Used Truing Device for sale (12,490)

Year of construction: 1992, condition: good (used), Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turntable and tilting table, welding turning device, welding turntable tilting table -Manufacturer: Commercy Soudure, welding rotating device swiveling -Type: PM 250 -Load capacity: see photo nameplate -Control: with foot pedal -Three-jaw chuck: Ø 314 mm, bore Ø 100 mm, base plate Ø 600 mm -Speed: max. 3 rpm right/left rotation -tiltable: via crank -Transport dimensions: 1190/720/H900 mm -Total weight: 267 kg Crjdpfx Ajq Ei A Tedasi

Condition: used, Year of construction: 2020, This filter and cooling unit was previously used for two Starrag Heckert machining centers (lot 2770011 and 12) Order number: 2153651 Control voltage: 24 V DC Connection voltage: 3×400 V + PE / 50 Hz Connected load: 6.30 kW Fuse: 50 A Crjdexuf R Ispfx Adaoi Country of manufacture: Germany Additional unit: Manufacturer: BKW GmbH, Wolfschlugen Model: WRK3C-2KK2P Year of manufacture: 2005 Refrigerant: R134a Permissible operating pressure: 24 bar Voltage: 400 V / 50 Hz Power: 5.02 kW Control voltage: 24 V DC Country of manufacture: Germany

Condition: good (used), used copying unit Copymat, type 1301A2 Crodpfx Adoipibqoaei

Condition: new, Year of construction: 2022, Suction nozzle diameter: 200 mm Nominal flow rate: 2800 m³/h Cjdpov R U H Usfx Adaeri Chip bag capacity: 2 x 120 l Filter cleaning: manual Motor power: 2.2 kW Dimensions: 1500 x 500 x 2100 mm (L x W x H) Weight: 53 kg

Condition: good (used), Year of construction: 1997, Measuring device for determining the amount of gas in the insulating glass Dimension: Length: 280mm Width: 204mm Height: 180mm Crodei Azc Ajpfx Adaei Weight: 5.7kg

Condition: ready for operation (used), Year of construction: 2000, Suction unit: 16, load capacity: 1200kg, crane eyelet: 90mm/160mm, suction pad diameter: 315mm, suction pad type: P200-50, suction pad swivel: 6°, height compensation: 50mm, number of vacuum gauges: 5, vacuum gauge diameter: 100mm, pump capacity: 25m³/h, vacuum pressure: 850mbar. Machine dimensions X/Y/Z: approx. 8500mm/900mm/1500mm, weight: approx. 720kg. Documentation available. On-site inspection possible. Credpfx Adexuvnwsasi

Condition: good (used), Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turntable and tilting table, welding turning device, welding turntable tilting table -Welding turning device: turning length 3130 mm -Turntable: Ø 800 mm -Drive: Servo Motor 1/1.6 kW with cooling, see photo nameplate -Rotation direction: right/left rotation -Transport dimensions: 3890/900/H1420 mm Crjdjxm Sqropfx Adaoi -Weight: 880 kg

Condition: used, Year of construction: 2019, • Type: Assembly System for Rubber Bearings • Model: AMG HAT X290 Hybrid + E-Class (Station 314) • Year of Manufacture: 2019 • Power Supply: 400 V / 50 Hz • Control Voltage: 24 V • Power Rating: 22 kVA • Control System: Siemens SIMATIC HMI with touchscreen interface • Integrated Lubrication System: microjet GmbH Minimal Quantity Lubrication System • Included Equipment: – Complete control and drive system – Various hydraulic and mechanical joining units – Tooling and fixture sets for different bearing types – Pneumatic control unit with multiple valve blocks Crsdpfxoxufqbs Adaei – Worktable and component storage rack

Condition: used, Type: Struers Labotom-3 with Cooli-1 Cooling System Struers Labotom-3 with Cooli-1 Cooling – Complete Cut-off Saw System Description For sale is a complete Struers cutting system, consisting of: - Struers Labotom-3 cut-off machine (Type 05326146) - Struers Cooli-1 cooling and control unit (Type 05761116) Ideal for precise wet cutting of metallic, ceramic, and other materials in laboratories and materials testing. Technical Data – Struers Labotom-3 (05326146) Feature / Value Motor type / Power: Three-phase motor, 3.2 kW (at 50 Hz) / 3.0 kW (at 60 Hz) Speed: approx. 2,845 rpm (50 Hz) / 3,450 rpm (60 Hz) Cutting disc: Ø 250 mm × 1–1.5 mm × 32 mm (bore) Cutting capacity: up to approx. Ø 90 mm (depending on material) Working table: 200 × 215 mm with three 10 mm T-slots Safety features: Lid interlock, automatic shut-off when opened, thermal protection Noise level: approx. 64 dB(A) in idle mode Connection: 3-phase 400 V / 50 Hz Codoxmh Tcopfx Adaori Dimensions (W × D × H): approx. 651 × 645 × 410 mm Weight: approx. 80 kg Technical Data – Struers Cooli-1 Cooling & Control Unit (05761116) Feature / Value Function: Control and supply of coolant pump for wet cutting operation Pump capacity (system-dependent): 60–125 L/min at approx. 1 bar Power supply: 1~ 230 V / 50 Hz Dimensions (W × D × H): approx. 226 × 166 × 128 mm Compatibility: specifically designed for Labotom-3, also compatible with Secotom series Important note: "The table shown in the photos is not included in the scope of sale." Scope of delivery - 1 × Struers Labotom-3 cut-off machine (Type 05326146) - 1 × Struers Cooli-1 cooling & control unit (Type 05761116) - Connecting cables & accessories (as shown in the photos) Shipping / Collection Total weight: approx. 85–90 kg Shipping: via freight forwarder on pallet (possible by arrangement) Collection: preferred, by appointment Location: Borken/Westf. Condition: used (Specifications and technical data are subject to change and may contain errors!) For further questions, please feel free to contact us by telephone.

Condition: new, Year of construction: 2025, Suction nozzle diameter: 200 mm / 2 x 100 mm Nominal flow rate: 1900 m³/h Cedpfev N Tydsx Adajri Chip bag volume: 1 x 110 l Filter cleaning: manual Motor power: 1.5 kW Machine height: 1000 x 500 x 2100 mm (L x W x H) Weight: 39 kg

Condition: used, functionality: fully functional, The hot runner device CW 662 is a 6-way device from YUDO and is for sale, of course with a BA for the device. Crjdov Smmcjpfx Adaji

Condition: used, Mechanization Credpfx Aor Eh Uhedasi Infeed loading device consisting of 1 x conveyor belt with stop and pusher 1 x roller conveyor 1 x cross slide drive unit by means of servomotor For example, ideal for: A) In front of a planing machine with multi-blade saw B) In front of resaw or other saw C) At the infeed of other machines Condition as is and without electric control Electric control on request and at extra cost.

Condition: excellent (used), Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turntable and tilting table, welding turning device, welding turntable tilting table -Welding rotating device: pivoting with forming gas line in the center, foot switch Crodpsw Nygujfx Adaoi -Control: Ess Type PS3E -Turntable: Ø 450 mm -Holder: four-jaw chuck Ø 400 mm -Spindle bore: Ø 62 mm -Dimensions: 780/600/H910 mm -Weight: 190 kg

Condition: excellent (used), 1.0 pcs. dosing unit (two components can be dosed) Manufacturer: MOVACOLOR Crodpfoxqzkpsx Adaei Type: The Balance There are 3.0 pcs. dosing units available.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 Csdpfsxqxw Tox Adajri - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. #8312-2

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag Crsdpfjcnw U Dox Adaei unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: new, Year of construction: 2025, functionality: fully functional, ASB length stop with digital display Measuring range: 1,000 mm / 1,500 mm / 2,000 mm / 2,500 mm / 3,000 mm ... up to 6,000 mm Manual length measuring device with battery-powered digital display and fixed end stop. Right-hand mounting (left-hand option available) Measuring accuracy: ±0.1 mm Total length: Measuring length + 350 mm LCD display permanently integrated Display powered by batteries with an approximate service life of 1,000 hours in continuous operation Minimal installation effort required Codpfoxu Iaxox Adaeri Freely configurable set values Switchable between absolute and relative measurement modes

Condition: used, Year of construction: 2006, The Neolt FT250 Manual Foam Trim Pro 250, manufactured by Neolt in 2006, is a machine with a format of 2500 mm currently in stock and located in Germany. This machine comes with a fixing bar and stand, offering a cutting width of 98 inches. It can handle a maximum cutting thickness of 30mm for foam and 3mm for Forex. The delivery terms are FCA. Format: 2500 mm Max. Size: 250 cm Net Weight: 70 kg Measurements: 280 L 33 W 120 H Equipment: with Fixing Bar and Stand 98 in Cutting Width, 30mm FOAM and 3mm FOREX Max. Cutting Thickness Crjdpfx Aevfx Dmodasi

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. Cjdpfxexqxt Ie Adaori The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: new, Year of construction: 2025, Description: IE 3 motor standard max. volume flow up to 8.500 m³/h at the fan Codpscqy I Sofx Adasri approx. 73 m² filter surface, residual dust content according to H3 Pre-separator standard 71 dB (A) at full load (according to DIN EN ISO 11201) already complies with prEN 16770 Optional: Models with type-tested rotary valve (FSA) Tested back pressure flap Integrated automatic venting system Intake port: 350 mm Nominal motor power: 11 KW Voltage: 400 V/ 50 HZ Max. volume flow: 8500 m3/h Nominal volume flow: 6927 m3/h Negative pressure at Vnom. 2765 Pa Filter area: 73 m2 Spa collection volume: (net/gross) 3x165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (LxWxH) 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock 54634 Bitburg

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016 Credpfx Adjvfxqysaji

Condition: excellent (used), Year of construction: 2020, Pneumatic Double Diaphragm Pump Cobra 40-10 Top condition – Year of manufacture: 2020 Its unique design enables low-pulsation operation. Consistent paint flow for a perfect spray pattern and highest surface quality. Ideally suited for processing shear-sensitive and moisture-sensitive materials. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for handling small material volumes and frequent color changes. Scope of delivery: Basic unit on frame, HD double hose 7.5 m, upper container 5 l Ex, AirCoat spray gun AC 4600 Professional including red air cap and holder, AirCoat nozzle ACF 3000 11/40. Technical Data: Ratio: 40:1 Displacement per double stroke: 10 cm³ Flow rate at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Cjdpfxoxdtkuo Adajri Extremely low hours of use –

Condition: new, Year of construction: 2025, Al-Ko clean air dust extractor year 2024 Exhibition piece - Immediately available Absolute special price Technical data Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3 Ph Csdjcdy I Ropfx Adajri Voltage: 400 V / 50 Hz Max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Clean Air Dust Collector RLA 160 For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft For wood shavings and dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet Crsdocnw T Ispfx Adasi Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Can also be used for multiple dust sources High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bags System delivered fully assembled, allowing for quick deployment Mobile Filter description Ultra-compact with maximum filter area Filter material made of polyester fleece Aluminum-coated, washable, and therefore with a long service life. Filter comes standard with an antistatic design, tested and approved according to category M-BIA. Filter resistance monitoring via differential pressure cell, adjustable via a warning light on the control box. The fan is installed downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan impeller. Inspection opening for cleaning the bypass filter. 5 m connection cable with 5-pin CEE plug and phase inverter. 2 fixed and 2 swivel casters with parking brake. Manual cleaning. Model RLA 160 Item no. 5131620 Technical Specifications Intake manifold diameter 160 mm Nominal flow rate 1448 m³/h Max. flow rate 2400 m³/h Valve pressure at Vnenn 2247 Pa Filter area 9.21 m² Filter material dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning Compressed air supply Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (length x width x height) 1681 x 830 x 1654 mm Weight 254 kg Location: Ex warehouse 54634 Bitburg

Condition: excellent (used), Year of construction: 1998, Used Scheppach RG 4000 dust extractor - dust-tested Technical specifications Hose length: 2500 mm Csdpjwb Hqxofx Adaori Hose connection diameter: 100 mm Motor power: 1.5 kW, 50 Hz / 400 volts Mobile Extraction drum Availability: Immediately Storage location: 54634 Bitburg