Used Armature Undercutting for sale (41)

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase Bsdpfxefhbuys Al Ielg - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device - Upper safety pressure device (pneumatic protective hood) - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 401 Aluminyum Pvc Alttan Çıkma Kesim Makinası, functionality: fully functional, • Complies with CE standards. • Performs precise cutting at 0 - 180 degrees and intermediate angles. • Quick setting stops for 15, 22.5, 30, 45, 60, and 90 degree angles. • Table locking lever for intermediate angles. • Saw output speed regulator reduces speed when cutting aluminium, decreasing motor load. • Safety guard for secure cutting. Bljdpfxoq U Tcte Al Ijg • Diamond saw blade diameter: 450 mm, output distance: 12.5 cm. • Standard with measurement and transport conveyor (2.5 metres right and left). OPTIONAL • Cooling system and Hydro check system available for aluminium cutting. • Capability to work with a digital meter.

Condition: good (used), Year of construction: 1995, functionality: fully functional, saw blade diameter: 400 mm, max blade diameter 400 mm cutting height adjustment angle adjustment 0″- 45″ spindle diameter 30 mm blade guard max. cutting width with guide bar 1270 mm 2 types of rotation speed 3000 / 4500rpm table top dimensions 1020 x 1120 mm worktop extension Bodpfxeqwduxs Al Ielg worktop extension undercutter max diameter of undercutting saw blade 130 mm diameter of undercutter spindle 20 mm undercutter motor 0,75 kW motor 4 kW overall dimensions L/W/H 2930 x 2600 x 1450 mm weight 711 kg

Condition: ready for operation (used), Year of construction: 1990, MARKON Log house drilling machine with undercutter year 1990 manufacture Markon Lathi / Finland Length = 3550mm Width= 1500mm Height= 2910mm Engine power Drilling unit: 6 x 3 kW moulder: 1 x 5.5 kW Dimensions of the log to be pushed Blsdpfx Alefw Rt Ro Iog Height max 250mm Height min 130mm Width max 250mm Width min 60mm Length min 600mm Tool sizes and speeds Drill max diameter 40 mm Moulder max diameter 250 mm Drill length 325 mm Drill mounting arm diameter 20h7 mm Drill rotation speed 2880 rpm Moulder: rotation speed 2880 rpm AIR Suction openings dia. 160 mm 2 suction openings Drill unit suction opening diameter 90 mm Suction openings 6 pcs Air speed at the suction opening 30 m / s Air consumption 8460 m3 / h electrical connection Total power 380 V 24 kW Compressed air connection Minimum pressure 6 bar Drilling unit air demand / stroke "48 1 Total air demand ~ 2200 1 / min incl. 3,5 meter roller conveyor + 12 drillings

Condition: used, Year of construction: 2001, Undercut cross-cut saw HM-D 6500-R Serial number: 319 Connection Voltage: 400V- 11KW Weight: 2450 KG Saw blade max: 550 mm Saw blade min: 500mm Bore: 30mm Length automatic feed: unknown - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 319 Financial information VAT: The price shown is exclusive of VAT Blodpowng Sijfx Al Ieg VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2000, operating hours: 11,185 h, Equipment: all wheel drive, Internal vehicle no.: G300134 German vehicle Available immediately at our yard in Kaufungen - Kassel More INFO from: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Weight: 24.2 tonnes Standard tires: 26.5 R 25 Undercut width: 3.2 m Capacity: 4.1 m³ Bucket volume min. 4.1 m³ Legal status from KL Transport length: 8.99 m Transport width: 2.95 m Transport height: 3.56 m Blsdpfxoy Eknie Al Ieg Maximum speed: 39 km/h Maximum height from 4.3 m Force: 203 kN C-Series model Engine manufacturer: Cummins Engine type: M11C270 Engine power: 204 kW Errors excepted We are happy to accept your used vehicle as a trade-in. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, Year of construction: 2026, Thread cutting device Undercutting device Programmable drilling depth stop Blsdpfsd H Rh Rjx Al Ieg Drilling depth and speed display - digital Thread cutting device M30 (pitch-dependent) Option R1: Infinitely variable spindle speeds with intermediate gearing, speed range 100-2000 rpm Option R2: Infinitely variable spindle speeds with intermediate gearing, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle taper MK 4 Drilling depth 160 mm Throat 300 mm Usable table area (swiveling) 590 x 450 mm Feed rate 0-300 mm/min, stepless Table height adjustment with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor - three-phase 400 V, pole-reversible, 1.5/3.0 kW Weight 420 kg Option Drill Set No.6: Taper arbor B18/ MK 4, Keyless drill chuck B18/ 3-16 mm, Machine vice No. 2-140 and T-slot bolts, EUR 910.00 Option: Automatic spindle stop at upper drill spindle position, EUR 432.00 Option: Chip break module EUR 432.00 Delivery: free to site including packaging (Germany only) Warranty: 3 years NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS – REQUEST AN OFFER! FLOTT AUTHORIZED DEALER

Condition: new, bore capacity in steel St 60 25 mm Drilling capacity in St 60 30 mm threading in St 60 M 16 M 20 Short spindle MK 3 spindle stroke 140 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 514x360 mm T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 132/724 mm feed von Hand 0 stufenlos Spindle Speed 225-4300 U/min. engine 1,0/1,6 kW voltage 400 V Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. Blsdpfx Aoyvvpgel Ijg direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 303 mm, cutting length (max.): 5,300 mm, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, Striebig Standard 6224 TRK I (Wood Support Wall) Cutting capacity Type 6224 L: 5300 x H: 2240 / H: 2100 x D: 80 mm Saw Frame • Precision machined to 1/100 mm accuracy • Solid, self-supporting, firmly welded, torsion-resistant saw frame • TRK2 automatically adjustable aluminum slatted frame with plastic supports • TRK1 automatically adjustable wood support wall • 17-position roller support with 3 brake pedals (Type 6224) • 5.15 m long, divided center support at optimal working height (Type 6224), with aluminum grids • Aluminum small parts support (1 pair) for individual use Saw Beam • Stable, durable steel saw beam construction Saw Unit • Effortless operation thanks to fully balanced Saw unit • Robust motor carriage bearings ensure high cutting precision • Powerful, high-torque 5.5 kW (7.5 HP) motor • 300/30 mm carbide circular saw blade Bedou Nf E Aspfx Al Ijlg • 9 mm saw blade projection (undercut) • Integrated stop for horizontal strip cuts • SUPERSILENT sound insulation to reduce saw blade noise • Mechanical motor brake Design, Ergonomics • STRIEBIG-typical product design • Functional and user-friendly ergonomics Installation • Wall or freestanding installation possible - Pneumatically braked support rollers A05 TRK - Paper holder - Complete aluminum small parts support (2-part) - Vertical digital measuring system

Condition: new, Year of construction: 2026, functionality: fully functional, Sharpening device for drill bits made of HSS or any other hard metals, ensuring precise grinding and easy handling. Adjustable tip angle in the 90°–135° range. This model is equipped with an additional slot for sharpening undercuts. Machine features Precise grinding and convenient handling. Sharpening drill bits with ease. Portability due to its modest dimensions. Dressing wheel promising superb efficiency. Fully equipped; with a handle inside the device. Additional slot for sharpening undercuts. Technical data Drill bits diameters capability ø2–13 mm Blodpsvu Ub Hefx Al Isg Angle of the tip 90°–135° POWER 120 W / 230V Motor speed 4800 rpm Approx. weight 9 kg Dimensions 330 x 170 x 160 mm

Condition: new, Year of construction: 2026, The PS12E-3000 format saw is a professional carpentry tool that stands out for its powerful specification and its ability to perform large-scale precision cuts. This advanced circular saw has been developed for a variety of woodworking tasks and is the ideal tool for demanding users. The main features of the saw, the PS12E-3000 wood panel saw: Two cutting discs: The saw is equipped with two cutting discs - a main disc and an undercutting disc - which provides ample cutting capacity for different types of wood materials. Large format table: One of the main advantages of this model is the extra-wide, bearing-mounted format table with support, which allows precise processing of large-format chipboard up to almost 3,000mm long and other large-sized wood materials. Additional undercutter: The additional undercutting blade makes the saw ideal for cutting furniture board and particleboard, eliminating the risk of splintering and ensuring an even cut. Disc inclination: The cutting disc can be tilted from 90° to 45° Maximum bar length: This saw is fitted with a bar of an impressive length of 2,300 mm Disc replacement: The replacement process is quick and efficient, thanks to the ability to remove the metal top and unscrew the blade. Saw blade guard: The saw has an effective saw blade guard, which can also be connected to the extraction system to help keep the work area clean. Powerful motor: The saw blades are driven by a powerful 3.8 kW, 400V motor, which guarantees smooth operation and efficient cuts. Control panel: The machine's control panel is located on the underside of the saw and includes an emergency stop, a knob for angle cuts (45°) and a knob for blade height adjustment with a locking mechanism. Additional measuring instruments: All guides are equipped with length and cutting angle scales, allowing the required angle and length to be quickly set without the need for additional measurements. Extraction compatibility: The saw is suitable for connection to a sawdust and chip extraction system with a suction nozzle diameter of 100 mm, which contributes to keeping the workplace clean. Application of the saw, format saw for wood: The PS12E-3000 format saw is an advanced tool that combines durability, precision and performance, making it the ideal choice for professional woodworkers and everyday woodworkers. Its versatile capabilities and advanced features allow it to handle a wide variety of woodworking projects and tasks in both industrial and craft settings. DIMENSIONS OF THE MOVING TABLE 3000 x 270 mm MAIN TABLE DIMENSIONS 800 x 385 mm SIDE AUXILIARY TABLE DIMENSIONS 880 x 800 mm BAND WIDTH 1220 mm SAW TILT 0-45° Bledpfovugc Aox Al Ijg CUTTING HEIGHT AT 90° 100 mm CUTTING HEIGHT AT 45° 80 mm MAXIMUM SAW SIZE 315 mm MAXIMUM Blade size 100 mm MAIN SAW RPM 4000 rpm CUTTING SAW RPM 5800 rpm POWER OF ENGINE S6 5,3 kW / 7,1 hp POWER OF ENGINE S1 3,8 kW / 5,1 hp 400 V POWER SUPPLY WEIGHT 309 kg

Condition: new, Year of construction: 2026, The PS12E-2000 format saw is a professional carpentry tool that stands out for its versatility and advanced features. This circular saw has been designed for a wide variety of woodworking tasks, offering both precision cutting of narrow and thin boards and handling thick wood tops with a maximum thickness of up to 100mm. The main features of the saw, the PS12E-2000 wood panel saw: Two cutting discs: the saw is equipped with two cutting discs - a main disc and an undercutting disc, providing versatile cutting capabilities for different types of wood materials. MDF undercutter: An additional undercutter has been fitted to the machine, allowing precise cutting of MDF and other wood materials with a similar structure. Blade height adjustment: offers infinitely variable height adjustment of the cutting saw up to 100 mm, allowing it to be adapted to different material thicknesses. Disc inclination: The cutting disc can be tilted from 90° to 45° Solid guideways: The machine has solid guideways with scales, both longitudinal (steel) and angular Additional format table: the large bearing-mounted format table with support is one of the main advantages of this saw. This makes it possible to process large format boards and materials with a large surface area. Sawdust discharge system: The woodworking machine is equipped with a sawdust discharge pipe system, which helps keep the work area clean. Bedpfxjvuf Tme Al Iolg Easy disc change: The replacement process is quick and efficient, allowing you to work efficiently. Side guide with graduation: fitted with a side guide with accurate graduation, which facilitates serial cuts of the same length. Saw blade guard: the saw has a saw blade guard that can additionally be connected to the extraction system, which guarantees safety and cleanliness in the working area. Technical data: Length of the format table [mm] 2000 Cutting width right side [mm] 1260 Swing of saw blade [°] 45 Cutting height at 45° [mm] 80 Cutting height when using circular saw blade 315 90° [mm] 100 Cutting height with saw blade set to 300 90° [mm] 95 Maximum dimension of saw blade [mm] 315 x 30 Maximum dimension of undercut [mm] 100 x 20 RPM of main saw [U/min] 4500 Bowl speed [U/min] 5800 Motor power S1/S6 3.8 kW / 6.1 hp Power supply 3 phases, 400 V Weight [kg] 275 Warranty [months] 12

Condition: excellent (used), SMT Lathe 80001350   The machine is designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick & place unit between the shaft ends. - Ring seat turning + commutator facing + commutator turning. - Ring assembly - commutator side - Ring assembly - drive wheel side The machine has several production programmes to produce different parts. Each programme corresponds uniquely to one shaft type Technical data Armature shaft length from to 92.5 - 163.1 mm  Bearing journal diameter commutator side 8; 10; 12.5 mm Bedpfehw Emqsx Al Iolg Drive side 12; 8 mm Min. available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm Ring seat diameter 44 - 50 mm Surface ring seat Rz 20 mm Main dimensions and weight of the machine Machine length 2870 mm Machine width 2600 mm Machine height 2530 mm Machine weight 5000 kg Electrical installation Rated current 10 A Rated voltage (AC) 400 V Rated power 7 kVA Rated frequency 50 Hz Pneumatic installation Nominal pressure 5 bar Maximum pressure 10 bar Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: repair required (used), Year of construction: 2002, functionality: limited functionality, For sale is a presetting device of the company Mapal and the type Uniset-V The device itself is in good condition and functional, however the digital display is defective and needs to be repaired Blsdpfxsmkikfo Al Ijg Measurement of tools, undercuts and distances possible as well as clamping between centers is no problem Technical data: Manufacturer Mapal Type: Uniset-V Year of manufacture: 2002 Digital display Heidenhain Electric axis control 4 axes travel + turntable Additional shelf with sockets for printer etc. No data sheets or operating instructions available Weight approx. 1.5 tons Dimensions: approx. 1.75m*0.75m*2.41m Loading & or shipping possible for an extra charge Prices plus value added tax Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2006, No. 10034 2 pieces stationary single shaft shredder Doppstadt DW 2560 E1 Stationary single-shaft shredder Doppstadt DW 2560 E1 (1 of 2) Used, year of construction 2006 (overhauled by the manufacturer in 2024: new shaft / new gearbox / new bearings / etc.) Since overhaul approx. 600 operating hours Motor electric Approx. 20000 operating hours The scope of delivery does not include a conveyor belt Including replacement gearbox Filling width 1900 mm / Filling length 3060 mm Motor: Manufacturer T-T Electric / Type DC motor LAK 4250 C / Power 315 kW / Rated speed 2000 rpm / Armature voltage 460 V / Armature current 721 A / Field voltage 340 V / Field current 14.8 A / Degree of protection IP 55 / Cooling 2 separate motors Hydraulic unit: Manufacturer OC-Hydraulik Doppstadt / power 7.5 kW / rated voltage 380 V Cutting unit: drum / length 2500 mm / diameter 600 mm / speed 31 rpm Throughput: shredded material up to 40 t/h Transport dimensions approx. 8000 (7850) x 4700 (3450) x 5380 mm LWH Weight approx. 25665 kg Stationary single-shaft shredder Doppstadt DW 2560 E1 (2 of 2) Used, year of construction 2006 (overhauled by the manufacturer in 2024: new shaft / new gearbox / new bearings / etc.), fire damage December 2025 (drum condition good, gearbox condition good, motor condition unclear, control unit condition burnt down, hydraulic unit condition burnt down) Since overhaul approx. 200 operating hours Motor elektric Approx. 23000 operating hours The scope of delivery includes a conveyor belt Bodpfx Aljym Edts Iolg The machine was used for bulky waste and wood Filling width 1900 mm / filling length 3060 mm Motor: Manufacturer T-T Electric / type DC motor LAK 4250 C / power 315 kW / rated speed 2000 rpm / armature voltage 460 V / armature current 721 A / field voltage 340 V / field current 14.8 A / degree of protection IP 55 / cooling 2 separate motors Hydraulic unit: Manufacturer OC-Hydraulik Doppstadt / power 7.5 kW / rated voltage 380 V Cutting unit: drum / length 2500 mm / diameter 600 mm / speed 31 rpm Throughput: shredded material up to 40 t/h Longitudinal belt: length 7800 mm / width 1000 mm / discharge height 1680 mm / speed 1.8 m/s Transport dimensions approx. 8000 (7850) x 4700 (3450) x 5380 mm LWH Weight approx. 25665 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price reserved Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Gear motor, electric motor, electric gear motor, spur gear motor Blodergtd Hopfx Al Ieg -Manufacturer: Ankerwerk Nuremberg AEG, geared motor with brake -Gear: Armature movement CAM 76 N 1 i= 33 -Speed: 43 rpm -Engine: AEG type AM 80 N4 -Power: 0.75 kW / 1400 rpm -Shaft: Ø 32 x 78 mm -Dimensions: 525/240/H275 mm -Weight: 50 kg

Condition: good (used), Filtration Plant, make Seitz Orion, 100 x 100, for 180 hl/h, in 2002 overhauled, consisting of: - Kieselguhr-frame filter, with 29 kieselguhr frames in s/s, outside lying raising pipes, sight glass armatures with pressure manometer, with kieselguhr discharge tub with screw in s/s, with kieselguhr dosage unit - Sheet filter with 150 stainless steel plates, outside lying raising pipes, sight glass armatures with pressure manometer Blederai N Aspfx Al Isg - operating platform between both Filter, stairs at DE-Filter - Control cabinet

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following use: Diffusion welding machine for connecting the armature lead to the commutator of a starter armature using diffusion welding. Diffusion welding unit (also known as polymer diffusion welding unit, diffusion welding, copper soft welding unit, copper strip welding unit), consisting of a main machine and control system, PLC control, touchscreen operation. Blsdog Icfpspfx Al Ieg Process Description The workpiece carrier enters the station and is lifted. The alignment gripper picks up the armature from the workpiece carrier and aligns it according to the welding position. The loading gripper picks up the armature and places it in the welding chuck. The welding chuck moves with the armature into the welding position. The contacting unit and welding cylinder move together, and the first weld is performed. This process is repeated until the armature is completely welded. The welding chuck moves with the anchor into the transfer position, and the unloading gripper picks up the anchor and places it on the raised workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with OK anchors continue on the conveyor system; NIO anchors are sent to the removal conveyor. At a welding machine, the OK anchors are marked with a color on the end face of the commutators using a stamping station. This allows for identification during the final inspection of which welding machine produced the anchor. ... Technical Data: Diffusion Welding Machine Energy Data: Frequency: 50 Hz Rated Power: approx. 11 kW Operating Voltage: 400 V / 3P Control Voltage: 24 V Rated Current: 20 A Fuse: 35 A Water: Inlet pressure 4 bar, 15-23 °C, approx. 25 l/min Compressed Air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine Dimensions without Control Cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of Manufacture: 2016 Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, LDS Type: V875 Shaker System V875-440 with amplifier SPA40K Shaker for medium forces Technical data: Headexpander 850 * 850 mm Armature dimensions: 440 mm Sinusoidal force vector 35.6 kN (peak) Sine force vector 35.6 kN (effective) Shock force vector 106.75 kN (peak) Frequency range 5 to 3000 Hz Test specimen mass max.600kg Acceleration max. 1078.7 m/s² Speed max. 1.8 m/s Condition: gebraucht / used Weight: Shaker approx. 2200 kg Blower: 181 kg Amplifier: 622 kg Scope of delivery: (See pictures) (We reserve the right to make changes and errors in the technical data!) Bodjuxcpwopfx Al Islg We will be happy to answer any further questions you may have over the phone.

Condition: used, LDS Type: V875 Shaker System V875-440 LPT600C with amplifier SPA40K Shaker for medium forces Technical data: Armature dimensions: 440 mm Headexpander 850 * 850 mm Sinusoidal force vector 35.6 kN (peak) Bodpfx Aljuxcugs Ielg Sine force vector 35.6 kN (effective) Shock force vector 106.75 kN (peak) Frequency range 5 to 3000 Hz Test specimen mass max.600 kg Acceleration max. 1078.7 m/s² Speed max. 1.8 m/s Deflection ± 25.4 mm Vibration tests: Sinusoidal Noise Shock Amplifier SPA40 Sliding table: WxHxD mm : 1400 mm x 1250 mm x 2200 mm Work surface: 600 mm * 600 mm Thickness of the top : 37 mm Weight of the top: 27.4 Max load : 500 kg Condition : gebraucht / used weight: Shaker approx. 2200 kg Blower 181 kg Amplifier: 622 kg Sliding table 4760 kg Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, IMV Type: i240 + SA3AM Power Amplifier + Fan Dimensions Power Amplifier: SA3AM.i40 W x H x D 1234 x 997 x 720 mm Vibration Exciter: i240 W x H x D 580 x 1950 x 850 mm Technical Data: Armature Mass: 20 kg Armature Diameter: 290 mm Armature Resonance: 2300 Hz Permissible Eccentric Moment: 850 N·m Frequency Range: 0-2600 Hz. Maximum Force: 24 kN (sine and random) 48 kN (shock) Maximum Acceleration: 1200 m/s² (sine) 840 m/s² (random) 2400 m/s² (shock) Maximum Displacement: 100 mm p-p. Maximum Load Capacity: 400 kg. Ambient Conditions: Temperature 0-40 °C, Humidity 0-85 %RH. Maximum Output Power: 30 kVA (SA3AM-i40) + Bedpow H N U Defx Al Iolg Shaker Armature 290 mm Usable up to 2000 Hz Weight: 410 kg (SA3AM-i40) Total weight approx. 2800 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) For further questions, please contact us by phone.

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Bjdpfx Alevr Eh Es Iolg Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, table length: 4,500 mm, table width: 2,500 mm, spindle speed (max.): 22,000 rpm, CNC Heidenhain iTNC 640 WORKING AREA: Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE: Dimensions: mm 4.500 x 2.500 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE: Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. C-axis rotation range: ± 270° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Constant power range: rpm 3.000 to 18.000 Constant torque range: rpm 10 to 3.000 Tool interface: HSK-A63 DIN 69893 ELECTROSPINDLE HSK-A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM Spindle power (S1/S6): kW 37/43 Spindle torque (S1/S6): Nm 140/165 Maximum spindle speed: rpm 15.000 Constant power range: rpm 2.500 to 12.000 Constant torque range: rpm 10 to 2.500 Tool interface: HSK-A100 DIN 69893 CHAIN TOOL MAGAZINE – 55 POSITIONS, HSK-A100 / HSK-A63 Floor-mounted fixed chain magazine located at the rear of the machine, fully enclosed for operator protection, equipped with a vertical tool change arm and automatic tool pre-selection. Fixed-pocket management system. Hydraulic axis locking Total tools: No. 55 HSK-A63 tools (DIN 69893): Number of tools: No. 30 Max tool diameter: mm 90 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 300 Max tool weight: kg 10 HSK-A100 tools (DIN 69893): Number of tools: No. 25 Max tool diameter: mm 100 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 450 Max tool weight: kg 20 REQUIRED CONNECTIONS Maximum installed power: kVA 177 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • High-pressure water and air through the spindle • Semi-automatic electrospindle change system with HSK-A63 and HSK-A100 interfaces • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle Bodpfx Aljyv In Ie Ielg • User and maintenance manual and CE declaration of conformity

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,500 mm, feed rate Y-axis: 50 m/min, table length: 6,000 mm, total width: 3,000 mm, spindle speed (max.): 22,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, spindle nose: hsk 100, CNC Heidenhain iTNC 640 WORKING AREA X-axis longitudinal travel: mm 6.000 Y-axis transversal travel: mm 2.700 Z-axis vertical travel: mm 1.500 Maximum feed rate with interpolated axes: m/min 50 WORK TABLE Dimensions: mm 6.000 x 3.000 Height: mm 300 Load capacity: t/m² 15 T-slots for workpiece clamping: mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH MOTOR SPINDLE Automatic universal indexed head with 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercutting. Internal cooling system for bearings and axis motors. C-axis rotation range: +/- 270° A-axis rotation range: +/- 185° Maximum axis rotation speed: rpm 30 Maximum torque on A/C axes during operation: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Constant power speed range: rpm from 3.000 to 18.000 Constant torque speed range: rpm from 10 to 3.000 Tool interface: HSK – A63 DIN 69893 HSK – A100 MOTOR SPINDLE WITH SEMI-AUTOMATIC CHANGE SYSTEM Spindle power (S1/S6): kW 37/43 Spindle torque (S1/S6): Nm 140/165 Maximum spindle speed: rpm 12.000 Constant power speed range: rpm from 2.500 to 12.000 Constant torque speed range: rpm from 10 to 2.500 Tool interface: HSK – A100 DIN 69893 CHAIN TOOL MAGAZINE – 55 POSITIONS, HSK-A100 / HSK-A63 Bjdpfx Aleyvtt No Ielg Floor-mounted chain magazine located at the rear of the machine, enclosed for operator protection, with vertical tool change arm and automatic tool preselection. Fixed-position management. Hydraulic axis clamping Total tools: No. 55 HSK-A63 tools (DIN 69893): Number of tools: No. 30 Max tool diameter: mm 90 Max tool diameter with adjacent free positions: mm 160 Max tool length: mm 300 Max tool weight: kg 10 HSK-A100 tools (DIN 69893): Number of tools: No. 25 Max tool diameter: mm 100 Max tool diameter with adjacent free positions: mm 160 Max tool length: mm 450 Max tool weight: kg 20 REQUIRED CONNECTIONS Maximum installed power: kVA 177 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • High-pressure coolant (water and air) through the spindle • Semi-automatic spindle change system with HSK-A63 and HSK-A100 interfaces • Various tooling included with the machine • Renishaw probe • BLUM laser tool presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and motor spindle • User and maintenance manual and CE declaration of conformity

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. Bsdpsq Ii Dlsfx Al Iolg - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.