Used Vertical Banding for sale (10,709)

Condition: ready for operation (used), Year of construction: 2022, General Data Machine weight 6500 kg Control Unit Brand FANUC Main Drive Number of axis 3 Movement X-Axis Movement 1050 mm Y-Axis Movement 570 mm Z-Axis Movement 510 mm Tools Number of index 30 Type of tool holder ISO 40 Ibsdpfsxpkqcjx Ag Njc Additional Equipment Inner Cooling: 13 bar This 3-axis DOOSAN DNM 5700 vertical machining center was manufactured in 2022. It features a Fanuc i-Series control, a spacious 1300 x 570mm table, and a tool magazine with 30 slots. The spindle speed reaches up to 12,000 rpm, supported by inner cooling at 13 bar. Consider the opportunity to buy this DOOSAN DNM 5700 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: used, Used Netzsch approximately 1,000 litre stainless steel vertical jacketed mixing vessel. Unit has welded flat top and bottom heads. External jacket rated 3 bar working pressure. Unit has top entry stainless steel anchor type agitator with drive and stainless steel high shear agitator with drive. Unit is mounted on (4) legs with forklift attachment. Specifications: Capacity: 264.2 gal Type Of Heads: Flat top and bottom heads Vertical/Horizontal: Vertical Legs/Lugs: 4 legs with forklift attachment Ibsdjxnl Iyopfx Ag Nec

Condition: excellent (used), Year of construction: 2014, USED HANKOOK VTC140E – YOM 2014 – Serial Number 44L09842 - TWW Cat 7962 Ijdpferur Nmox Ag Njbc MACHINE CONSTRUCTION & FEATURES • Ram Type Vertical Boring & Turning Machine with C-Axis & Driven Tools. • Heavy-Duty Cast-Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Hardened & Ground Slideways to Provide Increased Stability & Rigidity. • 2 Step Automatic Gear Change. • 24 Position Tool Magazine. INCLUDED FACTORY FITTED MACHINE OPTIONS • Chip Conveyor & Chip Bucket • 30 Bar Through Spindle Coolant System • Measurement System C-Axis Scale • Transformer • Hydraulic 3-Jaw & Manual 4-Jaw Combination Chuck With4 Manual Adjustable Jaw Bodies • Automatic Tool Setting Device TOOLING INCLUDED • DINE Tool-changeable Angular Milling Head with 40 ISO Output • 2 Off Sandvik Capto C6 Turning Toolholders with Two Outputs (V & H) • 1 Off Sandvik Capto C6 Axial Turning Head • 7 OFF BT50 Driven Toolholders • 1 Off Hankook TA12B4121015043 • 1 OFF Hankook TA12B412015142 • 1 Off Hankook TA12410000161 • 2 OFF Hankook TA12417010160 CAPACITY Maximum Turning Diameter - Ø 1,600 mm Maximum Turning Height - 1,400 mm Maximum Torque - 17,885 Nm Maximum Cutting Force - 3,000 kgf Maximum Workpiece Weight - 8,000 kg TABLE Table Diameter - Ø 1,400 mm Table Speed - 0.9 ~ 360 RPM Table Speed Range - Automatic 2 Step TABLE C-AXIS Minimum Index Angle - 0.001° C-Axis Cutting Feedrate - 0 ~ 1,200 Deg / Min Max. C-Axis Speed - 3.333 RPM RAM HEAD Tool Size - 32 mm² Spindle Taper - ISO 7/24 #50 Ram Cross Section - 220 x 220 mm MILLING SPINDLE Milling Spindle Speed - 30 ~ 3,000 RPM Max. Milling Spindle Torque - 235 Nm TRAVEL & FEEDRATE X-Axis Travel (Saddle Horizontal) - 1,600 mm Z-Axis Travel (Ram Vertical) - 900 mm Maximum X / Z-Axis Cutting Feedrate - 7,500 mm / Min X / Z-Axis Rapid Feedrate - 7,500 mm / Min ATC Type of Tool Holder - MAS BT 50 Tool Magazine Capacity - 24 (12T & 12M) Max. Tool Weight - 50.0 KGS MOTOR Table Motor (Cont. / 30 Min) - AC 37.0 / 45.0 kW Milling Spindle Motor Power - 15.0 / 18.5 kW X / Z-Axis Servo Motor - AC 7.0 kW C-Axis Motor - 7.0 kW POWER SOURCE Input Power Supply - 415V / 50HZ / 3PH Power Capacity - 80 KVA DIMENSIONS & WEIGHT Height - 5,535 mm External Width (With Chip Conveyor) - 6,760 mm External Depth - 4,565 mm Weight - 25,800 kg STANDARD SUPPLIED MACHINE FEATURES • Fanuc 32iA Control System • Through Tool Coolant • Table, Servo Drives & Motors • Through Spindle Coolant • 4 Jaw Independent Manual Chuck • Splash Guard & Safety Guard Rail • Automatic Tool Change System • X-Axis Slideway Protect Steel Cover • Lubrication Oil Cooler • Work Light • Hydraulic Power Unit • Levelling Blocks • Patrol Lamp (Red, Yellow & Green) • Automatic Guideway Lubrication System • NC Power Off • Coolant System & Wash Gun • Chip Pan • Electrical & Mechanical Manuals

Condition: excellent (used), Year of construction: 2017, Excellent Condition Table Diameter - 320mm Max Workpiece size - 400 x 300mm Table loading capacity - 200kg T-slot size - 12 x 90 Travel X/Y/Z - 400/650/485mm Ibedsxmhbajpfx Ag Nec Distance from spindle nose to table top - 0-485mm A axis travel (rotate along with X axis) +30 degree C Axis travel (rotate along with Z axis) 360 degree Spindle Spindle speed - Direct drive 12,000rpm Spindle taper - BT40 Spindle motor (cont./30min) - 11/15kW Spindle max. torque (cont./30min) - 70/95Nm Feedrate Linear guideway on X/Y/Z axis - Ball way 35/45/45 mm Rapid Traverse rate on X/Y/Z axis - 36,000 / 24,000 / 10,000mm/min Rapid traverse rate on A/C axis - 20/27rpm Cutting feedrate - 10,000mm/min Tool Magazine Tool Magazine - 24 pocket Max tool diameter / adjacent pocket empty - 80mm Max tool length - 300mm Max tool weight - 8kg Space requirement & weight Machine length x width 2950 x 2350mm Machine height 3140mm Machine weight 7200kg CNC Control - Fanuc 0MP Miscellaneous Pneumatic requirement - 6kg/cm power requirement - 40KVA coolant tank capacity - 400ltr

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 370 mm, table width: 320 mm, table length: 320 mm, table load: 300 kg, rotational speed (min.): 80 rpm, rotational speed (max.): 80 rpm, overall weight: 9,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 15,000 rpm, spindle motor power: 31 W, spindle nose: HSK 63A, tool length: 250 mm, tool diameter: 125 mm, tool weight: 8 g, control type: CNC control, Equipment: chip conveyor, Hermle C22U 5 Axis Machining Centre Siemens 840D Control 5 Axis Simultaneous XYZ: 450 x 600 x 330mm Iedpexpil Sjfx Ag Nsbc 320mm diameter table Maximum workpiece diameter 320mm maximum workpiece height 265mm Maximum table load 300Kg A axis -/+ 135 degrees spindle speed 15,000rpm 55 station tool changer Swarf Conveyor Coolant Tool Setter Spindle Probe

Condition: excellent (used), Dugard Mini Mill CNC Vertical Machining Centre Fanuc Oi, 4th Axis, 2011 Year: 2011 Model: MN965005 Ijdpfxexpnlqj Ag Nebc Control System: Fanuc Oi-MB X-Axis Travel: 450 mm Y-Axis Travel: 350 mm Z-Axis Travel: 380 mm Table Size: 700 × 320 mm Max Table Load: 150 kg Spindle Speed: 80–8,000 RPM Spindle Taper: BT‑40 Spindle Motor: Fanuc Version: 5.5 kW Siemens Version: 8.5 kW (specify if applicable) Toolchanger: 12-position Automatic Tool Changer 4th Axis: Included Rapid Feed Rate: 36 m/min Working Feedrate: Up to 10,000 mm/min

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 2930 mm Measurements depth 3210 mm Measurements height 2900 mm Machine weight 9200 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 28000 rpm Spindle motor power 38/28 kW Tool taper HSK-A63 Number of axis 5 Movement X-Axis Movement 450 Y-Axis Movement 600 Z-Axis Movement 400 Table Outer length 400 mm Outer width 400 mm Number of tslots 5 Distance between 63 mm Media Chip conveyor Yes Internal cooling Yes Iedpfxoxn U A Ho Ag Nobc Additional Equipment Tool Storage Capacity: 30 tools /Max Tool Weight: 6 kg / Max Tool Diameter: 80 mm / Max Tool Length: 250 mm Graphite Dust Collector Heidenhain Touch Probe TS 649 3D Quick Set for 5-Axis Calibration This 5-axis DMG DECKEL MAHO HSC 55 linear vertical machining centre was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO HSC 55 linear vertical machining centre if you are looking to get high quality milling capabilities. Contact us for more information about this machine. Application Types Milling

Condition: used, Used Pfaudler model CE10000 vertical glass lined reactor. Approximately 10,000 litre capacity. Internal rated 6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 7.5 bar/full vacuum design pressure at -29 to 200 deg.c. Unit has welded dished top and bottom heads. Top entry 3-blade retreat curve agitator with Pfaudler VSO gearbox and drive. Unit has mild steel mounting ring. Specifications: Capacity: 2,641.7 gal Material of construction: Glass lined, External mild steel jacket Ijdpfx Aoxm T Hbjg Nobc Internal pressure: 87 PSI Jacket pressure: 108.778

Condition: like new (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL Isdpou A U Nkjfx Ag Nsbc X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG

Condition: used, machine/vehicle number: 008139, X axis working area: 2500 mm Y axis working area: 920 mm Main Electrospindle power: 10.3 KW Ibedew R R Ufepfx Ag Noc Number of controlled axes: 3 axes Total number of drilling spindles: 15 Total number of tool changer positions: 4

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: C-261-04-2523, feed rate X-axis: 9,000 m/min, saw blade diameter: 100 mm, rotational speed (max.): 12,000 rpm, Submitting a bid obliges you to collect the item by the deadline of 14.10.2025! TECHNICAL DETAILS Ibedexhgk Ajpfx Ag Nec Edge Processing Edge type: Straight edges Edge material: Cut-to-size strips, lip cuts, coil material Feed speed: 9 m/min Edge material thickness: 0.4–3.0 mm Lip thickness: 0.4–3.0 mm Edge material height: 55 mm Coil diameter: 800 mm Rotation speed: 12,000 rpm Max. tool dimensions: 100 × 62 × 30 mm Extraction port Ø: 120 mm Workpiece Data Workpiece thickness: 8–50 mm Positioning accuracy: 0.1 mm Edge Banding Edge type: Straight edges Edge material: Coil material Max. tape cut: 3 × 30 mm or 0.8 × 45 mm Operating pressure: 6 bar Edge Glue Applicator Rotation speed: up to 1,800 rpm End Trimming Unit Motor speed: 12,000 rpm Saw blade diameter: 100 mm Cutting width: 2.6 mm Bore diameter: 32 mm Workpiece thickness: 45 mm Max. edge material height: 3 mm Edge material angle: 0–15° Edge material cross-section: 135 mm² Flush Trim Unit Rotation speed: 12,000 rpm Max. workpiece thickness: 8–50 mm Max. edge thickness: 3 mm Straight tools: 2 × WPL milling cutter Ø 50 × 12 × 16 mm, z = 4 Combination tools r = 3 mm: 2 × Trimmer Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Fuse protection: 16 A Control voltage: 24 V

Condition: excellent (used), Year of construction: 2014, XYZ 1020 Vertical Machining Centre Siemens 828D Control Manufactured & Installed in 2012 24 Station Too Carousel 8k Spindle Machine Capacity: Table Size: 1120 x 500 X Axis Travel 1020mm Y Axis Travel 520mm Z Axis Travel 540mm Rapid Traverses 20,000m/min Spindle: Spindle Speeds – 8,000ppm Tool Shank ISO40 Tool Storage Capacity 24 Tools Spindle Power 20Hp For sale with Jet Machinery Ltd Machine Serial Number: SMU00143 Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.   Ibedpfx Aoxndrdjg Nec

Condition: ready for operation (used), Year of construction: 2012, operating hours: 37,513 h, General Data Machine weight 9500 kg Main Drive Tool taper BT40 Number of axis 3 Movement X-Axis Movement 762 mm Y-Axis Movement 516 mm Z-Axis Movement 570 mm Tools Number of index 40 This 3-axis DOOSAN VC 510 was manufactured in 2012. It features a twin pallet vertical machining centre with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining centre. Contact us for more information. Ibedpsxg Ui Defx Ag Njc Application Types Milling

Condition: used, Used approximately 150,000 litre stainless steel vertical tank. Unit measures approximately 4000mm diameter x 11500mm straight side. Has welded dished top and flat bottom heads. Specifications: Capacity: 39,625.7 gal Ibodpfx Agoxlgits Nec Diameter: 13.12' Height: 37.73' Type Of Heads: welded dished top and flat bottom heads Vertical/Horizontal: vertical Type of stainless: Stainless steel

Condition: ready for operation (used), travel distance Z-axis: 700 mm, feed length X-axis: 1,250 mm, feed length Y-axis: 650 mm, controller manufacturer: Fanuc, total length: 5,000 mm, total width: 4,256 mm, empty load weight: 10,500 kg, rotational speed of tool magazine (max.): 4,500 rpm, Type: MCV-1250 min/max distance between spindle and table: 200 900 mm Ibodpfx Agoxpgg To Nec high pressure cooling through spindle Table dimensions: 1400 x 820 mm Max weight on the table: 1500 kg Depth of throat (uprights-spindlecenter): 710 mm Admission in spindle (ISO): BT 50 Power on the spindle: 15 kW Toolchanger: yes Number of toolholders: 24 positions

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29,083 h, General Data Machine weight 9500kg Control Unit Brand FANUC Main Drive Spindle speed range 10000 Tool taper BT40 Number of axis 3 Movement X-Axis Movement 762 mm Iodpfx Agsxg Ui Rj Nsbc Y-Axis Movement 570 mm Z-Axis Movement 570 mm This 3-axis DOOSAN VC-510 was manufactured in 2013. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. The machine includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC-510 vertical machining center. Contact us for more information. Application Types Milling

Condition: used, Used DeDietrich model CE10000 vertical glass lined reactor. Approximately 10,000 litre working capacity & 11,710 litre total capacity. Internal rated 6 bar/full vacuum design pressure at -25 to 200 deg.c. External mild steel jacket rated 6 bar/full vacuum design pressure at -25 to 200 deg.c. Unit has welded dished top and bottom heads. Top entry 3-blade retreat curve agitator with drive. Unit is mounted on (4) legs. Specifications: Capacity: 2,641.7 gal Material of construction: Glass lined, External mild steel jacket Internal pressure: 87 PSI Jacket pressure: 87 Ibjdpsxlgigjfx Ag Njc Legs/lugs: 4

Condition: ready for operation (used), Year of construction: 2016, operating hours: 39,293 h, Movement X-Axis Movement 711 Y-Axis Movement 406 Z-Axis Movement 394 This 3-axis HAAS DM-2 vertical machining center was manufactured in 2016. It features extensive use with 39,293 power-on hours, 11,081 cycle start hours, and 6,377 feed cutting hours. The machine offers a travel range of 711 mm on the X-axis, 406 mm on the Y-axis, and 394 mm on the Z-axis. Consider the opportunity to buy this HAAS DM-2 vertical machining center. Contact us for more information. Ibsdpfx Agoxgv Ubo Noc Application Types Milling

Condition: used, Used GEMS approximately 56.8sqmt 316L stainless steel horizontall shell and tube heat exchanger. Unit has (260) 316L stainless steel tubes which measure approximately 19mm diameter X 3,650mm long 300 litre capacity, rated 9 bar design pressure at 80 deg.c. 316L stainless steel shell which measures approximately 500mm diameter X 3650mm long 420 litre capacity rated 2 bar/full vacuum design pressure at 120 deg.c. Unit has 316L stainless steel heads. Has bottom mounted support lugs. Last used as a shell condenser. Ibedoxlgg Ejpfx Ag Nec

Condition: ready for operation (used), Year of construction: 2014, operating hours: 28,446 h, Control Unit Brand FANUC Movement X-Axis Movement 762 Y-Axis Movement 516 Z-Axis Movement 570 This 3-axis DOOSAN VC 510 was manufactured in 2014. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining center. Contact us for further details regarding this machine. Application Types Ijdpsxgv T Defx Ag Nobc Milling

Condition: used, Used Wefco 58500 litre total capacity 304L stainless steel vertical mixing tank. Unit measures approximately 3370mm internal diameter x 6165mm straight side. Has bolted flat top and welded dished bottom heads. Internal rated -6/+56 mbar at 0-50 degC. Includes internal coil rated full vacuum/4.5 bar design pressure. Includes top entry 2-tier 4-blade pitched paddle agitator direct driven by 5.5kw 3/50 1455/47 rpm SEW-Eurodrive motor and gearbox. Also includes 4-baffles. Mounted on (3) lugs. Specifications: Capacity: 14,505.9 gal Diameter: 11.05' Height: 20.22' Type Of Heads: Bolted flat top, Welded dished bottom Vertical/Horizontal: Vertical Ibjdpfjxgfuqjx Ag Nsc Type of stainless: 304L Legs/Lugs: 3 lugs

Condition: ready for operation (used), Year of construction: 2017, operating hours: 656 h, Control Unit Model SIEMENS 840D Solution Line Main Drive Spindle speed range 12000 Iodpfxsxpkp Ej Ag Nobc Tool taper SK40 Number of axis 3 Movement X-Axis Movement 1150 mm Y-Axis Movement 700 mm Z-Axis Movement 550 mm Tools Slots in storage 30 Media Oil water separator Yes Chip conveyor Yes Internal cooling Yes Additional Equipment Spray gun IKZ (20 bar) Oil mist extractor Machine cabin roof Touch Probe Heidenhain TS 649 Electronic handwheel Chip Conveyor This DMG MORI DMC 1150V 3-Axis Vertical Machining Centre was manufactured in the year 2017 in Germany and has 656 spindle hours. It is equipped with a DMG MORI / SIEMENS 840D Solution Line control unit and a 12,000 rpm spindle with SK40. The machine comes with chip conveyor, IKZ (20 bar), oil mist extractor, machine cabin roof, touch probe Heidenhain TS 649 and electronic handwheel. Contact us anytime for further questions! Application Types Milling

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs. Specifications: Iedpjxgft Tjfx Ag Nsbc Capacity: 1,320.9 gal Material of construction: Glass lined steel Internal pressure: 96 PSI Jacket pressure: 95.9753 Legs/lugs: 0

Condition: used, Used SRI BV approximately 3sqmt stainless steel vertical shell and tube heat exchanger. Has (27) 15mm inside diameter X 2,400mm long tubes 25 litre capacity rated -1.034/10 bar design pressure at 175 degC. 150mm diameter X 2,400mm long shell 26 litre capacity rated -1.034/10 bar design pressure at 175 degC. Unit has (2) bolted stainless steel heads. Mounted on (2) lugs. Last used as an beer column condenser. Equipped With: Ijdpfexgftgsx Ag Nsbc Per RD 17/06/25 updated description & raised price.

Condition: used, Used Schenk model ZHF-S70-Z-C3 stainless steel pressure leaf filter. Unit measures approximately 2400mm straight side X 1350mm diameter. Has (60) 1200mm diameter horizontal filter/scavenge elements on 30mm spacing. Total approximately 70 square meter filtration area with approximately 1850 litre cake capacity. Filter elements bottom driven by a Hydrokraft model PVG 130-ES/11 hydraulic drive with a 37 kW, 415 volt, 1400 rpm, 3 phase, 50 HZ motor. Unit has an approximately 200mm slurry outlet. Welded dished bottom and clamped dished top head. Approximately 4300 litre capacity rated 9 bar design pressure at 20°C. Material of construction 321/304 stainless steel. Mounted on (3) legs. Also includes a 3000 litre 304 stainless steel Kieselguhr discharge tank rated 0.5 bar at 20°C. And a Kieselguhr Dosing tank with a 2-tier 2-blade pitched paddle type agitator driven by a 1.1 kW motor. Dosing tank includes feed pump driven by a 1.4/1.8 kW, 415 volt, 1410/2870 rpm, 3 phase variable speed motor. Iodpfxsxgftao Ag Nobc