Used Thermoplastic Granules for sale (777)

Year of construction: 2000, condition: ready for operation (used), A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On-site inspection is possible. Cedpevdu N Ajfx Al Aehc

Condition: new, machine/vehicle number: Baureihe GSL 180 / Neumaschine, The ZERMA beside-the-press granulators of the GSL series 180/120 to 180/430 have been designed as slow-running machines specifically for injection molding applications. They feature a rotor diameter of 180 mm and working widths from 120 to 430 mm. The rotor is driven directly by a geared motor. The special rotor knives can be resharpened multiple times. Material is fed via a noise-insulated, sandwich-construction feed hopper, which is available in various designs depending on the type of material handling. Depending on the application, the granulators of this series are mounted on either a low or high frame and equipped with an appropriate suction/extraction tray. Combined with a wide range of options, these granulators offer highly flexible use. Cjdsyr I Edjpfx Al Aehc In addition to the typical advantages of all slow-speed granulators, such as low noise emissions and virtually dust-free regrind, the granulators GSL 180/120 to GSL 180/430 are distinguished above all by their knife, rotor, quick-snap system, and excellent accessibility.

Condition: new, machine/vehicle number: Baureihe PM / Neumaschine, The impact disc mills (fine mills) of the PM series are high-speed centrifugal mills designed for the fine grinding of nearly all thermoplastic plastics. Typical applications include the fine pulverization of regrind material or virgin material from profile, pipe, or sheet extrusion. Additionally, these mills can be used in the food, chemical, and pharmaceutical industries. Cedpfsyr I Hhox Al Aohc The material is fed centrally through the stationary grinding disc with a dosing device. Fine grinding takes place between the rotating and stationary grinding discs. Discharge occurs via pneumatic extraction.

Condition: new, The solution for shredding large, long pipes and profiles. The ZRS series has been specifically developed for shredding pipes with diameters of up to 1,300 mm, made from various materials such as PE, PP, and PVC. These machines can shred plastic pipes up to 9 meters in length directly, without the need for prior cutting or sawing. The core components are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low rotational speeds. The pipe is loaded into an enclosed feed trough, where a hydraulic pusher presses it against the rotor. The pre-shredded material is then conveyed via a belt to a granulator, which processes it into granulate suitable for immediate use. Cjdpfxeyr Tg He Al Aehc The entire system is operated automatically via a central control unit. Additional advantages of the system include low energy consumption, the avoidance of power peaks, and reduced risk of accidents during pre-shredding.

Condition: not inspected (used), Year of construction: 2006, for coil and strip material from 0.4 - 15 mm max. panel thickness 60 mm max. edge overhang 66 mm large magazine table, D = 820 mm transport chain with automatic lubrication idler roller for shortest workpiece sequence safety/soundproof hoods central dust extraction connection, D = 160 mm, edge trimming units, D = 120 mm chip collection box, D = 100 mm equipped with: > Edge trimming units 1961 incl. DIA cutter > Memory-programmable screen control Edgecontrol > Automatic edge magazine 1901 for coil and strip material > Gluing station 1905 for cartridges + granules incl. sensing nozzle Chedpjy Ici Rjfx Al Aec > Pressing unit 1926, motor-driven/pneumatic > Cutting unit 1819, motor-driven > Flush trimming unit 1962 > Multi-function trimming unit 1966 with various radii/chamfers > Multi-radius draw blade unit 1965 with various radii > Corner copying unit 1983, R = 2 mm incl. one interchangeable motor, R = 1 mm > Straight draw blade 1964, controlled by program > Deburring unit 1944, controlled by immersion > Spray device 1856 at the infeed and outfeed > Belt bridge > stepless feed rate up to 24 m/min > Shear arm > motor-driven bridge adjustment > infeed guide rail, motor-driven adjustable Length 8200 mm Width 1300 mm Height 2000 mm Weight 3300 kg

Condition: new, machine/vehicle number: 13358, Rotor diameter: 400 mm Rotor width: 1000 mm Chedpfxoy E Alto Al Ajc Rotor knives: 3 x 2 Stator knives: 2 Feed opening approx. The compact inline granulators of the GST 400 series are primarily designed for use in blow molding applications to recycle bulky parts such as bottles, canisters, and crates, as well as blow molding and injection molding sprues. The low feed height allows for both manual loading and feeding of these parts via conveyor belt. The low noise level and small footprint make them the ideal solution for inline recycling applications.

Year of construction: 2015, condition: refurbished (used), functionality: fully functional, For sale: Codpfx Aezbkyvjl Ajhc Terex Finlay 883+ mobile screen. In brand new condition! This flat deck screen has been completely and professionally refurbished! All wear parts have been completely replaced = conveyor belts, bearings, hydraulics, etc. It has also been completely sandblasted and repainted in its original color. The machine/engine meter shows 4100 operating hours. Year of manufacture: 2015. WITH Spaleck screen box! Heavy-Duty Screen | Mobile Scalping Screener | Weight: 31 tons. Video is available. This machine can be used in various applications, but is mainly used in the recycling industry. This flat deck screen is designed to operate after a primary crusher or as a stand-alone screening machine and can be used in the following applications: quarry waste, construction and demolition waste, soil and aggregates. The key to its success is its flexible adaptability depending on the application or the type of industry. This Terex Finlay 883+ with Spaleck 3D combi-flip-flow screen box is designed for the most demanding recycling applications, ranging from scrap metal to biomass. The heart of the machine is the high-performance double-deck screen box from Spaleck. The stepped upper deck design in combination with the flip-flop mat system on the lower deck makes this machine unique in today's market. Due to the special construction, the material to be screened on the 3D upper deck is sufficiently turned and loosened. The advantage of this machine lies in the very fine screening of sticky materials such as concrete granules, coal, wet sand, etc. Even material flows with large pieces can be screened effectively with this type of screen deck.

Condition: good (used), Containers, granule containers, storage tanks, powder containers, paint powder containers, storage containers, silo systems, tanks, silos, polypropylene containers -Silo system: Granule container, polypropylene container with fill level indicator Cjdpfx Aleyv Au Ns Ashc -Capacity: approx. 550 liters -Container: Stainless steel -Dimensions: see photos / technical drawing -Dimensions: 1015/760/H975 mm -Weight: 84 kg

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 3,000 kg, rotor diameter: 400 mm, number of blades: 10, total length: 1,120 mm, total height: 1,950 mm, control cabinet length: 500 mm, control cabinet width: 300 mm, control cabinet height: 1,500 mm, total width: 1,210 mm, rotor width: 600 mm, power: 22 kW (29.91 HP), type of input current: three-phase, sieve perforation: 6 mm, warranty duration: 12 months, input voltage: 400 V, inner dimension width: 590 mm, opening width: 400 mm, Equipment: CE marking, ZERMA GS 400/600 – High-Performance Granulator | Precision. Performance. Reliability. Experience the new ZERMA GS 400/600 high-performance granulator in action. The GS series was developed for the highest demands in plastic recycling and combines maximum performance with exceptional reliability and easy maintenance. Highlights ✔️ Rotor diameter: 400 mm ✔️ Rotor width: 600 mm ✔️ Proven ZERMA V-Cut technology ✔️ 5-knife rotor ✔️ 3 stator knives ✔️ Robust steel construction ✔️ Intelligent drop-down cutting system ✔️ External knife adjustment ✔️ Robust bearing outside the cutting chamber ✔️ Optional bypass hopper for long profiles and pipes ✔️ Designed for continuous industrial operation Typical applications * Packaging tapes (at 8 mm, 600 kg/h) * Runners and injection molded parts + start-up lumps up to 1 kg * Plastic profiles * Pipes * Sheets * Films * Blow molded parts * Engineering plastics Cjdezmhgispfx Al Aohc * Production waste * Post-industrial recycling The GS 400/600 stands for precise shredding, high throughput, and long service life – the ideal solution for modern plastic processors and recycling companies.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, TECHNICAL DETAILS Maximum edge banding thickness: 12 mm Maximum panel thickness: 60 mm Maximum roller material thickness: 3 mm Minimum workpiece length: 140 mm Chedpfx Aljzktque Aec Minimum workpiece width: 50 mm Feed rate: 12 - 18 m/min Feed rate: Infinitely adjustable Height adjustment: motorized Gluing system: Granulate Glue reservoir: Top Cross-cutting unit: 2 motors Edge copying unit: 2 motors Flush/radius/chamfer stations: 1 Design: Left-hand machine MACHINE DETAILS Control system: BIESSE SMART TOUCH 23" Total power consumption: 13 kW Dimensions & Weight Machine length: 5,610 mm Weight: approx. 2,250 kg EQUIPMENT Belt overpressure Quick-change glue reservoir Suitable for PUR adhesives Strip magazine Spraying system Joint milling unit Preheating zone Pressure zone: NC-controlled Profile drawing blade, flat drawing blade Swivel unit Nesting equipment NC axis(es) Profile change: automatic Conformity marking: CE mark, EAC mark

Condition: new, Year of construction: 2026, functionality: fully functional, AM-20 Laboratory/Pilot Extruder with Wide-Slot/Film Die and Calender Unit Compact, vertical laboratory and pilot extruder AM-20 suitable for processing various plastics such as PP, PE, PS, ABS, PVC and other plastic granulates. The machine is equipped with a wide-slot die/film die, making it ideal for film extrusion, material testing, color and mixing trials, as well as development applications in laboratory and pilot plant environments. Additionally, calendering equipment is included, as shown in the photos. Technical data: • Model: AM-20 • Voltage: 110 V / 220 V • Input voltage: 2 x 220 V • Power: 1000 W • Screw diameter: 20 mm Codpfx Aoyyw T Uol Ashc • L/D ratio: 15:1 • Throughput: approx. 500–1000 g/h • Dimensions: 45 x 25 x 60 cm Suitable for: • Film extrusion • Laboratory and pilot-scale trials • Material development • Color and mixing tests

Year of construction: 1990, condition: used, Manufacturer : Clextral Model : BC 45 Year: 1990 Type: Twin-screw extruder Précédente application : Cuisson-Extrusion agroalimentaire DC motor: 21 kW Length of screw/barrel: 1500 mm Screw elements: nominal diameter 55 mm. L/D : 27 Included in the package: Granulator, water pump and control panel Chjdpfx Alsyzt Uds Ajc Peripheral equipment not included but available on request: Dosing unit. (Its integration may be subject to a feasibility study and a supplementary quotation.)

Condition: used, Year of construction: 1992, System for filling spacer frames with molecular granulate (diagonal filling) Width: 1300 mm Height: 3450 mm Depth: 1400 mm Weight: approx. 500 kg Chsdpfew Ivp Ajx Al Aec

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning Cjdorx S Ipspfx Al Aohc - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Twin-screw extruder Ref. No.: DE27678 Cjdpfet Eqvdex Al Ashc Manufacturer: Leistritz Type: ZSE 27 MAXX Year of manufacture: 2007 Screw diameter: 2 x Ø 27.0 mm L/D: 40D Drive: 33.6 kW Details: Co-rotating, segmented screws and barrels, 1 x atmospheric degassing, 1 x vacuum degassing including vacuum pump Options: Granulation, dosing, side feeder This offer doesn't meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry. We have the right solution for almost every budget.

Condition: good (used), Gluing unit, gluing section, gluing head, heating tank for edgebanders, edgebanding machine, melting unit with granule container -With the pre-melting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4electrically heated -Dimensions: 460/160/H340 mm -Weight: 19.5 kg Csdpfxsd Duvds Al Aehc

Condition: like new (used), functionality: fully functional, warranty duration: 12 months, filling weight (min.): 5 g, filling weight (max.): 5,000 g, Introducing the brand-new DLPACK 260 Servo! Built with stainless steel and equipped with Siemens controls, this machine delivers exceptional performance for a wide range of applications, from powders and granules to food and non-food products. The first 20 machines have already been built and commissioned, achieving an output of up to 105 bags per minute. With a dosing range of 5g to 5000g and bag sizes from 60–260 mm (W) × 80–500 mm (L), it is designed to handle almost any packaging requirement. Key Features: Brand: DLPACK Model: DLPACK 260 Servo Capacity: Up to 105 bags/min Dosing range: 5g – 5000g (via separate dosing) Chsdpfx Alsx Ag Ikj Aoc Bag format: 60–260 × 80–500 mm Construction: Stainless steel Control system: Siemens Warranty: 12 months Delivery time: 10 weeks Optional extras: Printer, labeler, weigher, screw dosing, and more – fully customizable for your application. Suitable for pillow bags and almost any product type. About DL Packaging DL Packaging specializes in modernizing and installing dosing systems, vertical form-fill-seal machines, cartoners, and end-of-line packers. Our “Second Life Packaging Solutions” are rebuilt to near-new standards and can be combined into fully automated lines – all from a single source. With over 30 years of experience, in-house dosing capabilities, comprehensive warranties, and tailored advice, our experts design the perfect machine or packaging line for your needs. Remote support, maintenance contracts, and a warehouse stocked with over 20,000 parts ensure your production keeps running smoothly. DL Packaging – your worldwide partner in retrofitted packaging solutions, based in Oosterhout and proud retrofit partner of the Rovema Group.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 67 h, clamping force: 1,600 kN, screw diameter: 45 mm, overall weight: 5,900 kg, controller manufacturer: ARBURG, controller model: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Cjdpfxox D E Dye Al Aohc Extra Information • Screw Diameter: 45 mm • Injection Pressure (Max.): 1580 bar • Shot Weight (Max. g PS): 232 g • Heating Output 9.7 kW | 5 zones • Net Machine Weight: 5900 kg

Year of construction: 2010, operating hours: 29,000 h, condition: excellent (used), Category: Twin-screw extruder Number: DE27699 Manufacturer: Coperion - Werner & Pfleiderer Type: ZSK 50 MCC+ Year: 2010 Screw diameter: 2 x Ø 50.0 mm L/D: 48:1 Cedpfx Aoxykcgol Ajhc Motor: 129 kW Details: Co-rotating, segmented screws and barrel, vacuum pump, temperature control unit, 2x side feeders, 1x side degassing The extruder is in very good condition and has only 29,000 operating hours. Options: 7-fold dosing system from Motan Colortronic, dryer (Motan LA 1200/4), IPS strand extraction, strand conveyor belt, water bath, granulator, vibrating screen. All options are available immediately at extra charge. This offer does not meet your requirements? Please visit our website Plama or send us your detailed enquiry. We offer suitable equipment for almost every budget.

Condition: used, Year of construction: 2004, Manufacturer: Gerteis Model: GMP-Polygran Macro Pactor 250/100/3 Year: 2004 Type: roller compactor, granulation unit for the pharmaceutical industry. Chsdpfxsx R Ar Rj Al Aec Feeding screw: 0.1–180 rpm Compaction screw: 1–460 rpm Compaction zone with pressure rollers: 1–30 rpm Granulation zone with star rotor and screen: 0–180 rpm Force: 1 – 20 KN/cm Gap width: 1.0 – 6.0 mm Pressure roller speed: 1 – 30 rpm Roller diameter: 250 mm Roller width: 100 mm Capacity: 60 – 400 Kg/H (normal value: 200 Kg/h) Equipment dismantled and stored. Full electrical and technical file + program backup available. Electrical, control, and safety cabinets are not available. These items can be quoted separately.

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: hand sensor Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct Cedpfx Aljx R Df Sj Aohc   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules   Manual electric screwdriver Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: good (used), container, granulate container, storage tank, powder container, color powder container -Container: Stainless steel container with castors -Capacity: approx. 540 liters -Number: 12x containers available -Price: per piece Cjdpfovpdnrsx Al Aohc -Dimensions: 1080/1000/H1110 mm -Weight: 105 kg/piece

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: SG10, PMH Filament strand pelletizer, Type SG10 compact machine with two drives for feeding and cutting rotor designed for one strand with max. 3.5 mm diameter The speeds of both drives are infinitely variable. Chedskyt T Sepfx Al Ajc This allows for a wide range of pellet lengths

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Csdpfx Aeiyyf Ijl Aohc Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Condition: used, Adhesive melter, gluing machine, hot glue machine, industrial hot glue gun, melting glue gun -sold as a source of spare parts -Connection: 220 volts -Machine: electrically heated -for granules -Propulsion via adjustable geared motor -Dimensions: 700/500/H1200 mm -Weight: 150 kg Chsdeb A Rf Sepfx Al Ajc