Used Weber Srv 62 for sale (107)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs Gedoyhcabepfx Akhsui - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: excellent (used), Year of construction: 2006, Weber skinning and demembrane machine, type: ASB 560, number: 198, year of construction: 2006, 400 V, 50 Hz, 1.1 kW, weight: 400 kg, plastic belt, belt width: 500 mm, working width: 500 mm, total dimensions: 2100 mm x 1000 mm x 1250 mm. No unwinding roller or knife. Gsdpfov T R U Hex Akhjui

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, power: 44.7 kW (60.78 HP), Technical Data: Operating height: 900 mm Operating width: 1350mm Max. workpiece thickness: 99mm Guodpfx Akownw E Tshei Min. workpiece thickness: 0.8mm Dimension of the machine: Weight: approx. 4800kg Width: approx. 2800mm Length: approx. 3460mm Height: approx. 2440mm We bought the machine in 2020 and refurbished it. It comes with a new conveyor belt.

Condition: good (used), For sale: a complete set of Weber-Hydraulik hydraulic rescue tools. The set includes a SP-40 hydraulic power unit, cutters, and a spreader. The entire set is mounted on a metal transport frame and equipped with reels containing hoses. The set has been inspected and is in 100% working order. The visual condition and detailed scope of equipment are shown in the photos. Data read from the nameplates: Gujdpfx Ajz Skyijkhoi Power unit manufacturer: Weber-Hydraulik Power unit type: SP-40 TÜV marking: SP32-95-TP18/SP30 Engine: ATB AKF 90S/2F-12R Engine power supply: 230 V, 50 Hz Engine power: 1.3 kW Rotational speed: 2760 rpm Engine protection rating: IP54

Year of construction: 2003, condition: ready for operation (used), A complete cheese cutting and portioning line with one slicer, one scale and conveyor units is available. Products: meat/cheese/sausage/vegan products, slice thickness range: 0.1mm-5mm, max. product length: 1200mm, max. cutting width: 360mm, blade type: circular blade, blade diameter: 460mm, cutting angle: 22°, max. weighing capacity: 100weighings/min, machine dimensions X/Y/Z: approx. 2500mm/1600mm/2300mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Gsdpjyx H E Djfx Akhsui

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Guedpfx Aox Twcpjkhji

Condition: excellent (used), CATALOGUE NUMBER 7910 TECHNICAL DATA - max. width of the workpiece: 1350 mm - max. height of the workpiece: 150 mm – from above: - rubber roller, pressure roller I unit (fluted metal roller for calibration) II unit (two smooth metal rollers + sequential shoe) - rubber roller, pressure roller - cleaning brush – from below: - metal infeed roller Gedpfs Af Iniox Akhoui - conveyor belt - metal output roller, slip roller - pneumatic oscillation of the belts using photocells - electric table lifting - 2 types of feed speeds: 2-14 m/min - main motor: 5.5/15 kW - brake - grinding height potentiometer - feed motor: 0.75 kW - working pressure: 8 bar - diameter of the dust extraction nozzle: 200 mm, 120 mm - dimensions (L/W/H): 1860x2200x1980 mm - weight: 1995 kg ADVANTAGES – made in Germany – unpainted – DTR documentation – used grinder, very good condition Net price: 38,900 PLN Net price: 9,040 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to currency fluctuations)

Condition: good (used), Year of construction: 1991, Brand: Hans Weber GmbH Model: DS 120 Year of manufacture: 1991 Screw diameter: 120 mm Guedpfszu Nl Aex Akhoi • One pair of original WEBER screws (in excellent condition, including measurement report) • One pair of non-original screws • Gearbox inspected and partially overhauled by WEBER • Control system upgraded to WPS control • Output on PVC approximately 700 kg/hour

Condition: good (used), Year of construction: 1989, machine/vehicle number: NE 60 053, Brand: Hans Weber Type: NE 60 Serial No.: NE 60 053 Year of manufacture: 1989 Guedpfx Aeylv A Rokhei

Condition: good (used), Year of construction: 1994, Model: NE 12 Screw type: Single screw Year of construction: 1994 Screw diameter: 130 mm L/D ratio: 30 L/D Drive power: 350 kW Including: • Machine was in production when dismantled • Machine was producing 710 mm pipes • Output on HDPE approximately 1,000 kg/hour Gedpfx Akeyxpbuehjui • 800 mm extrusion head

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine Gjdpfx Asfp A I Eekhsui More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Label gap Minimum 3 mm Label roll 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Condition: like new (used), Extruder hose sections for Weber DS 10.22. Guedpfxshlvm Nj Akhsi

Year of construction: 2000, condition: used, Vibrating plate, vibrator, vibration plate, soil compactor, construction vibrator Gedpehx E Ukjfx Akhsui -Manufacturer: Weber, vibratory plate type TC 66 S -Motor power: 6.3 kW -forward/backward- lever position reversed -Engine: Hatz small diesel engine type 1D41S -Operating weight: 430 kg -Dimensions: 900/580/H1450 mm -Total weight: 454 kg

Year of construction: 2001, condition: excellent (used), Single screw extruder WEBER NE5 1-30:D with 2 co-extr. WEBER ZE30 Year of construction 2001 Screw diameter 50 mm Guodpfx Aehy Tp Dskhsi Application:PE-PP, Three-layer pipes or pipes with colored stripes The plant has manufactured heating pipes Condition: very good 2 Co-Extruders WEBER ZE30 Screw diameter 30mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Condition: used, Year of construction: 1990, Used Weber wide belt sanding machine with 2 sanding belts, oscillating. Infinitely variable feed speed. Sanding width 900 mm. Used as a backup machine. Guedpfx Akowzlqkehei

Condition: ready for operation (used), Weber 1117033 04.07 screwdriving unit 438612/KW - Length: 48 cm, used, in good condition, 100% functional, delivery as shown in the photos. Guedpfxsz Adkce Akhoi

Condition: like new (used), Quantity: 2 Gusdpst H Rrzjfx Akhji 2x WEBER DS 88 - 17D complete original processing units Complete conversion kit from the old degassing position to the upstream degassing position - suitable for PVC window recipes, dryblend processing - Enlarged preheating zone - all parts unused in original packaging Location: Pirmasens We will be happy to send you further information on request.

Condition: good (used), Year of construction: 2006, functionality: fully functional, total length: 2,200 mm, total width: 1,300 mm, total height: 1,800 mm, overall weight: 450 kg, input voltage: 400 V, input frequency: 50 Hz, Skinning and strip cutting machine Gujdpev Abyljfx Akhoi Brand Weber, Model ASL 560 Number: 110, Year of construction: 2006, Voltage 400 V, 50 Hz, Power 1.1 kW, Weight: 450 kg, plastic belt, belt width: (1x) 500 mm, (1x) 300 mm, 17 knives, distance between knives: 30 mm, overall dimensions: 2200 mm x 1300 mm x 1800 mm. Includes additional parts and knives.

Condition: like new (used), Year of construction: 1990, WEBER OFZ-2-1350 wide belt sanding machine working width: 1350 mm number of units: 2 1: calibrating roller with an 18.5 kW motor 2: unit with a sanding shoe, 11 kW Gujdpfx Aksgm Tqwehji sanding shoe with adjustable pressure sweeping brush stepless feed rate adjustment machine weight: 2700 kg

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, table load: 20,000 kg, spindle speed (max.): 3,500 rpm, number of axes: 3, This 4-axis Burkhardt-Weber MC100 was manufactured in 1998. It features a working range with an X-axis travel of 3,000 mm, Y-axis travel of 2,500 mm, and Z-axis travel of 1,500 mm. The machine has a maximum table load capacity of 20,000 kg and a spindle speed of 3,500 RPM. If you are looking to get high-quality milling capabilities, consider the Burkhardt-Weber MC100 horizontal machining centre we have for sale. Contact us for further details. • B-axis (NC rotary table): 360° continuous • Tooling standard: High-torque configuration for large-scale milling • Additional notes: • Retrofitted in 2008 Gsdpfezg Il Eex Akhsui Technical Specification Taper Size BT 50

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 Gsdpfew Dbkrex Akheui -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t -Hole: Ø 20 mm -Quantity: 2x set available -Price: per set -Dimensions: 740/220/H140 mm -Weight: 11.1 kg/piece

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Gsdpfx Ajxf Up Ujkhsui Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: good (used), Year of construction: 1990, loading capacity: 2.000 Kg. Godpfx Aoid Sgmokhsui diameter of decoiler: 1.400 mm outside diameter of coil: max. 1.300 mm inside diameter of coil: min. 400 mm hight of the coil: max. 800 mm

Condition: as good as new (ex-display), The scope of delivery includes: 1x waste container, grade II Manufacturer: Weber Depth, lid closed: 755 mm Depth, lid open: 770 mm Height, lid closed: 1,320 mm Overall width: 1,350 mm Capacity: 360 kg Volume: 770 liters Additional data / information: Material color, container: black Material color, lid: yellow Usable width: approx. 1,085 mm Usable depth: approx. 640 mm Usable height: approx. 1,000 mm Material: Polyethylene (PE) Gsdpfeku Aw Njx Akhoui Tires: 4 tires (2 with brakes) Unladen weight: 68 kg Note: Usable width and usable depth taper towards the bottom. General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Year of construction: 2018, condition: new, loading capacity: max. 1.000 Kg. coil inside diam.: min. 400 mm coil outside diam.: max. 1.100 mm Guodpfjdx Ryyex Akhoi coil hight: max. 800 mm