Used Tilting Spindle Moulder for sale (15,926)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x900x1370 mm Weight 530 kg Todpfjv A Hifjx Anleb Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1750x1300x1150 mm Weight 600 kg Tsdpjv A Hh Ujfx Anlob Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x900x1370 mm Tsdpfxov A Hh Ij Anlsb Weight 530 kg Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x900x1370 mm Weight 530 kg Total power requirement 5,5 kw Tsdpfx Anev A Hirelsb

Condition: new, Table dimensions 1.200 x 780 mm Motor output 7,5 kW Spindle diameter 30 mm Tjdpfxexyafqs Anlob

Condition: used, used, good conditionMake FrommiaType 705 P1MachineNo. 119mobiletiltable from 0 to 45°motor 2 speeds/polarity reversible6 speed levels 2500/4500/5000/6000/9000/12,000 rpmright-left rotationtable size 1000 x 900 mmmilling arbor diameter 30 mmmilling fence with fine adjustmentsuction connection D 120 mmspace requirement approx. 1000 mm x 900 m x 1200 mmWeight approx. 400 kgStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in as-is condition as inspectedwithout guarantee and warranty Tedpfx Asvxr Rtenljb

Condition: used, used, good condition, low operating hours Machine thoroughly cleaned, lubricated Test run performed Tsdpfx Aneycxg Hjlsb Spindle runout measured max. 0.1 mm Manufacturer: Bäuerle Model: SFM 2 Machine no.: B1533 tilt range from -5° to +45° mechanical brake 6 speed levels: 2800/4500/5600/9000/6000/12000 rpm forward/reverse rotation Table size: 1100 mm x 900 mm spindle diameter: 30 mm cast iron fence jaws milling fence with fine adjustment extraction port D 120 mm required space approx. 1100 x 1100 x 1200 mm weight approx. 1000 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-is condition as inspected, without guarantee or warranty

Condition: used, Used, excellent condition, including milling fence. Milling fence with fine adjustment, central adjustment via rack and pinion. Machine fully cleaned and lubricated, partially overhauled. Various parts replaced. Star-delta switch overhauled. Foot brake adjusted. Fence jaws replaced. Spindle runout checked: precise, only 0.01 mm tolerance. Brand: Bäuerle Model: SFM 2 Machine No.: 8719 Tjdeyt R Nuopfx Anleb Tilting range: 0 to 45° Brake Motor with 2 speeds/pole changeable 6 speed levels: 1,800 / 4,500 / 5,600 / 6,000 / 9,000 / 12,000 rpm Reversible direction of rotation Table size: 1150 x 1200 mm Spindle diameter: 30 mm Milling fence Required space: approx. 1200 x 1200 x 1300 mm Weight: approx. 1,000 kg Location: 97447 Gerolzhofen, loaded free of charge, unpacked Sold as seen, function tested. No overhaul, no warranty or guarantee.

Condition: used, Year of construction: 1996, Used, excellent condition Partially overhauled, new switches Spindle run-out 0.03 mm Motor newly mounted and rewound Make: Lazzari Model: Base 45 Year of manufacture: 1996 Machine-No.: 9601076 CE type-tested Motor power: 4.0 kW Tiltable 45° Automatic brake 5 speed settings: 3 / 4.5 / 6 / 8 / 10,000 rpm Forward/reverse operation Table size: 1100 x 700 mm Spindle shaft diameter: 30 mm Control panel on top Extraction port: diameter 120 / 120 mm Space requirement: approx. 1100 x 1200 x 1400 mm Tedpfxey Ay Dns Anleb Weight: approx. 490 kg Total connected load: 4 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current as-inspected condition, without warranty or guarantee.

Condition: used, Year of construction: 1994, Used, excellent condition, top specification, extensive accessories with 3-axis control, pneumatic spindle change, electronic adjustment of the milling fence 99 memory programs, 15 change spindles, adjustable table insert Manufacturer: SCM Model: T150 Class Year of manufacture: 1994 Upgraded motor: 6 / 7.5 kW tilt range from -10° to +45° motor brake motor with 2 speeds, pole-changeable speed settings: 3250/5000/6500/10,000 rpm right and left rotation Table size: 2700 x 700 mm Milling spindle diameter: 15 x 30 mm / 1 x 40 mm Milling spindle clamping: HSK Quick-change spindle system: SK / HSK Table extension: 2 x 650 mm Extendable frame support Aluminium fence jaws Milling fence with fine adjustment Digital displays for milling fence – diameter – depth of cut – jaw offset Guard and pressure device Top control panel Swiveling control panel - electric height adjustment - electric tilt adjustment - electric milling fence Positioning control for 3 axes: height/tilt/milling fence with 99 programs Digital displays for tilt angle – spindle height – fence depth Swivel-away fence device Tedpfx Asythdvsnleb Socket for feed unit Original price approx. 40,000 – 45,000 EUR Extraction connection 120 x 120 mm Space requirement approx. 2700 x 1300 x 1800 mm Weight approx. 1073 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handover in the current condition as inspected, function tested, without overhaul, without warranty or guarantee.

Condition: excellent (used), Industrial MXS5115A vertical spindle moulder / woodworking router table, suitable for professional woodworking shops. Ideal for profiling, grooving, edge shaping and custom milling operations on solid wood and wood-based panels. Specifications • Model: MXS5115A • Table size: 650 × 580 mm • Maximum working thickness: 120 mm • Spindle speed: 18,000 rpm • Collet sizes: 6.3 mm / 12.7 mm • Motor power: 2.2 kW • Power supply: 380 V, 3-phase Features • Heavy-duty cast iron work table • High-speed spindle for precise routing and profiling • Industrial construction • Suitable for furniture production, cabinet making and joinery • Easy adjustment and operation Condition • Good working condition. • Ready for use. • Inspection and testing are welcome. Todpfx Aszmukusnleb

Condition: used, Year of construction: 1999, total length: 1,000 mm, total width: 2,040 mm, total height: 1,710 mm, Colour: Grey Empty weight: 900 kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 126-02049 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 1990 - Max. tool diameter milling head [mm]: 180 - Feeding device present: Yes - Brand: Holz-her - Number of wheels [pcs]: 3 - Number of speeds: 2 Tedewnigcopfx Anleb - Voltage [V]: 380 - Current consumption [A]: 12 - Power [kW]: 6.2 - Transport dimensions: 1000mm x 2040mm x 1710mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total length: 1,150 mm, total width: 900 mm, total height: 1,800 mm, Colour: Green Empty weight: 400 kg - Documentation available: No - CE certificate present: No - Spindle diameter [mm]: 25 - Table length [mm]: 1150 - Table width [mm]: 900 - Tiltable spindle: Manual - └ Min. tiltability [°]: 0 - └ Max. tiltability [°]: 45 - Feeding device present: Yes - Brand: Holz-her Tsdpfx Aoy Nc Aasnlsb - Number of wheels [pcs]: 3 - Tool key included: Yes - Tools (milling heads) included: Yes - Spindle speed: Manual - Min. spindle speed [rpm]: 1400 - Max. spindle speed [rpm]: 1200 - Voltage [V]: 400 - Fuse [A]: 32 - Transport dimensions: 1150mm x 900mm x 1800mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), Year of construction: 2025, minimax ti 55es LL – Table saw The illustration shows the T 55 i elite s in its standard version. The professional machine for skilled tradespeople, featuring a pivoting milling spindle and 4 speeds. M Digital: motor-driven height adjustment and pivoting. Sturdy steel and cast iron construction. Oversized milling unit made of cast iron, pivoting up to -45° to the rear. LED display of milling speeds. Fast, trouble-free speed change via eccentric clamping. Tedpfjdqzh Rex Anljb Clockwise/counterclockwise rotation. Display of height and inclination with 1/10 mm accuracy. Heavy-duty professional fence: with fine adjustment via rack and pinion, with numerical display, aluminum fence cheeks, 3-way positioning for quick repetition of the setting. Scope of delivery: Aluminum fence cheeks Arched milling guard Table extension on the left and right Model: minimax ti 55es LL Article no.: 5502252 Technical data Dimensions of the work table: 2500 x 655 mm Dimensions of the format sliding table Usable length of the spindle: 125 mm Max. tool diameter: 240 mm Max. tool diameter (lowered): 230 mm Max. tool diameter (dovetail cutter): 320 mm Spindle inclination: 0 to -45 degrees Speeds: 3500/6000/8000/10000 min-1 Motor power 400 V/ 50 Hz / S6-40%: 5.0 kW Dust extraction port diameter: 2 x 120 mm

Condition: used, Used Machine Tsdpfx Anjzlbqxslsb Features and Technical Specifications: - Table size: 800 x 1000 mm - Table opening diameter: 480/380/170/125 mm - Milling spindle taper: MK 5 - Milling spindle speed: 3000, 4500, 6000, 9000 rpm - Milling spindle height adjustment range: 150 mm - Distance from center of milling spindle to front edge of table: 400 mm - Maximum allowable tool diameter: 250 mm - With wooden stop jaws (can be replaced with metal stop jaws upon request) - With a wooden Her 3 roller feed mechanism - With heavy-duty sliding table; runs on ball bearings along guideways milled to be absolutely parallel Dimensions: 205 x 130 x 150 cm Weight: approx. 800 kg

Condition: used, Year of construction: 1986, Table milling machine Manufacturer: Schneider Type: SK2/4 II Year of manufacture: 1986 Technical data - 3,000 - 10,000 rpm - Runs in both directions (left/right) - with Haffner feed unit Tedpfxozuyxaj Anlob - including accessories Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Swivel spindle milling machine Manufacturer: Schröder Table dimensions: - Width 1,260 mm + 430 mm extension - Depth 770 mm + 400 mm extension Tjdpfx Aezuyw Nsnlsb Spindle diameter: 30 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Catalogue number 7784 TECHNICAL DATA - Spindle diameter: 30 mm - Working height of spindle: 150 mm - Interchangeable spindle - Spindle locking - Adjustable up/down + angle - Original cast iron fence with full adjustment - 4 spindle speeds + left/right: 3000/5000/6000/10000 rpm - Table dimensions: 1120x800 mm - Motor: 3.7 kW - Dimensions (L/W/H): 1100x1400x1160 mm - Weight: 775 kg ADVANTAGES – German-made – Used milling machine – Very good condition Tsdpfozwwd Esx Anlob Net price: 6,900 PLN Net price: 1,640 EUR Net price calculated at a rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 1992, Table milling machine, Panhans Type 250, from a training workshop. Tedpfx Aneztwr Isljb - Dovetail and slot table - Aigner integral fence - Elu feed system - Power: 5.5 kW - Speeds: 3000/4500/6000/9000 rpm - Clockwise/counterclockwise operation - Spindle: 30 mm #8503 Net price

Condition: used, Year of construction: 1992, Table dimensions 1100 x 880 mm Motor output 7,5 kW Spindle diameter 30 mm reus 3000/4500/6000/9000 U/min Weight 650 kg Year 1992 Used Machine Year of manufacture: 1992 Features and technical specifications: - Universal table milling machine for machining wood, plastic, and light metals. - Interchangeable MK5 milling arbor, secured for left/right rotation - Special ball bearings for high-speed operation - Special ribbed table with quill and additional dust extraction under the table. - Locking mechanism for tool change in any spindle position - Digital height indicator with 1/10 mm resolution and zero setting (optional) - Maintenance-free and dust-protected bevel gear feed mechanism: 1 revolution = 1 mm, stroke 130 mm - Central lubrication of both bearings and the feed spindle - SFM 101 control panel - Speed displayed visually and automatically - With automatic brake - Extremely fast belt change with automatic speed display - Machine table dimensions: 1,100 × 880 mm - Working height (table): 900 mm - Motor power: 7.5 kW - Speeds (VBG 7 visual display): 3,000 / 4,500 / 6,000 / 9,000 rpm Tsdozr Rq Iopfx Anlob - Max. height adjustment of the milling spindle: 130 mm - Safety interlock for high speeds - Milling spindle taper: MK 5 - Milling spindle, interchangeable: Ø 30 mm - A-weighted sound pressure level at ear level: L(A) 75 dB - Connection diameter: 2x120 mm - Air velocity: 24 m/s - Air flow rate at table: 680 m³/h - Airflow rate at the router fence: 1,060 m³/h - Dimensions: approx. 140 x 100 x 175 cm - Weight: approx. 700 kg

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Tsdoiknp Repfx Anlob Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Year of construction: 1994, condition: ready for operation (used), There are two Spindle Moulder Casadei available. (1) Casadei FM5L, max. milling height: 100mm, motor power: 6kW, length: 2540mm, width: 1195mm, height: 1500mm, weight: approx. 950kg, year of construction: 1992, with table extension. (2) Casadei FM5C, motor power: 6.8kW, year of construction: 1994, with trolley. On-site inspection is possible. Todpfjurwy Nox Anlob

Condition: new, Catalog number: S0367 Todpfx Anozullfolsb TECHNICAL DATA dimensions of the work table: 800x800mm motor power S1/S6: 3.0 / 4.4kW diameter of the hole in the table: 190mm spindle diameter: 30mm spindle tilt: 0° -45° spindle speed: 1400 / 3500 / 6000 / 8000rpm rotation: right, left vertical spindle travel: 175mm working height of the spindle: 125mm max. tool diameter for profiling / for tenon machining: 180/250mm diameter of the extraction nozzle: 120mm dimensions L/W/H: 2800x1800x1090mm weight: 410kg – machine is new – tilting spindle – with side table Net price: 17200 PLN Net price: 4100 EUR, depending on an exchange rate of 4.2 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Catalog number: 8073 TECHNICAL DATA Todpfx Aezuk Dasnlsb - Spindle diameter: 30mm - Spindle working height: 100mm - Adjustable up/down and angle - Original guide - Crosscut carriage - 4 types of rotational speeds: 3000, 6000, 8000, 10000 rpm - Table dimensions with carriage: 660x950mm - Cast iron table - With electric brake - Motor: 4kW - Dust extraction port diameter: 120mm - Dimensions (L/W/H): 980x810x1350mm - Weight: 230kg ADVANTAGES - Made in Germany - Crosscut carriage - Tilting spindle - Brake - Unpainted - Used milling machine, very good condition Net price: 8900 PLN Net price: 2119 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual Tsdpfx Anjzt Ai Eolsb with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation