Used Tft Replacement Monitor for sale (6,987)

Condition: used, Year of construction: 2017, operating hours: 6,925 h, Serial number: DM0xxxx Please contact ATS Norway for more information Chsdpfx Aasxc Drmscjd Please provide reference number upon request: 19775 Specifications: - 2017 model - ca 7300 Hours - Certified to: 10/25 - Machine width: 232 cm - 8300 kg - 53.7 kW - Quick release - Central grease - Extra hydraulics - Cutter - Replaced control arms - Rubber belts - Rototilt - Sanding bucket - Climate - Light - Radio - Ready for delivery Description: Eurocomach ES85 SB4 Excavator with rototilt and sanding bucket for sale. The machine functions as it should according to the owner. The control arms and cylinder have just been replaced on it. New, used belts are also installed on the machine. Some looseness in the boom attachment, otherwise in good condition. Ready for delivery. Hours: 6925 Total Weight: 8300 Year controlled: Yes Year controlled until: 10.25 Width: 232 Kw: 53.7

Condition: used, Year of construction: 2005, Perfect binding line Kolbus ZU 841.A - KM 473 Year: 2005 Consisting of Chedpfxjxd Dm Hj Aaced Gathering machine Kolbus ZU 841.A Year: 2005 Description: - Colour monitor with touch screen - Number of gathering stations: 20 (15 x incl Signalynx bar code reader),( 4 x Optoelectronic signature recognation) - Air center: Variair - Set up element - Transfer into the binder Perfect binder Kolbus KM 473 Year: 2005 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 27 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 370 - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson Durapail - Base for side glue system - Hotmelt side glue unit, interchangeable - Gauzing station - Stream cover feeder: SAL 411.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down delivery Transport system Kolbus Description: - Escape delivery Conveyor tower: 2x Max. mechanical speed: 8.000 cycles/h Maximum size range: 383 x 320 x 70 mm Maximum size range: 460 x 190 x 70 mm Minimum size range: 105 x 100 x 3 mm

Condition: good (used), Year of construction: 2006, Ref:10979 . 2006 Heidelberg Stahl TH82/64K-RFH 16pp High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. Codpfx Aaowxw Snjcjhd • Sound hoods covering all buckle units. • SBP.D presser/stacker delivery unit. Including compressor, tools, spares & manuals. Accessories: Electronic gate-fold plate with control unit (to be confirmed). VFZ mobile electronic ‘Z’ knife 32 page fold unit. Folding sequence: 1st buckle unit - 82cm with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - 66cm with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - 56cm with 4 plates, perforating/scoring shafts VFZ mobile electronic knife fold. Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm Fold length, Min: 6 cm Mechanical speed : 50 - 230 m/min Folding production : Max. Buckle 50,000 s.p.h. Option of: 2010 Palamides Alpha 500 Plus Presser/Stacker

Condition: used, Year of construction: 2008, Tetra Pak tetra top fillers are a type of equipment used in the food and beverage industry for packaging products in Tetra Pak cartons. Here’s some more information about them: - Purpose: Tetra top fillers are designed to efficiently fill cartons with liquid products, such as dairy, juice, and sauces, in a sterile environment, ensuring product safety and shelf life. - Technology: These fillers utilize advanced technology to maintain hygiene and optimize filling speed and efficiency. They often incorporate features such as easy cleaning and maintenance. - Carton Design: The tetra top cartons have a unique shape that provides good stackability and shelf stability. They often come with a separate opening mechanism, allowing for easy pouring. - Sustainability: Tetra Pak emphasizes sustainability in their products, utilizing renewable materials and ensuring that their packaging can be recycled or reused. - Customization: Depending on the production requirements, these fillers can be customized in terms of size, speed, and features to meet specific needs. The technical details of Tetra Pak Tetra Top fillers can vary based on the specific model and intended application, but here are some common characteristics and features: - Filling Capacity: Tetra top fillers can generally handle a variety of filling volumes, typically ranging from 100ml to 3 liters, depending on the carton size. - Filling Speed: The fillers are designed for high efficiency, often achieving speeds of several thousand cartons per hour (e.g., 3,000 to 12,000 cartons/hour), ensuring a swift production process. - Sterilization: These systems usually include advanced sterilization methods such as: - Aseptic Filling: Ensures that both the product and the packaging are sterilized to prevent contamination. - Heat Treatment: Some models feature heat treatment capabilities for extending the shelf life of the product. - Control Systems: Modern Tetra top fillers come equipped with sophisticated automation and control systems, often using PLC (Programmable Logic Controller) technology for precise operation and monitoring. - Material Compatibility: These fillers are designed to handle a wide range of liquid products, including those that are viscous or require gentle handling, such as yogurt or pulp-containing juices. Chjdpfxoxqfg Uj Aacod - User Interface: Many fillers feature user-friendly control panels with touchscreen interfaces for easy operation and monitoring. - Maintenance: They often include designs aimed at minimizing downtime, with features for quick changeovers and easy access for cleaning and maintenance. - Energy Efficiency: Tetra Pak focuses on minimizing energy consumption in their machines, incorporating energy-efficient motors and systems. Available: Immediately Format: 1 Litre Condition: Good Inspection: Possible

Condition: used, Keysight / Scienlab Battery Test System Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Test System – For Laboratory Use, including PC, software & technical documentation For sale is a professional battery test system consisting of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber - Monitoring/Sampling Unit - Control PC with original software - Technical documentation The system is fully functional, well maintained, and ideal for battery module testing, research, development, and quality assurance. Technical Data – Scienlab SL1001A: Characteristic / Description Manufacturer: Keysight / Scienlab Model: SL1001A Year of manufacture: 2020 Voltage / Current / Power: 80 V / 600 A / 24 kW Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m Weight: approx. 700 kg Function: Charging, discharging, cycling of battery modules Condition: Very well maintained, laboratory use Technical Data – Angelantoni DM500 C 10 ESS SPEEDY BT SP: Characteristic / Description Manufacturer: Angelantoni Industrie S.r.l., Italy Model: DM500 C 10 ESS SPEEDY BT SP Year of manufacture: 2019 Weight: approx. 1225 kg Temperature range: −70 °C … +180 °C Humidity range: 10 … 98% RH Refrigerants: R449A + R23 Pressure ranges (PS Hi/Lo): 28 bar / 8 bar Wi-Fi integrated CE marking present Internal dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m Function: Temperature and humidity testing, ESS (Environmental Stress Screening) Power supply: 3PH + N + PE, 400 V ±10 %, 50 Hz, full load 54 A Max. power consumption: 32.5 kW Monitoring / Sampling Unit Dimensions: 0.6 × 0.5 × 0.2 m Measured variables: cell voltages, current, temperature Interfaces: CAN, Ethernet Compatible with Scienlab / Keysight PathWave Software PC + Software + Documentation Industrial PC with control and measurement software Allows for automated test sequences, logging, and data analysis Overall dimensions / weight (approx.) Component Dimensions (L×W×H) Weight Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Angelantoni Climate Chamber 1.6 × 2.3 × 3.3 m 1225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Complete system approx. L 3.2 m × W 2.5 m × H 3.3 m approx. 1975 kg Areas of Application: - Development, testing and lifetime assessment of battery modules (e.g., Li-Ion, LFP, NMC) - Fast charging and cycle tests - Temperature and humidity environmental simulation - Research, industrial and university laboratories Scope of delivery: - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber - Monitoring / sampling unit - Control PC with software - Technical documentation and manuals Chjdpfx Aoxuqk Hsacod - Connection cables and accessories (as available) Condition: Used Scope of delivery: (See picture) (Specifications and technical details are subject to change or error!) If you have further questions, feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2016, Linde Cryoline MT1250 Freezing tunnel Serial: 5-199 2016, Linde CRYOLINE MT 1250 Cryogen/Nitrogen Tunnel Freezer, a top-of-the-line freezing solution for your industrial needs. This machine boasts a cooling capacity of 100 kW/29.41 tons, ensuring efficient and rapid freezing of your products. The fully stainless steel construction, including a fine stainless steel mesh belt, guarantees durability and hygiene compliance. With a net belt width of 1250 mm and a freezing belt length of 4000 mm, this freezer can accommodate a wide range of products with a maximum height of 100 mm. Csdpfxet N Upcj Aacshd Equipped with 6 internal high-speed fans that are adjustable, you have full control over the freezing process. The holding time can be set between 0.5 and 20 minutes, providing flexibility based on your specific requirements. The stainless steel switch-board cabinet features a Siemens PLC and HMI Simatic touchscreen for easy operation and monitoring. This Cryoline MT 1250 Cooling Tunnel, manufactured in 2016, operates on N2/Stikstof refrigerant and requires a voltage of 380-500V (50-60Hz). With an absorbed power of 5 kW, this machine is both powerful and energy-efficient. Don't miss out on this opportunity to enhance your production line with this reliable and high-performance freezer.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 01/2023, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2023, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 45 SMART. Cooling unit Thermo King SLX i 300-50, Diesel/Electric,. including installation and connection of th Container type double rear doors, 3 piece aluminium hinges on each door half; quick replacement doo Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm. Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock. Tyres - 6 x 385/65 R22.5. Internal length: 13311mm. Internal width: approx. 2490mm. Internal height: 2650mm. Total height (unl Pallet box for 36 Euro-pallets. Chjdpfoxtphnjx Aacsd Chassis MB 7350 NOVA GREY SDGL. Axles including hub RAL 9005 JET BLACK. Ventilation flap, at the front wall, at top of left side. Ventilation flap, at rear, left side at to spare wheel 385/65 R22.5.

Condition: good (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, double-sided, rotational speed infinitely variable, type plate available, 2008 ACME Robotic Polishing Cell with Fanuc M-710i Robot – Fully Automated Metal Finishing Solution Cedpfxoxtftye Aacehd Looking for a high-performance robotic metal polishing system? Don’t miss this 2008 ACME Manufacturing Co. Robotic Polishing Cell, engineered for precision, consistency, and automation. Ideal for metal finishing, surface treatment, automotive, aerospace, or industrial manufacturing. 🔧 Manufacturer: ACME Manufacturing Co. 🚨 Machine Type: Robotic Polishing Cell 📅 Year of Manufacture: 2008 🤖 Robot Model: Fanuc M-710i 📍 Location: Ireland 📦 Condition: Good – fully operational and maintained 🟢 Availability: Immediate ✅ Machine Overview: This 2008 ACME robotic metal polishing cell is a fully automated surface finishing system equipped with a Fanuc M-710i 6-axis robot and designed for precision metal polishing in high-volume environments. Ideal for manufacturers in medical device, automotive, aerospace, general engineering, or stainless steel finishing sectors. 💡 System Includes: ✅ Fanuc M-710i Industrial Robot – Reliable 6-axis automation for complex polishing paths ✅ Two Twin-Head Polishing Stations – Simultaneous dual-surface processing ✅ Automatic Polishing Paste Delivery Units – Supports both fine and coarse pastes for optimal finish ✅ Vibration Monitoring Point – Ensures consistent surface quality and machine health 📈 Benefits: Increased throughput and reduced labor costs Repeatable, uniform polishing quality Fully automated and programmable – minimal operator input Compact, integrated cell for efficient floor space use Core Functionality Material Removal: The robotic system employs abrasive belts or wheels to remove material from workpieces, effectively smoothing edges, removing imperfections like flash, and achieving specific surface finishes. Precision and Repeatability: Unlike manual polishing, which can vary from part to part, robotic systems ensure consistent and repeatable results, crucial for high-precision applications. Versatility: ACME cells can be adapted for a wide range of materials and part geometries, including orthopedic implants, automotive components, and more. Integrated Automation: These cells often feature part handling systems, like conveyors and dual-drawer arrangements, to enable continuous and unattended operation. Dust and Sound Containment: Built-in enclosures help confine dust and noise generated during the process, improving safety and environmental conditions. Key Features and Benefits Increased Production Rates: Robotic polishing can significantly increase the number of parts processed per hour compared to manual methods. Reduced Costs: By automating the process, companies can reduce abrasive media costs, labor costs, and potentially decrease scrap rates. Improved Safety: Robotic systems eliminate the need for operators to manually handle potentially hazardous materials and tools. Enhanced Consistency: Robots deliver consistent, repeatable results, ensuring uniform quality across all parts. Process Optimization: ACME cells allow for programmable belt speeds and other parameters, enabling optimization for different materials and finishes.

Condition: ready for operation (used), Year of construction: 2004, PET preform injection molding machine clamping force 320t injection weight 6935gr. screw 130mm preform removal system SERVO IV, TPS robot TRT-M4-72-E, 72-fold, 4-stage, incl. removal set, conveyor belt LT/h 1825 Output approx. 17,000 preforms/hour Option1: MHT mold 72-cavity for 30.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.5 liter bottles) Option2: 72 core sets for 27.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.0 liter bottles) Chsdpfx Aasnxkxwecjd Line comes from our own preform production and was in production until our new line was replaced.

Condition: used, Year of construction: 2011, CNC Machining Center Biesse skill 15 36 G FT Year of construction 2011 Machine no. 52549 Recording HSK F63 10x vertical drilling 12 switch positions Software: BiesseWorks X axis 3765 mm Y axis 1560 mm Z axis 324 mm Csdpfx Aaewnh Ifecohd Inclusive - 2x vacuum pump, Busch Mink MM1322 AV; 360m³/h - Safety mats Spindle bearings need to be replaced, sounds bad. Disassembled for transport on normal trailer; 6000x2400x2400mm; Own weight 2500kg - Year: 2011 - Documentation available: No - Tool clamping system: HSK-F63 - Drilling unit present: No - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 12 - Safety feature: Safety light curtain, Door interlock switches, Enclosed fence, Bumper guard, Safety mat - Vacuum pump present: Yes - └ Brand: Busch Mink - └ Type: MM1322AV - └ Capacity [m³/h]: 360 - Working range X [mm]: 3765 - Working range Y [mm]: 1560 - Z-axis working range [mm]: 324 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Chsdpfx Aasxugiroced Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2010, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale weight: 700 kg, overall weight: 33,000 kg, oil tank capacity: 2,000 l, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Csdpfsxr N Tbsx Aacohd Type VK 8818 FU Year of construction 2010 Operating hours approx. 40.000 hours, as of July 2025 Main press force 880 kN Specific pressing force 107 N/cm² Pressing force cutting edges free rammer 121 kN Dimensions of feed chute 990 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW, frequency-controlled Connected load 105 kW Total current consumption 200 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 500 up to 700 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 12,130 x 4,800 x 3.270 mm (l x w x h) Press dimensions with conveyor system 14,000 x 23,000 x 7,745 mm (l x w x h) Transport weight baler approx 33 t (Main press approx. 12 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition and is cleaned, lubricated and maintained by the operator on a weekly basis in accordance with the manufacturer's specifications. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2010 Belt speed 0,36 m/sec. Length feeding conveyor 7,000 mm Length elevating conveyor 13,905 mm Length goose neck 3,732 mm Grade 30° Nominal width 1,800 mm Effecting width 1,641 mm Height conveyor over all 7,745 mm Pit dimensions to conveyor belt 12,200 x 3,000 x 1,500 (l x w x h) Scope of delivery: The conveyor belt (without steel podium and maintenance platform), baling press, bale chute and wire drawing stations are for sale, without wire. The plant will remain in operation until March 2026, when it will be replaced by a new press line. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 01/2023, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2023, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cjdpfexr Uuwox Aacshd FP 45 SMART. Cooling unit Thermo King SLX i 300-50, Diesel/Electric,. including installation and connection of th Container type double rear doors, 3 piece aluminium hinges on each door half; quick replacement doo Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm. Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock. Tyres - 6 x 385/65 R22.5. Internal length: 13311mm. Internal width: approx. 2490mm. Internal height: 2650mm. Total height (unl Pallet box for 36 Euro-pallets. Chassis MB 7350 NOVA GREY SDGL. Axles including hub RAL 9005 JET BLACK. Ventilation flap, at the front wall, at top of left side. Ventilation flap, at rear, left side at to spare wheel 385/65 R22.5.

Condition: used, Year of construction: 2009, operating hours: 5,023 h, load capacity: 1,600 kg, lifting height: 5,300 mm, free lift: 1,700 mm, fuel type: electric, mast type: triplex, construction height: 2,300 mm, fork length: 800 mm, drive type: Elektro, Reach truck Mast type: Triplex Transmission: 48 Volt AC Front tires type: Superelastic Rear tires type: Superelastic Battery voltage: 48V Battery capacity: 620Ah Battery manufacturer: Hawker Battery year: 2009 Seat cushion and display not OK; hole in drive motor cover; hole in plastic cover (top in ventilation); reach forks????; fork carriage rollers not OK; reach rollers (?) Tires need replacing - 05.09.25 sn 3rd valve, 4th valve, rear work light, full cabin, full free lift, Codpfxsukrk Te Aacshd

Condition: ready for operation (used), 🔧 Key Features Continuous Operation: Designed for uninterrupted processing, ensuring efficient separation of solids and liquids. High Separation Efficiency: Capable of achieving significant separation of solids, oil, and water, with capacities up to 30 m³/h, depending on the model. Robust Construction: Built with durable materials, such as 304 stainless steel for product contact parts, ensuring longevity and resistance to corrosion. Chsdpfxownx Ngs Aaced Advanced Control Systems: Equipped with PLC control panels featuring user-friendly interfaces for precise operation and monitoring.

Condition: used, Year of construction: 2011, total width: 2,400 mm, total length: 4,500 mm, total height: 2,200 mm, Empty weight: 3.000 kg Price: On request Chedpfx Aexrz Hmeacjd Including various accessories, replacement parts and spare parts - Year: 2011 - Documentation available: Yes - CE marking present: Yes - Serial number: 289.112 - Control type: Beckhoff - Travel X: 3000mm - Travel Y: 1500mm - Resonator type: Hypertherm Powermax 105 - Max. sheet thickness: 32mm - Power: 16.8kW - Transport dimensions: 4500mm x 2400mm x 2200mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Type: VCS 7034-5 Chjdpfoxufypox Aacjd Climate Test Chamber Water-Cooled Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3,000 W / at -20°C: 3,000 W Temperature calibration points: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Temperature deviation over time: ±0.1 to ±0.3 K Temperature deviation spatially: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Humidity deviation over time: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climatic calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width: 580 mm, Depth: 765 mm, Height: 750 mm External dimensions: Width: 870 mm, Depth: 1595 mm, Height: 1775 mm Feedthroughs: 1 x approx. 50 mm Ø, left side 2 x approx. 125 mm Ø, left side 1 x approx. 125 mm Ø, right side Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R404A / R-23 For your security as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: used, Year of construction: 2001, Ref:10930 . 2001 Schneider Senator 78 E-Line Guillotine 78cm guillotine in excellent condition Comprising: Stainless steel side tables left & right with air Stainless steel central air bed E-Line colour TFT display with graphic operator guidance Soft keypad programming with static back gauge Computer programme with 99 programmes, 999 cuts instructions Metric/Imperial measurement scale Motorised back gauge / fast and slow speed with micro-adjustment Variable pressure hydraulic clamp Optical cut-line indicator Overload protection circuit 10 beam light barrier with FFM guarding Cjdpfsv Dg Idjx Aacjhd 2 knives Tools and manuals. Specification: Cutting width, Max: 78 cm Clamp opening, Max: 11.5 cm Feed depth, Max: 78 cm Power required (main drive) : 1.9 kW

Condition: used, functionality: fully functional, mileage: 465,741 km, power: 331 kW (450.03 HP), first registration: 03/2021, fuel type: diesel, overall weight: 8,398 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, number of cylinders: 6, cubic capacity: 12,809 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Space Cab Wheelbase 3.80 m / rear overhang 0.99 m Chsdpfx Aoxr Diqoacjd Exhaust emission Euro 6 Engine MX-13, 355 kW/483 hp. Cab Badge: 480 Alternator 120 A, batteries 2x 230 Ah The battery energy monitoring system Automated gearbox, TraXon, 12 speeds MX Engine Brake Alu fuel tanks 845+430 l with step, height 620 mm AdBlue tank 90 litres on left-hand mudguard Driver comfort Automatic Cab Climate Control Window openers: electric Steering wheel, leather, colour black External sun visor green translucent Curtains along the windscreen and the side windows Driver seat: Luxury Air Co-driver seat: Comfort Air Arm rest driver seat Roof hatch glass, electric control Upper bunk Lower bunk with standard, foam mattress Water to air 3.8 kW auxiliary cab heater with residual heat pump and timer Refrigerator drawer 42 liters Storage below the lower bunk Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Ventilated disc brakes front and rear Electronic brake system ASR (anit-slip control) Max capacity fuel tanks Eco fuel: the speed control settings of a vehicle with Eco fuel focus on best fuel consumption Front: 8.00 t, parabolic, 163N Rear: 13.00 t, air suspension, SR1344 Front axle 1: 315/70R22.5 Rear axle 1: 315/70R22.5 Fifth wheel Jost JSK37C cast iron 150+12mm Safety Predictive Cruise Control lite Adaptive Cruise Control with FCW and AEBS Vehicle Stability Control (VSC) Lane Departure Warning System Axle load monitoring Technology Radio/USB player, 2 speakers Driver Performance Assistant Preparation for satellite communication equipment, consisting of a GPS/GSM antenna Universal FMS connector Exterior LED head lights LED daytime running lights Fog lights Adjustable roof air deflector for Space Cab Side collars Front mirror, heated, MirrorCam, MirrorCam switch, on bed Central door lock system, 2 keys, 2 RC units

Condition: used, Year of construction: 2015, through-put width 580 mm working heigth 580 mm air consumption 400 - 800 l/min working pressure 3,4 - 8,0 bar suction capacity 17,4 m³/h total power requirement 1,2 kW weight of the machine ca. 115 kg dimensions of the machine ca. 1225 x 935 x 1640 mm Csdpfx Asw Rrcwoacshd Description - Suitable for various blasting materials, e.g., quartz, glass beads, plastic beads, etc. - Ideal for cleaning, derusting, or paint removal from all types of metal parts , e.g., engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety during workpiece processing thanks to the viewing window with adhesive protective film - Dust-free working thanks to circumferential seals on the lid and door frame - Sturdy storage grid allows workpieces to be placed inside the cabin - With drain opening for changing the blasting material - Suction pipe for the blasting material attached to the bottom of the collection container - With compressed air connection on the outside - Glass bead blasting material, corundum blasting material, silicon carbide, plastic blasting material, etc. can be used Equipment details: - Very large front flap opening upwards with gas pressure springs for quick and easy loading and unloading - Integrated extraction system with replaceable air filter - Blasting gun without finger trigger – air flow controlled via foot pedal - Two fluorescent tubes (230 volts) in separate housing with protective screen and replaceable protective film, including five replacement films - Light switch with dual function: extraction and cabin lighting are switched on and off simultaneously - Working pressure regulated via pressure regulator with pressure gauge

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, Installed in 2015, only 250.000m² printed, excellent condition, fully refurbished including: -refurbished belt -vacuum table fully cleaned -Full cleaning in general -Ink circuit cleaned -UV led modules dismantled and fully cleaned internally -Carriage cleaning -All heads taken out, cleaned and replaced bad ones -Full printhead alignment, alignment to platen -Replacement of bearings on carriage -Reinstallation of the system with new hard disk Price includes decommissioning and loading on truck. Pictures and videos available. The EFI VUTEk GS3lx Pro LED printer, featuring UltraFX Technology, will help perfect your POP business. It’s designed for high production throughput, higher volumes, and shorter lead times while maintaining image quality. And you get the versatility to support the widest range of media and applications. fast 4 + white Csdpfx Aaov H Dyvecjhd In production Installation in Europe available upon request. Productivity • Express Mode – 3,400 ft2 (318 m2) per hour - Production up to 94 4 ft x 8 ft (1.2 m x 2.4 m) boards per hour • Production Mode – 2,300 ft2 (215 m2) per hour - Production up to 64 4 ft x 8 ft (1.2 m x 2.4 m) boards per hour For further technical information please refer to attached brochure

Condition: used, functionality: fully functional, mileage: 487,724 km, power: 331 kW (450.03 HP), first registration: 03/2021, fuel type: diesel, overall weight: 8,398 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, number of cylinders: 6, cubic capacity: 12,809 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Space Cab Wheelbase 3.80 m / rear overhang 0.99 m Exhaust emission Euro 6 Engine MX-13, 355 kW/483 hp. Cab Badge: 480 Alternator 120 A, batteries 2x 230 Ah The battery energy monitoring system Automated gearbox, TraXon, 12 speeds MX Engine Brake Cedpsxrrixjfx Aacshd Alu fuel tanks 845+430 l with step, height 620 mm AdBlue tank 90 litres on left-hand mudguard Driver comfort Automatic Cab Climate Control Window openers: electric Steering wheel, leather, colour black External sun visor green translucent Curtains along the windscreen and the side windows Driver seat: Luxury Air Co-driver seat: Comfort Air Arm rest driver seat Roof hatch glass, electric control Upper bunk Lower bunk with standard, foam mattress Water to air 3.8 kW auxiliary cab heater with residual heat pump and timer Refrigerator drawer 42 liters Storage below the lower bunk Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Ventilated disc brakes front and rear Electronic brake system ASR (anit-slip control) Max capacity fuel tanks Eco fuel: the speed control settings of a vehicle with Eco fuel focus on best fuel consumption Front: 8.00 t, parabolic, 163N Rear: 13.00 t, air suspension, SR1344 Front axle 1: 315/70R22.5 Rear axle 1: 315/70R22.5 Fifth wheel Jost JSK37C cast iron 150+12mm Safety Predictive Cruise Control lite Adaptive Cruise Control with FCW and AEBS Vehicle Stability Control (VSC) Lane Departure Warning System Axle load monitoring Technology Radio/USB player, 2 speakers Driver Performance Assistant Preparation for satellite communication equipment, consisting of a GPS/GSM antenna Universal FMS connector Exterior LED head lights LED daytime running lights Fog lights Adjustable roof air deflector for Space Cab Side collars Front mirror, heated, MirrorCam, MirrorCam switch, on bed Central door lock system, 2 keys, 2 RC units

Condition: used, Year of construction: 1994, weight max. in kg 1500 kg stroke 4500 mm fork length 1200 mm weight of the machine ca. 3150 kg dimensions of the machine ca. H 2850 mm Electric forklift truck Features: Cjdew H Dmuepfx Aacehd - Fork adjustment Battery replaced in 2018 Operating hours: 8340 hours

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 02/2023, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2023, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 45 SMART. Cooling unit Thermo King SLX i 300-50, Diesel/Electric,. including installation and connection of th Container type double rear doors, 3 piece aluminium hinges on each door half; quick replacement doo Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm. Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock. Tyres - 6 x 385/65 R22.5. Internal length: 13311mm. Internal width: approx. 2490mm. Internal height: 2650mm. Total height (unl Pallet box for 36 Euro-pallets. Chassis MB 7350 NOVA GREY SDGL. Axles including hub RAL 9005 JET BLACK. Csdpfx Aexrrhheacshd Ventilation flap, at the front wall, at top of left side. Ventilation flap, at rear, left side at to spare wheel 385/65 R22.5.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 04/2023, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2023, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 45 SMART. Cooling unit Thermo King SLX i 300-50, Diesel/Electric,. including installation and connection of th Container type double rear doors, 3 piece aluminium hinges on each door half; quick replacement doo Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm. Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock. Tyres - 6 x 385/65 R22.5. Chsdpoxrrdpjfx Aaced Internal length: 13311mm. Internal width: approx. 2490mm. Internal height: 2650mm. Total height (unl Pallet box for 36 Euro-pallets. Chassis MB 7350 NOVA GREY SDGL. Axles including hub RAL 9005 JET BLACK. Ventilation flap, at the front wall, at top of left side. Ventilation flap, at rear, left side at to spare wheel 385/65 R22.5.