Used Thermoplastic Granules for sale (778)

Condition: new, The Zerma ZCS shredder combines leading shredder and granulator technology in a single, compact unit. By developing the combination of shredder and granulator, ZERMA has successfully expanded its product portfolio. Through the interplay of the proven design and high torque of the single-shaft shredder with a highly efficient granulator, ZERMA is able to deliver a reliable and compact pre-shredding system. Bjdpfx Aloyr Tg Ts Aeln The shredder and granulator are driven separately, providing better process control throughout. To further improve efficiency, the ZERMA Smart Drive System is used to constantly monitor the load and adjust the current accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where consistent quality in shredding and granulating is required. Typical applications include, but are not limited to, the following: Injection molding Thermoforming Blow molding Recycling Extrusion Waste

Condition: new, Year of construction: 2024, Chopper knife 40 x 40 concave Knife for Weima, large size ... Bsdpfx Alebxu Dhs Asln Suitable for almost all common shredders/granulators Available from stock in Bitburg Subject to prior sale

Year of construction: 2017, condition: excellent (used), Included: screw conveyor; vibrating conveyor pipe with vibration motor drive. Bledpfx Aleinwfij Aen Total height: approx. 9250 mm Effective conveying height: 5800 mm Outer diameter: Ø 1200 mm Conveyor cross section: 300 x 100 mm Feeding height: approx. 1650 mm (machine) approx. 3100 mm (incl. support) discharge height: approx. 8900 mm (incl. support) number of spiral shelves: approx. 32 pieces heat exchanger surface: approx. 27,5 m² number of cooling/heating circuits: 32 pieces Material: stainless steel So far in use for conveying and cooling of granules and glass fibers (approx. 2.5 t/h) Free loading; Currently, the device can still be viewed built in operation.

Year of construction: 2019, condition: used, functionality: unexamined, Complete Avalon Sciences Geochain seismic acquisition set, including approx. 30 GSR-1 MKII Slim Seismic Receiver Tools with digital modules, recorders, power panels and surface support hardware. Only used a few times, in very good condition. Technical specifications: Approx. 30 × GSR-1 MKII Slim Seismic Receiver Tools with AS251 digital modules Multiple Inter-tool cables (ITC-4-40M) Blsdpfow R Tq Ajx Al Aen Telemetry adapter, formatter units, gamma-ray tool and crossover/adaptors GSP digital recorders (8 analogue channels) GPP Geochain Power Panels GPS timestamp kits Rack-mounted PCs with hot-swap drives and NAS storage Network and power infrastructure (switches, monitors, cabling) Packed in plastic and alloy cases Total weight approx. 1,450 kg Details: Used only a few times Complete and operational system Location: Warehouse Haaksbergen Condition: Used Documentation and packing lists available on request All information has been compiled with the utmost care, but no liability is accepted for possible errors or omissions.

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, As a dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine We also, of course, purchase well-maintained injection moulding machines manufactured from 2010 onwards We have been wholesalers of used injection moulding machines for over 25 years In light of recent developments – tax information and benefits for used machinery From 1 July 2025, used machinery will also be eligible for a special annual depreciation allowance of 30% for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine Keyword: Growth booster (Section 7(2) EStG-E) Currently in stock and tested at our Hanover warehouse Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP – thermoplastics Extras - 2 x core pull (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection capacity - Fast SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Start-up sequence - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on BWAP blow-out - 12 temperature control points - Potential-free contact BDE - Process monitoring - Cycle storage - Trend graph - Target/Actual graph - PV control - Active back pressure control - From first owner - Origin: Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit Clamping force: 2500 kN / 250 tonnes. Column spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Opening width: 820 mm Mould height: 330 mm min. Opening width max. 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max/26.3 kg Bledpjxqhuuofx Al Asn Injection unit Screw diameter: 50 mm Injection volume: 432 cc Shot weight: 393 g/PS Injection pressure: 2304 bar Electrical Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg. Dimensions: 5.7 x 2.3 x 2.3 m. Complete documentation, manual and software Available immediately from our warehouse in Hanover, Germany, or free delivery subject to reimbursement of freight costs The machine is offered with a functional test certificate The machine is our sole property The machine in question is available immediately from our warehouse in Hanover, is offered in a functionally tested condition and can be viewed whilst powered up. Information about the machines we offer and our company - We only sell machines purchased from current production from our warehouse in Hanover - All machines on offer are inspected and tested prior to dismantling - We do NOT sell goods from insolvency estates - We are NOT a broker dealing in third-party property. - All machines on offer come from successful companies for whom maintenance and upkeep are a matter of course - All machines on offer can be viewed at our warehouse

Condition: new, Year of construction: 2023, functionality: fully functional, space requirement width: 3,000 mm, space requirement length: 3,000 mm, space requirement height: 18,000 mm, Solex cooler conditioner dryer Bledpfx Alsxw D Nho Ajn Height: 18 meters, entirely made of stainless steel 316, designed for cooling, drying, and conditioning granules of food, fertilizer, or plastics. Capacity: 18 tons per hour.

Condition: new, functionality: fully functional, VFFS machine with volumetric cup filler for granules. PLC controlled, operation via touch screen, pneumatically driven cross sealing. Bodpfx Aov Hnzqol Ajln Technical data: bag size: L20-160mm & W~22.5mm; dosing range: 1-100g; max. speed of the machine in neutral: 50 cycles/minute; suitable film: laminated film, heat sealable; power supply: 220V, 50Hz; power consumption: 2kW; air pressure: max. 0.6MPa; compressed air consumption: 2m³/h; dimensions: ~ L800xW700xH1800mm; weight: ~ 280kg.

Condition: new, Year of construction: 2025, Complete vertical packaging system for dosing coffee beans AND ground coffee and packaging in coffee stand-up pouches with aroma valve. The system is equipped with two separate dosing systems (auger filler for powder, volumetric cup dosing unit for granules) and also has a Z-conveyor, screw conveyor, outfeed conveyor and an AMTEC PRO P60XL as VFFS packaging machine. A hot stamping printer for date, batch number (optional: thermal transfer printer on request), an anti-static module, stand-up pouch module (gusset device) and flat-bottom module (bottom seam is applied tightly to bottom, depending on the film material) are also part of the equipment. - Specifications VFFS: Stable film pulling by vacuum; MITSUBISHI/SIEMENS PLC, WEINVIEW touch screen operator interface; mark sensor registration control; quick change former assembly, pneumatic sealing unit; servo motor film pulling; bag size: L(100-380)xW(110-300)mm; max. speed of the machine in neutral: 60 cycles/minute; stainless steel; 220V/4.0kW; 6bar, 0.4m³/min; machine dimensions: L1600xW1260xH1680mm; weight: 600/700kg. - Specifications volumetric dosing unit: 4 cups; perfect for free flowing granulate like products (rice, salt, sugar, etc.); stainless steel; dosing range: 80-2.000ml; max. speed of the machine in neutral: 60 cycles/minute; - Specifications: stainless steel; filling system with rotating screw; Servo motor; filling weight: 10-2000g; 50 liter filling hopper; accuracy: 0.5-2%; max. speed of the machine in neutral: 60 cycles/minute; airproof; damp pressure, side opening hopper, including dust collector. Bedpfjv Nmh Uox Al Aoln Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Complete compact vertical packaging system including volumetric dosing unit, 1 cup, single bucket conveyor and outfeed conveyor. Suitable for granulate-type products such as sugar, rice, beans, nuts, etc. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German etc. ),date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air exhausting device, supporting device of finished bags, hole punching device, suitable for OPP and PE film (possibly additional costs for the PE unit). - Specifications of VFFS packaging machine: filling range: up to 5000ml; film width: max. 620mm; bag size (mm): min.-max. L(80-400)xW(180-300); max. speed of the machine in neutral: 45 cycles/min; stainless steel 304; 220V, 5kW; 6bar, 0.4m³/min; packaging machine dimensions LxWxH: approx. 1780x1850x1950mm; machine weight: 700kg. Capacity of dosing hopper is up to 50l. Single bucket conveyor has a material capacity up to 50l. The container is filled manually in the bottom position. In the top position it will be emptied automatically (complete cycle: 1 minute). - Specifications: height 3-5m; 220V, 1kW; stainless steel, dimensions: L1400xW700xH3500mm. Generally it has to be customized to meet individual customer/product requirements. Therefore deviations of shown specifications of modules are possible. The outfeed conveyor has a stainless steel 304 frame. - Specifications: conveying speed 30m/min; 220V, 0.55kW; conveyor dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Deviations possible. Total dimensions of complete system approximately L1780xW5100xH3500mm, depending on final layout. Generally the system has to be customized to meet individual customer/product requirements. Therefore deviations of shown specifications of modules and machines are possible. Main components: Color touchscreen SIEMENS, PLC controller SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, film pulling motor SIEMENS. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Bsdpfx Aev Nmkiel Aeln

Condition: new, Year of construction: 2025, Vertical packaging machine with volumetric cup filler for granules. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm; suitable film width: 240mm; suitable film: composite film, heat sealable; dosing range: 1-50g; max. speed of the machine in neutral: 60 cycles/minute; power supply: 220V, 50Hz; power consumption: 2kW; air pressure: max. 0.6MPa; compressed air consumption: 2m³/h; dimensions: L800xW960xH1900mm; weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Bodpfxjv Nniae Al Asln

Year of construction: 2025, condition: new, Vertical packaging machine with volumetric cup filler for granules. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: L(40-170)xW(20-110)mm; suitable film width: 220mm; suitable film: composite film, heat sealable; dosing range: 1-30g; max. speed of the machine in neutral: 50 cycles/minute; power supply: 220V, 50Hz; power consumption: 2,8kW; air pressure: max. 0.6MPa; compressed air consumption: 2m³/h; dimensions: L930xW750xH1920mm; weight: 350kg. Bedpfjv Nnitex Al Aoln Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, 4-lane VFFS for the packaging of granulates, powder or liquids in center sealed bags, optionally also for 3- and 4-side sealed bags (extra charge). Servo motors for fast film feed. Suitable for all sealable mono and composite films as well as laminated films. Further features: Touch screen operating monitor, automatic program setup, mark sensor, date/batch printer. - Specifications: max. machine cycle rate in idle mode: 4x60 cycles/minute (corresponds to max. 240 bags/min); bag sizes: L(50-250)xW(55-102)mm; film width: 520-900mm; power: 380V, 6,3kW; compressed air: 1,4m³/min, 6bar; machine dimensions: L1800xW1600xH1760mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Bsdpfx Aov Nmx Tol Asln

Condition: new, Year of construction: 2025, VFFS machine with 14-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). Equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; servo driven sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 14 heads; weighing range (single dump): 1~60g; volume per weighing head: 0.3L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications VFFS machine: max. speed of the machine in neutral: 85 cycles/min; bag sizes: L(40-250)xW(50-170)mm, (double film pulling possible for longer bags); suitable film width: 120-360mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 4.5kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.15m³/min; dimensions (LxWxH): 1400*1320*2040mm; weight: 590kg. Bjdpfx Aev Nm T Dsl Aeln Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, VFFS machine with 10-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 10 heads; weighing range (single dump): 2~200g; volume per weighing head: 0.5L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications VFFS machine: max. speed of the machine in neutral: 65 cycles/min; bag sizes: L(40-250)xW(50-170)mm, (double film pulling possible for longer bags); suitable film width: 120-360mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 3.7kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.5m³/min; dimensions (LxWxH): 1400*1320*2040mm; weight: 580kg. Bjdpfx Alov Nm T Rs Ajln Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Packaging system for dosing and filling granules into pre-made pouches and vacuuming of the pouch. Work steps: Removal of the bag, dosing of the granulate by means of a scale, forming the bag into a brick shape before filling, vacuuming and sealing of the bag. Suitable for granular materials such as coffee beans, cereals, rice, animal feed, seeds, beans, peanuts, salt, chemical fertilizer, etc. PLC controlled, operation via touch screen. Suitable for poly bags. - Specifications: filling range: 500-5000g; accuracy: = 5g; max. speed of the machine in neutral: 9 cycles/minute; power: 380V, total 5kW; compressed air: 0,85m³/min, 6-8bar; dimensions of the machine: L2260xW2925xH2500mm. Bedpfx Alov Nm Afs Aeln Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, VFFS machine with 10-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 10 heads; weighing range (single dump): 10-1500g; volume per weighing head: 2.5L; weighing accuracy: X(0.5); discharge flap: double flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications VFFS machine: max. speed of the machine in neutral: 60 cycles/min; bag sizes: L(40-300)xW(60-220)mm, (double film pulling possible for longer bags); suitable film width: 140-460mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 4.1kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.6m³/min; dimensions (LxWxH): 1780*1260*2480 mm; weight: 820kg. Bsdjv Nm Unepfx Al Aoln

Condition: new, Year of construction: 2025, VFFS machine with 14-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; servo driven sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 14 heads; weighing range (single dump): 10-1500g; volume per weighing head: 2.5L; weighing accuracy: X(0.5); discharge flap: double flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications VFFS machine: max. speed of the machine in neutral: 80 cycles/min; bag sizes: L(40-300)xW(60-220)mm, (double film pulling possible for longer bags); suitable film width: 140-460mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 4.9kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.2m³/min; dimensions (LxWxH): 1780*1260*2530mm; weight: 890kg. Bljdpfx Aljv Nm Uzs Aon

Condition: new, Year of construction: 2025, VFFS machine with integrated free-fall metal detector for checking vertically falling products and with 10-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 10 heads; weighing range (single dump): 2~200g; volume per weighing head: 0.5L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications free-fall metal detector: sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; tube diameter: according to the forming collar. - Specifications VFFS machine: max. speed of the machine in neutral: 65 cycles/min; bag sizes: L(40-300)xW(60-220)mm, (double film pulling possible for longer bags); suitable film width: 140-460mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; air pressure: 0.4-0.8MPa. Bedpfxsv Nnbis Al Asln Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, SAPI high-performance injector blasting cabinet type "T-Rex 140 Double-Power" with integrated cartridge filter system. Combines pressure blasting and injector blasting in one blasting system. A blasting cabinet for all applications! The "T-Rex 140 Double-Power" pressure/injector blasting cabinet can be used either in pressure blasting or injector blasting mode. This allows for even the most difficult blasting work to be carried out. The also integrated injector blasting mode can be used for lighter blasting tasks, saving on expensive compressed air. The blasting mode (pressure blasting or injector blasting) is easily selected using a selector switch on the cabinet base. The compact, combined pressure/injector blasting cabinet has an integrated cartridge filter extraction system. Thanks to the permanently installed filter system, the sandblasting cabinet requires little space and is easily transported using a pallet truck or forklift. The compact design of the blasting cabinet makes it ready for immediate use; all that's required is to connect the compressed air and power supplies and fill it with abrasive. The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber. At the same time, optimal abrasive cleaning is achieved, allowing the blasting material to be reused as often as possible. The use of state-of-the-art fan technology results in an extremely low power consumption (0.75 kW), making the injector blasting cabinet extremely economical. Our high-performance injector blasting head (fresh blasting head) creates a high negative pressure and thus achieves high blasting performance, enabling fast, economical work with the vacuum blasting cabinet. The blasting nozzle is made of boron carbide and achieves extremely long service life, even when using corundum blasting media. The pressure blasting head is also equipped with a boron carbide blasting nozzle for maximum service life. Bjdjupzmuepfx Al Asln A modern, energy-saving LED light is mounted on the cabin roof, protected from dust, to illuminate the blasting chamber. This ensures optimal illumination of the blasting chamber and enables fast, fatigue-free, and economical work. Our sandblasting cabinets are constructed from sturdy sheet steel, allowing for a high load-bearing capacity of the work grid. All SAPI blasting cabinets comply with all current safety standards and are equipped with a door safety switch that immediately stops the blasting process if the cabinet is opened during blasting. Metal blasting media, cast steel, steel grit, chilled cast iron, stainless steel blasting media, corundum, glass beads, plastic granules, vegetable granules, etc. can be used as blasting media.

Condition: used, Year of construction: 2010, 1. Edge banding machine Manufacturer: Homag Type: KAL 210 Ambition 2264 Year of manufacture: 2010 Technical data Release agent spraying system Joint milling unit (2 x 4 kW) Glue application A20 (granule/quick-melt system) Pressure zone with driven pressure rollers Miter saw HL84 (2 motors) Flush-/radius-/chamfer milling unit BF10/BF20 Corner copying unit FK11 (2 motors) Profile drawing blade PN10 Straight drawing blade for glue joint Buffing unit (polishing) Release agent and cleaning agent spraying system at the outfeed Note: Bljdpfx Ajzuyiljl Aen The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2012, condition: used, Technical details: Number of working hours: ca. 700 h Blsdju Nw Ebjpfx Al Ajn number: Rotormesserhalter: 5 number: Stattormesserhalter: 4 Rotor-Ø: 440 mm material: PET control voltage: 24 VDC kW Cutting mill (shredder) The plastic granulator is intended for industrial use. Application: Size reduction of all kinds of plastics, such as ABS, POM, PA6, PE, PP, PG and PET Plant consists of a granulator with belts and a bottle bunker. Material is fed into the bunker via feeding belt Hopper 20M2 V2A complete with gear motor 7,5 kW, The screw conveyor is activated by the control system of the granulator. Bucket volume approx. 20 m³, HxWxD: 4400x3300x3300mm, weight approx. 27,0 to, Bunker with discharge unit CentriCut 44SR granulator 55 kW, granulator 55 kW (50Hz, 400Volt) and feed screw 55 kW (50Hz, 400Volt) Grinding chamber: rotor knife length 272mm, weight approx. 2.0 to Conveyor belt NT9, belt length 3500mm, useful belt width 416mm, (guide profile height 60mm, driving bar height 60mm, driving bar distance approx. 500mm) total length 3550mm, total width 780mm, total height 2350mm, weight 250kg Sound insulation LxWxH: 2700x2300x2500mm, weight 1,3 to Tunnel detector 600 is integrated into the CentriCut cutting mill on the control side, scanning side 600mm, passage width 840mm, passage height 400mm, weight approx. 150kg The plant is ready for transport and for sale. i.D. *

Condition: excellent (used), Year of construction: 2011, KRAUSSMAFFEI KM 850-12000 MX injection molding machine Year of manufacture: 2011 Clamping force: 8,500 kN / 850 t Control system: MC5 Closing system: hydraulic-mechanical, twin-platen Robot: KraussMaffei LRX 500 Robot Z-axis: 4,000 mm Robot X-axis: 1,500 mm Robot Y-axis: 1,250 / 1,250 mm Closing unit: twin-platen hydraulic-mechanical system with 4 pressure pads and 4 locking units on the moving platen Mold closing force: 8,500 kN Mold opening force: 560 kN Dimensions of mounting platens (H × V): 1,600 × 1,600 mm Distance between columns (H × V): 1,140 × 1,140 mm Mold opening stroke: 1,600 mm Minimum mold height: 500 mm Maximum mold height: 1,100 mm Maximum clearance / opening width: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 / 100 kN Injection unit: 12000 Injection unit adjustment: PV Plasticizing system: complete system for processing thermoplastics Screw diameter: 135 mm Backflow valve: yes Nozzle: open Nozzle radius: 25 mm Nozzle orifice diameter: 9 mm Maximum injection pressure: 1,389 bar Injection volume: 8,588 cm³ Injection weight for PS: 6,098 g Injection rate: 1,414 cm³/s Rated power of pump motor: 132 kW Dry cycle time according to EUROMAP 6: 965 1/h Oil tank capacity: 2,440 l MC5 control system: color monitor, integrated control panel, USB port/data storage Bodpfez Eh U Usx Al Asln Net weight including control cabinet: approx. 49 t Machine dimensions / footprint (L × W × H): 11.72 × 2.92 × 2.71 m Additional equipment: KraussMaffei LRX 500 linear robot

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, For sale are 3 Erema regranulation systems. The nameplates and details can be seen in the photos. Inspections can be arranged by appointment. Bsdszx D U Hjpfx Al Aeln

Condition: used, Year of construction: 2006, RAPID GK6090-KU Plastic Granulator – 75 kW Industrial knife granulator manufactured by RAPID GRANULATOR AB, Sweden, in 2006. Equipped with a 75 kW main motor and a V-cut rotor with five rows of rotating knives arranged in a V configuration. Technical specifications: Manufacturer: RAPID GRANULATOR AB Model: GK6090-KU Year of manufacture: 2006 Serial number: 81725.001 Main motor power: 75 kW Rotor diameter: 600 mm Rotor width: 900 mm Cutting system: V-cut Rotating knives: 5 rows arranged in a V configuration Power supply: 400 V, three-phase, 50 Hz CE marking Bljdpfxjz Hmqkj Al Aon + includes Blower

Condition: refurbished (used), Year of construction: 2015, operating hours: 20,640 h, functionality: fully functional, overall weight: 24,500 kg, total width: 2,500 mm, Completely overhauled machine Blodoyu Undopfx Al Asn Single-shaft shredder, particularly suitable for secondary shredding and granulation of pre-shredded materials. Application: Commercial waste for thermal or material recycling, e.g., paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Komet 2200 HP, overhauled in March 2026 Year of manufacture: 2015 Control cabinet with ABB frequency converter, dust-tight with recooler Control panel: complete Drive motors: ABB 2x200 kW Paintwork new / RAL: 5003/7001 Rotor bearings/pull-off sleeve/shaft seals: new Hydraulic unit: complete Total weight approx. 24.5 t Dimensions (LxWxH) mm: 5800 x 2500 x 3100 mm Inspection and trial run/test run possible by appointment. Delivery time: immediate