Used Tiger-Top for sale (8,557)

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 17370, functionality: fully functional, TIGER 352 SX EVO - SEMI-AUTOMATIC HIGH-CAPACITY > The robust cast iron frame absorbs vibrations and ensures consistent cutting quality as well as a longer service life for the saw blade. > The two-stage gearbox ensures high cutting performance and rigidity. > The pneumatic vertical vice ensures efficient and secure clamping, even when cutting pipes. > The control panel, equipped with a thermal relay and minimum voltage coil, guarantees the highest level of protection. In combination with an automatic pusher stop and label printing, the machine is the optimal solution for sawing your reinforcing steel in PVC window construction. The machine is still in use until June. It can be inspected at the customer's site in 49811. Kedpfx Adjy T Eh Toysnc

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Knedpfx Aozp E T Ssdysc Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Condition: used, Year of construction: 2015, - Feed rate: maximum 40 m/min - Motor power: 5.5 Kw - Working length: 7.35 meters Miter saw Manufacturer: Tigerstop Type: UKA 600 Year of manufacture: 2015 Tiger UKA 600 miter cutting system consisting of: Tiger Stop 7.5 automatic feed and stopper Overall length: 7.95 meters Working length: 7.35 meters Net working length (automatic saw): 6 meters Voltage: 220 volts 50 Hz Motor power: 0.45 Kw Feed rate: maximum 40 m/min (depending on the load) Accuracy: +/- 0.4 mm as a sliding guide. Infeed table for TigerStop 6.8 Overall length: 7.4 meters Table width: 325 mm Upward stroke miter saw model UKA 600 with pneumatic lift and clamping device Saw unit mounted on a rotary table with diameter: 980 mm Diameter of the saw blade: 600 mm Cutting capacity: 165 x 240 mm at 90 degrees Maximum cutting height: 165 mm at the fence and 175 mm diameter (at 90 degrees) for round material Cutting angle: 30 - 90 - 30 degrees 45 - 90 - 45 degrees with automatic function Motor power: 5.5 Kw Voltage: 400 volts 50 Hz Working height: 920 mm The machine is controlled by a push button for semi-automatic operation or fully automatically for 90-degree angles via the TigerStop. The rotary table is controlled by a Tigerstop servo drive TigerDrive. Outfeed/infeed table with side protection Length: 3.7 meters Width: 325 mm PC control with Beamworks program, computer with touch panel and computer cabinet. Cutting list download option for csv file. Extension with 6-strand flipper loading device For automatic loading of material with a length of 500 - 6000 mm. Shorter pieces can be placed directly on the infeed table. Loading device consisting of: 6 flipper beams with tables including the 2 aluminum profiles 80 x 40 mm per beam, the flippers, the connecting tube, 1 pneumatic cylinder with 24-volt valve. The net loading length is approximately 1.38 m. 1 additional support strand without flipper on the outside of the loader 2 extra cylinder set for the loading device Complete electrical control cabinet with PLC, power supply, Emergency stop safety relay, complete wiring etc. (Including additional electrical wiring for the safety fence door) Label printer package for Beamworks Safety fence on the back of the machine, only on the infeed side. Including entrance door with safety lock And additional protective device on the front to prevent intrusion between the loading strands. Product length measurement with sensor in the protective cover, controlled by the Tigerstop control. The length measurement and download with Tigerlink only work with 90-degree cuts. Knodpjzuyx Hofx Adyoc Tigerlink download software for downloading a csv file (cutting list). Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 05/22, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 45 mm, workpiece height (max.): 1,200 mm, number of slots in tool magazine: 12, actuation type: electric, Equipment: CE marking, documentation/manual, CNC MACHINING CENTER TOP PROXIMA – 6 SIDES, AUTOMATIC LOADING, DOWEL INSERTION, AND RETURN For sale: CNC machining center TOP PROXIMA, year 2022, designed for the automatic machining of furniture components and panels. Machine in very good condition, well-maintained, and currently installed in a production facility. It allows for drilling, milling, and automatic dowel/hardware insertion operations, with the possibility of machining the part on up to 6 sides. It features two independent work units, one for the main side and one for the back side, reducing handling and intermediate operations. Automatic loading and buffer stock. The machine incorporates an automatic loader that acts as a production buffer. Parts can be identified using a barcode reader/scanner, associating each part with its machining program. It can also be integrated into an automatic line, receiving parts directly from previous processes. Before machining, it incorporates an automatic system for checking and measuring part height. Main functions: Vertical and horizontal drilling. CNC milling. Machining of up to 6 sides. Front machining unit. Rear machining unit. Automatic tool change. Automatic dowel insertion. Dowel insertion on the X-axis. Automatic dowel feeding. The machine has various spindles, electro-spindles, and specific units for drilling, milling, and dowel insertion. Direct output or automatic return Once machined, the part can continue with direct output to the next process or automatically return to the beginning using the conveying system. The return system also incorporates a loader/accumulator, allowing for the storage of machined parts and functioning as an output buffer. The machine can operate independently or be integrated into an automated manufacturing line. Main data: Manufacturer: TOP Model: PROXIMA Year: 2022 Maximum part length: approx. 3,000 mm Processes: drilling, milling, and dowel insertion Machining: up to 6 sides Loading: automatic with storage/buffer Identification: barcode Part control: automatic height measurement Output: direct or automatic return Control: industrial CNC Safety: enclosed installation Condition: Machine in very good overall condition, well-maintained. Operating hours are not available on the control panel. Knedpoztkqdofx Adysc Availability: Availability to be confirmed. The machine is currently installed, and its removal will depend on the implementation of the new production line. Disassembly and loading: Disassembly, loading, and transport are not included. These tasks must be carried out by an external, specialized company at the buyer's expense.

Year of construction: 2018, condition: ready for operation (used), Work piece handling system manufactured in 2018. This TOP Automazioni Top Loader ETL 10-75 has a total weight of 2500 kg. If you are looking to get high-quality handling capabilities, consider the TOP Automazioni Top Loader ETL 10-75 machine we have for sale. Contact us for further details. Kjdpfsz Arkdsx Adyonc - Total Weight: 2500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Tigerstop Pro 6.8L automatic length stop Type: Pro 6.8L Year of manufacture: 2026 (new) Touchscreen operation Working length: 6,800 mm Kodszzmm Dspfx Adyenc The stop is mounted on a new, heavy-duty table. The first 2,400 mm section is a table without rollers, and the remaining 5,380 mm section is equipped with bearing-mounted steel rollers.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: PD 82 en Multi, Why choose the original Tiger Pile Driver? 1850 strikes per minute assembled in Western Europe drives piles up to 130mm Knedpezx Ul Ajfx Adyoc powered by a Honda 4-stroke engine one-person operation ergonomic and durable from €2190.00 excl. VAT The Tiger Multi can drive piles up to 130mm. Demonstration machines/used machines available! The Tiger pile driver runs entirely on gasoline and is easy to operate by one person. This makes the Tiger pile driver very mobile and user-friendly. Because the striking mechanism of the Tiger pile driver is made of double-hardened steel, the quality of this gasoline-powered pile driver is very high. It is an extremely powerful machine that is surprisingly lightweight, weighing only 18kg. The Tiger pile driver is powered by a Honda GX35 or GX50 four-stroke engine. This is the highest quality engine for this type of work. The engine is designed to tilt, allowing you to work effectively at any angle. The movement is achieved by air compression generated within the Tiger pile driver itself. This means that the Tiger pile driver does not require any other power source, such as hydraulics or a compressor, and cannot be overloaded. In addition, the Tiger pile driver is incredibly fast, delivering 1850 strikes per minute. To ensure comfortable operation, the Tiger pile driver has internally spring-dampened handles. The Tiger pile driver is designed to perform its job under the most extreme conditions without the need for additional machines or materials. The Tiger pile driver is suitable for both wooden, metal, and plastic piles. With this pile driver, the pile is immediately fixed in the ground, unlike setting it using a ground auger. A major user benefit of the Tiger pile driver is the fact that you can install all types of wooden, steel, and plastic piles up to a diameter of 105 mm. Even square piles of 7x7/8x8 and 9x9 can be installed in this way. The Tiger pile driver was designed with the help of people with more than 20 years of practical experience in driving piles for fencing. The key words here were: fast, lightweight, reliable, and user-friendly. The Tiger pile driver has more than succeeded in these areas. After testing more than 20,000 piles, the Tiger pile driver has proven to be extremely reliable. The assembly in the Netherlands of high-quality components and the drive from a Honda GX35 or GX50 engine ensures a quality product for the professional user. With 3 mobile dealers throughout the country, a rapidly growing network of permanent dealers, and several rental/loan machines in stock.

Year of construction: 2019, condition: like new (used), 2 Quantity Antares Vision Matrix Stations - Top View Standalone module for off-line semi-automatic carton/bottle-to-case or bundle-to-case aggregation The Matrix Station Top View is a standalone aggregation module for off-line manual packaging operations. It is designed to allow Pharma Industries to establish a reliable and consistent hierarchical relationship “parent-child” throughout the composition of packaging from lower level to higher one, such as folding box/bottle to case or bundle to case. The operator inserts the individual packaging into the shipping carton layer by layer. Each completed level is photographed from above by a high resolution auto-focus camera through an automatic trigger. Dedicated software monitors the progress and when the number of units and layers is reached, a label is generated. The Matrix Top View is also able to handle higher aggregation levels, boxes on pallets. Aggregation station designed to maximize productivity in the manual packaging operations. Kedpsyb Tw Rjfx Adyonc Performs multiple reading from the top of the Datamatrix codes on cartons or bottles when fit into a case, managed as units or as aggregated bundles. The vision head is equipped with camera system and integrated LED lighting to read each layer of cartons during case composition. AUTOMATIC FOCUS ADJUSTMENT FOR EACH CASE LAYER READING MULTIPLE READING WINDOW (mm): 600×420 ERGONOMIC DESIGN OPTION: TRANSPORTABLE ON WHEELS

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 2507, Used CNC bed milling machine / traveling column milling machine with automatic tool changer and swivel head. Manufacturer: TIGER S.p.A. (Italy) Type: TFA 5 RT Year of manufacture: 2002 Serial number: 2507 The "RT" designation at Tiger indicates a version with a rotary table or 5-axis machining capability. Heidenhain CNC control (probably TNC 426 or TNC 430) Automatic tool changer Tool magazine Tiger TFA 5 RT ISO 50 tool holder Swivel milling head Bed-type machine with a large working area Full enclosure Tool changer Weight 650 kg Connection 400 V / 50 Hz Power output 45 kW Maximum current 80 A Technical data X-axis travel 2,500 mm Y-axis travel 1,200 mm Z-axis travel 1,200 mm Table size 1,000 x 1000 mm Tool holder ISO 50 Spindle speed 2,500 rpm Main drive 45 kW Number of tool positions 60 Machine weight 12,000 kg Kjdpfezffnuox Adysnc

Condition: used, Weighing station for the food industry The Top Control scale is a professional weighing solution for applications within the food industry. It consists of a colour touchscreen indicator on a stainless steel frame with a weighing platform and product tray. Thanks to its robust construction and user-friendly operation, this machine is suitable for a variety of weighing and packaging processes. Located in Emmeloord, the Netherlands. Immediately available, price on request. Kedpoz Ndg Usfx Adysnc More photos and full specifications: / Type: Weighing scale / weighing station Indicator: Top Control colour touchscreen Construction: Stainless steel frame with weighing platform and product tray

Year of construction: 2020, condition: used, Bar length: 3000mm, max. bar diameter: 80mm, operating cycle: fully automatic, monitoring and fault diagnostics: via display, part length: presettable, feed control: AC servo motor, bar diameter: adjustable via PLC keypad in 1mm increments, remnant extraction: to the rear or ejection to the front, guide channels: Vulkollan plastic, usable magazine width: approx. 900mm, control: integrated PLC, weight: approx. 2500kg. Documentation available. An on-site inspection is possible. Knsdpfxszzdyho Adysc

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00041790, The full description can be found in the two attached documents. The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. Knsdpfeykq T Ujx Adyec The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: - Production progress - Production times - Weighing statuses - Preparation times - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00040812, The full description can be found in the two attached documents. The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. Knodpfx Aoykq D Hjdyjc The system offers numerous functions and statistics, including: - Production progress - Production times - Weighing statuses - Preparation times - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063530, Technical Characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz Kodpfjxx R Nqex Adyenc - Weight: 1200 kg Design & Features - Guide Channel: Manually interchangeable, made of Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Offers rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system allows axial or radial displacement up to 600 mm for lathe servicing. - Automation: Fully PLC controlled with brushless motor and digital pneumatic valves for speed and thrust regulation. - Bar Storage: Single-level magazine with a 235 mm load capacity. Bar Feeder: TOP Automazione Model: FU 352 - Dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI digital controller for manual operations. Machine Status: WORKING - Set of guide channels and accessories for bar clamping worn - Set of bearings for pusher head worn

Condition: used, Used APV Rannie Blue Top 30/60 Homogenizer – Stainless Steel – 2-Stage High-quality APV Rannie “Blue Top” homogenizer, model 30/60, designed for reliable and efficient homogenization in dairy and food processing applications. This unit features a 2-stage homogenizing system, ensuring optimal particle size reduction and stable product consistency. The robust stainless steel construction makes it ideal for hygienic production environments. Technical details: Manufacturer: APV Rannie Model: Blue Top 30/60 Configuration: 2-stage homogenizing valve Motor power: 15 / 18 kW Plunger diameter: 30 mm Connections: approx. 1" – 1.5" Material: Stainless steel Performance: Estimated capacity: approx. 1,500 – 2,000 L/h Working pressure: up to approx. 150–250 bar Knedpfx Adsz Szaxeyoc (depending on product and operating conditions) Model: Blue Top 30/60 Configuration: 2-stage homogenizing valve Motor power: 15 / 18 kW Plunger diameter: 30 mm Connections: approx. 1" – 1.5" Material: Stainless steel Manufacturer: APV Rannie

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, total height: 1,900 mm, total width: 2,400 mm, total length: 6,000 mm, type of input current: AC, overall weight: 500 kg, input voltage: 220 V, machine base height: 900 mm, operating pressure: 9 bar, year of last overhaul: 2027, control voltage: 220 V, input current: 16 A, input frequency: 50 Hz, inner diameter: 610 mm, space requirement length: 6,000 mm, space requirement height: 2,000 mm, space requirement width: 3,000 mm, We offer this ready for use The Raw Juice Company TOP-21 Bottle Filling Machine 100ml - 3000ml, year of construction 2022. Manufacturer: The Raw Juice Company Model: TOP-21 Year of construction: 2022 year Condition: ready for use / Currently in use Category ID: 310 Type ID: 1066 Machine type: Bottle Filling Machine 60ml - 3000ml Knjdpfx Adjz D Uuxjysc This versatile filling machine is currently being used for filling bottle sizes from 60ml - 2000ml. It is a fully automatic line, run by 1 person. Put the bottles on the line, it will fill them (4 bottles at a time) with a 4 headed diving nozzle (to avoid foaming), then moving the bottles along to a cap placer and finally a to a cap tightener. The cap tightener is set up for a 38mm cap (this can be changed). This line has been regularly maintained by our in house service team and is in perfect working order. Capable of filling from 500 - 2000 bottles P/Hour If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2009, HERMA provides specialized automated and semi-automated labeling systems designed for boxes, cartons, and packaging lines, built around the HERMA 500 High-Performance Labeler. [[1](/), [2](/)] Ksdpfxsz Rvb Ie Adysnc Key Box and Carton Labeling Solutions - Print & Apply Systems: Integrates a label printer and applicator unit to print variable data (such as shipping labels, barcodes, or tracking info) in real-time right before dispensing onto boxes. - Tamper-Evident Seal Labelers (e.g., HERMA 362E TE): Designed for sealing rectangular, dimensionally stable folding boxes and cartons with L-shaped or C-shaped security labels, achieving speeds up to 200 products per minute. - Top and Bottom Labelers (e.g., HERMA 652C): Compact, space-saving systems equipped with dual HERMA 500 applicators to apply labels simultaneously or sequentially to the top and bottom of packages at speeds up to 250 products per minute. - Two-Side Labelers (Series 362 - E, C, M, and TE variants): Provides accurate side or corner labeling for primary and secondary carton packaging, featuring synchronous centering devices and quick, tool-free format adjustments. Core Features - Modular Architecture: Built with standardized components allowing easy integration of thermal inkjet or thermal transfer printers, vision inspection systems, and automated rejection units. - High Precision & Speed: Powered by the HERMA 500 applicator series for high-cycle rates and stable label positioning. - Connectivity & Control: Features touch-screen operation, PLC/Ethernet interfacing, and automatic line-speed synchronization Type: Labeller for Boxer, top Jars, Bottles, Small Boxes, etc

Year of construction: 2024, operating hours: 10 h, condition: excellent (used), functionality: fully functional, load capacity: 3,000 kg, machine/vehicle number: 0000, Aluminum crossbeam ATV-Q with 4 swivel lifting hooks, adjustable - The lightweight H-shaped crossbeam made of aluminum has a load capacity of 3,000 [kg]. Type ATV-Q-3-3x3, brand Tiger Hebezeuge. The crossbeam has been used only a few times and a maximum of 500 kg has been lifted with it. It shows only minimal signs of wear. See photos. Purchased in June 2024. The new price is €6,100.00 plus 19% VAT and shipping costs (approx. €380). Selling because it is no longer needed. Please contact me if you have any questions. Knedpfx Aszn Raujdyjc Description according to the manufacturer: Aluminum crossbeam with 4 swivel lifting hooks - H-shaped crossbeams made of aluminum. Product features: Type: ATV-Q-3-3x3 Load capacity: 3,000 [kg] Hook spacing: 420-3,000 [mm] Hook spacing, cross profile: 400-3,000 [mm] Aluminum load beam for crane operation Lightweight crane crossbeam in H-shape made of aluminum Suspension for single hooks, DIN 15401 With four adjustable safety lifting hooks (rotatable by 360° under load) With a quick-release system to quickly adjust the lifting hooks a) on the main profile in a grid of 50 mm b) on the cross profile in a grid of 50 mm All parts are made of either aluminum or polyamide (with the exception of the bolts and suspension hooks) The two cross profiles can be removed from the main profile Surface: plain Product description: Aluminum crossbeam ATV-Q with 4 swivel lifting hooks, adjustable - The lightweight H-shaped crossbeam made of aluminum. This aluminum crossbeam in H-shape consists of a main beam and 2 cross beams. The crane crossbeam can not only be adjusted in many ways but also easily disassembled. This simplifies transport and saves space if the crossbeam is not needed. The load-bearing devices have a type plate with manufacturer, load capacity, weight and type number, as well as a QR code with access to the EC declaration of conformity. Safety note: Note on the safe storage of crossbeams According to DGUV rule 109-017, chapter 7.5, load-bearing devices must be placed or laid down in such a way that they cannot tip over, fall or slide off.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063528, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max. Feed Speed: 30 m/min - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Bar feeder details: TOP Automazione model: FU 352 Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Knodpfx Aoxx Si Ejdyjc Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: - Digital HMI controller for manual operations Machine status: - In working condition

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: BM17115077, 🔧 Automatic Bar Feeder – Top Automazioni MA315SX For sale is a fully functional automatic bar feeder from Top Automazioni (Italy), designed for use with CNC lathes. 🏭 Manufacturer: Top Automazioni 📌 Model: MA315SX 📅 Year of manufacture: 2018 🔢 Serial number: BM17115077 ⚖️ Weight: approx. 500 kg ✅ CE compliant ⚙️ Technical Specifications • Suited for bar material up to 3 meters in length • For bar diameters up to Ø 12 mm • Automatic and stable material feeding for serial production • Robust and proven construction by Top Automazioni 🔌 Machine Integration Kedpfxjx Hgpfe Adysnc • The bar feeder was previously connected to a Tsugami CNC sliding headstock lathe • Machine interface and operation were fully functional up to removal ⚡ Electrical Data • Supply voltage: AC 230 V • Frequency: 50 / 60 Hz • Rated current: 7.8 A 🛠️ Condition • Used • Technically flawless / fully functional • Normal wear according to age and prior use 📍 Location • Stuttgart area, Germany 📦 Scope of Delivery • Bar feeder as illustrated • Sold as-is Inspection is possible by arrangement. Further technical information or customized options can be discussed upon serious inquiry.

Year of construction: 2006, condition: ready for operation (used), TETRA PAK ESL GABLE TOP FILLING MACHINE FOR 1000/500/300 ml WITH TWIST CAP APPLICATOR Ksdpfsz E U Dvsx Adyjnc TETRA REX TR22 FILLER YOM 2006 ESL UNIT INCLUDED CAPACITY 2800 CARTONS PER HOUR 13.300 RUNNING HOURS EXCELLENT TECHNICAL CONDITION

Condition: like new (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: DN1792, Tiger Lifting Equipment – Kurschildgen GmbH, Lifting Equipment Manufacturing Knjdpfx Adozv E Ddjyjc Spindle gripper, gripper with handwheel and positively locking gripping arms for lifting a hexagonal contour using a crane. Load capacity: 400 [kg] Type: ST-SU-040-600_6KT-06357 Gripping width: 600 [mm] Gripping breadth: 180 [mm] Payload: 400 kg Weight: 75 kg 6 units available!!! Like-new condition with minor signs of use, see images. Item location is 75053 Gondelsheim. See images. Shipping via freight forwarder or collection by appointment only.

Condition: used, Year of construction: 2002, Tiger TFA 5 RT CNC Bed Milling Machine Manufacturer: Tiger S.p.A. (Italy) Model: TFA 5 RT Machine Type: CNC Bed Milling Machine with Rotary Table Year of Manufacture: 2002 Serial Number: 4211 Order No.: 2507 Working Area X-axis travel: 1,500 mm Y-axis travel: 800 mm Z-axis travel: 1,300 mm Rotary Table Table size: 1,020 × 1,200 mm T-slot width: 22 mm (H7 reference slot) Number of T-slots: 7 T-slot spacing: 140 mm Maximum table load: 5,500 kg Feed Rates Working feed: 0–4,000 mm/min Rapid traverse: 12,000 mm/min Axis Drive Torque X-axis: 18–33 Nm Y-axis: 14 Nm Z-axis: 27–33 Nm Spindle Spindle taper: ISO 50 Tool clamping force: 15,000 N Spindle motor power: 20 kW Maximum spindle speed: 2,500 rpm Number of speed ranges: 2 Spindle Speed Ranges Kedpfxozqcy Sj Adyjnc Constant torque Range I: 10–272 rpm Range II: 10–658 rpm Constant power Range I: 272–518 rpm Range II: 658–2,500 rpm Accuracy Ballscrew precision class: IT5 (ISO 3408/3) Electrical Specifications Supply voltage: 400 V Power supply: 3-phase Frequency: 50 Hz Installed power: 30 kW Maximum installed power (nameplate): 50 kW Rated current: 40 A Maximum current: 80 A Control voltage: 24 V DC Auxiliary voltage: 220 V Electrical protection: IP54 Motor protection: IP54 Pneumatics Air consumption (6 bar): 600 Nl/min General Machine weight: 12,000 kg Documentation reference weight: 12,500 kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034613, Technical characteristics: Knodpfoxx Sclox Adysc Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max. Feed Speed: 30 m/min - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Bar feeder details: TOP Automazione model: FU 352 Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: - Digital HMI controller for manual operations Machine status: - In working condition

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034612, Technical characteristics: Core Specifications Bar Diameter (Round): 6 mm – 50 mm Bar Diameter (Hexagonal): 6 mm – 45 mm Bar Diameter (Square): 6 mm – 37 mm Bar Length Options: 1200 mm – 3200 mm Maximum Feed Speed: 30 m/min Maximum Remnant Length: 300 mm Required Air Pressure: 6.5 – 7.5 bar Operating Voltage: 230V / 50 Hz Weight: 1200 kg Design & Features Guide Channel: Manually interchangeable, made of Vulkollan-type plastic, suitable for high-speed bar rotation. Front Steady Block: Interchangeable every 5 mm for optimal bar support. Remnant Management: Rear extraction via self-centering extractor or front ejection available. Repositioning System: An optional rail system enables axial or radial displacement up to 600 mm for lathe servicing. Automation: Fully PLC-controlled, equipped with a brushless motor and digital pneumatic valves for speed and thrust control. Bar Storage: Single-level magazine with a 235 mm loading capacity. Bar Feeder: TOP Automazione Model FU 352 SX SEMI-AUTOMATIC BAR FEEDER FOR HORIZONTAL LOADING TO LATHE (AUTONOMY DEPENDS ON BAR DIAMETER) Dimensions Bar Feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: Knsdpfoxx Sfaex Adyjc DIGITAL HMI CONTROLLER FOR MANUAL OPERATIONS Machine Status: OPERATING