgedpfxjxf E Hko Ag Tjn

Condition: excellent (used), Weiss WT-1300/70/15 Temperature Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Water-cooled temperature testing chamber with touch panel control for temperature tests in research, development, quality assurance, and industry. Pgedpfxsza Dv Ie Ag Tjn Technical Data Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate (heating): 15 K/min Temperature change rate (cooling): 10 K/min Temperature deviation (over time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 2 K Test chamber dimensions: Height 920 mm Width 1100 mm Depth 1330 mm External dimensions: Height approx. 2050 mm Width approx. 1300 mm Depth approx. 3200 mm Permissible test specimen load: Test chamber floor: 150 kg Insert shelf: 50 kg Electrical Data Rated voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated current: 63 A Rated power: 44 kW Refrigeration System Refrigerant R404A: 14.0 kg Refrigerant R23: 5.4 kg R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standing pressure: 18.5 bar Equipment Touch panel control Stainless steel test chamber Multiple insertion levels Side access port Heated door seal Water-cooled refrigeration unit CEE connection CE marking Weight: approx. 1500 kg Condition Used equipment from industrial application. Optical condition as shown in the pictures. For the safety of our customers, the following work will be carried out on the offered climate chambers beforehand: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Scope of delivery: see pictures Shipping or freight transport possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2020, AKE Technologies Vehicle Shaker System Manufacturer: AKE Technologies GmbH Type: Vehicle Shaker System Year of Manufacture: 2020 For sale is a professional vehicle shaker system for vibration, resonance, and NVH (Noise, Vibration & Harshness) testing. The system is used to perform reproducible vibration and load tests on vehicles, assemblies, and components. The system enables the simulation of vehicle vibrations, road influences, resonances, and noise generation under controlled test conditions. Technical Data Operating voltage: 3 x 400 V AC / 50 Hz Control voltage: 24 V DC Power consumption: approx. 4 kW Compressed air supply: 6 bar Compressed air consumption: approx. 0.3 m³/min Total system weight: approx. 4,000 kg Stroke and positioning system: Approx. 1,000 kg load capacity per stroke table, according to documentation Shaker Data AKE HPS350 High-Power Shaker Frequency range: DC to 3,000 Hz Dynamic force: up to approx. 2.6 kN Static force: approx. 11 kN Stroke: approx. 5.5 mm peak-to-peak Max. velocity: approx. 0.74 m/s Max. acceleration: up to approx. 22 g Natural frequency: approx. 65 Hz Software Vibration Research VibrationVIEW AKE Drive File Manager Activated functions: 8 input channels Podszazm Rjpfx Ag Tjgn Sine up to 4900 Hz Random up to 4900 Hz FDR up to 4900 Hz Sine Multichannel Random Multichannel Dual Loop Control Equipment Industrial control cabinet with power electronics Operator computer High-power shaker units Vehicle wheel mounts Stroke and positioning units Lifting columns with crossbeam Measurement and sensor technology Operating and emergency stop units Application Areas NVH analyses Vibration tests Resonance investigations Noise analyses Component testing Endurance tests Research and development Condition Used system from industrial application. Optical condition, see pictures. Scope of delivery AKE Shaker System for Vehicles Control and operating system Industrial control cabinet Operator computer Installed test software High-power shaker units Vehicle wheel mounts Stroke and positioning units Lifting columns with crossbeam Measurement, control and connecting cables Documentation and software media Tools and accessories as shown in the pictures Condition Used system from industrial application. The system has been dismantled and stored. Optical condition as shown in the pictures. Scope of delivery as shown in the pictures. Important note: All information is provided to the best of our knowledge, based on available documentation, software displays and nameplates. Deviations in technical data are possible. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, 10 containers dedicated to hydrogen testing L 6058 x W 2438 x H 2896 mm Ready to be connected to cooling/electrical/H2-N2 systems Cooling capacity: 100 kW Electrical capacity: 40 kW (can be increased to 100 kW) Bench automation software provided (Horiba STARS) Durability testing Characterization testing EU declaration of conformity available Pgodpfezgv Rvox Ag Ton

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Psdpfx Aswhdnhjg Tegn Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Condition: good (used), Year of construction: 2005, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2005 CIMC tank container 20FT ISO tank container, 25,010 L / 1 compartment. T11, UN PORTABLE Steam heating Bottom discharge Design temperature: -40/+130 °C 5Y+CSC test valid until 05/2027 = Additional Information = General information Year of manufacture: Aug. 2005 Model year: 2005 Weights Empty weight: 3,800 kg Podpfx Aozb Ei Esg Togn Payload: 32,200 kg Gross weight: 36,000 kg Functional Cargo volume: 25,000 l Body brand: CIMC ONE WAY 20FT, 25,000L tank container, L4BN, UN Portable, T11 Number of compartments: 1 Condition Technical condition: very good Visual condition: good Further information Contact Arne Honingh for more information.

Condition: excellent (used), Weiss Spray Water Test Unit Type: SWT 600/800-S Manufacturer: Weiss Umwelttechnik GmbH For sale is a professional spray water test unit from the manufacturer Weiss Umwelttechnik. The unit is used to perform standardized water, spray water, and ingress protection tests according to IPX1, IPX2, IPX3, IPX4, IPX4K, and IPX9K. Ideal for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch control panel. Test sequences can be automated. Unit Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800-S Spray Water Test Unit Test types: IPX1 IPX2 IPX3 IPX4 IPX4K IPX9K Stainless steel test chamber Rotating test table Swivel arm system Water circulation Existing test accessories Electrical data Supply voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram no.: 82962 CE marking available Water supply Water inlet: R 3/4" Water outlet: R 1 1/4" Supply pressure: approx. 2 to 6 bar Test pressure IPX9K: approx. 80 to 100 bar adjustable Technical data Turntable speed: approx. 1 to 5 rpm Swivel speed: approx. 60°/s Permissible ambient temperature: approx. 10 °C to 35 °C Noise level: approx. 88 dB(A) Heat dissipation to the environment: Average approx. 1 kW Maximum approx. 3.5 kW Equipment Touch control panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earth bonding point CE marking Pgodjzachcepfx Ag Tsn Robust industrial design Dimensions / Weight Test chamber SWT 600/800: approx. 2,350 x 2,400 x 2,650 mm Test chamber without hinges and door locking: approx. 2,350 x 2,400 x 1,850 mm Weight of test chamber: approx. 650 kg Dimensions of high-pressure unit: approx. 850 x 1,200 x 800 mm Weight of high-pressure unit: approx. 380 kg Total weight: approx. 1,030 kg Documents Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories Nozzle ring / spray ring Test and spray components Swivel arm accessories Flow meter Connection components Tools and keys Documentation Condition Used unit from industrial use. Visual condition see pictures. The unit can be switched on. Display and user interface are functional and visible. Further technical testing, calibration or complete functional testing has not been carried out. Inspection and testing on site possible and desired after prior appointment. Scope of supply Weiss Umwelttechnik SWT 600/800-S spray water test unit High-pressure unit Turntable and swivel arm Test and spray accessories as shown in the pictures Operating manual and documentation Accessories as shown in the pictures The table shown in the photos is not included in the scope of supply. Loading possible by arrangement. Transport and shipping by a suitable freight forwarder required. Dimensions, weights and technical data partially taken from documents. Information may vary. Commercial sale without warranty. Subject to change, errors and prior sale.

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 0 mm max. module 34 min. module 1 total power requirement ca. 15 kW weight of the machine ca. 15 t dimensions of the machine ca. 4,20 x 2,00 x 2,90 m Extra große ZR-Prüfmaschine, Gegenhalter Psdpjt Hw Aaofx Ag Tjgn

Condition: used, Year of construction: 1975, max. wheel diameter 160 - 1.600 mm gear width 250 mm max. module 20 Pgsdpfot Hwptjx Ag Tjn min. module 1,5 total power requirement 1 kW weight of the machine ca. 3 t dimensions of the machine ca. m

Condition: used, Year of construction: 1980, max. wheel diameter 400 mm gear width NA mm Pgjdpfx Aet Hw Ebeg Ton max. module 5 min. module total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Manual Two Flank Gear Tester

Condition: used, LDS V790-335T Vibration Test System with HPA-K CE Amplifier Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V790-335T with HPA-K CE Amplifier Machine Type: Electro-dynamic Vibration Test System / Shaker System Cooling: Air-cooled Vibrator For sale is an industrial vibration test system from the manufacturer LDS (Ling Dynamic Systems). The system was designed for professional vibration and shock testing and is suitable for research and development, quality assurance, environmental simulation, electronics testing, as well as industrial stress and endurance tests. Technical Data Shaker Manufacturer: Ling Dynamic Systems Ltd. (LDS) Product: Air-Cooled Vibrator Model: V790-335T Armature diameter: 335 mm Frequency range: DC to 3,000 Hz Resonant frequency: approx. 2,250 Hz Max. continuous displacement: 50.8 mm pk-pk Max. velocity: 1.5 m/s Sine force peak: approx. 6.67 kN / 1,500 lbf Random force RMS: approx. 6.67 kN / 1,500 lbf Half-sine shock force peak: approx. 26.69 kN / 6,000 lbf Effective moving mass: approx. 13.08 kg Internal load capacity: approx. 160 kg Compressed air supply required: Load support: approx. 5.52 bar / 80 psi Optional air isolation: approx. 5.52 bar / 80 psi Power Amplifier Manufacturer: Ling Dynamic Systems Ltd. (LDS) Product: HPA-K Amplifier Model: HPA-K CE Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 V Current setting according to nameplate: 400 V Maximum connection power: 9.3 kVA Weight of amplifier: approx. 750 kg Equipment LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control and rack units PC workstation with monitor, keyboard, and mouse Cables and connection accessories as shown in the pictures Emergency stop units and safety accessories Existing documents and documentation Areas of Application Vibration testing Shock testing Environmental simulation Electronics testing Automotive industry Aerospace Research and development Quality assurance Industrial stress tests Scope of Delivery LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control and rack units as shown in the pictures PC workstation as shown in the pictures Cables and accessories as shown in the pictures Existing documents / manual Condition Used System from industrial use Optical condition as shown in the pictures Normal signs of wear and tear and storage Inspection and testing on site are possible and expressly desired after prior arrangement. Due to the size and weight, professional dismantling, loading, and transport organization are recommended. Availability: by arrangement. Scope of delivery as shown in the pictures. Pedpfjy Uigcjx Ag Tsgn Changes and errors in the technical data as well as prior sale are reserved.

Year of construction: 2019, condition: defective spare-parts repository (used), functionality: not functional, Important note regarding the item's condition: Please read carefully before purchasing: This item comes from a business closure or warehouse liquidation. We were unable to test the device for functionality, and therefore it is explicitly sold as UNTESTED, DEFECTIVE, and NON-FUNCTIONAL. It is intended solely for hobbyists, technicians for repair purposes, or as a source of spare parts. The sale is made with the exclusion of any warranty regarding functionality or completeness. Product description: Offered is an industrial climate testing chamber / temperature and humidity testing chamber from the manufacturer SHENGS (Shanghai Shengs Electronic Technology Co., Ltd.). Devices of this type are generally used for material tests, aging simulations, or electronic component tests under defined temperature and humidity conditions. Features & visual characteristics (according to the images): • Interior: High-quality stainless steel interior, easy to clean. Includes a solid, perforated insert (grid). • Connections & access: Side cable entry (port) with a plug for passing through sensors or power cables for the test item. • Technical area: Easily accessible technical compartment on the side (electronics, contactors, relays, fan motors, and a stainless steel water tank for the humidification unit are installed). • Mobility: The heavy device is mounted on four stable swivel casters and can therefore be easily positioned at the place of use. • Other: Manometer on the outside, drain/supply hose in the lower area. Technical data (according to the nameplate): • Manufacturer: Shanghai Shengs Electronic Technology Co., Ltd. • Model: STH-2P-C (handwritten) • Year of manufacture / Date: 14.08.2019 Psdpfx Agozcxbwj Tjgn • Serial number: SS-SC19011 • Power supply: 1 phase, 220V AC • Current consumption: 30A Visual condition: The device shows signs of wear and tear due to age and use (scratches, slight dirt, discoloration). A side panel for the technical area seems to be missing or was removed for the photos (please check the pictures carefully). The seals on the interior appear to be intact. All internal components shown in the pictures (circuit boards, cables, water tank) are included in the scope of delivery, but no guarantee is given regarding their functionality or completeness. Scope of delivery: • 1x SHENGS STH-2P-C climate testing chamber (as shown in the photos) • 1x Grid (already installed in the interior) • No other accessories, no manuals, or test reports are included. Shipping and pickup information: Due to its size and weight, regular parcel shipping is not possible. • Pickup: Pickup by the buyer is preferred (Please bring a suitable transport vehicle and possibly helpers/pallet truck). • Shipping via freight forwarder: Can be arranged on request and at the buyer's expense (buyer arranges shipping or freight costs are charged separately).

Year of construction: 1976, condition: used, Technical details: diameter: 500 mm workpiece weight: 30 kg test dia. min.: 200 mm total power requirement: 0,03 kW Pgedpfx Agsyyapxe Ton weight of the machine ca.: 1000 kg dimensions of the machine ca.: 1x0,5x1,06 m

Condition: excellent (used), Memmert Type: UF 450plus Air circulation: forced convection Temperature Temperature range: +20 °C to +300 °C Operating range: at least +10 °C above ambient temperature Setting accuracy: – up to 99.9 °C: 0.1 °C – from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-conductor) Interior and capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Maximum number of inserts: 8 Load per insert: 30 kg Maximum total load: 300 kg Interior: stainless steel, all-round heating External dimensions and weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Electrical data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and regulation Control: ControlCOCKPIT TwinDISPLAY Controller: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, calibration at 3 temperature points Adjustable parameters: temperature, fan speed, exhaust flap, time programs Ventilation Recirculating air: adjustable in 10% steps Fresh air: electronically adjustable Exhaust air: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Pedpfoy T Ictjx Ag Tsgn Safety Temperature limiter (TB), protection class 1 Temperature monitor/limiter (TWW/TWB) selectable ASF system for over- and undertemperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Rear has 2 openings each with approx. 12 cm diameter Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Modernized in 2013 with software Test force max.: 200 kN Podpexw N Uvsfx Ag Tegn Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Condition: used, machine/vehicle number: 5585HK1182, We are offering this used Instron 5585HK1182 universal testing machine for sale. Stroke: 1182 mm Pressing force: 25 t Dimensions (installation): 1.5 x 1.0 x 2.5 m Weight: 952 kg Control system: Instron Blue Hill Pedpfezgv Etjx Ag Tsgn If you have any questions or require further information, please do not hesitate to contact us.

Year of construction: 2011, condition: used, functionality: limited functionality, machine/vehicle number: 8802L1280, We offer this used Instron 2527-113 / 104999 servo-hydraulic dynamic testing machine, model 8802, manufactured in 2011. Manufacturer: Instron Model: 2527-113 / 104999 Serial number: 8802L1280 Control type: Digital control electronics Force: 160 tons Working width: 1120 mm Stroke: 0 - 200 mm Stroke rate: 0 - 6000 1/min Table area: 800 x 560 mm Ram adjustment: 0 - 1100 mm Weight: 2.5 tons Space requirement (W x D x H): 1.1 x 1.2 x 3.6 m Pgodpfxjzgvrts Ag Ten If you have any questions or require further information, please feel free to contact us.