Used Toolholder for sale (239)

Condition: new, measuring length bis 4000 mm Tube length 4280 mm numbers of toolholders 5 Rohr Edelstahl dimensions 4,3 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely Hedpfovkiwujx Aqionr desired length. Danger: This is just the stop system without roller conveyor!

Condition: new, measuring length bis 5000 mm Tube length 5280 mm numbers of toolholders 6 Rohr Edelstahl dimensions 5,3 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. Hedpfsvkiwhox Aqisnr The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor!

Condition: new, measuring length bis 3000 mm Tube length 3280 mm numbers of toolholders 4 Rohr galvanisch Verzinkt dimensions 3,3 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller Hnodpfxjvkiwns Aqior conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor!

Condition: new, measuring length bis 2000 mm Tube length 2280 mm numbers of toolholders 3 Rohr galvanisch Verzinkt dimensions 2,3 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely Hedpfxsvkiwzs Aqionr desired length. Danger: This is just the stop system without roller conveyor!

Condition: used, turning diameter 710 mm turning length 2000 mm control Heidenhain type Manuel Plus turning diameter over slide 410 mm x-travel 385 mm turning speeds 9-1800 U/min transmission ratio 2 drive capacity - workpiece 22 kW Torque 2500 Nm spindle diameter 160 mm spindle passage 92 mm total power requirement 49 KVA weight of the machine ca. 5,6 t dimensions of the machine ca. 5x2x2,2 m Spindle nose DIN 55027/11 Toolholder: Type MultiFix C Tool holder Capto C4 Tailstock: Tailstock mount MK 6 Quill diameter 110 mm Quill stroke 210 mm Feed rates: Rapid traverse (X/Z) 8/10 m/min Maximum feed rate 5,000 mm/min Maximum feed force 2,000 daN The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Hodpfeyqtnbex Aqionr than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, L + Z Lathe WEILER Model Praktikant 800R Machine No. 3309 Year of manufacture: 1984 Centers distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and cross Chuck mounting: Short taper DIN 55027 size 5, 4x M10 Hnodpfx Asyg Rfioqisr Tailstock taper: MT 3 Tailstock quill travel: 90 mm Spindle speed: 42 – 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear steps - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - MULTIFIX quick-change toolpost size A with 3 exchangeable toolholders - Live center - Emergency stop - Folding chuck guard - Coolant system - Operating manual with electrical schematic - Very low operating hours Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 600 kg Very good condition

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 415 mm, controller manufacturer: BROTHER, total height: 2,360 mm, table load: 200 kg, overall weight: 4,600 kg, spindle speed (max.): 12,000 rpm, This Brother TC 32B Vertical Machining Center was built in Japan in 2007. Equipped with a Brother control unit, this machine incorporates 3 + 1 axis and a rotary table. Its BT30 spindle can operate with a speed up to 12000 rpm. Additional equipment • chip conveyor • remote flyer • Kitagawa rotary plate Machine Benefits Technical Machine Benefits Hnodpfx Aoyi Ehksqisr • 3 + 1 axis • Toolholders: random 26 positions • Fast forwards: 70-70-70 m/min • Pallets: 2 / 600 x 425 Dimensions Machine Depth 3700 mm

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, spindle motor power: 11,000 W, total height: 2,120 mm, overall weight: 5,500 kg, product length (max.): 2,900 mm, number of axes: 3, This 3s DMG Mori Seiki NLX1500MC/500 horizontal turning machine was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, X-axis travel of 260 mm, and Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret with 12 driven stations, consider the opportunity to buy this DMG Mori Seiki NLX1500MC/500 horizontal turning machine. Contact us for further details. • Operating hours: 11,996 • Control: MAPPS M730BL • Max. turning diameter without interference: 366 mm • C-axis: 360,000° • Turning length: 515 mm • Spindle nose: A2-5" • Spindle bore: 61 mm • Bar capacity: Ø 52 mm • Turret: 12 stations (all driven), indexing time 0.25 sec • Driven tools: 6,000 rpm, 5.5 kW • Tailstock: programmable (B-axis), stroke 564 mm • Coolant pump • Oil cooler • Electronic handwheel • 3-color status lamp • Air-conditioned electrical cabinet • Condition/availability: machine in perfect condition; excellent appearance; very good condition; videos available; immediately available Additional equipment • Chip conveyor • Bar feeder interface • Bar feeder: SAMSYS MULTI-3000 (short bar, 1000 mm) • Hydraulic chuck: KITAGAWA BB208, Ø 165 mm • Collet chuck: HAINBUCH COMBI TOPlus size 65 • HAINBUCH collets: Ø 6.5 – 10 – 16 – 18 – 20 – 25 – 26 – 30 – 40 mm • Square collets: 20×20 – 35×35 – 40×40 mm • Hex collet: 14 mm • Tool measuring probe arm • 7 driven toolholders (3 axial, 4 radial) • 15 static toolholders • Parts catcher • Automatic door opening/closing Hnedpfx Aqeyg Icloisr • Isolation transformer • Documentation & CD-ROM • Transport and handling clamping brackets

Condition: used, Year of construction: 2023, gebraucht 2023 1675 prompt, Zwischenverkauf v Bulgarien 17600 € 1 325 mm 1000 mm 165 mm 32 mm 190 mm 200 mm 5 4,5 MK 12 85 - 2.000 1/min 48 0.006 - 1.77 mm/U 0.003 - 0.885 mm/U 0.1 - 28 mm 75 - 2,5 Gänge/" 0.1 - 1.75 150 mm 95 mm 40 mm 3 MK 100 mm 2.2 kW 2150 mm 950 mm 1350 mm 770 kg demo machine / mint condition net price (price for new machine € 23.970,00) Hodpfx Aqowirwyjijnr driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" incl. following optional equipment: 1 lenght stop BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2020, gebraucht 2020 1658 prompt, Zwischenverkauf v Bulgarien 26500 € 1 22600 € 400 mm 1000 mm 200 mm 52 mm Hedpewirdtsfx Aqienr 235 mm 320 mm 6 6 MK 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg This machine is used in our workshop for repair work, therefore it has only been used very little so far. (New price € 37,910.00) driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: ready for operation (used), L&Z Lathe MONDIALE LALLIC 16 N / incl. Acurite / 3-axis digital readout - Centre height: 165 mm - Swing over bed: 325 mm - Distance between centres: 1000 mm - Spindle bore approx. 42 mm - 3-axis digital display ACU-RITE - Speed range: 45–2000 rpm - Automatic longitudinal/cross feeds - Tailstock Morse Taper 4 - Thread cutting: metric / imperial etc. - Quick-change toolholder - Three-jaw chuck - Electrical chuck guard - Chip backsplash Dimensions: L×W×H 2.1×1.2×1.6 m / Weight: 1700 kg Hedpfsy N Ecisx Aqijnr Errors and omissions excepted.

Condition: new, Bernardo universal lathe Solid 460 x 1500 Pro Vario Technical specifications center width: 1500 mm center height: 230 mm Swing diameter over bed: 460 mm Swing diameter over cranking: 690 mm Swing diameter over cross slide: 274 mm bed width: 300 mm spindle bore: 80 mm spindle mounting: DIN 55029, D1 - 8 Speed range, 2 steps: 25 - 250 / 250 - 1700 rpm range of longitudinal feeds: (42) 0,031 - 1,7 mm/rev Range face feeds: (42) 0.014 - 0.784 mm/rev Metric threads: (41) 0.1 - 14 mm inch threads: (60) 2 - 112 Gg/1" Quill diameter: 60 mm quill travel: 130 mm quill mount: MK 4 Motor power: 5,5 kW (7,5 PS) Machine dimensions: (W x D x H) 2750 x 1080 x 1370 mm weight approx. 2050 kg Scope of delivery 3-axis digital display ES-12 V with LCD display 3-jaw chuck PS3-250 mm / D8 Fixed steady rest - passage diam. max. 150 mm Moving steady rest - passage diam. max. 110 mm Initial filling with Shell Tellus 46 Clamping disc 450 mm Quick-change toolholder with 4 inserts Safety device for quick-change toolholder Foot pedal with brake function according to CE Coolant device Frequency converter Hnodpfx Aenfu Ameqier Slipping clutch Change gears Reducing sleeve 2 centering points Threaded clock LED machine light Chip rear wall Operating tool Rapid traverse longitudinal and plane

Condition: as good as new (ex-display), Intake opening: 2000 x 1900 mm Motor power: 2 x 75 kW Rotor flight circle: Ø 600 mm Rotor speed: approx. 84 rpm Cutting system: 152 cutting inserts 40x40x20 mm on toolholders Screen perforation: with this Screen perforation is for achieving the security levels P2 to P5 Hedpfx Ascb Dttsqisnr Counter knife: with cutting gap adjustment Machine weight: approx. 21.000 kg Machine number: A 32

Condition: used, Intake opening: 1.200 x 1.600 mm Motor power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Hodsbq Stqepfx Aqienr Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5.900 kg

Condition: as good as new (ex-display), Intake opening: 1200 x 1600 mm Motor power: 55 kW Rotor flight circle: Ø 600 mm Rotor speed: approx. 84 rpm Cutting system: 56 cutting inserts 60x60x30 mm on toolholders Hnsdpfxscbnigj Aqisr Screen perforation: Ø 40 mm Counter knife: with cutting gap adjustment Machine weight: approx. 7.000 kg Machine number: A 21

Condition: excellent (used), functionality: fully functional, High-Precision Lead and Feed Screw Lathe Model B30 LZS with Accessory Cabinet and 3-Axis Fagor DRO from UNI Technical Data: >> Centre Height: 120 mm Hjdpfx Aqjxyh Ndsionr >> Centre Distance: 560 mm >> Spindle Bore: 30 mm >> Max. Swing Diameter: 250 mm >> Longitudinal and Cross Feeds >> Thread Cutting: Metric, Module, Inch >> Infinitely variable spindle speeds from 30–3000 rpm Accessories: - 3-Axis Fagor Digital Readout - Tool cabinet including: >> 3-jaw chuck >> 4-jaw chuck >> Toolholder >> Drill chuck; live centre >> Collet chuck with collets >> Fixed and travelling steady rest >> Machine feet >> And much more About the Machine: Offered is a Lorch high-precision lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The machine runs quietly, even at high speeds. Equipped with a 3-axis Fagor digital readout and a wide range of accessories. The machine was previously installed in a university. You are welcome to inspect the machine under power on site and see its excellent condition for yourself.

Condition: excellent (used), functionality: fully functional, Schaublin 135 High-Precision Lathe with 3-Axis K&C Digital Readout NEW and Accessory Cabinet in Excellent Ex-University Condition! Technical Data: >> Centre height: 135 mm >> Distance between centres: 630 mm >> Swing over bed: 315 mm >> Spindle mount: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric thread pitches: 0.25–14 mm >> Tailstock: MT3 >> Infinitely variable speed range: 55–3000 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 3-axis digital readout by K&C (new), 12 months manufacturer’s warranty with user manual Functions: Switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> Accessory cabinet containing: - 160 mm 3-jaw chuck with two sets of jaws - Multifix B toolholder with 3 pockets - Internal and external collets with quick-change system - Change gears - 4-jaw chuck - Face plate - Fixed and travelling steady rests - Coolant system - Centres Hnedpfx Aqsx H Szysior - Operating manual - And much more About the machine: For sale is a Schaublin 135 high-precision lathe. The machine is in excellent condition, coming from a university and only lightly used. Equipped with a NEW K&C 3-axis digital readout and a comprehensive range of accessories. You are invited to inspect the machine under power on site to verify its condition.

Condition: used, EMAG VL 4 is a machining cell / vertical lathe engineered for high-precision work, exceptional accuracy and production reliability. Capacities: 2 machines, 2 axes; max workpiece dimension 200 mm; Z travel 400 mm; X travel 750 mm; turret 12 positions with 12 driven tools. Specs: spindle speeds up to 6000 min-1 with stepless control to 4500 min-1; spindle power 25/18 kW; torque 280/202 Nm; supply 3x400V 50Hz; total power 36 kW; footprint L5300×W2300×H3650 mm. Equipment: chip conveyor, automatic loading/unloading, set of toolholders, status light, spare parts. Achieves tight tolerances; suited for automotive, aerospace, machine tools and medical. Hodpfoyxnyvox Aqijnr

Condition: ready for operation (used), Year of construction: 2001, CNC twin table ERGON CNC Maskin SCM Hnjdsn Hx Tljpfx Aqior Type:Ergon Serie no:AA1/012348 Year:2001 CNC machine SCM ERGON Program NUM PC, and CAD ALIPA CAM 2 work tables simultaneoulsy or single work 2 tool magazin/too lchange each 12 holders 2 electro spindles each 11 kw, 18000rpm who can work in pair (DUOSET) independence Z axe stroke Tool holder HSK-63 1 drillbox 18 spindles Toolchange magazin 2x12 places Angular head Manual/instruction, pneumatic, electric diagram in severaL languages on CD Technical info: Control, program NUM-PC, CAD Alpha CAM Axis stroke X-Y-Z 4500-1740x-300mm Work tables 2 pcs each 2160x1520mm electyro spindles/routers DUOSET 2x11kw, 18000rpmwho can work in pair Vertical stroke of 2 independent Z axis Syncron electronic floating head 2 carousel toolholders for change each 12 pcs HSK 63 cone Vector axe Vacuumpump 90m3/h F18-drillbox 18 spindles Power 400 volt, 50 Hz, 3 phase Dimension set up approx:7460x5500mm X-x Weight 7000 kg Stock no:2001650BXA Price: 200000 SEK

Condition: good (used), MAchine come with toolholders. Hjdpjvk Ng Aofx Aqijnr

Condition: used, Year of construction: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH Signs of use present • Hardened and ground Z-axis guideway • Spindle mount: Camlock DIN ISO 702-2 No. 8 • Precisely machined carriage • Handwheels with adjustable fine graduation 0.04 / 0.02 mm • All guides adjustable via gib strips • Shafts, gears, and main spindle running in oil bath • Compound slide adjustment range ± 90° • Guaranteed spindle nose runout accuracy better than 0.015 mm • Gear wheels move smoothly, hardened and ground, mounted with 2 adjustable precision tapered roller bearings • Clearly arranged selector levers for feed speed selection • Enclosed rapid-shift feed gearbox design • Gears and shafts hardened and ground, running in oil bath on precision bearings • Switches with lifecycle calculation, tested according to EN ISO 13849 • Bed carriage with reversible operation via shift spindle • Centralized lubrication on bed carriage • Leadscrew cover • Emergency stop pushbutton, motor protection switch, lockable main switch • Tailstock quill and handwheel with adjustable fine graduation 0.025 mm • Fast, simple, tool-free adjustment via clamping lever • Heavily ribbed prism bed, inductively hardened and precision-ground from cast iron • Coolant system with separate coolant tank, fill level indicator and oil separator; easy and complete draining and cleaning according to DIN • LED machine lamp in chip guard • Two gearbox stages • Spindle bore / bar capacity Ø 105 mm • Siemens Sinamics frequency converter / Safety Integrated • Drag chain for gentle routing of cables and hoses • Thread dial gauge scale adjustable • Quick-change toolholder SWH 7-C • 1 toolholder 32 x 150 Type D for 25 mm square tool bits • Digital position display DPA 21 • Glass scales Dimensions and Weight Length approx. 3450 mm Width/depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working Range Centre height: 280 mm Centre distance: 1910 mm Swing over bed: 560 mm Swing in bed gap: 790 mm Swing over cross slide: 355 mm Turning length in bed gap: 170 mm Bed width: 350 mm Speed range Number of speed ranges: 2 Speed range: 25 – 1600 rpm Speed control: electronically adjustable Electrical Data Hedpfxsx Dzxae Aqisnr Output power (motor): 7.5 kW Total power rating: 8.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant System Coolant pump capacity: 125 W Standards and Approvals Standard: DIN EN 55011 Tailstock Mount: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Max. toolholder seat height: 25 mm Spindle taper: Ø 113 (Taper 1:20) mm Metric thread pitches: 0.1–14 mm/rev Number of metric threads: 47 Imperial thread pitches: 112–2 TPI Number of imperial threads: 60 Diametral pitch: 4–112 DPI Number of diametral pitch threads: 50 Module threads: 0.1–7 mm/rev Number of module threads: 34 Compound slide travel: 130 mm Cross slide travel: 316 mm Bed carriage travel: 1710 mm Longitudinal feed range: 0.031–1.7 mm/rev Number of longitudinal feeds: 42 Face feed range: 0.014–0.784 mm/rev Number of face feeds: 42

Condition: good (used), Year of construction: 1975, Offer 24204 Technical data: - Maximum swing diameter over bed: 420 mm - Centre distance: 1000 mm - Spindle bore: mm - Tailstock quill taper: MT 4 - Tailstock quill travel: 200 mm - Spindle speeds: 40 - 2000 rpm - Longitudinal & facing feeds - Metric thread pitches - Imperial threads - Module threads - Drive: 400 V - Includes: 3-jaw chuck - SWS steel toolholder with 3 inserts - Space required: approx. W 2800 x H 1250 x D 950 mm Hnsdpfx Aqex Tqg Isisr - Weight: approx. 2200 kg

Condition: excellent (used), Deckel FP1 AKTIV (3-Axis Active) Machine no.: 2102-3240 Year of manufacture: approx. 1988 Travel paths: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2,000 rpm Motor power: 1.6 and 2 kW Power supply: 380 V, 50 Hz Equipment/Accessories: - Active digital readout, 3 axes, HEIDENHAIN type TNC 113 - Infinitely variable feed in X, Y, and Z axes Hnjdpfeyll A Tjx Aqior - Vertical milling head quill travel: 60 mm - Vertical milling head swivels and extends 100 mm horizontally - Coolant system (coolant tank in machine base) - Documentation - Central lubrication system - Machine vice - Various toolholders/collets/tools Space required (L x W x H): 1,350 x 1,100 x 1,700 mm Weight: 850 kg The machine has been visually reconditioned and technically inspected. Geometry inspection videos can be provided upon request. Backlash Y axis: 0.1 mm Backlash X axis: 0.2 mm Backlash Z axis: 0.15 mm Runout horizontal spindle: 0.001 mm Runout vertical spindle: 0.001 mm Parallelism deviation Y axis: 0.002 mm (measurement path: 150 mm) Parallelism deviation X axis: 0.01 mm (measurement path: 300 mm) Geometry inspection videos can be provided upon request. The following parts have been renewed: - Gears in horizontal head replaced and gear shaft newly mounted - New guide cover for Z axis + various attached parts - Machine refurbished - New LEDs installed - Y-axis chain tensioner overhauled - Reference point programming checked - Function test carried out

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000 x 1260 x 1950 mm TECHNICAL CHARACTERISTICS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation: - 1 sliding headstock: Z1, S1 - 2 independent vertical gangs: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating sub-operation axis: X4, S5 Hnodpfxsw T Tcwj Aqisr Bar feeder position: right of the operator Machine axis height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: Guide bush machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotating Collet for guide bush, type: Meister 605 Number of lateral tool stations, combined: Fixed: 2 x 5 Rotating: 3 + 3 Number of frontal tool stations, combined: Fixed: 4 Rotating: 3 Number of rear tool stations, combined: Fixed: 3 + 3 Rotating: 3 + 3 Tool section: 12 x 12 mm Standard revolving toolholder: ESX 20 Bar feeder: yes Part catcher: yes All technical details are provided without guarantee and subject to errors or omissions.

Condition: good (used), Year of construction: 2006, CNC Swiss-Type Automatic Lathe Citizen Cincom M16 Technical Specifications Year of manufacture: 2006 Maximum machining diameter: ø16 mm Maximum machining length: 200 mm per chucking Maximum diameter for frontal drilling: ø6 mm Maximum diameter for frontal threading: M6 Main spindle bore diameter: ø16 mm Main spindle speed: 200 to 10,000 min⁻¹ Main spindle C-axis: 0.001° Maximum clamping diameter sub-spindle: ø16 mm Maximum back-working length: 125 mm Maximum part overhang sub-spindle: 25 mm Maximum drilling diameter back-working: ø5 mm Maximum threading diameter back side: M5 Hnedpfxjx Emnrj Aqier Sub-spindle speed: 200 to 10,000 min⁻¹ Toolholder group: max. drilling diameter ø5 mm / max. thread cutting diameter M4 Spindle speed: 200 to 8,000 min⁻¹ Turret: max. drilling diameter ø5 mm / max. threading diameter M5 / spindle speed: 200 to 6,500 min⁻¹ Number of mountable tools: up to 21+α Axis rapid traverse speeds: 20 m/min Minimum programmable increment: 0.001 mm Axis travels: X1: 60.5 mm / Y1: 208 mm / Z1: 205 mm / X2: 107.5 mm / Z2: 133 mm / X3: 195 mm / Z3: 280 mm Main spindle motor power: 2.2 kW Sub-spindle motor power: 0.75 kW Driven tool spindle: 0.75 kW The Citizen Cincom M16 is a high-precision CNC Swiss-type automatic lathe designed for demanding series production of small and precision components. With a machining diameter up to ø16 mm, machining lengths up to 200 mm, and high spindle speeds up to 10,000 min⁻¹, this machine is ideal for complex machining tasks. The integrated C-axis on both main and sub-spindle enables precise positioning, as well as sophisticated milling and drilling operations. The machine offers extensive tool capacity with up to 21 tools and multiple driven tool stations, allowing even complex processes to be completed in a single setup. Generous axis travels and precise feed increments of 0.001 mm ensure the highest manufacturing quality with minimal tolerances. The delivery includes an LNS Express-220 bar feeder from 2011, providing automated material feed to significantly increase productivity and process reliability. Various toolholders are also included in the package. The machine is robustly built and designed for continuous industrial operation – ideal for the production of watch, medical, electronics, or automotive components. No guarantee is given for the correctness, completeness, or currentness of the information provided.