Used Trimming for sale (2,137)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: C-261-04-2523, feed rate X-axis: 9,000 m/min, saw blade diameter: 100 mm, rotational speed (max.): 12,000 rpm, Submitting a bid obliges you to collect the item by the deadline of 14.10.2025! TECHNICAL DETAILS Edge Processing Edge type: Straight edges Edge material: Cut-to-size strips, lip cuts, coil material Feed speed: 9 m/min Edge material thickness: 0.4–3.0 mm Lip thickness: 0.4–3.0 mm Edge material height: 55 mm Coil diameter: 800 mm Rotation speed: 12,000 rpm Max. tool dimensions: 100 × 62 × 30 mm Extraction port Ø: 120 mm Workpiece Data Workpiece thickness: 8–50 mm Positioning accuracy: 0.1 mm Edge Banding Edge type: Straight edges Edge material: Coil material Max. tape cut: 3 × 30 mm or 0.8 × 45 mm Operating pressure: 6 bar Edge Glue Applicator Rotation speed: up to 1,800 rpm End Trimming Unit Motor speed: 12,000 rpm Saw blade diameter: 100 mm Cutting width: 2.6 mm Bore diameter: 32 mm Workpiece thickness: 45 mm Max. edge material height: 3 mm Edge material angle: 0–15° Edge material cross-section: 135 mm² Flush Trim Unit Rotation speed: 12,000 rpm Max. workpiece thickness: 8–50 mm Max. edge thickness: 3 mm Straight tools: 2 × WPL milling cutter Ø 50 × 12 × 16 mm, z = 4 Combination tools r = 3 mm: 2 × Trimmer Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Hfedoxhgk Aepfx Ag Njn Voltage: 400 V Frequency: 50 Hz Fuse protection: 16 A Control voltage: 24 V

Condition: used, Year of construction: 2006, Ref:10882 . 2006 SCS ‘Easy Trim’ Front Cutting Device. For the front (foredge) cutting of perfect bound and thread sewn soft cover books (without flaps device). Can be integrated in or off-line, and used either before or after the three knife trimmer (4th cut) and when not in use the unit can be simply used as a conveyor. Very quick size change of approx. 3 mins through simple keying in of book parameters. Front trim using a steel knife against a plastic cutting stick. Motorised delivery table. Single button push transforms the unit into a regular conveyor belt so no divert or extra conveyor necessary. Specification: Book spine length, Max: 540 mm, Min: 120 mm Book width trimmed, Max: 350 mm, Min: 100 mm Book thickness, Max: 60 mm, Min: 5 mm Off-cut width, Max: 45 mm, Min: 5 mm Mechanical speed, Max: 4,000 cycles/hr. Hfedpfsvtcviex Ag Non Compressed air required : 100 ltr/min.@ 6 bar

Condition: excellent (used), Year of construction: 2019, operating hours: 613 h, functionality: fully functional, machine/vehicle number: AH00001133, feed rate X-axis: 18 m/min, power of the buffing unit: 260 W, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, power of the milling unit: 1,500 W, overall weight: 1,746 kg, type of input current: AC, compressed air connection: 6 bar, height adjustment type: mechanical, input voltage: 415 V, power: 20 kW (27.19 HP), input current: 48 A, input frequency: 50 Hz, Manufacturer: SCM Model: Olimpic K560R Year:2019 Condition: Excellent. Lightly used and currently used in manufacturing Availability: End Oct 2025 Location: Northern Ireland Financial Information: VAT: This will be charged to UK companies only Duty: There is no customs or duty selling into the EU from Northern Ireland Price: This is as seen and does not include preparing the machine for transport Machine Specification: If you want to run Airtec (Airfusion) PU and EVA then this is the machine for you. This is a fully specified K560 with many extras. Everything you need to put it into production quickly is included. Please read the full description. Track Speed 12-18mm Panel Thickness 8-60mm Max Edge thickness Strips 6mm Max Edge Thickness Coil 3mm Coil plate diameter 780mm Distance between two panels 600mm Min Panel Length 140mm Min Panel Width 100mm Work height 900mm Machine length: approx. 4950 mm Autoset: Automates the machine set up when changing work (e.g. changing from 1st to 2nd passage) Pre-Milling: 2 off high freq motors Max removal 3mm Infra-red Ceramic Lamps: The heat the panels before gluing AAR anti-adhesive unit: Prevents adhesive sticking to the upper and lower panel surfaces SGP - Special Glue Pot: Machine configured for BOTH EVA and PU glue Airfusion +E unit: Hot air application of pre-coated edge band to avoid the use of glue K/SEL end trim unit: 2 high freq motors 0-15 deg adjustment of cutting angle RK trimming unit: 2 high frequency motors ROUND X Rounding unit: Twin high frequency motor corner rounding RAS/K edge scraping unit: For rounded edge scraping post machining RCV glue scraping unit: Top and bottom scraping to remove excess edge band and glue SPV brushing unit with spray: removes glue and polishes edging and boar Spray mist device for delicate edges: Allowing the processing of high gloss edging StarTouch electronic control: Touch sensitive control panel Extras included in the price: Hedpfxsw Nyqas Ag Njfn Leitz pre-milling tooling blocks – Brand new – never used Ducting – The ducting to connect to the extraction Ostermann edge band cassette – For quick change of the edging Pens and wax cabinet on wheels – For any repair needs Electrical cables and switchgear – Allows you to connect up the machine on delivery Optional extras: Extraction system to suit €4000 Compressors to suit €4500 each

Condition: used, Year of construction: 2013, total length: 4,800 mm, total height: 1,700 mm, total width: 900 mm, Weight: 1.250 kg Price: On request Edgebander Hodswlv D Njpfx Ag Nofn Serial number: 200.04.007.13 400V 11kW 3PH 50HZ 28A multifunction trimming unit Glue unit Workpiece height 8-60mm - Year: 2013 - Documentation available: No - Serial number: 200.04.007.13 - Transport dimensions: 4800mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1250kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox full bleed trimming’ finishing system. Item for sale: 1 x Xerox complete finishing system for brochure production with the following equipment: Includes A-FN13 booklet finisher Includes CZ module A-FN08 Includes 2-page trimming A-GW07 Includes Plockmatic Pro35 You will receive a complete finishing system for complete brochure production. Plug and play connection to various Xerox machines. Xerox Versant 3100 Xerox Verdant 4100 Xerox Versant 180 Xerox Versant 280 and more... Hedpoxnxy Nsfx Ag Nefn Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: good (used), mileage: 251,340 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,430 mm, first registration: 07/2018, loading space length: 1,610 mm, loading space width: 1,420 mm, loading space height: 1,290 mm, emission class: euro6, color: black, driver cabin: day cab, tire size: 245/45R19,0, number of seats: 5, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, navigation system, traction control, trailer coupling, = Additional Options and Equipment = - Electric windows - Electric mirrors - Alloy wheels - Standard - Partition wall = Notes = Number of axles: 2, Configuration: 4x2, Payload: 840 kg, Curb weight: 2360 kg, Gross vehicle weight: 3200 kg, Unbraked towing capacity: 750 kg, Braked towing capacity on central axle: 2500 kg, Tow bar, Alloy wheels, Suspension type: coil spring, Cab type: double cab, Cruise control, Air conditioning, Number of airbags: 6, Rear wiper, Parking assist: front and rear, Electric windows, Electric mirrors, Partition wall, GPS navigation, Colour: black metallic, Reversing camera, Engine power: 140 kW (188 hp), Fuel type: diesel, Emissions standard: Euro 6, Timing chain drive, Transmission: automatic, Power steering, ABS, ASR, Body type: extended, Roof rack: standard, Side doors: 2, Side windows: 2, Tailgate: tail lift, Number of seats: 5, Seat trim: leather, XL double cab, AC, automatic, Spare wheel = Additional Information = General Information Number of doors: 2 Registration number: VDD-19-S Axle Configuration Tyre size: 245/45R19.0 Brakes: disc brakes Suspension: coil spring suspension Axle 1: left tyre tread: 4 mm; right tyre tread: 4 mm Axle 2: left tyre tread: 4 mm; right tyre tread: 3 mm Dimensions Dimensions (L x W x H): 550 x 190 x 205 cm Weights Curb weight: 2,360 kg Payload: 840 kg Gross vehicle weight: 3,200 kg Hfjdpfx Ajwaravjg Non Functional Loading platform height: 54 cm Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial Information Leasing price: €433 per month (panel van, 72 months); Please ask for further information and conditions.

Condition: excellent (used), mileage: 894,587 km, power: 331 kW (450.03 HP), first registration: 03/2019, fuel type: diesel, color: blue, axle configuration: 4x2, tire size: 385/65R22.5, fuel: diesel, wheelbase: 3,750 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2019, Equipment: ABS, air conditioning, airbag, cruise control, differential lock, parking heater, soot filter, spoiler, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Aluminum fuel tank - Roof spoiler - Dual fuel tanks - Electric windows - Electronic Braking System (EBS) - High beam lights - Low noise - Speed limiter - Intarder - Air conditioning - Refrigerator - Leather interior - Leather upholstery - Power steering - Air suspension - Air horn - Fog lights - Particulate filter - Radio/CD player - Radio/cassette player - Sleeper cab - Side skirts - Sun visor - Stability control - Auxiliary heater - Body-colored bumpers - Pre-heating system - Xenon lighting - Central locking = Remarks = SCANIA R450 NGS | Retarder | 2 Tanks | 894,587 Km | 2019 | Smart Tacho 2 | Full air suspension | Complete spoiler package | Leather trim | Cool box | Sleeper bed | (P) Air conditioning | ACC | Cruise control | Automatic transmission | Euro 6-C | 4X2 | TÜV/MOT/Apk valid until 03-2026 | Belgian truck Chassis number: YS2R4X20005544715 EXPORT: Road transport: Austrian transit license plate with insurance for 21 days + €550 Shipping: Transport to port (Antwerp/Rotterdam/Amsterdam) + €300 Hfjdjxn Afvjpfx Ag Njn Transport to port Zeebrugge + €400 More about the truck: Truck video (YouTube): More about Geerts Trucks & Trailers: YouTube channel Geerts Trucks & Trailers: Instagram Geerts Trucks & Trailers: Facebook Geerts Trucks & Trailers: TikTok Geerts Trucks & Trailers: LinkedIn Geerts Trucks & Trailers: Like and subscribe to our latest listings No rights can be derived from errors in the advertisement. GEERTS Trucks & Trailers endeavors to ensure the accuracy of all information provided. = Further Information = Technical Information Number of cylinders: 6 Engine capacity: 12,742 cc Powertrain AdBlue system: Yes Transmission Transmission: 12-speed, automatic Axle configuration Axle brand: MICHELIN Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Max. axle load: 7,500 kg; Steering; Tire tread left: 70%; Tire tread right: 70% Rear axle: Tire size: 315/70R22.5; Twin tires; Differential lock; Max. axle load: 13,000 kg; Tire tread left inside: 85%; Tire tread left outside: 85%; Tire tread right inside: 85%; Tire tread right outside: 85%; Reduction: single reduction Dimensions Dimensions (L x W): 596 x 255 cm Weights Unladen weight: 8,463 kg Payload: 10,537 kg Gross vehicle weight: 19,000 kg Interior Upholstery: Leather Maintenance, History, and Condition APK (Roadworthiness Test): valid until 03.2026 Technical condition: very good Optical condition: good Further information Please contact Olivier Geerts or Edwin Geerts for more information.

Condition: excellent (used), Year of construction: 2016, Ref: 11010 . 2016 Horizon SB-07 + HT-80 EVA Line Excellent Condition! Only 3.6m books produced! Under full Horizon service contract since new! Comprising; SB-07 system binder Cover feeder EVA gluing system DB-07H Milling blower unit 2.2 kW VS-09 extraction system LD-09T turnover conveyor unit LD-09L Delivery conveyor unit SS-110 Stacker HT-80 automatic three-knife trimmer TB-100 Chip extractor unit Specification: Binder - book size: Max: 400 x 330 mm (Manual) Max: 320 x 250 mm (Auto) Min: 148 x 105 mm (Portrait) Max: 330 x 320 mm (Landscape) Hodexdc E Ujpfx Ag Nefn Min: 135 x 185 mm Trimmer, book sizes: Max: 330 x 350 mm (Untrimmed) Max: 300 x 340 mm (Trimmed) Book thickness: 1 - 45 mm Max speed: 3,200 p/h

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hjdpfx Ajlht Hweg Nsfn Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: From stock 54634 Bitburg - available in CW4 -

Year of construction: 2004, condition: not inspected (used), Brandt Optimat Edgeband trimmer with edge trim Bought by us as a used machine for a product line that didn't launch. Was functioning when decommissioned, we barely used it. Hfodpfx Agexguhgj Non

Condition: excellent (used), mileage: 147,150 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, wheelbase: 32,000 mm, first registration: 09/2021, emission class: euro6, color: grey, number of seats: 5, Year of construction: 2021, Equipment: airbag, cruise control, power assisted steering, traction control, = Additional options and accessories = - Tyre pressure monitoring - Central locking - central locking - Leather upholstery Hfodexnhxnspfx Ag Nsn - Disc brakes - Start/stop system = Particulars = W1V44781313904438 = More information = Number of cylinders: 4 Engine capacity: 1,950 cc Unladen weight: 2,310 kg Payload: 715 kg GVW: 3,100 kg Trim: Leather Technical condition: very good Optical condition: very good For more information, please contact Youri van Doorne or Timothy Schutter.

Condition: excellent (used), mileage: 45,101 km, power: 485 kW (659.42 HP), first registration: 08/2023, fuel type: diesel, color: black, axle configuration: 6x2, tire size: 385/55/22,5, fuel: diesel, wheelbase: 5,250 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2023, Equipment: ABS, air conditioning, cruise control, differential lock, navigation system, onboard computer, parking heater, soot filter, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Heated mirrors - Bluetooth - Roof spoiler - Differential lock - Electric windows - Electrically adjustable exterior mirrors - Electronic Braking System (EBS) - ESP - High beam - TV - Tipping hydraulics - Air conditioning - Refrigerator - Leather interior - Leather upholstery - Alloy wheels - Power steering - Air suspension - Air-suspended seats - Air horn - Media system - Metallic paint - Fog lights - Particulate filter - Disc brakes - Sleeper cab - Sun visor - Lane keeping assist Hfsdpfxew Smiue Ag Non - Auxiliary heating - PTO (Power Take-Off) - Central lubrication - Central locking = Further Information = Technical Information Number of cylinders: 8 Engine displacement: 16,353 cc Driveline AdBlue system: Yes Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55/22.5; Alloy wheels; Max. axle load: 8,000 kg; Steered Rear axle 1: Tire size: 315/70/22.5; Differential lock; Alloy wheels; Max. axle load: 11,500 kg Rear axle 2: Tire size: 315/70/22.5; Alloy wheels; Lift axle; Max. axle load: 7,500 kg Dimensions Dimensions (L x W x H): 746 x 255 x 395 cm Weights Unladen weight: 10,831 kg Payload: 16,169 kg Gross vehicle weight: 27,000 kg Interior Upholstery: Leather Maintenance, History and Condition APK (General Technical Inspection): valid until 02.2026 Technical condition: very good Optical condition: very good Identification Registration number: 45-BVT-4 SCANIA S 660 V8 6X2NB LONGLINE SPECIAL INTERIOR BUFFL TRACTOR UNIT WITH HYDRAULICS EURO 6 660 hp DRIVE 6X2NB 3RD AXLE LIFTABLE FULL AIR SUSPENSION WHEELBASE 400 CM CS20H LONGLINE SLEEPER CAB WITH: SPECIAL BUFFL INTERIOR, LEATHER TRIM, SEATING AREA WITH TABLE TV, MICROWAVE, REFRIGERATOR, SPEAKERS, NAVIGATION, MEDIA AIR CONDITIONING (CLIMA), 27MC AUTOMATIC TRANSMISSION WITH RETARDER, PTO, TIPPING HYDRAULICS SLIDING FIFTH WHEEL SPOILER SET, SIDE SKIRTS ALCOA WHEELS IMMEDIATELY AVAILABLE FOLLOW US ON INSTAGRAM, FACEBOOK AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS AND MACHINES FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL MÓWIMY PO POLSKU РОЗМОВЛЯЄМО УКРАЇНСЬКОЮ

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 020313L, pressure: 7 bar, Description: Solid steel construction for high machine stability. Workpiece feed via sliding transport chain with plastic plates. Upper pressure fitted with two rows of rubber-coated rollers. Manual adjustment of upper pressure with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3 mm edging rolls. Support tray for edging rolls with up to 800 mm diameter. Central dust extraction. Roller rail as workpiece support along the entire machine. Safety cover over all processing units. Control panel, including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Jointing milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable infeed fence. Maximum material removal 2 mm. 2 motors at 1.1 kW each, 12,000 rpm, max. material removal 2 mm, extraction port Ø 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with fast heating and adhesive application roller. System for temperature control and recycling of excess hot-melt adhesive. Power requirement 3.5 kW, capacity 1.5 kg, heating time approx. 15 min., depending on ambient temperature and adhesive. Hodpfx Agsxn Hzbs Njfn End trimming unit With 1 saw blade for trimming front and rear edge overhangs at a 90° angle, flush to the workpiece. Trimming for the front and rear overhangs can be controlled individually as needed. Motor: 0.35 kW. Saw blade speed: 12,000 rpm. Flush milling unit With 2 motors for milling a radius or chamfer on the top, bottom, and/or front edge. Vertical and horizontal motor adjustment on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motor not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, 0.55 kW each, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Profile scraper knife Flat scraper knife Buffing unit Technical data: Edging strip thickness (manual feed) max: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°-210° Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction nozzle Ø: 2x 60 mm CE standard

Condition: excellent (used), Year of construction: 2012, operating hours: 730 h, Edge banding machine Hebrock AKV3005DK-F with pre-milling, corner copying, and two scraper blades. Very well-maintained machine from a small workshop, in excellent condition. Touchscreen interface with PLC control for simple operation of the machine; up to 12 user programs can be saved. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 8 - 53mm Feed rate approx. 10m/min Noise reduction hood Extendable workpiece support, special feature extendable up to 950mm Extraction connection 80 + 140mm Units: Quick-change glue pot with glue outlet; two glue pots included in delivery (one used for EVA glue, one for PU glue), the PU glue pot is practically as new, only purchased for a single job. Pressure beam manually adjustable with SIKO counter Infeed fence manually adjustable with SIKO counter Edge thickness manually adjustable with SIKO counter Hsdpfxjtpn Ete Ag Njfn Pre-milling unit with Leitz Whispercut diamond cutters, still sharp Gluing station with automatic edge feeder for coil material up to 3mm Pressure zone with 4 rollers Cross-cut saw Integrated collection container for edge trimmings Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Corner rounder R2, pneumatically adjustable between thin and thick edge The profile milling unit can also be used for shelf program, that is, it only rounds the straight edge, not the corners Radius scraper blade R2, pneumatically retractable Glue joint scraper blade, pneumatically retractable Hood lock CE marking Operating manual A video of the machine in operation can be sent upon request. All reversible knives of the milling units and scraper blades have been renewed or rotated, saws sharpened. The machine is therefore ready for immediate use. Only the diamond pre-milling cutters (Whispercut) have not been replaced, but are still sharp. Paintwork touch-ups carried out. The Hebrock AKV series is the predecessor of the current K series. The machine has only about 730 operating hours (glue pot switched on), but the frequency converters were switched on for only about 455 operating hours. The machine is in very good condition, see original photos. Machine dimensions approx. 5000 x 1400 x 1550mm (LxWxH) Weight approx. 1550kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "further offers from this provider."

Condition: new, Year of construction: 2025, LAB 300 PLUS F 16 TERSA - Universal multiple combination with aluminium sliding table and three milling speeds for sawing, milling, planing/thickness planing and optional slot drilling torsion-resistant cast steel construction machine table made of grey cast iron, hardened and ground light-weight anodized aluminium sliding carriage, 10 years warranty on wear of the guideways large trimming frame with extendable aluminium telescopic fence and folding fences with combi saw fence with 45° quick adjustment max. saw blade Ø 315 mm with optional scoring device, swivels from 90°-45° helical toothed steel infeed roller for uniform wood infeed when planing thicknesses four milling speeds, manually adjustable standard with right-left rotation of the milling spindle three independent motors for each working unit scope of delivery: Combi planer/parallel fence arched cutter guard Tersa cutterhead anodized aluminium sliding carriage aluminium stop jaws folding fence eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Article-No. 5500314 Technical data ---Technical data circular saw--- circumference 1600 mm max. saw blade diameter with scoring 315 mm Hedpfx Ajcnxa Nog Njfn max. cutting height at 90° / 45° 100/79 mm max. clearance width left of saw blade 1660 mm cutting width at rip fence 800 mm saw shaft speed 3500 rpm. saw blade inclination 90° - 45 ---Technical data dressing--- working width 300 mm Dressing table length 1260 mm Ho

Condition: good (used), mileage: 847,482 km, first registration: 05/2019, fuel type: diesel, color: white, axle configuration: 6x2, tire size: 315/70R22,5, fuel: diesel, wheelbase: 4,800 mm, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, retarder, traction control, trailer coupling, = Further Options and Equipment = - 2nd Diesel Tank - Digital Tachograph - Electric Windows - Electric Mirrors - Tachograph (Control Device) - Fixed Fifth Wheel - High Roof - Auxiliary Brake System = Notes = Number of axles: 3, Configuration: 6x2, Twin tyres, Total tank capacity: 1,180 liters, 2nd diesel tank, trailer coupling, kingpin diameter: 40 DIN, chassis material: steel, fifth wheel: fixed, number of differentials locks: 1, cab type: high roof, cruise control, tachograph (control device), digital tachograph, air conditioning, electric windows, electric mirrors, radio/cassette, color: white, heated mirrors, lighting type: halogen, climate control, Bluetooth, fuel: diesel, Euro 6, transmission type: automatic, gearbox model: Traxon, gears: 12, auxiliary brake system, retarder brand: Intarder, power steering, ABS, ASR, starter battery, rotation direction: 1x20, system length: 80 cm, system type: ,,, seat configuration: 1+1, seat trim: fabric, seat adjustment: manual = Further Information = Transmission Gearbox: TRA, 12-speed, automatic Axle configuration Tyre size: 315/70R22.5 Brakes: disc brakes Suspension: air suspension Axle 1: steering; left tyre tread: 9 mm; right tyre tread: 9 mm Axle 2: twin tyres; left inner tread: 4 mm; left outer tread: 4 mm; right inner tread: 10 mm; right outer tread: 10 mm Axle 3: lift axle; left tyre tread: 5 mm; right tyre tread: 5 mm Dimensions Dimensions (L x W x H): 962 x 255 x 356 cm Functional Loading platform height: 115 cm Condition Technical condition: good Visual condition: good Damages: none Number of keys: 4 Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent traders of used vehicles. Here, you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our stock includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! Hfjdpfx Aoxgnh Tog Nen • Large, rapidly changing stock • Recognizable quality • Good pricing • Proper business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates quickly arranged • Expert technical services • Security of 'recognizable quality' • And much more... Please visit our website for special offers and the full stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 2000, Feed unit, circular saw feed apparatus for panel saws For cutting of strips, window scantlings, trimming narrow ABS edges, etc. Mounting to the circular saw fence Motor 0.14kW, 380 Volt Two feed speeds: 13 + 16m/min Integrated electric safety magnetic system fixes the feed unit to the saw table using an electromagnet Quick adjustment of workpiece height via handwheel Rubber-coated feed rollers Hfjdpfx Ajxlywweg Nen Max. workpiece height approx. 80mm Minimum workpiece length approx. 200mm Extraction connection Largely repainted CE mark Mounting rail dimensions: 41x21mm, internal dimension 31 x 11mm, groove width approx. 14mm Rail fits Altendorf but is also adaptable to many other panel saw brands; additional adapter rails are available from Panhans Weight approx. 30kg The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see 'further offers from this provider.'

Condition: new, Year of construction: 2025, Combined saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast table High-precision sliding carriage made of anodized aluminum (travel 2250 mm) Large trimming frame (900 x 600 mm) with telescopic aluminum fence extendable up to 2660 mm with professional stop flaps Max. Saw blade Ø 315 mm with scoring device, tiltable from 90° - 45 Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double cradle milling unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free gray cast iron Three milling speeds, manually adjustable from 3500 - 10000 min-¹ With right-left rotation of the milling spindle Standard arc milling protection hood Safety turning stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Connection suction Suction port diameter 2 x 120 mm Hjdpfxjhp Rdlj Ag Nofn Suction port diameter saw blade guard 60 mm Electrical data Power drive motor 2 x 5,0 kW Supply voltage 400 V Mains frequency 50 Hz Milling spindle spindle inclination 0 - -45 ° useful length of spindle 100 mm spindle speeds 3500/7000/10000 min-¹ Milling tool diameter max. not lowerable 210 mm lowerable 180 mm tenon milling 275 mm K

Condition: like new (used), Year of construction: 2022, E450PM - AUTOMATIC EDGE BANDING MACHINE V000047 LME450PM-5 with joint trimming unit Machine in excellent condition VOLTAGE 400/50/3 CONTROL WITH 7" TOUCH SCREEN EXCHANGEABLE GLUING UNIT VR - MULTIFUNCTION TRIMMING UNIT Hedpfx Aexac Hwsg Nefn Tool for straight/radius trimming TOOL KIT R=2 mm FLAT SCRAPER RELEASE AGENT UNIT LED INTERNAL LIGHTING DOCUMENTATION IN GERMAN INFRARED LAMP for panel pre-heating SCRAPER UNIT Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Holzkraft Minimax ST 5es - Maximum equipment for professionals Saw-milling combination with miter cutting device and swiveling milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Hfsdod Hx Hmspfx Ag Nen Scoring unit with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be tilted from 90° to -45 High-precision format sliding carriage made of anodized aluminum Large extension arm (1200 x 650 mm) With material roller and extendable aluminum telescopic fence up to 3300 mm Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds With right-left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch With separate saw-parallel fence and separate jointing fence for dressing as standard Equipment details: Sliding carriage with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double cradle milling unit Swiveling, made of cast iron Fixing points directly on the table, thus optimal running smoothness Milling spindle mounted far up on precision ball bearings, thus low bearing load and longest possible service life Powerful industrial motors Milling stop Heavy-duty professional version The high-quality milling fence made of cast iron is supplied with fine adjustment as standard 3-fold positionable for quick return of the setting With fine adjustment via toothed rack, numerical display and aluminum milling stop jaws Rip fence With fine adjustment and quick clamping Sturdy round bar guide made of ground steel Conveniently folds down for cutting large workpieces Reversible aluminum ruler for narrow workpieces Cast iron double weigh saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, mounted on both sides Height and up to 45° inclination adjustable Scoring unit with separate scoring motor 0.55 kW as standard Boom with angle-adjustable telescopic crosscut fence with degree raster graduation Dimensions and weights weight approx. 900 kg Connection dust extraction diameter of dust extraction nozzle 3 x 120 mm Suction port diameter saw blade guard 80 mm Drive power scoring motor 0,55 kW main motor 2 x 5,0 kW Electrical data Supply voltage 400 V Format sliding carriage and table Width of sliding table 360 mm height of sliding table 142 mm Table length 1380 mm table width 465 mm Milling spindle spindle inclination 0 - -45 ° useful length of spindle 125 mm spindle speeds 3500/6000/8000/10000 min-¹ Milling tool diameter max. lowerable 240 mm tenon milling 320 mm Circular saw unit and scoring unit trimming length 3200 mm Cutting width with rip fence 900 mm Max. Trimming width to the left of the saw blade 3300 mm saw blade inclination 90 - 45 °. Max. Cutting height 90° 104 mm Max. Cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Holzkraft sliding table saw with scoring device Cut-size circular saw with tiltable saw blade and high-quality sliding table made of anodized aluminum Cutting plane of the small-format circular saw directly on the roller table Precision-guided sliding table made of anodized aluminum, standard finish Large table arm guided on telescopic arm and longitudinally adjustable The standard table widening and table extension allow easy working with larger workpieces The large dimensioned sawing unit made of cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground cast iron, therefore extremely robust and insensitive Hsdpfx Asih Dwvsg Nofn smooth running and precise cuts Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic stop Extendable aluminum telescopic stop Angle adjustable With two professional folding fences Ek2a0i2ik Rip fence Standard with fine adjustment and quick clamping Scope of delivery: Table extension Table extension Anodized aluminum format sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data table dimensions 1020 x 325 mm table height 900 mm trim length 1660 mm cutting height max. 90° with scoring 100 mm cutting height max. 45° with scoring 79 mm max. clearance width to the left of the saw blade 1270 mm Cutting width with rip fence 900 mm saw blade inclination 90° - 45 saw blade Ø max. with scoring 315 mm saw blade Ø max. without scoring 315 mm scoring saw blade Ø (option) 80 mm Main saw blade speed 4000 min-1 Speed scoring saw blade 7600 min-1 Electrical connection 400 V / 50 Hz motor power 4,0 kW Suction nozzle diameter 120 mm Suction nozzle Ø saw blade guard 60 mm Weight 295 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, For sawing, milling, planing/thickness planing and optional slot drilling in confined spaces High-precision format sliding carriage made of anodized aluminum, various lengths Large extension arm (1200 x 650 mm) with material roller and extendable aluminum telescopic fence up to max. 3200 mm with professional fence flaps Max. Saw blade Ø 315 mm, tiltable from 90° to -45°. Large swivel range of the milling spindle from 90° to -45° backwards Four milling speeds up to 10000 min-¹, manually adjustable With right-left rotation of the milling spindle Heavily ribbed dressing tables made of stress-free gray cast iron for decades of stability and flatness 2-stage feed for thickness planing Three independent industrial motors for continuous operation With lockable main switch, motor protection switch Fixed hand wheels Dimensions and weights Weight (net) approx. 857kg Dressing table Dressing table width 410mm Dressing table length 2000mm chip removal max. dressing 5mm Connection suction Suction port diameter 3 x 120mm Suction port diameter saw blade guard 60mm Installation information Required space length 5960mm Space requirement width/depth 5140mm Explanation of space requirements The dimensions take into account maximum travel distances or useful lengths. Working area length 1600mm Working area width/depth 1600mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Thickness Thickness table length 757mm Thickness table width 423mm Working height thickness min. 3mm Hfsdsih Dxlepfx Ag Njn Working height thickness max. 230mm Chip removal max. thickness 5mm Electrical data Supply voltage 400V Mains frequency 50Hz Rated operating mode drive motor S6 Duty cycle drive motor 40% Power drive motor 3 x 5,0kW Sliding carriage and table sliding table length 2660mm Format sliding carriage width 360mm format sliding carriage height 142mm table length 1250mm table width 430mm table height 900mm Milling spindle spindle inclination 0 - -45 spindle mandrel diameter 30mm useful length of spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min⁻¹ Milling tool diameter max. Tool diameter max. lowerable 210mm tool diameter max. lowerable 45° 150mm tool diameter max. tenon milling 275mm Planer cutterhead Type of cutterblock TERSA planing shaft diameter 87mm Number of planing knives 4pcs planing shaft speed 5200min-¹ Circular saw unit trimming length 2600mm Cutting width with rip fence 900mm Max. Cutting width left of saw blade 3260mm saw blade inclination 90 - 45 Max. Cutting height at 90° 90mm Max. Cutting height at 45° 63mm Max. Saw blade projection 90° 100mm Max. saw blade Saw blade projection 45° 71mm Diameter (main) saw blade 315mm Explanation Diameter (main) saw blade with scoring device Speed (main) saw blade 4000min-¹ Feed rate Feed speed 6 - 12m/min Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, The Hebrock K 36 Top equipment with motorized adjustment - Exhibition piece - New machine - - immediately available - This Hebrock endurance racer offers unimagined possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in daily use. With the option of equipping the machine with a step cutter and a multi-radius scraper, Hebrock is setting new standards in the field of perfect edge processing of various edge thicknesses. max. edge thickness: 3 mm max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 60 mm Min. workpiece length approx. 140 mm Feed speed approx. 15 m/min. Ready for operation approx. 6 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 5250 x 1230 x 1430 mm (LxWxH) Weight 1750 kg Equipment: Hebrock K 36 - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touch screen), hot melt adhesive application to the workpiece workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 3 mm routing depth, maintenance-free, coated glue tray with HF double-motor cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with pneumatic trimming adjustment and interchangeable panel trimmer (combi version), corner rounding trimmer, radius scraper, surface scraper (incl. cleaning station, robust chain drive, ball-bearing mounted double roller top pressure, unit viewing window from the rear of the machine and operator side, signal lamp for workpiece sequence, extendable workpiece support, feed approx. 15 m. support, feed rate approx. 15 m/min, gluing up to 60 mm workpiece thickness 36/08/1 Quick-change equipment for corner router Hedpfx Aji Am Uksg Nofn 36/08/2/1 additional exchangeable motor corner router R=1 36/09/1 Multi-radius scraper 36/24/1 Release agent spraying device 36/24/2 Cleaning agent spraying device 36/25 Protective spraying edge 36/27 Nesting (1x milling station + 1 x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/bevel) 36/45 Axis package Motorized adjustment of panel, edge thickness and joint milling depth jointing depth adjustment Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. Hfsdpfx Aji Anadeg Non max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: ex stock 54634 Bitburg Available in calendar weeks: 4/2024

Year of construction: 1985, condition: excellent (used), Edge gluing press for veneer, solid wood and plastic, model HFK 2200, for trimming edges during press time. When using heat-curing glue, we achieve pressing times of 20 to 30 seconds for veneer edges. Maximum working size approx.: 1,400 x 2,500 mm Heating: 1.7 kW Electro-pneumatic edge press Haug HFK 2200 for pressing edging material onto wood, with heating. 3 table extensions Hedpfx Aew Apqqjg Nefn Swiveling work table Location: ex stock 54634 Bitburg - immediately available -