Used Undercut for sale (35)

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device - Upper safety pressure device (pneumatic protective hood) Ibjdpfxofhbuye Aggja - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 401 Aluminyum Pvc Alttan Çıkma Kesim Makinası, functionality: fully functional, • Complies with CE standards. • Performs precise cutting at 0 - 180 degrees and intermediate angles. • Quick setting stops for 15, 22.5, 30, 45, 60, and 90 degree angles. Iedeq U Tctopfx Aggsba • Table locking lever for intermediate angles. • Saw output speed regulator reduces speed when cutting aluminium, decreasing motor load. • Safety guard for secure cutting. • Diamond saw blade diameter: 450 mm, output distance: 12.5 cm. • Standard with measurement and transport conveyor (2.5 metres right and left). OPTIONAL • Cooling system and Hydro check system available for aluminium cutting. • Capability to work with a digital meter.

Condition: good (used), Year of construction: 1995, functionality: fully functional, saw blade diameter: 400 mm, max blade diameter 400 mm cutting height adjustment angle adjustment 0″- 45″ spindle diameter 30 mm Ibsdpoqwduxefx Aggsa blade guard max. cutting width with guide bar 1270 mm 2 types of rotation speed 3000 / 4500rpm table top dimensions 1020 x 1120 mm worktop extension worktop extension undercutter max diameter of undercutting saw blade 130 mm diameter of undercutter spindle 20 mm undercutter motor 0,75 kW motor 4 kW overall dimensions L/W/H 2930 x 2600 x 1450 mm weight 711 kg

Condition: ready for operation (used), Year of construction: 1990, MARKON Log house drilling machine with undercutter year 1990 manufacture Markon Lathi / Finland Length = 3550mm Width= 1500mm Height= 2910mm Engine power Drilling unit: 6 x 3 kW moulder: 1 x 5.5 kW Dimensions of the log to be pushed Height max 250mm Height min 130mm Width max 250mm Width min 60mm Length min 600mm Ijdsfw Rt Rjpfx Aggjba Tool sizes and speeds Drill max diameter 40 mm Moulder max diameter 250 mm Drill length 325 mm Drill mounting arm diameter 20h7 mm Drill rotation speed 2880 rpm Moulder: rotation speed 2880 rpm AIR Suction openings dia. 160 mm 2 suction openings Drill unit suction opening diameter 90 mm Suction openings 6 pcs Air speed at the suction opening 30 m / s Air consumption 8460 m3 / h electrical connection Total power 380 V 24 kW Compressed air connection Minimum pressure 6 bar Drilling unit air demand / stroke "48 1 Total air demand ~ 2200 1 / min incl. 3,5 meter roller conveyor + 12 drillings

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm Iedpfezuwyzox Aggoba 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Year of construction: 2025, operating hours: 225 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VAUZ1973LZT031244, Liebherr Telescopic Handler T 33-10, Generation 6 For sale is a Liebherr telescopic handler T 33-10, originally owned, acquired as new from an authorized Liebherr dealer. Used exclusively in biogas and substrate logistics. Maintenance performed according to manufacturer specifications throughout, records available. ENGINE AND DRIVE - Deutz TCD 3.6 L4, 4-cylinder inline engine, water-cooled, turbocharger with intercooler - 105 kW / 143 hp, 3.6 l displacement, 500 Nm at 1,600 rpm Ibodpfsztakyex Aggsa - Emission stage EU V / Tier 4f, electronic common rail fuel injection - Hydrostatic closed-loop drive, infinitely variable - Permanent all-wheel drive, 45% limited-slip differential in the front axle - 3 electronically adjustable steering modes, full lock in 3.5 turns - 20 km/h, 41 kN traction force, reversible fan drive LIFTING AND WORKING HYDRAULICS - Max. load capacity 3,300 kg, lifting height 9,747 mm, reach 7,176 mm - Load capacity at max. lifting height 1,500 kg, at max. reach 300 kg - Working hydraulics 106 l/min, single-lever control via multi-function joystick - Lowering brake valves on lifting, tilting, and telescopic cylinders - Auxiliary work circuit on the telescopic head, adjustable flow rate - Hydraulic quick hitch Liebherr Compact and Stereo - Tilting kinematics 126.4°, telescopic cylinder with end-of-stroke damping CABIN - Elastomer mounting, integrated ROPS/FOPS structure internally - Tinted safety glazing front and roof, one-piece windshield wiper - Windshield washer system front and rear, rear window tilting - Driver's door with opening window, lockable when open - 3-stage fan with fresh air intake and filter - Steering column tilt adjustable via foot pedal, driver's seat with artificial leather upholstery SAFETY AND EQUIPMENT - Overload warning device EN 15000 with automatic shut-off, audible/visual - Hill start assist Auto Hill Assist, level adjustment via the front axle - Battery main switch with automatic battery disconnection - Air filter with automatic dust extraction - Central lubrication system, tool-free access to telescopic cylinder lubrication - Work spotlights 2x front, 2x rear, display matrix - Liebherr hydraulic oil HVI (-20 to +40 °C) - Tires Firestone Duraforce-Utility 460/70 R24 INCLUDED ACCESSORIES All attachments fit the hydraulic Liebherr quick hitch and were acquired new along with the machine. - Pallet forks detachable - Fixed pallet fork, load capacity 3.6 t, fork length 1,200 mm - Light goods bucket LSB 3.0 m³, width 2,500 mm, undercutting blade, overflow guard, wear strip hardened steel 400 HB (bulk density max. 0.2 t/m³) - Lattice boom extension 3.9 m - Front sweeper FKM 2.4, working width 2,500 mm, mounting plate CAT 2, hydraulic dirt collection container, splash guard, parallelogram mounting system with pivot joint, mechanical adjustment via locking lever, height adjustment via fine-step locking system, polypropylene sweeping roller also suitable for snow removal, 3 heavy-duty swivel rollers, support legs, lashing eyes TRANSPORT DIMENSIONS Length 5,104 mm, width 2,327 mm, height 2,465 mm, operating weight 8,050 kg SCOPE OF DELIVERY Operating manual digital (MyLiebherr) and printed in German, emergency kit, lifting cylinder support, complete maintenance history Inspection by appointment. Sale from commercial to commercial, price net plus statutory VAT. Transport can be arranged upon request.

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. Ibsdpfx Ajq Ii Dljggja - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, Year of construction: 2000, operating hours: 3,273 h, machine/vehicle number: 15015702974, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, torque: 130 Nm, controller manufacturer: Heidenhain 426/430, workpiece weight (max.): 350 kg, total height: 2,724 mm, total length: 2,756 mm, total width: 2,020 mm, table width: 500 mm, table length: 700 mm, rotary table diameter: 700 mm, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, 5-Axis Machining Center DECKEL MAHO DMU 70V We offer for sale an advanced, universal vertical machining center, the Deckel Maho DMU 70V (part of the renowned DMG MORI group), equipped with a numerically controlled (NC) rotary/tilting table. The machine features a compact and robust design, minimizing its footprint in the production hall while offering full capabilities for advanced 5-axis machining. AXIS SPECIFICATIONS AND WORKING AREA • Axis travel (XYZ): X = 710 mm | Y = 520 mm | Z = 520 mm • Working travel: 710 mm (X) / 520 mm (Y) / 520 mm (Z) INNOVATIVE NC ROTARY/TILTING TABLE (4th and 5th AXIS) • Mounting surface dimensions: ∅ 700 mm x 500 mm (practical design with factory-cut sides, facilitating optimal mounting of vises and fixtures) • Maximum table load: 350 kg (full mechanical safety of the gearbox, bearings, and measuring system) • Axis rotation range: • C-axis (rotation): continuous / multi-rotation operation (advanced trochoidal milling strategies) • B-axis (tilting): wide working range of over 180°, providing excellent access to the workpiece and freedom for angled undercutting MAIN DRIVE AND SPINDLE • Spindle speed: continuously (steplessly) adjustable in the range of 20 – 12,000 rpm Isdpfx Agozumh Ijgjba • Spindle power: 15 kW • Maximum torque: up to 130 Nm (powerful cutting force guaranteeing excellent stiffness and stability during heavy rough machining of hard materials) CONTROL SYSTEM AND TOOL MAGAZINE • Control system: Reliable and widely appreciated by operators, the Heidenhain 426/430 (simple dialog programming, intuitive menu) • Tool magazine: Automatic, compact chain-type magazine with a capacity of 32 positions (fast tool change in automatic cycles) LOGISTICAL AND CONNECTION PARAMETERS • Overall dimensions of the machine ready for operation (with chip conveyor): • Length: 2756 mm • Width: 2020 mm • Transport height: 2724 mm (the machine fits easily on standard trailers and passes through conventional hall doors) • Total machine weight: approx. 5,500 kg • Maximum power consumption (connection): up to 42 kVA • Input voltage: 400 V (AC - three-phase current) • Current protection (fuse): 63 A • Power supply frequency: 50/60 Hz MACHINE CONDITION AND ADDITIONAL INFORMATION The machine is in good technical condition, regularly serviced and maintained. It is ideally suited for both serial production and tool shops producing complex molds, dies, and precise 5-axis parts. The machine comes complete with a chip conveyor.

Condition: used, Shearing/Punching Machine PEDDINGHAUS 210 SUPER 11 Throat depth: 305 mm Maxi punching capacity: 40 T Power: 3 kW Punching capacity: Ø 20 x 15 mm - Ø 90 x 5 mm (see abacus) Shearing capacities: (see abacus) Round shearing: Ø 34 mm Square shearing: 30 x 30 mm Angle shearing capacity: 100 x 10 mm 1 side for shearing/undercutting - 1 side for punching Delivered with some punches Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1800 mm Ibedjzmwnpepfx Aggoa Weight: approx 1,2 T

Condition: new, The powerful, mobile welding fume extractors AL-KO CLEAN UNIT F are the ideal solution for extracting welding fumes during manual welding, at automated welding stations, or with welding robots. Function: The welding fumes generated at the welding site are captured via extraction arms and hoods, among other means, and conveyed through a duct to the inlet of the AL-KO CLEAN UNIT F. In a large pre-separation chamber, coarse particles are first separated out. The subsequently arranged filter cartridges of dust class “M” filter out the remaining fine dust particles. During extraction operation, the differential pressure-controlled filter cleaning system removes adhering particles from the filter cartridges. Venturi nozzles on the filter cartridges maximize the cleaning efficiency, ensuring consistently high suction power and a long filter service life. A volumetric flow monitor continuously controls the required suction capacity and issues a warning if the nominal value is undercut. The collected dust is gathered in an easily mobile container. The cleaned air is recirculated into the room via the top of the unit. Applications: - For all welding applications with unalloyed or low-alloyed steel - Usable as extraction at individual welding stations and at duct systems with several extraction points - Extraction at fixed-position hoods and welding tables Ijdpfxjwwkvqs Aggeba Advantages: - Consistently high suction power thanks to an efficient fan and long-life cleanable filters - Extremely quiet due to high-performance sound insulation - Suitable for individual welding stations and for connection to duct systems - IE3 motors for high energy efficiency - Wide performance range - Optional accessories for various welding applications

Condition: like new (used), Year of construction: 2019, functionality: fully functional, SCM TF130ps Undercut Spindle Moulder Spindle diameter: 40mm Longitudinal carriage in the worktable Total spindle length: 180mm Main motor power: 7kW Spindle speed change via belt drive: 3000/4500/6000/7000/10000 rpm Spindle rotation: left and right Manual spindle lifting Ijdjzlw Rnjpfx Aggeba Technical documentation Year of manufacture: 2019

Condition: used, Year of construction: 2026, functionality: fully functional, Sharpening device for drill bits made of HSS or any other hard metals, ensuring precise grinding and easy handling. Adjustable tip angle in the 90°–135° range. This model is equipped with an additional slot for sharpening undercuts. Machine features Iedpszp Ea Ejfx Aggoba Precise grinding and convenient handling. Sharpening drill bits with ease. Portability due to its modest dimensions. Dressing wheel promising superb efficiency. Fully equipped; with a handle inside the device. Additional slot for sharpening undercuts. Technical data Drill bits diameters capability ø2–13 mm Angle of the tip 90°–135° POWER 120 W / 230V Motor speed 4800 rpm Approx. weight 9 kg Dimensions 330 x 170 x 160 mm PLEASE NOTE!!! This machine is a returned item; it is second-hand but in working order. NO WARRANTY AND NO RETURNS!!

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, CNC control HEIDENHAIN TNC 640, 15" Main computer MC Controller unit CC Keyboard TE 15" TFT color flat screen with softkeys RAM: 4 GB Hard disk: 32 GB, of which at least 21 GB program memory Input resolution / display increment linear axes: up to 0.1 µm Input resolution / display increment rotary axes: up to 0.0001° Input range: max. 99,999.9999 mm or 99,999.9999° Circular interpolation in 3 axes with tilted machining plane Helical interpolation Linear interpolation in 5 axes Block processing time: 0.5 ms Ethernet: 2 x 1000BaseT USB: 1 x front USB 2.0, 4 x rear USB 3.0 Handwheel HEIDENHAIN HR510 Axis selection via buttons / softkeys Buttons for continuous axis movement Emergency stop button Magnetic attachment Enable buttons / dead man's buttons according to CE Travel ranges X-axis / longitudinal axis: 4,000 mm Y-axis / transverse axis: 2,500 mm Z-axis / vertical axis: 1,300 mm Feed / connection / pneumatics Max. feed rate interpolating axes: 40 m/min Installed power: 60 kVA Max. power consumption: 150 A Air requirement pneumatics: 400 Nl/min Working pressure pneumatics: 6 bar Machine table / floor plate Machine table recessed, with leveling units Table size: 2,500 x 4,000 mm Table height: 300 mm Load capacity: 10 t/m² T-slot width: 28 H12 mm T-slot spacing: 250 mm Milling head / universal milling head Universal milling head with continuous movement in 2 axes 5-axis machining Direct drives for rotary axes Rotary axes as interpolated CNC axes Automatic tool clamping Undercut machining up to 10° possible Integrated cooling of the torque motors and spindle bearings C-axis swivel range: +/- 270° A-axis swivel range: +/- 185° Max. speed A/C axes: 30 rpm Working torque A/C axes: 450 Nm Clamping torque axes: 1,400 Nm Positioning accuracy A/C axes: 8 arcsec Positioning repeatability A/C axes: 4 arcsec Main spindle Spindle power S1 / S6: 22 / 33 kW Spindle torque S1 / S6: 84 / 128 Nm Max. spindle speed: 18,000 rpm Constant power: 2,500 - 18,000 rpm Constant torque: 10 - 2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping for electric spindle Isdoyrndmopfx Aggoba Software / calibration Dynamic RTCP software AUTOCAL software for automatic calibration 3D Form Inspect M&H software Software for measuring 3D shapes, tools, molds and dies Measurement program creation directly via coordinate points / surface points Vibration / collision monitoring Sensor for detecting vibrations Detection of collisions and excessive vibrations on 3 axes Reaction time approx. 1 ms Electronic interface for functional testing Tool changer Tool changer with arm for tool changes Overlapped-wheel design Full enclosure for operator safety Tool positions: 80 Max. tool diameter: 75 mm Max. tool diameter with free adjacent positions: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm for 40 tools Max. tool length: 250 mm for 40 tools Tool type: HSK-A63 DIN 69893

Year of construction: 2011, condition: reconditioned (used), functionality: fully functional, HSS discs, Ø 350 mm – thickness 2.5 mm – number of teeth 280 – tooth pitch 4 mm. Ibedpfezl Ub Dsx Aggea Three-phase motors with 2 speeds, 2.2/1.4 kW – 1440/720 rpm – 230/400V – 50 Hz Direct motor-to-disc drive Disc arbor, Ø 32 mm Blade rotation at 4 different speeds (15 – 30 – 45 – 90 rpm) Pneumatically rotating worktable from 90° to 45° inwards Head with vertical sliding movement on a linear guide First head, fixed Second head, mobile: automatic positioning with manual override option Positioning speed (automatic) of the mobile head: 20 m/min Positioning accuracy of the mobile head: +/- 0.1 mm Roller conveyor for the mobile head (3 m) Minimum cutting length between the two heads: 480 mm Maximum cutting length between the two heads: 5000 mm Manual kit for undercutting Oleopneumatic disc feed (adjustable feed speed – rapid approach and retraction)

Condition: new, Year of construction: 2026, The CORMAK ZX 7055 VARIO DRO milling and drilling machine is a high-performance universal machine designed for drilling, milling, and tapping operations in steel and cast iron. Its robust cast-iron construction, continuously variable spindle speed control in two ranges, and digital position readout system ensure high accuracy and repeatability in single-piece and small-batch production. Main Advantages of the Machine Rigid cast-iron base and column – provide excellent stability during machining of demanding workpieces, reduce vibrations, and extend tool life. Continuously variable spindle speed control in two ranges: Low range: 75–438 rpm High range: 438–2500 rpm Allows optimal selection of cutting parameters depending on tool diameter and material. 2-axis digital readout system (DRO) – enables fast and accurate positioning while reducing setup time and eliminating reading errors from manual scales. Automatic spindle feed – ensures smooth cutting performance and reduces the risk of drill breakage during deep drilling operations. Thread cutting function – after reaching the preset tapping depth, the spindle automatically reverses direction. Ground gears – provide quiet transmission operation and stable spindle torque. Dovetail slideways on machine axes – ensure precise table movement and accurate geometry. Rotating head ±90° with height adjustment – allows easy execution of angled machining operations, chamfers, and undercuts. Left/right spindle rotation – enables safe tapping and tool withdrawal. Efficient cooling system – effectively removes heat from the cutting zone, prevents overheating of tools and material, improves machining accuracy, and extends cutting tool life. The core of the machine is a heavy cast-iron structure with wide guideways, minimizing deflection during face and end milling operations. The large cross table provides a spacious working area and features a precisely ground surface to ensure accurate workpiece positioning. The spindle with an MK4 taper is driven by an S1/S6 1.5/1.8 kW motor with variable speed control. The integrated cooling system stabilizes the cutting temperature and improves the quality of machined surfaces. The combination of a 2-axis DRO system, ground gears, and rigid guideways provides excellent dimensional repeatability and high surface finish quality. The automatic spindle feed and two-speed spindle range allow optimal machining parameters for: drilling in steel up to Ø32 mm, drilling in cast iron up to Ø45 mm, face milling up to Ø80 mm, end milling up to Ø28 mm. Standard Equipment Variable spindle speed control 2-axis digital readout system (DRO) Ø80 mm milling cutter head with inserts Drill chuck Cooling system Technical Specifications Parameter Value Maximum drilling capacity – cast iron (HT200) 45 mm Maximum drilling capacity – steel 32 mm Maximum face milling diameter 80 mm Maximum end milling diameter 28 mm Working table dimensions 820 × 240 mm Table travel (X/Y) 595 / 185 mm Maximum tapping capacity M24 Spindle taper MK4 Motor power (S1/S6) 1.5 / 1.8 kW Ibsdpfxjyapyro Aggoa Low spindle speed range 75–438 rpm High spindle speed range 438–2500 rpm Spindle travel – manual 107 mm Spindle travel – automatic 100 mm Distance spindle axis to column surface 250 mm Maximum distance spindle nose to work table 445 mm Net weight 350 kg Overall dimensions 1084 × 924 × 1550 mm Height with base 2150 mm

Condition: new, Year of construction: 2026, CORMAK ZX 7055 VARIO Milling and Drilling Machine Main Advantages Rigid cast iron base and column – ensures stability when machining demanding workpieces, reduces vibration, and extends tool life. Variable spindle speed control in two ranges: 75–438 rpm (low range) and 438–2500 rpm (high range) – allows optimal parameter selection according to tool diameter and material type. Automatic spindle feed – provides consistent cutting performance and reduces the risk of drill breakage during deep-hole drilling. Tapping function – once the preset thread depth is reached, the spindle automatically switches to reverse rotation. Ground gears – ensure smooth and quiet gearbox operation with stable spindle torque. Dovetail guideways on all axes – provide precise table movement and reliable machine geometry. Swiveling head ±90° with height adjustment – facilitates chamfering, undercutting, and angular machining operations. Forward and reverse spindle rotation – enables safe tapping and tool withdrawal. Efficient cooling system – effectively dissipates heat during machining, prevents overheating of both the tool and workpiece, and improves machining accuracy and tool life. Standard Equipment Variable spindle speed control Electrically powered spindle head height adjustment Coolant system Technical Description Heavy-Duty Cast Iron Construction The robust cast iron construction forms the foundation of the machine’s durability and precision. The ZX 7055V DRO milling and drilling machine maintains excellent stability even during the most demanding operations. The machine features continuously variable spindle speed adjustment in two ranges: Low range: 75–438 rpm High range: 438–2500 rpm Large Cross Table with Precision-Ground Surface Attention to detail is a key design feature. The large cross table with a precision-ground surface ensures excellent flatness, resulting in highly accurate machining. Dovetail Guideways Innovative dovetail guideways provide smooth and precise movement along all three axes, enabling outstanding machining results without compromise. Forward and Reverse Rotation Adapt the machine to your requirements. The ability to rotate the spindle in both directions provides additional flexibility during machining operations. Swiveling Head ±90° and Adjustable Head Height Ibedpfx Agozd R Eisgoa Handle a wide variety of machining tasks thanks to the ±90° swiveling head and adjustable head height. Achieve precise results under all working conditions. Optional Machine Base A machine stand/base is available as an optional accessory. Technical Specifications Parameter Value Maximum Drilling Capacity Cast Iron (HT200) 45 mm Steel 32 mm Maximum Face Milling Capacity 80 mm Maximum End Milling Capacity 28 mm Table Size 820 × 240 mm Table Travel (X/Y) 595 / 185 mm Maximum Tapping Capacity M24 Spindle Taper MT4 Spindle Speed Range Low Range 75–438 rpm High Range 438–2500 rpm Spindle Travel Manual 107 mm Automatic 100 mm Distance from Spindle to Column Surface 250 mm Maximum Distance from Spindle Nose to Table Surface 445 mm Motor Power S1/S6 1.5 / 1.8 kW Net Weight 350 kg Overall Dimensions (L × W × H) 1084 × 924 × 1550 mm Height with Base 2150 mm

Condition: good (used), Year of construction: 2007, MACO KS425A Undercutting Circular Saw / Cold Cutting Saw, year of manufacture 2007, with hydraulic clamping system. Technical data: Manufacturer: MACO Model: KS425A Year of manufacture: 2007 Saw blade diameter: 425 mm Max. cutting height: 145 mm Saw motor: 1.3 / 2.6 kW Motor speed, saw head: 700 / 1400 rpm Hydraulic unit: 0.75 kW Coolant tank: 70 liters Hydraulic tank: 40 liters Machine weight: approx. 845 kg Dimensions (W x H x D): approx. 1160 x 1730 x 1750 mm Hydraulic clamping device Isdezfwu Tspfx Aggsba

Condition: like new (used), Year of construction: 2015, spindle diameter: 30 mm, pivoting range: 130 °, actuation type: electric, rotational speed (max.): 3,000 rpm, rotational speed (min.): 10,000 rpm, total length: 1,000 mm, total width: 1,000 mm, total height: 1,200 mm, Equipment: CE marking, documentation/manual, SCM Formula T60I Undercut Spindle Moulder | Spindle Tilt | 2015 – LIKE NEW! SCM Formula T60I Undercut Spindle Moulder | Spindle Tilt | 2015. For sale: a professional SCM Formula T60I undercut spindle moulder from the renowned Italian manufacturer, SCM Group. This machine, manufactured in 2015, is designed for demanding carpentry and production applications. Its robust construction, weighing 624 kg, ensures stable operation and high machining accuracy. TECHNICAL SPECIFICATIONS: - Spindle tilt from 90° to 135° - Smooth spindle speed adjustment from 3,000 to 10,000 rpm - Powerful 5.5 kW motor - Solid cast iron worktable - Professional design for continuous operation - Precise adjustment settings - Machine ready for operation - Machine tested (video of the machine in operation available on TikTok and YouTube – jbsmaszyny) Technical data: Manufacturer: SCM Group Model: Formula T60I Year of manufacture: 2015 Power supply: 400 V Motor power: 5.5 kW Spindle speed: 3,000 – 10,000 rpm Spindle tilt: 90° – 135° Weight: 624 kg You can test the machine on-site. Financing options available through leasing or installments. WE ORGANIZE TRANSPORT. Iodezp Hx Nopfx Aggsba WHERE CAN YOU SEE OUR MACHINES? JBS STOLARSKIE MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: used, Year of construction: 1991, We offer the following machine: - with roller conveyor --> Outfeed: 4 m --> Infeed: 3 m Technical details: - Saw blade diameter: 450 mm - Cutting diameter: 150 mm - Saw blade arbor: 50 mm - Table size: Ø 700 mm - Table rotatable: 360° - Electric model - Voltage / Frequency: 400 / 50 V/Hz - Compressed air connection: 6-8 bar - Total power consumption: 3.6 kW - Machine weight approx.: 1170 kg - Machine dimensions: 1.5 x 1.0 x 2.35 m (L x W x H) Circular saw, semi-automatic - Profiling circular saw machine - Undercut saw for cutting materials: steel as solid material, tubes, and profiles, taking into account the cutting range. Cutting speed depends on the material/workpiece to be cut. Miter cut: 30° to 90° Iodpfx Agozgvqpsgeba

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 51 mm, turning length: 102 mm, drilling depth: 102 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum turning length: 102 mm Maximum drilling depth: 102 mm Maximum round bar diameter: 51 mm Maximum square bar diameter: 36 mm Maximum hexagon bar diameter: 44 mm Maximum octagon bar diameter: 47 mm Spindle drum diameter: 340 mm Standard bar feed: 125 mm Special bar feed: 290 mm Standard longitudinal slide travel, total: 125 mm Standard longitudinal slide travel, working stroke: 100 mm Special longitudinal slide travel, total: 160 mm Special longitudinal slide travel, working stroke: 125 mm Upper cross slide travel, total: 60 mm Upper cross slide travel, working stroke: 36 mm Middle cross slide travel, total: 60 mm Middle cross slide travel, working stroke: 36 mm Lower cross slide travel, total: 70 mm Lower cross slide travel, working stroke: 44 mm Maximum material pass-through: 51 mm Maximum material feed: 125 mm MACHINE DETAILS Ibjdpoy R R Nwsfx Aggsa Coolant capacity: 660 l Pump capacity: 170 l/min EQUIPMENT Thread cutting device Right-hand threading via undercut Electric submersible pump Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (min.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Largest material passage: 32 mm Maximum bar feed: 125 mm Spindle speed (turning): 200–3,150 rpm Spindle speed (right-hand threading): 11.2–1,575 rpm Thread cutting unit: Right-hand thread via undercut MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Ibedpfx Aey R Rutsggsa Dimensions & Weight Footprint: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Holders Additional accessories

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (min.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Largest material passage: 32 mm Maximum bar feed: 125 mm Spindle speed (turning): 200–3,150 rpm Isdpsy R Rqbefx Aggsba Spindle speed (right-hand threading): 11.2–1,575 rpm Thread cutting unit: Right-hand thread via undercut MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Footprint: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Holders Additional accessories

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 12636, Manufacturer: HUNDEGGER Type of machining center: K2I 450 Year of manufacture: 2015 Machine number: 12636 Ibsdpfx Aszl Nlkeggea - Processing cross-sections - Frame length: 13.56 m - Fully automatic timber feed - Infeed roller conveyor - Transfer and feeding cross conveyor - Undercutting miter saw, 11 kW - Universal milling unit, 5-axis (UF5) - Roller cutter - Finger cutter - Dovetail cutter - Combination support for vertically operating tools - 2x Vertical finger milling cutter, 5.5 kW - 2x Drilling unit, 2.2 kW - 1x Drilling unit, 3 kW - Drilling unit, swiveling 45° (3.0 kW) - Drilling direction: horizontal - Combination support for horizontally operating tools - 1x Drilling unit, 2.2 kW - Drilling direction: horizontal - 1x Drilling unit, swiveling 45° (3.0 kW) - 1x Grooving tool, 7.5 kW - Grooving tool (8 x 630 mm) - Revolver milling unit - vertical from above - Longitudinal and transverse grooving cutter - Marking device, rear (fence side) - Marking device, front (operator side) - Marking and labeling device, bottom - Fully automatic beam turning station - hydraulic - Transport and positioning system "Two-hand system" - Electronic control with Hundegger production software - Timber storage with 5 arms - Safety devices and guards - Enclosure "Robot" design, AS+EZ area - Refined machine surface - Extension of the transfer cross conveyor and infeed roller conveyor, timber length 13 m - Raw timber holder in front of the universal saw (multi-length processing) - Control unit for disposal with operating buttons - Extension roller conveyor with adjustable (up/down) rollers

Condition: refurbished (used), functionality: fully functional, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: Completely overhauled Warranty: 1-year warranty Technical Specifications: Left-angle stop according to AGA 4383 Longitudinal Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (stepless adjustment via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in the machine base and pressure beam - Scoring saw adjustable from outside (without opening the safety hood) - Saw unit with controlled DC drive: - Precise positioning (e.g. for cutouts) Isdpfx Agoxhg Ibegsba - Slowed extraction from the cut - Includes safety hood locking, SZ 5008 lamella curtain - Offcut device SP 5004 – Offcuts down to at least 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (can be switched off separately) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: Threshold of 2 mg/m³ is significantly undercut - CE compliant Angle Pressure Device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material Feed Table HP 5021 (mounted at rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - Table length: 3100 mm - Stop depth: 3100 mm Multi-microprocessor control Integrated PC with hard disk Operating system: LINUX Interfaces: serial + parallel, USB Network connectivity (also wireless LAN) Optimize cutting plans in the office and send directly to the machine Multitasking capable Printing function via USB Remote maintenance via Internet (Remote Desktop, TeamViewer) Multilingual dialog programming 15” flat screen + multifunctional keyboard Swiveling control panel Graphical representation of cutting plans and work processes Additional Equipment: Angle Stop Table HP 5043 (front mounted): - Machined steel angle, Pertinax table top - Table size: 1800 × 800 mm Workpiece Support Table HP 5025 (front mounted): - Pertinax surface - Table size: 1800 × 800 mm Air Cushion Device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 Circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 Circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Condition: used, Year of construction: 2011, Undercut cross-cut saw with continuously adjustable pneumatic cutting feed located at the front of the machine. Pneumatically controlled workpiece clamping device (also serves as a safety guard). Well-protected pneumatic units mounted within the compact machine body, with the maintenance unit mounted externally on the machine base frame. Extra-flat special circular saw motor for increased cutting height. Cut initiation via two-hand control with safety shield. The saw kerf is positioned on the right side with an inclined opening to allow cut-offs and waste pieces to fall freely. Safety Standards: CE compliant (in combination with roller tables), BG dust-tested, Type-tested, Electrical control cabinet integrated into the machine stand, Emergency stop device Processable Timber Dimensions Saw Unit • Saw blade diameter: Ø 550 mm • Carbide saw blade, Z = 60 teeth, WZ20° • Saw blade bore: 80 mm Nominal Cross-Sections (without board curvature) • Max. 750 × 50 mm • Or 710 × 75 mm • Or 660 × 100 mm Ijdpozki Uiofx Aggjba • Or 570 × 125 mm • Or 450 × 150 mm • Or 260 × 175 mm Permissible timber curvature in all directions: max. 3 mm per meter of length, or max. 10 mm over the entire length. • Minimum end length: approx. 10 mm • Wood species: softwood / hardwood / wood-based materials • Working height: approx. 850 mm Equipment and Technical Data • Powerful saw motor: 5.5 kW • Saw kerf on the right-hand side • Pneumatically lowered safety shield, pivoting away for easier access to the cutting area • Operating voltage: 400 V / 50 Hz Pneumatic and Extraction Requirements • Minimum air pressure: 6 bar • Extraction air velocity: approx. 30 m/s Extraction Connections • Lower housing outlet: 120 mm • Upper guard outlet: 120 mm • Extraction volume: approx. 2,600 m³/h • Weight: approx. 500 kg Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.