Center lathe

SCHAERER UN 300 x 1000

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 238828, Available: Immediately Kdjdpfjpr Uvrex Aqqer

Condition: used, Year of manufacture: 1980s/90s Technical data: Centre height: 185 mm Centre distance: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock taper: MT 3 Quill stroke: 110 mm Dimensions (W x D x H), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw chuck, make: Röhm, ø 200 mm - Quick-change tool post with 4 holders Ksdpfxoydk Hho Aqqodr - Bed stop - Chip tray

Year of construction: 1980, condition: used, Compressed air dryer, refrigeration dryer Kdodockgivopfx Aqqsr -Max. Pressure: 16 bar -Operating voltage: 380 V -Dimensions: 1050/950/H1770 mm -Weight: 556 kg

Condition: used, Technical details: turning length: 630 mm Kdjdpfsvbh N Rox Aqqsr swing diameter over slide rest: Hinterdrehschlitten: 250 mm center height over bed: 270 mm centre distance: 900 mm spindle bore: 26 mm range of revolutions per minute - continous: 1,8 - 450 U/min return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min cross feed: 0,07 - 1,11 / 36 step mm/U longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U tailstock quill taper MT: 5 quill travel: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,9 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swiveling range of the rear slide = 360deg. Swiveling range of the cross slide = 360degrees Equipment: lathe chuck driving disc Ø 210 mm with fixed tip fixed tip in tailstock with 4 pieces machine feet 3 jaw chuck Ø 250 mm i.D. *

Condition: used, Year of construction: 1977, Technical details: x-travel: 1050 mm y-travel: 500 mm z-travel: 500 mm spindle taper ISO: SK40 spindle head swivable left - right: 90 ° quill travel: 180 mm range of revolution per miute: 36 - / 18 step U/min feed:: X+Z: mm/min feed:: Y: - 900 mm/min. rapid traverse : X/Z: / Y: 900 mm/min table surface area: 1200 x 550 mm total power requirement: ca. 10 kW machine weight approx.: 4400 kg dimension machine xH: 3,1 x 2,5 x 2,2 m Console design with tilting, tilting and swiveling table, as well as adjustable vertical milling head. Machine with 3-axis digital readout (with resolution 0.01mm) with feed and individual drive of all three axes Kjdpfx Aju Ndd Reqqodr stepless feed X-axis: Support lengthwise = 700mm; univ. milling table lengthwise 350mm = total lengthwise: 1050mm Accessories: Comparable with the pictures *

Year of construction: 1973, condition: used, bore capacity in steel (diameter) 32 mm arm length 410 - 1000 mm Kdodpfx Aqogmu A Ssqor workpiece height max. 765 mm coolant ja boring spindle diameter 38 mm diameter of quill 70 mm spindle stroke 225 mm boring spindle MK 4 mm/min spindle turning speed - stepless 70 - 2000 U/min feed range - spindle 0,04 - 0,32 mm/U column diameter 225 mm bore radius max./min max. 1130 mm table surface area 630 x 1320 mm height adjustment 500 mm base plate 1500 x 1000 mm T-slots 4 Stück T-slot - distance 18 mm total power requirement 2,2 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m shift of supports: 590 mm without turntable and tools

Condition: ready for operation (used), 1 used bed type milling machine Manufacturer: Knuth Model: KB 1400 Year: 2006 Technical Specifications: Working Area Distance spindle axis to table surface: 150 mm – 650 mm Number of T-slots: 3 Table clamping surface: 1400 mm x 400 mm Kdedexnp Epspfx Aqqjr T-slot width: 18 mm T-slot spacing: 100 mm Height adjustment speed (max.): 1670 mm/min Travel X-axis travel: 950 mm Y-axis travel: 400 mm Z-axis travel: 500 mm Vertical Milling Head Spindle taper: SK 50 DIN 2080 Overhang: 510 mm Spindle speed (vertical): 30 rpm – 1800 rpm Quill stroke: 105 mm Head swivel range: ±30° Rapid Traverse Rapid traverse X-axis: 1670 mm/min Rapid traverse Y-axis: 1670 mm/min Rapid traverse Z-axis: 1670 mm/min Feed Feed speed X-axis: 18 mm/min – 627 mm/min Feed speed Y-axis: 18 mm/min – 627 mm/min Feed speed Z-axis: 18 mm/min – 627 mm/min Drive Capacity Main drive motor power: 7.5 kW Feed motor power: 0.75 kW Z-axis motor power: 0.75 kW Coolant pump motor power: 0.04 kW Dimensions and Weight Coolant pump flow rate: 12 l/min Dimensions (L x W x H): 2.29 m x 1.77 m x 2.12 m Weight: 3660 kg

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available in stock subject to prior sale. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Ksdpsvbqlhjfx Aqqodr Technical data: Center height 385 mm Max. diameter over bed 770 mm Max. diameter over carriage 575 mm Max. diameter over pocket 1050 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1550 x 1700 mm Net weight 3250 Kg Gross weight 3250.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2025-09/2404095, turning diameter over cross slide: 224 mm, spindle bore: 51 mm, center height: 180 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,680 mm, total height: 1,400 mm, TECHNICAL DATA: Centre distance: 1000 mm Centre height: 180 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 224 mm Swing diameter without gap bridge: 502 mm Gap bridge length: 235 mm Cross slide travel: 170 mm Top slide travel: 95 mm Max. turning tool cross section: 16x16 mm Chuck mounting: D1 - 4 Spindle mounting (lathe spindle): MT 6 Spindle bore: 51 mm Spindle speed: 70 - 2000 rpm Number of speed ranges: 8 Longitudinal feeds: (32) 0.052 - 0.392 mm/rev Cross feeds: (32) 0.014 - 0.380 mm/rev Metric thread pitch: (26) 0.4 - 7 mm Metric module threads: (26) 0.4 - 7 mm Inch threads, TPI: (34) 4 - 56 TPI Inch module threads, TPI: (34) 4 - 56 TPI Leadscrew pitch: 4 mm Leadscrew diameter: 32 mm Quill mounting: MT 3 Quill diameter: 32 mm Quill travel: 100 mm Motor power: 1500 W Coolant pump: 40 W Electrical connection: 400/50 V/Hz Total length: 1680 mm Total height: 1400 mm Weight: 520 kg Standard accessories: - RÖHM 3-jaw chuck Ø 200 mm - 4-jaw faceplate chuck Ø 200 mm - Face plate Ø 320 mm - 2 fixed centre points - Live centre MT 3 - Travelling steady Kdjdpfx Aqsxykafoqer - Fixed steady - Quick-change tool post set ME - Thread dial and change gear set - Halogen machine lamp - Emergency stop button / No-voltage release - Chuck guard with safety switch - Machine base / chip tray / splash guard - Tool kit / operating manual / CE

Condition: good (used), Year of construction: 2013, Centre height: 330 mm Centre distance: 2000 mm Spindle bore diameter: 103 mm Max. turning diameter over bed: 660 mm Max. turning diameter over carriage: 420 mm Spindle speed range: 36 – 1600 rpm (12 steps) Spindle nose: ISO 702/II No. 8 Longitudinal feed range: 0.063 – 2.52 mm/rev (65 steps) Cross feed range: 0.027 – 1.07 mm/rev (65 steps) Metric threads: 1 – 14 mm (22 steps) Inch threads: 28 – 2 TPI (25 steps) Module threads: 0.5 – 7 mm (18 steps) Diametral pitch: 56 – 4 DP (24 steps) Kdsdpfxjx Ux D De Aqqsr Motor power: 7.5 kW Weight: 3200 kg Dimensions: 3635 x 1050 x 1450 mm