Used Wedge for sale (468)

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Pgsdpfx Aeif Sg Seh Aeu Net weight: approx. 800 kg

Year of construction: 2025, condition: as good as new (ex-display), Universal testing machine PM10 Force: 10 kN cross beam stroke: 700 mm Installation space: 400 mm total height: 1230 mm Weight: ca.85 Kg Pgodpfsd R Dpmex Ah Asu Travel resolution: 0.01 mm testing speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 10kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Year of construction: 2018, condition: excellent (used), The wedging and coring machine OS12 for citrus has been designed to core and slice oranges into segments. The structure consists of a rotating plate with 8 workstations for fruit. Above the plate, on the opposite side to the loading side, we find the mechanisms for the two operations. The first mechanism moves up/down by means of a pneumatic piston and allows rotation of the coring tube by means of a three-phase electric motor. Pgsdpewdgp Tjfx Ah Asu The core tubes are interchangeable. The second mechanism always moves up/down by means of a pneumatic piston and is equipped with pads that push the fruits through the die-cutters, allowing them to be cut into wedges. The plate rotates at regular intervals and at the speed chosen by the customer; when the plate stops, the three work operations take place at the same time: the operator loads the fruit and the two mechanisms perform the coring and cutting operations. The OS12 machine consists of welded tubes, on wheels (with brakes) to allow easy movement. The machine is equipped with a stainless steel electrical panel with PLC and inverter for the synchronization of operations. Advantages: • High cutting quality • Very robust machine structure • Compact size • Simple and fast maintenance of the machine • Easy sanitation • Electrical panel built according to EEC/IP 65 standards • Option: self-locking rotating wheels It is equipped with: 2 Slides for the product and for the waste.

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Manufacturer: Bilz, fixators for machine tools and systems Pjdswziq Iepfx Ah Asgu -min. height: 65 mm -max. height: 75 mm -Number: 4 fixators available -Price: per piece -Dimensions: 215/100/H70 mm -Weight: 6.6 kg/piece

Condition: new, loading space length: 8,000 mm, loading space width: 1,350 mm, loading space height: 450 mm, color: red, Year of construction: 2024, Color: Red Manufacturer: Goldhofer Type: Crawler Deck / Spinebed BB 450 A Chassis Number: 2100788 Year: 2024 – NEW / Unused Psdpfxovnb Nwj Ah Aegu General - Extendable, from 8,000 mm to 13,000 mm - Payload rating: 100t / 120t in 4+6 combination - Platform height: 450 mm; length: 8,000 mm, width: 1,350 mm - Extension in 500 mm increments - Rear lashing coupling for connection to THP bogies - Front claw couplings for connection to gooseneck or claw coupling adapter - Integrated supply lines for hydraulics, brakes, and electrics with connection couplings - Approximate weight: 14,400 kg Load securing - 1 pair of lashing rings (LC = 30,000 daN) in the rear coupling head - 8 pairs of lashing rings (LC = 20,000 daN) mounted outside on the main beam Side extensions - Fold-out outriggers and inserts on the main beam (basic length) - Fold-out side extensions and mattresses on the inner tube 1 x Quick coupling adapter THP/SL For connecting deck coupling claws to modular bogie coupling lugs or a gooseneck Dead weight: 1,600 kg 1 x Drive-on wedges for excavator deck, steel version (4 pieces) Weight: 360 kg = Further Information = General Information Year of manufacture: 2024 Weights Unladen weight: 14,400 kg Payload: 120,000 kg Gross vehicle weight: 134,400 kg Functional Loading platform height: 45 cm Extendable superstructure: Yes Condition General condition: very good Technical condition: very good Visual condition: very good Financial Information Price: On request Further Information Contact Stefan Schaapveld for more information.

Condition: excellent (used), functionality: fully functional, power: 51.48 kW (69.99 HP), color: orange, Year of construction: 2019, Equipment: all wheel drive, hydraulics, KÄRCHER MIC-70 Municipal tool carrier with winter service equipment Equipment: Pgjdpfx Ahsxbf Tpe Aou 1. KUGELMANN VS 150/74 wedge-vario snow plough 2. FIEDLER FWS-200 combination box spreader with control panel 3. Flatbed with tarpaulin structure This KÄRCHER MIC-70 tool carrier was manufactured in 2019 and has only 402 total operating hours and 114 hydraulic hours (according to the counter). The machine is in very good overall condition with the typical signs of use and wear for this equipment class. - Net price: €46,134 // Gross price: €54,900 - Inspection / test drive welcome - Nationwide shipping can be arranged; costs depend on distance! - We are happy to provide you with an attractive leasing or financing offer through our leasing partner!

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift Pjdpfx Ahjhx R Ete Ajgu - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Cc7d2rmq Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: Pedpfxsfdzupj Ah Ajgu - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: used, mileage: 56,000 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, overall weight: 5,900 kg, first registration: 12/2018, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Your authorized ISUZU specialist dealer with expertise, service, and consulting offers you: ISUZU NMR with skip loader, wedge-vario snowplow blade, and silo spreader First registration: 21.12. Mileage: 56,000 km Net / export price: €58,500.00 Condition: Inspection, oils, filters, and wear parts replaced, workshop-tested, fully serviced both technically and visually, well-maintained overall condition Equipment: Pgodpfx Ahovuc Sms Aeu - 3.0-liter turbo diesel with common rail direct injection, 110 kW / 150 HP, EURO VI OBD-C (max. torque 375 Nm at 1,600 – 2,800 rpm) - Engine brake - 5-speed manual transmission - ABS with EBD and electronic traction control on rear axle (ASR) - Electronic vehicle stability control (EVSC) system - Lane departure warning - Wheelbase 2,750 mm, tires 205 / 75 R16 C, single tires front, twin tires rear - Cab width 1,815 mm, rear axle width 1,880 mm, height 2,180 mm (top of cab without lights) - Suspension driver seat, double passenger bench, 3-seater, headrests - Electric windows, electrically adjustable and heated exterior mirrors - Electronic immobilizer - Radio with Bluetooth hands-free system - Air conditioning - Digital tachograph - Fog lights, daytime running lights - Driver airbag - Height and tilt adjustable steering wheel, interior mirror - Central locking with remote control - Spare wheel Bodywork: Skip loader body JOTHA CombiCon 3512 - Thanks to its clever container concept, in addition to standard mini containers (1–3 m³) and containers according to DIN 30735, flat containers sized 1,220 x 2,400 mm and pallets can also be picked up and transported - Equipped with two independently controlled telescopic lifting arms, extension 1,000 mm – hydraulic rear support - Container stops: double at the front and quadruple on the sides, adjustable – ground-level lifting capacity: 3,500 kg - Hydraulic tipping hook - Length-adjustable galvanized chain slings with safety latch hooks for container pickup - High-level emptying is optionally carried out via the JOTHA pivot bolt system or with lifting cables. Thus, transfer into large containers is possible. - Body width: 1,700 mm, clear passage between telescopic arms: 1,400 mm - Tail lights protected - Color: Carmine red - Protective grille behind cab rear wall, galvanized - Lifting cables with latch hooks for high-level container emptying - Pivot bolt strip with pivot bolts for emptying flat containers and standard containers - Tool box with lockable lid at the front of the skip loader, removable aluminum structure for easy access when using the flat container, approx. dimensions: 1,200 x 600 x 250 mm, lockable Additional vehicle features: - Engine-driven universal hydraulic system with 2 double-acting control circuits front/1 working circuit rear, engine-dependent gear pump, hydraulic oil cooler - 4 hydraulic connections at the front (lift/lower/swing/floating position) - Hydraulic front lift FIEDLER with quick-change plate, mounting frame - Front axle lift - Underside & chassis protection - “Extra package” (rubber floor mats, luggage nets for overhead storage trays) - 3.5 t tow ball coupling, 13-pin trailer socket - M+S tires 205 / 75 R16 C - Additional headlights with dip function (for front-mounted implements) - Rotating beacon, telescoping - Rear work lights - Warning markings Including attachments: - Wedge-vario snowplow SIMED PVS 190, year of manufacture ,2.0 m wide, clearing width approx. 1.90 m at an angle, hydraulically pivoting with rubber scraper

Condition: good (used), Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, screw jack Pgsdpekahkgsfx Ah Asu -Height adjustable: 320-390mm -Number: 24x Fixators available -Price: piece -Dimensions: Ø 360/H370 mm -Weight: 41kg/pcs

Condition: new, Year of construction: 2025, Device description The splitter has an overload valve that drains oil to the tank and an efficient, failure-free gear pump. The tree lifting system makes it easier to place heavy materials directly under the splitting wedge 5-pin power connection The wedge set at an angle makes it easier for the wedge to sink into the material. FAILURE-FREE HYDRAULIC PUMP 24l! Technical parameters Pressure force 22 TON Minimum wood diameter 80 mm Maximum wood diameter 700 mm Minimum wood length 350 mm Maximum wood length 1100 mm Splitting speed (continuously adjustable) 10.5 cm/s Return speed 7.5 cm/s Wedge stroke length 948 mm Total engine power (S1;S6) S1:5.1 kW S6: 6.6 kW Podpfx Ahownxcme Asgu Voltage 400 V Hydraulic tank capacity 24 l Hydraulic system pressure 27.7 Mpa Dimensions 1050 x 1550 x 2500 mm Weight approx. 320 kg

Condition: good (used), functionality: fully functional, power: 51.48 kW (69.99 HP), color: orange, fuel: diesel, Year of construction: 2016, Equipment: all wheel drive, KÄRCHER MIC-70 Municipal implement carrier with winter service equipment Accessories: 1. KUGELMANN V170/74 wedge-vario snow plough with a maximum clearing width of 170 cm 2. KUGELMANN silo spreader with 600 l capacity and control panel This KÄRCHER MIC-70 implement carrier was manufactured in 2016, has a total of 2,840 operating hours and 1,476 hydraulic hours according to the hour meter, and is in overall good condition with the usual signs of use and wear typical for this machine class. - Net price: €25,126 // Gross price: €29,900 Pgsdsxbf Imjpfx Ah Aju - Viewing / test drive welcome - Nationwide shipping can be arranged; cost depends on distance - Attractive leasing or financing offers available through our leasing partner, on request!

Condition: used, Clamping table, sine table, tilting table Tilting clamping table Table length: 1130 mm Table width: 300 mm Table height: 112 mm Tilting angle: 2° Tilting angle max.: 7° - Tilting angle 2° via leadscrew Pjdpfsinldpjx Ah Aegu - Max. tilting angle 7° manually lifted to stop Overall dimensions L x W x H: 1450 x 300 x 112 mm Weight: 275 kg Good condition Clamping plate, ideal for production of wedge strips

Year of construction: 2025, condition: as good as new (ex-display), Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: Pgodpfx Ahod R Dpuj Aeu - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: P 648, control type: CNC control, oil tank capacity: 290 l, overall weight: 9,500 kg, power: 11 kW (14.96 HP), Built for a globally leading cooperation partner. Last machine from the pool. Machine is as good as new. The High Quality Press Brake (HQPB) is the top model among Placke press brakes. The entire manufacturing process, from the hydraulic cylinder to electrical cabinet construction, is carried out in-house. By combining state-of-the-art technology with decades of experience in forming technology, the HQPB series allows you to perform bending at the highest level. The standard configuration already provides a fully functional press brake. With this package of safety, reliability, and efficiency—paired with user-friendly operation—we are able to meet the highest demands and precision requirements in the bending process. Machine Frame: Pgjdjw Nhhgopfx Ah Aeu - Base machine constructed from steel S 355 N - Side frames welded with 2 pressure pipes and top-mounted oil tank - Above-floor design - Coating (2-component textured paint), light grey (RAL 7035) and signal grey (RAL 7004) Upper Beam: - Press beam stress-relieved annealed - Depth penetration measurement, reader head guided by ball roller guide - Separate Y1 and Y2 control, electrical angular misalignment monitoring Hydraulic System: - Hydraulic proportional control valve system with electronically monitored cylinder parallelism - Solid steel cylinder with inductively hardened piston rod - Low-noise internal gear pump Punch Clamping: - Upper tool holder system WILA, hydraulic clamping system, type NSCL-II-HC, fully hardened, max load: head bearing = 250 t/m, shoulder bearing = 300 t/m Lower Beam: - Narrow table incl. manual clamping bar, dimensions: 95 mm high, 95 mm wide - Centrally adjustable crowning system, WILA system, CNC controlled, NSCR-I-MC. Two mechanically adjustable wedge bars compensate for deflection - Single-V die holder (13x20) - Working height: 1050 mm (with 55 mm tool height) Front Side of the Machine: 2 aluminum support arms in the front, approx. 600 mm long, incl. 2 tilting stops, measuring tape, and plastic wear strip. The support arms are movable on a linear ball guide and can be height adjusted for 55 mm to 100 mm high dies using a slotted hole. The linear ball guide is milled into the lower beam. Control and Regulation Technology: - Operating voltage 400V / 3Ph / 50Hz - Switching and safety components by Telemecanique - Backgauge with AC servo technology - Pilz safety PLC Backgauge "2-axis controlled": - X- and R-axes CNC controlled - Z-axis manual Delem DA 66 Touch control on swivel arm incl. Profile S-Lite offline programming software. Safety equipment according to CE standards Technical Data and Working Range: Press force: 1250 kN Working length: 3100 mm Clearance between uprights: 2600 mm Installation height: 450 mm Throat depth: 305 mm Ram stroke: 265 mm Ram Speeds: Rapid traverse max: 220 mm/s Pressing speed max: 9.8 mm/s Return speed max: 160 mm/s Ram positioning accuracy: ± 0.01 mm Ram tilt: ± 10 mm Electrically limited to ± 5 mm Lower beam height above floor: 900 mm Motor power: 11 kW Main Dimensions: Pit depth: 0 mm Side frame pit depth: 0 mm Machine weight: approx. 9.5 t Tank capacity (hydraulic oil): 290 l (Technical changes reserved) Lighting behind the machine: Workspace illumination using LED light strip between the uprights.

Condition: excellent (used), GALDABINI Type: Quasar 50 / Nominal Capacity: 50 kN with PC, monitor, and GraphWork 5 testing software Universal Testing Machine The "QUASAR" universal testing machines are designed as single-room testing machines and essentially consist of the following components: Machine frame. The design and structure of the machine load frame is designed where necessary for the specified maximum loads: Electromechanical load application with toothed belt drive, toothed belt pulleys, drive with DC or brushless servo motor, and recirculating ball screws. Pgedpfx Aev Tywqeh Aeu Load measuring system with load cell suitable for tension and compression. Electronic control unit that performs all functions: Regulation and control, monitoring, and recording of the output signals of the measuring amplifiers for force, strain, and crosshead travel. The system is based on a 32-bit processor with a clock speed of 25 MHz; The analog signals are acquired by an A/D converter with 20-bit resolution. The electronic control system is usually located in the base of the machine. This also applies to most of the electrical components of the drive and power supply. The operator interface is connected to the PC via an RS232 serial interface with a high transmission speed of 38400 baud. Rigid two-column system with a maximum capacity of 50 kN. Suitable for metals, plastics, composites, and other materials. Stylish design and advanced features. Flexible and modular design for easy future expansion. Key technical advantages include extremely high resolution of load and stroke values, as well as a minimum test speed of 0.0005 mm/min for the highest performance and most accurate results. Technical specifications: Nominal capacity: 50 kN Speed at maximum load: 0.0005÷200 mm/min No-load speed: 500 mm/min Distance between clamps: 1000 mm Total stroke: 1000 mm Crosshead travel resolution: 0.1 µm Positioning repeatability: 2 µm Distance between wedge clamps: 480 mm Clearance between columns: 410 mm Unit of force Newton - daN - kgf - Ibs Dimensions: Height: approx. 1548 mm Width: approx. 700 mm Depth: approx. 730 mm Power supply: 220V (+10%) 50 Hz Power consumption: 0.65 kW Weight: approx. 255 kg without accessories Recommended lighting during use: 300 lux Weight: approx. 255 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: Base jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing Pgedpfsr U Sfgox Ah Aou -Number: 4 sets of base jaws available -Price: per set -Total dimensions: 90/65/H35 mm / 90/67/H35 mm/ 90/70/H45 mm with screws -Total weight: 1.1 kg/set

Condition: used, functionality: fully functional, Manufacturer: Haaf (formerly Gema) Type: LZ 185 Swing diameter over bed: 365 mm, over cross slide: 225 mm Turning length: 750 mm Center height: 185 mm Spindle bore: 40 mm Speed range: 20 – 1,600 rpm Heidenhain VRZ 773 B digital readout in 2 axes (scales on cross slide, longitudinal slide and compound slide) Dimensions: 1,900 x 900 x 1,700 mm Weight: approx. 800 kg Features: - Spindle brake with foot pedal - Adjustable stop on cross slide (disengages feed) - Splash guard Accessories: - Operating manual - Multifix B tool holder with 2 inserts - Coolant pump integrated in machine base (no coolant hose connected) - Forkardt 3-jaw wedge bar chuck 200mm Pgedpfx Ajw Svtcsh Aeu - Albrecht drill chuck 1-13mm Total weight approx. 950 kg Condition: Used The machine runs smoothly and can be inspected under power.

Condition: used, Single-column Eccentric Press MÜLLER GEFREES Type 60 SV DK (Identical to ExP60) Very lightly used eccentric press in original condition Machine No. 5250686 Year of manufacture: 1986 Nearly new condition Press force: 60 tons Throat depth: 280 mm Table surface: 740 x 560 mm Ram surface: 385 x 200 mm Through-hole in table: 300 x 200 mm Table surface (intermediate plate): 740 x 560 mm Through-hole in intermediate plate: Ø 103 mm Intermediate plate thickness: 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Installation height, max.: 275 mm (with intermediate plate) Installation height, max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Strokes per minute: 100 Motor power: 3 kW Drive: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic actuation - Spring-loaded single-jaw brake, controlled by cam disc - Stroke release via pneumatic footswitch - Overload protection with breaking plate in the ram - Table height adjustment via 2 threaded spindles - Manual central lubrication system by BEKA Schmiertechnik - Operating manual and pneumatic diagram included Pjdpfx Aji A A Tboh Aogu Space requirement (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons In very good, almost new condition

Year of construction: 2024, condition: as good as new (ex-display), Universal testing machine PM5 Force: 5 kN crosshead stroke: 520 mm working chamber depth: 66 mm Pgedped R Dqbsfx Ah Aou total height: 1036 mm Weight: approx.48 Kg travel resolution: 0,01 mm test speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 5 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, so that a "quick test" can also be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This enables you to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & Commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping fixtures: Pressure plates, bending fixtures, shear fixtures, wedge grips, shear grips, peeling grips, screw grips, pneumatic grips and hydraulic grips.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: hard top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing Pgsdpsww Ax Defx Ah Asu -Dimensions total: 95/65/H70 mm -Total weight: 2.1 kg

Year of construction: 2025, condition: new, Universal testing machine PM50 Force: 50 kN cross beam stroke: 1200 mm Installation space: 400 mm Overall height: 1817 mm Weight: ca.380 Kg Travel resolution: 0.01 mm Testing speed: 0.03-1000 mm / min Return speed: 1000 mm / min Force transducer: 50 kN Psdjd R Dp Eepfx Ah Ajgu incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: 6 sets of top jaws for key bar chucks, helical toothed -Jaw width: 26 mm -Dimensions: see photo technical drawing -Shipping/Price: complete -Dimensions total: 285/240/H85 mm Pgsdpfxoww Axdj Ah Aeu -Total weight: 24.4 kg

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: for machine tools and systems 4 pieces -min. height: 50 mm -max. height: 60 mm -Shipping/Price: complete Pgedpfx Aewvfkteh Aou -Dimensions: 210/200/H55 mm -Weight: 9.7 kg/piece

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring elements: Machine feet 4 pieces for machine tools and systems -Support surface: 300 x 250 mm -Height: 35 mm -Price: complete -Dimensions each: 300/250/H35 mm -Weight 13.3 kg/piece Pgjdswvficopfx Ah Asu