Used Unisign Univers 6 for sale (8)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 55,106 h, travel distance X-axis: 5,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle motor power: 26,000 W, This 5-axis Unisign UNIVERS 6 was manufactured in 2008. Ideal for complex geometries, this vertical machining centre enhances precision in diverse machining tasks. Consider the opportunity to buy this Unisign UNIVERS 6 vertical machining centre. Contact us for more information. Additional equipment • Number of tools: 52 Machine Benefits Technical Machine Benefits • Control: Siemens Sinumerik 840D • Control language: German / French switchable • Working area X: 5000 mm • Working area Y: 800 mm • Working area Z: 600 mm • Drive power: 26 kW • Spindle speed: 6000 rpm • Spindle torque: 165 Nm • Gear spindle torque: 650 Nm • Tool holder: SK50 • Number of tools: 52 • Tool magazine capacity: 52 positions • Machining capability: Long part machining or pendulum operation • 5-side machining with interchangeable angle head • Angle drilling and milling head for SK50 tools with pick-up station • Tool swivel system for angle head tool change • Chip conveyor hinge belt type • Clamping table: 850 x 1200 mm • Additional clamping table: 850 x 800 mm • Touch probe system radio type (M&H) • Central coolant through spindle and tool with rotary filter system • Central coolant through horizontal spindle of the angle head Hjdpfx Aaoypnb Hsajk • Cleaning spray gun connected to separate pump • Hydraulic system 250 bar with pump and piping • 2+2 quick couplings • 2 clamping circuits single acting • Heat exchanger with cooling unit in electrical cabinet • Electronic handheld control unit for Sinumerik 840D • Movable operator panel • Program and station selection for pendulum operation (2 stations) • Cell operator panel for pendulum operation and clamping functions (2 units) • Partition wall with viewing window • Remote diagnostics system for Siemens Sinumerik 840D • Diagnostic system UNISIGN for Siemens Sinumerik 840D • Automatic door with manual control or M-function • 220 V socket in electrical cabinet • Installation and leveling elements set • Control runtime: 55106 hours Technical Specification Taper Size SK 50

Condition: used, Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, overall weight: 9,000 kg, table length: 825 mm, table width: 625 mm, controller model: 21i MB, Travelling Bridge CNC Vertical Machining Centre Table size (2) 825 x 625 mm. Number of pallets: 2 Movement x-Axis 1600 mm. Movement y-Axis 600 mm. Movement z-Axis 500 mm. 4th Axis (Rotary table) NC Max table load 1200 kg Number of tools in magazine 51 pieces. Maximum spindle speed 12.000 R/pm. Tool taper DIN 69871A CNC control Fanuc 21i MB Hjdpfxjyu Trhe Aaaok If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 19,357 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 810D, table load: 150 kg, overall weight: 9,000 kg, number of slots in tool magazine: 44, tool weight: 5,000 g, number of axes: 4, This 4-axis Unisign Univers 4 was manufactured in 2004, featuring X-travel of 1600mm, Y-travel and Z-travel of 400mm each, and a spindle speed up to 9000 rpm. It includes a chain tool magazine with 44 positions and a tool holder type DIN 69871-SK40. The machine weighs 9000 kg and requires a space of 6.5 x 3.5m. If you are looking to get high-quality milling capabilities consider the Unisign Univers 4 machine we have for sale. Contact us for more information. Additional equipment • Measuring Probe RWP20.00 • Enclosed Work Area Enclosure according to UW • Some SK40 Chucks • Hydraulic/Pneumatic Clamping Option in the Machining Area • Römheld 8400-185 Hydraulic Unit, Max. Pressure 500 bar • Flushing Gun in the Machining Area • Replacement Milling Spindle Available Machine Benefits Technical Machine Benefits • Total power requirement: 14 kw • A-axis: 360 x 0. 001°, 20 rpm • Table/pallet size (lxw in mm): 1 bridge with 4 sides, l1800mm, 4x113mm • Table/pallet alignment type: m10 & 10h7 grid • Tool magazine type: chain magazine Hjdpjx D H Sxofx Aaask • Coolant type/content: emulsion (internal & external) / approx. 480 l • Coolant unit: clefil rbf-e100 20 bar via m-befeld, max. 75 l/min • Some hydraulic and pneumatic hoses replaced • Lt module replaced in the control cabinet • Regular maintenance was performed Extra Information Machine still under power Dimensions Machine Depth 6500 mm

Condition: used, Year of construction: 2001, functionality: unexamined, machine/vehicle number: 4552, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 800 mm, table width: 330 mm, table length: 660 mm, CNC vertical machining center with accessories Hedoyxmpiepfx Aaask

Condition: used, Year of construction: 2004, operating hours: 19,357 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Siemens 810 D, total length: 6,500 mm, total width: 3,500 mm, overall weight: 9,000 kg, spindle speed (max.): 9,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a 4-axis vertical machining center from Unisign, model Univers 4, year of manufacture 2004. The machine is used but in good condition, fully functional, and has been regularly maintained. Special feature: second milling spindle (replacement spindle included). Operating hours: 19,357 Technical Data -Traverse paths: X = 1600 mm / Y = 400 mm / Z = 400 mm -B axis: A axis (360° x 0.001°) 20 rpm -Spindle speed: 0 – 9000 rpm -Control: Siemens Sinumerik 810D -Table size: 1 bridge with 4 sides, L 1800 mm, 4 x 113 mm -Table load capacity: approx. 150 kg -Working feed rate: 5 – 28,000 mm/min -Rapid traverse (X/Y/Z): 28,000 mm/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 44 stations -Tool diameter: approx. 70 mm (up to 200 mm with free adjacent slots) -Max. tool length: approx. 240 mm -Max. tool weight: 5 kg -Max. total weight of tool magazine: approx. 200 kg -Tool change time: approx. 8 sec Machine Requirements & Dimensions -Total power requirement: 14 kW -Machine weight: approx. 9000 kg -Footprint (LxW): approx. 6.5 x 3.5 m Equipment & Accessories -Coolant system (approx. 480 L, internal & external emulsion) -Clefil RBF-E100 20 bar pump unit -Chip conveyor -Rinse gun in machining area -Hydraulic/pneumatic clamping options in machining area -Enclosed work area cover in accordance with safety regulations (UVV) -Röhmheld hydraulic aggregate (max. 500 bar) -Automatic probe RWP20.00 -Various SK40 holders -Technical documentation & floor plan available Maintenance -Regular maintenance performed -Hydraulic and pneumatic hoses partially renewed -LT module replaced in control cabinet Hodsx Iputjpfx Aaaek The machine is immediately available and ready for operation. If interested or if you have any questions, please get in touch! All information provided to the best of our knowledge and belief. Subject to change, error, and prior sale.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Unisign Uniport 6000 Hedsymb Easpfx Aaaok Year of manufacture: 2010 / Commissioned: 2011 Control: Siemens 840 D Travel ranges: X = 10,000 mm, Y = 1,500 mm Enlarged spindle ram stroke: Z = 1,000 mm Enlarged clearance height: 1,000 mm Clearance width: 1,500 mm Main drive: 36 kW, n = 6,000 rpm, 720 Nm 2-speed gearbox, 1:4 Taper: SK 50 Machining capacity in C45: - Solid drilling D=120mm - Tapping M55 - Milling 100 cm³/min Gantry design with traversing portal bridge and stationary clamping table. Clamping table equipped with transverse clamping beams at 750 mm intervals; standard plate sections eliminated. Hydraulic clamping device with clamping bridges for axle machining, including hydraulic unit Angle drilling and milling head, n = 4,000 rpm, SK 50 High accuracy and stability thanks to Hirth coupling Automatic tool change into the angle head Measuring probe RWP20.50-M Pendulum operation Safety fence with light curtains, Sick brand Clamping table with transverse clamping beams at 750 mm spacing Tool chain magazine on portal column with 30 stations Machine cooling unit Water-air heat exchanger integrated in the control cabinet Unisign remote diagnostics for Siemens Sinumerik 840 D Makrolon curtains on both sides of the portal bridge, motorized height adjustment Partition wall with viewing window Chip conveyor with hinged belt design Mounting and alignment elements included

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 400 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, spindle speed (max.): 6,000 rpm, number of axes: 3, This 3s Unisign Uniport 4 vertical machining centre was manufactured in 2001. It features a generous X-travel of 4000mm, Y-travel of 1550mm, and Z-travel of 400mm, along with a Siemens 840D controller and a 50-tool automatic tool changer. The machine has been well-maintained, with a new spindle and bearings. Consider the opportunity to buy this Unisign Uniport 4 vertical machining centre. Contact us for further details. • ATC capacity: 50 tools • Spindle taper: SK40 with internal/through-spindle coolant • Linear scales on axes • 2025 service/overhaul Hsdpfx Aoyk A Tgoaaek • New spindle (approx. 200 operating hours) • Spindle motor rewound (approx. 200 h) • New spindle bearings (approx. 200 h) • 2-speed spindle gearbox fitted with new bearings (approx. 200 h) • New linear bearing on X axis (approx. 200 h) • All pneumatic hoses replaced Technical Specification Taper Size SK 40

Condition: used, Year of construction: 1996, x-travel 3000 mm y-travel 1500 mm z-travel 400 mm Serial number 7872 chip conveyor MAYFRAN 40.6GS-HR/SP20 control SIEMENS SINUMERIK 820 table surface area 3000 X 1500 mm table load 1000 kg / m2 Tool changer 52 stck. weight of the machine ca. 15000 kg UNISIGN - Uniport 4 - Machining centre - Vertical Hjdpfjud Ixlsx Aaaok Technical details will be added shortly 40820 operating hours including chip conveyor from the manufacturer MAYFRAN with TYPE 40.6GS-HR/SP20 Total weight: 15,000 kg