Used Test Machinery for sale (79,485)

Condition: ready for operation (used), The Klingelnberg PSR 500 U worm gear testing machine was designed as a universal machine for the flexible testing of worm gears and is used by manufacturers of gear and transmission technologies for the single-flanking rolling test process for worm gear sets (EFWP). Technical data: Max. worm gear diameter: 500 mm Max. spindle length: 500 mm Max. spindle diameter: 200 mm Center distance: 0 ... 400 mm Max. measuring speed: 60 rpm Braking torque: 2.5 Nm Max. worm gear weight: 150 kg Max. spindle weight: 50 kg Table diameter: 300 mm Machine weight: 800 kg Dimensions: 1500 x 1500 x 1600 mm The following parameters can be measured here: • Flank deviations Fi', fi', fl', fk' • Flank clearance, runout, roundness (option) • Contact pattern with digital camera • Pitch deviation • FFT analysis, spectrum Todpfx Anezxghvelsb *Image shows the machine in its current condition as a retrofit/modernized unit. *Further information about the machine is available upon request.

Condition: good (used), Gossen Metrawatt Profitest 204+ Professional, portable testing system from Gossen Metrawatt (GMC-I) for safety testing in accordance with VDE 0113 / EN 60204-1 (safety of machinery). Technical specifications of the complete system: Tsdpfxozwlwmo Anlob Manufacturer: Gossen Metrawatt (GMC-I), Made in Germany Standards compliance: Testing strictly in accordance with DIN EN 60204-1 / VDE 0113 (Safety of machinery) Protective conductor test: Test current: > 10 A AC at 4 V~ (supplied by the base unit) Measurement range: 0 to 2 Ω Insulation test: Test voltages: Adjustable from 100 V to 500 V DC Measurement range: 0 to 3 GΩ High-voltage test (Module 204HP-2.5 kV): Test voltage: Adjustable from 250 V to 2500 V AC (alternating voltage, 50 Hz) Trip current (limit): Adjustable in steps (e.g., 10 mA, 100 mA) for reliable detection of insulation breakdown Power: Max. 500 VA (short-circuit proof for short durations) TAM test and adapter box: Connections: 16 A CEE (5-pin) & 32 A CEE (5-pin), both with secure 1h coding Laboratory sockets: 4 mm safety banana sockets for single-conductor connection (PE, L1, L2, L3) Scope of delivery for the complete system: Base unit: Gossen Metrawatt PROFITEST 204+ High-voltage module: Profitest 204HP-2.5 kV (Type M505A) for dielectric strength testing up to 2500 V AC Test and adapter box: GMC TAM test box with integrated Mennekes CEE panel-mount sockets (16 A and 32 A with special 1h test coding) and 4 mm safety sockets (PE, L1, L2, L3) Accessories: 2x red high-voltage test guns, including a robust cable set Mobility: Original transport trolley with extendable handle and sturdy wheels "A complete solution: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2012, Parker Engineering & Design Vertical Light Stack Module For testing solar modules Photovoltaic modules Electrical and mechanical safety testing Support for product development, design and quality control Detection of potential problems during development Quality and safety control  Endurance test stand  Temperature control  Mobile on rollers Entry pockets for forklift trucks 400 VAC, 3.PH, 50 AMP IR. 10,000 amp Tedpjh Rvh Ssfx Anlob Year 2012 Weight 1400 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further test equipment - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2012, XEIKON 3300 DIGITAL label printing machine  Type: 3300  Year: 2012  Total counter. 17191 hours  Colors CYMK + White or Orange  Gold maintenance contract  Media width: 200-330mmpi with variable dot density  Print resolution: 1200dpi  Speed 19m / min  Ice Toner  High productivity through full rotary printing regardless of the number of colors or the repeat length of the job  Media weight: 40 - 350 g / m² (27 lb text to 122 lb cover) Todorp E D Hopfx Anlob  Unwind  Rewind until 125cm

Year of construction: 2025, condition: as good as new (ex-display), Single-column table-top machine max. testing force 2.5 kN, most modern WINDOWS software (freely programmable test sequences), over 600 finished test results, Machine price WITHOUT clamping device as the final equipment is based on your requirements: included in the price: - Machine in working order - incl. load cell 2,5 kN (grade 05 from 25 - 2500 N / grade 1 from 5 - 25 N - Warranty 24 months - Software LabTest - unsurpassed flexibility, complete software - without clamping tool - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - Mechanical clamping device - Hydraulic clamping tool - Bending tools - compression plates - Clip-on extensometer - Probe arm extensometer - Video extensometer - Laser speckle extensometer Tsdpfx Ascw Ix Sjnlsb - Climate chambers - High temperature / hot draft furnaces ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Year of construction: 2025, condition: new, Max. testing force 5 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Tsdpfxodb Nfpo Anlob Price includes: - Machine 100 % functional - incl. load cell 5 kN (quality class 0.5 from 50 - 5000 N) - warranty 24 month - software Graphwork 6 (actual) - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. setup, training Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for non contact measuring of elongation for metal, plastic and other... Please ask for different machines with higher / lower forces, special equipment or applications: We offer new machines with highest quality and best price ratio at fair prices! Photos shows machine with optional equipment!

Condition: new, empty load weight: 570 kg, maximum load weight: 2,130 kg, overall weight: 2,700 kg, loading space length: 2,920 mm, loading space width: 1,520 mm, loading space height: 350 mm, tire size: 195/50R13C, Car trailer for transporting construction machinery from trailer manufacturer TEMARED model Builder3-3015/2S 2700kg. The standard equipment of the construction machinery trailer is a stable frame, drive-over flap, bucket support support wheel and a V-drawbar. Tjdpfjq Ecvdjx Anlob This machine trailer is also available in other dimensions. We also offer accessories for excavator trailers such as tool box, lashing straps, drawbar protection cover and anti-theft device at a reasonable price.

Year of construction: 2008, condition: new, GALLUS EM 510 S - 5 color UV-FLEXO Machine information: The Gallus 510 S can be used to produce self-adhesive and monofoil labels as well as a wide range of other products. A state-of-the-art servo-driven web-feed system ensures optimum cost-effectiveness and superb quality results. Combined with the unique platform concept and the consistent modular design, these machines are a secure investment in your success - both now and in the future. Specifications:  Brand / type: GALLUS / 510S /Servo driven - like new!!! Tedequvidjpfx Anljb  Age : 2008 - like new  Counter : Only 9.424 hour/runs  Webwidth : 510mm  5 x Flexo Units  5 x U-Dryer  BST Power Scope 300 (Web monitoring system)  Unwinder max.: 1250mm  Rewinder max.: 1250mm  Lamination/Cold foil  Turnbar  Remailing 24"  Ben Bunch 500  Cross Cutting Cylinder  punching units (length: 12" - 26")  good condition - like new!!!  Unwind Capacity 1250 mm  Rewind Capacity 40 inch - 1250 mm Description: Now you can have it all - reliable performance, exceptional efficiencies and superior quality - at a great value. The Performance Series P3 model is a modular platform that can be configured to support a variety of conventional pressure sensitive applications. Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hypoid adjustment ±70 mm axial cross angle 90 ° Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm turning speed range - stepless 0 - 5000 U/min Tedpsukitxofx Anljb max. torque on the spindle 57 Nm Cone 99,2 mm Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2,35 x 2,24 x 2,5 m

Year of construction: 2024, condition: new, Universal testing machine H50TMCI / 900 Watt Tjdsiq Hxcepfx Anlsb Mechanical design: in accordance with DIN EN ISO 7500-1) 2 backlash-free ball screws, drive via AC servomotor, Fmax = 50 kN, stiffness 65 kN/mm 1 working area up to nominal load: Working area width: 510 mm (optional widening: +240mm / +530mm) Max. test stroke without testing tools, adapters and load cells: 1095 mm (optional extensions: +250mm / +500mm) Optional: Conversion to a benchtop model, required additional component: base table Travel speeds: Test speed 0.001 - 800 mm/min at full load Return speed 800 mm/min Force measurement: Measuring range: in the range of 0.4 - 100 % of the nominal load, class 1 (optional class 0.5) (+/- 1 % of the displayed value in accordance with DIN EN ISO 7500-1) Resolution of the force measurement: +/-180,000 digits with a 20ms integration time The machine is supplied with a factory test certificate. If a factory or DKD calibration is to be performed at the customer's location upon request, this additional effort must be calculated separately. Crosshead travel measurement: Incremental square-wave input with encoder monitoring, storage of the crosshead position Resolution of the crosshead travel measurement:

Year of construction: 2024, condition: new, Universal testing machine H 5 TMNI (L) 250mm, extended Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screws, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm 1 working area up to nominal load: Working area width: 420 mm Max. testing stroke without testing tools, adapters, and central measuring device: 1270 mm Max. testing area height (between lower fixed and moving crosshead) without testing tools, adapters, and central measuring device: 1325 mm Travel speeds: Testing speed 0.001 - 1200 mm/min up to nominal load Return speed 1200 mm/min Force measurement: Measuring range depending on the force measuring sensor used, 0.4 - 100% of the nominal load, Class 1 (optionally Class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/- 160,000 and +/- 900,000 digits. The machine is supplied with a factory test certificate. If a factory or DAkkS calibration is to be performed at the installation site upon customer request, this effort must be calculated separately. Crosshead travel measurement: Incremental square-wave input with encoder monitoring, storage of the crosshead position Todjiq Hxvjpfx Anlsb Resolution of the crosshead travel measurement:

Year of construction: 2004, operating hours: 34,304 h, condition: excellent (used), Weiss climatic test chamber -70 to +180 °C Manufacturer: Weiss Umwelttechnik GmbH Type: Climatic chamber WK-1000/70 Test chamber volume: 990 liters Temp. range: -70 to +180 °C Tjdpfx Aeph U Aysnljb Humidity: 10 to 98 % Mains voltage: 400 V 3/N 50 Hz Rated current: 29 A Nominal output: 13.8 kW Refrigerant: R 404A Control system SIMCON/32 microprocessor-controlled control and monitoring system - 32 bit technology - Graphic display of setpoint and actual value - Digital setpoint and actual value display of temperature and % relative humidity - digital input for temperature in °C and humidity in % rel. humidity - Integrated programmer - program memory - Manual and automatic operation - Fault diagnosis system Operating hours: 34303.8 h Year of construction: 2004 Test area dimensions: Height: 950 mm Width: 1100 mm Depth: 950 mm External dimensions: Width: 1400 mm Depth: 1900 mm Height: 1970 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Year of construction: 2018, condition: like new (used), GRAFOTRONIC DCL2, Age: 2017/2018  Manufacturer : GRAFOTRONIC  Year of Installation : 2017 with Upgrade 2018  Max. width: 350mm  Unwinding diameter: 1000mm  Web edge control  Semi rotary printing unit  GEW Drying UV  Semi-rotative die-cutting / drawn onto sheet metal  Laminating  Cold foil stamping  Labelshifter  Punching length: 609,6mm  Lattice proofing  manual knife box  Automatic Turret Tjdpfx Asncfuksnljb  2 x spindle

Condition: used, Trailers, construction machinery trailers -Remark: Vehicle registration missing, electrical wiring missing / damaged -Trailer: Construction machinery trailer -Loading area: 2220/1085/H420 mm, border height 410 mm -Overrun device: HahnType ABV25. 1DZKE 2010 up to 2500 kg -Support load: 100 kg Todpfx Aen Uy Awjnleb -Dimensions: 4175/2030/H980 mm -Own weight: 650 kg -Handover: in the current condition as viewed

Condition: excellent (used), Complete contents of protein powder factory which was set up in 2015. All Machinery in lovely condition. Machinery includes Winkworth style mixer, All-Fill pot and bucket filling lines, Pharma Systems capsule and tablet counters, sieves etc. PLEASE NOTE THAT THE LARGE WINKWORTH MIXER IS NO LONGER AVAILABLE. ALL OTHER ITEMS ARE STILL HERE. Tsdsw Nivlspfx Anljb

Condition: used, Year of construction: 2009, functionality: fully functional, 1 Universal Testing Machine Type H 10 KM Used device with Windows 11 software for tensile, compression, and bending tests; comes with one pair of wedge grips up to 10 kN and a certificate for tensile and compression displacement measurement. For testing in tension, compression, shear, bending, etc. • This is a dual-spindle benchtop model. • The machine complies with DIN 51220 and 51221, Class 1. • Digital display for force and displacement, 4½ digits, with peak value memory. • Five-range automatic switching for force and displacement measurements. • Digital speed adjustment from 0.5 to 1000 mm/min in increments of 0.1 mm. • Break detector and automatic return function are standard features. • Driven by a precision servo motor with high-frequency chopper control unit and digital feedback for load-independent, constant speed. • Quiet operation thanks to toothed belt drive and ball screw spindles with bellows cover. • Fully computer-controllable via RS 232 interface. Max. load: 10 kN in tension and compression Max. travel: 1150 mm without grips Force measurement: Strain gauge Todpfoxghlfsx Anljb Measurement principle: Temperature-compensated Displacement measurement: Built-in optical encoder, 0.01 mm resolution Power supply: 220-250 V, 50-60 Hz Power consumption: 1.0 kW Dimensions: Height 1575 mm, Width 635 mm Clear width of frame: 410 mm Weight: approx. 95 kg Includes: 10 kN load cell and certificate for force and displacement.

Condition: good (used), Brüel & Kjær Vibration Test System 4812 + 4801 Shaker Technical Specifications – Exciter Head 4812 • Max. dynamic force: 445 N (100 lbf) with Body 4801 • Current consumption: 23 A RMS with cooling / 11.5 A without • Resonance frequency: 7.2 kHz • Travel: 12.7 mm continuous / 14 mm maximum • Acceleration limit: 981 m/s² • Bolt torque limit: 3.4 Nm • Dimensions: Ø 235 mm × 178 mm • Weight: 8 kg • Material: hard-anodized aluminum Technical Specifications – Exciter Body 4801 • Power supply: 380 V ±10% or 440 V ±10%, 3-phase, 50 Hz • Cooling: Air-cooled (integrated fan) • Mounting height (without head): 370–405 mm • Additional height due to head: +50 to +130 mm • Weight: 75–80 kg Description & Use: Condition: Used (see pictures). Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Tjdsxlz Uwopfx Anleb Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: good (used), Year of construction: 2008, OMET FLEXY S330 Year of Manufacture: 2008 _____ Technical Specifications: - Number of Colors: 8 - Web Width: 350 mm - Print Width: 330 mm - Drying System: o UV drying on all stations o 3 additional hot air dryers Unwinder: Single Rewinder: Double _____ Additional features: - 3 Corona Treaters - 1 turn bar - Material thickness: Min. 50 μm, Max. 350 μm - 1 Turn Bar for cold foil lamination - 2 Cutting Stations Todpfx Aou St R Eenlob - 1 Laminating Unit for varnishing and self-adhesive lamination - Coldfoil - Camera Inspection _____

Year of construction: 2002, condition: good (used), Vötsch VTSR 7034/S Climatic Test Chamber -70 to +180°C Todpfxouuif No Anleb Manufacturer: Vötsch Type: VTSR 7034/S Test Chamber Capacity: 335 liters Climatic Test Chamber Temp. Range: -70 to +180°C Line Voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated Current: 22 A Rated Power: 12.5 kW Refrigerant (VK): R 404 A Refrigerant (TK): R 23 Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Year of Manufacture: 2002 TK-11 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Vötsch VC 0150 Climatic Test Chamber 0°C - +90°C Manufacturer: Vötsch Type: VC 0150 Climatic Test Chamber Voltage: 230 V Rated Power: 1.5 kW Voltage: 1540 liters Temperature Range: 0°C to +90°C Humidity: 10% to 98% Refrigerant: R 134a Dimensions: W 950 x D 1100 x H 1475 mm Microprocessor Controller List Price: €19,500 KK-09 Financing through our bank is also possible. komplett-konzept.leasingo.de Tsdpfx Anjuuikfelsb Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), Year of construction: 1999, Nema corrosion test chamber for salt spray tests Manufacturer: Nema Type: NSN 300 Rated voltage: 400 V Rated current: 11 A Compressed air: 8-10 bar Air consumption: 6 Nm³/h Humidifier: 0.5 l/h Water pressure: 2-8 bar Power consumption: 5.6 kW Salt solution: NaCl: 50 +- 5.6 kW External dimensions (WxDxH) 3200 x 1200 x 1900 mm Internal dimensions of the test chamber (WxDxH) 3100 x 1000 x 880 mm Weight: 390 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further items in other sizes - new and used - can be found in our store! International shipping costs on request! Todpfx Aju Ecrxonljb

Year of construction: 1993, condition: good (used), ROTOFLEX VLI 330 Tjdpfx Ansvwkhnslob INSPECTION – SLITTER – REWINDER Machine information: Rotoflex products are proven in practical applications with self-adhesive labels, processing, blister foils, and all kinds of paper. This professional and heavy duty die-cutter with slitter/rewinder and label checking will rewind rolls in a perfect register with a max. diameter of 700 mms and a max. width of 330 mms into smaller sized rolls. During the process the labels can be checked for quality and missing labels. Specifications:  Max. web width: 330 mms  Roll diameter: unwind: 700 mms / rewind: 400 mms  Shaft diameter: unwind: 76 mms / rewind: 76 mms  Max. speed: 230 m/min.  Slitters  Rewinders  Splice table

Condition: used, functionality: unexamined, Ferwood code: RU0011648 - Manufacturer code: K6343K0950 - Condition: Used - Functionality: Not tested - If interested, we offer overhaul service, please contact us. Tjdpfjwtnmlex Anljb

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series Tedsxqxt Ispfx Anlob - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: good (used), functionality: fully functional, mobile extraction unit suction pipe 100 mm diameter filter cleaned H2 dust tested 720 m³/h 1.1 kW Tedpfx Aox U Dbhjnlsb Transport available at extra cost!