Used Weiler Primus 2 Cnc for sale (201)

Condition: excellent (used), Year of construction: 1979, Manufacturer Weiler type Commador II L+Z Lathe year of construction: 1979 L x W x H: approx. 2500 x 1200 x 1800 mm weight: approx. 1500 kg Technical data: Max. Turning diameter over bed: approx. Ø 380 mm Max. Turning diameter over support: approx. Ø 190 mm Max. turning length: approx. 1000 mm Bar passage: approx. Ø 56 mm Spindle: Itsdpfjlp Ircjx Ag Njn Speed range: approx. 25 - 2000 rpm spindle nose: A 2 - 6 Drive power: approx. 4,0 kW Automatic longitudinal & face feeds: Feed range: approx. 0.026 - 1.253 mm/rev. Suitable for threads: - metric 0.35 - 12 mm - inch 44 - 2 Gg/" - diametrical - pitch thread 88 - 5 Dp - Module 0,2 - 4 Tailstock: MK 4 Without tool holder

Condition: good (used), Year of construction: 1972, turning diameter over bed 330 mm Itodpfswwl Izsx Ag Nen turning diameter over slide rest 200 mm turning length 800 mm total power requirement 3 kW weight of the machine ca. 800 kg dimensions of the machine ca. 1,9x0,7x1,2 m turning speed range 24-2800 U/min

Condition: used, Year of construction: 2005, Very good condition! max. turning length: 750 mm Swing diameter over bed: 300 mm Spindle speed: 1- 4,500 rpm spindle hole: 40,5 mm Spindle diameter front bearing: 70 mm Iedexca Ukepfx Ag Nstn Sauter tool turret: 8x tailstock quill: 50 mm diameter Quill: MK3 machine weight: 1.600 kg

Condition: good (used), functionality: fully functional, spindle bore: 36 mm, center height: 155 mm, turning length: 800 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, Used Weiler Condor lathe, No. 7939, Itjdpfx Aov R Tdxjg Nen Center height 155mm, Center width 800mm, Spindle speeds 12-2800 rpm, spindle bore 36mm Accessories: 1x RÖHM three-jaw chuck Ø 160mm, Multifix base body size B with 2 inserts, keyless drill chuck, live center, and coolant system. The machine is in stock at our facility in 71334 Waiblingen-Beinstein and is available immediately.

Condition: used, functionality: fully functional, This Weiler Commodor lathe comes from a technical school and, as such, has low operating hours. Lightly used and not heavily loaded – a tidy, reliable machine with a long service life ahead. Turning length: 1,000 mm Turning diameter over bed: 380 mm Turning diameter over cross slide: 190 mm Spindle speed range: 25 – 2,000 rpm Itjdpfx Agow U Sx Ho Njn Number of speed steps: 18 Spindle bore: Ø 56.0 mm Spindle taper: MK DIN 228 / MK 4 Spindle flange: DIN 55027 / size 6 Cross slide travel: 150 mm Bed width: 310 mm Feed rate – longitudinal: 0.022 – 0.8 mm/rev Feed rate – cross: 0.011 – 0.4 mm/rev Voltage: 380 V Total required power: 7.5 kW

Condition: good (used), Year of construction: 1991, Machine type Lathe - cycle-controlled Manufacturer WEILER Type E30 year of construction 1991 Control Weiler Country of origin Germany Additional information Cycle-controlled lathe WEILER - E30 Technical details Turning diameter max. 330 mm Turning length 750 mm Weiler control Center height 165 mm Swing diameter over bed 330 mm Itjdpfsr Dvqzex Ag Njn Max. turning diameter over facing slide 160 mm Face slide travel 180 mm Longitudinal bed slide travel 395 mm Main spindle: Speed range - main spindle 1 - 4,500 min/-1 Drive power - main spindle 9 / 11 kW Max. Torque 165 Nm Spindle head DIN 55027 / 5 Spindle diameter in front bearing 70 mm Spindle bore 40 mm Usable bar diameter ( - ) mm Tool holder: Type MultiFix Turning tool shank cross-section 20 x 20 mm Tailstock: Quill stroke 110 mm Quill diameter 50 mm Tailstock holder MK 3 Feed rates: Rapid traverse max. 10 m/min Feed force 6 / 3 kN Feed range 0 - 20 mm/-1 Thread cutting: metric 0.1 - 400 mm Inch 1/4 - 56 G/1" Module 0.125 - 28 mm.II DP 1 - 224 G/".II Number of threads max. 50 Total power requirement 10 kVA Machine weight approx. 1.5 t Space requirement approx. 2.8 x 2.0 x 2.0 m

Condition: used, Year of construction: 1984, - K+C 3-axis position indicator - Bison 3204-160 3-jaw lathe chuck - Collet chuck + various collets Ijdjv U Dlzspfx Ag Nstn - Chuck guard - Multifix - Coolant system - Chip deflector - Full service completed (oil change, belt change, etc.) - Year of manufacture 1984 Specifications - Swing over bed: 330 mm - Swing over cross slide: 185 mm - Turning length between centers: 750 mm - Turning length between centers with covered lead screw and feed screw: 650 mm - Center height: 165 mm - Bed width: 240 mm Lathe spindle: - Spindle head DIN 55027: Size 5 - or similar DIN 55029 (Camlock D1): Size 4 - Spindle diameter in front bearing: 70 mm - Spindle bore: 40 mm - Internal taper according to DIN 228: MT5 - Centering point according to DIN 806: MT3 - Maximum faceplate diameter: 280 mm - Standard chuck diameter: 160 mm - Maximum chuck diameter: 200 mm Tool slide: - Guide length of the bed slide: 365 mm - Cross slide travel: 175 mm - Cross slide spindle pitch: 3 mm - Cross slide width: 140 mm - Top slide travel: 140 mm - Top slide spindle pitch: 3 mm Tailstock: - Quill stroke: 110 mm - Quill diameter: 50 mm - Taper DIN 228: MT3 Spindle speeds: - Number: 16 / 32 - Range: 45-2800 / 22-2800 rpm Feeds: - Number: 120 - Standard longitudinal range over gears, metric/inch: 0.016 - 0.25 mm/rev - Standard longitudinal range over timing belts, metric/inch: 0.022 - 0.5 mm/rev - Steep longitudinal range over gears, metric/inch: 0.125 - 2 mm/rev - Steep longitudinal range over timing belts, metric/inch: 0.045 - 4 mm/rev - Face feeds: 0.3733 x longitudinal feed Thread pitches: - Standard metric: 0.18 - 28 mm - Standard inch: 80 - 1 1/2 thread - Module: 0.1 - 9 mm - Diametrical pitch: 200 - 2 3/4 thread - High-helix thread device: 8-axis - Lead screw pitch: 6 mm / 4 threads/in Workpiece weights: - Between centers without steady rests: 160 kg - Between centers with steady rests: 50 kg - Maximum workpiece weight (incl. clamping device): 125 kg Electrical specifications: - Motor power: 3 kW - Motor rated current: 7.1 A - Operating voltage: 400 V - Control voltage: 42 V Space requirements and weights: - Dimensions W x H x D: 1832 x 1290 x 880 mm - Turning spindle above floor: 1150 mm - Weight: approx. 1020 kg

Condition: used, Year of construction: 1989, turning diameter over bed 300 mm turning diameter over slide rest 150 mm turning length 800 mm spindle bore 36 mm turning speed range 42 - 2000 U/min Itjdpfx Agjrdwfze Nsn feeds 0,011 - 0,91 mm/U tailstock quill taper MT 3 total power requirement 2,2 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,7 x 0,8 x 2,0 m Machine had been active in the school centre very little used!

Condition: good (used), Year of construction: 1988, 1 used lead and feed screw lathe Make: Weiler Model: 160 B Year of manufacture: 1988 Technical specifications Centre distance: 650 mm Swing over bed: 320 mm Swing over cross slide: 192 mm Itedpfjw Sdr Hjx Ag Nsn Centre height: 160 mm Spindle bore: 40 mm Rated power: 2.4 / 3 kW Spindle speeds: 48 – 2500 rpm Dimensions: approx. L 2.20 x W 1.10 x H 1.40 m Weight: approx. 1 t Equipment Heidenhain digital readout Multifix toolholder with various inserts 3-jaw chuck Emergency stop

Condition: ready for operation (used), Year of construction: 2002, functionality: limited functionality, machine/vehicle number: 081, turning diameter over cross slide: 160 mm, spindle bore: 42 mm, turning length: 750 mm, turning diameter: 330 mm, swing diameter over cross slide: 160 mm, quill stroke: 130 mm, quill diameter: 50 mm, spindle speed (max.): 4,500 rpm, bed width: 240 mm, total length: 1,750 mm, total width: 1,150 mm, total height: 1,650 mm, overall weight: 1,300 kg, Used Weiler C 30 Servo Conventional Precision Lathe Iedsxfqyiopfx Ag Notn Year of manufacture 2002, center distance 750 mm, center height 165 mm, spindle bore 42 mm, dimensions L=approx. 1750 mm, W=approx. 1150 mm, H=approx. 1650 mm, weight approx. 1300 kg, equipped with ball quick-clamping device and various collets, two additional chucks, various tools. Display has minor fault, wear parts should be replaced. The machine can be inspected and functions tested. Wear parts should be replaced.

Condition: used, Year of construction: 2007, operating hours: 25,598 h, functionality: fully functional, Working area Centre distance mm 1000 Spindle head according to DIN 55027 AC drive Iedew U Szhopfx Ag Njtn Further technical specifications can be found in the attachment. Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and proper installation – all from a single source. Billing according to individual conditions and term. Contact us for your personalised offer.

Condition: good (used), Spare parts and accessories for WEILER lathes Iodpfjw U A Tnox Ag Nstn

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Weiler Praktikant VCD Precision Lead and Feed Screw Lathe with 3-axis Digital Readout, Infinitely Variable Speed, As-new Condition, Year of Manufacture 2019 Technical Data: >> Year of manufacture: 2019 Machine no. OD08 >> Centre height: 160 mm >> Swing over bed: 320 mm Isdpew Swkvjfx Ag Notn >> Swing over cross slide: 190 mm >> Distance between centres: 650 mm >> Spindle speeds: 30 to 4000 rpm (infinitely variable) >> Spindle bore: 43 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MK 3 >> Number of feeds: 24 >> Longitudinal feed: 0.02 to 0.63 mm/rev >> Cross feed: 0.006 to 0.2 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 1150 kg >> Spindle brake >> Dimensions (LxHxD): approx. 1.72 m x 1.7 m x 0.89 m Accessories and Equipment: >> Weiler digital readout >> New collet chuck system; new collets from 3 to 26 mm >> 160 mm 3-jaw chuck with 1 set of jaws >> Multifix size B with 3 tool holders >> 1 bed stop >> Splash guard >> Coolant system >> Machine lamp >> Operating manual, spare parts plan Safety Features: >> Lockable main switch >> Emergency stop button >> Electrically monitored chuck guard >> Automatic disengagement of the relevant handwheel when feed is engaged VCplus Digital Readout: >> 8-inch color screen >> 3 axes for bed, cross slide and compound slide >> 99 tool memory locations >> Oriented spindle stop >> Input for constant speed or cutting speed >> Feed rate and thread settings displayed >> Thread cutting with electronic stop About the machine: Offered here is a Weiler Praktikant VCD Precision Lead and Feed Screw Lathe with 3-axis digital readout. Year of manufacture 2019, in as-new condition with original paint. The machine is, of course, fully functional and equipped with new collets and chuck. You are welcome to inspect the machine under power on site and see its condition for yourself.

Condition: excellent (used), Year of construction: 2020, Fixed steady rest for WEILER E 50 lathe Itjdpotx Avkjfx Ag Non in very good condition. Clamping range : 10 -150 mm.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 56,538 h, functionality: fully functional, machine/vehicle number: EJ01, turning length: 4,500 mm, turning diameter: 800 mm, spindle bore: 106 mm, spindle speed (max.): 1,800 rpm, controller model: Siemens 810 D/D3, TECHNICAL DETAILS Turning diameter over bed: 510 mm Turning diameter over carriage: 800 mm Turning length: 4,500 mm Steady rest range: 16–510 mm Spindle bore: 106 mm Speed range: 1 – 1,800 rpm Tailstock quill taper: MK 6 Tool turret: Sauter 4-position, type 0.5.320.020 MACHINE DETAILS Control: Siemens 810 D/D3 Machine weight: 8,000 kg Operating hours: 56,538 h EQUIPMENT Myfran chip conveyor Chip discharge Prism mounting Coolant system Reinforced coolant pump Air conditioning unit for control cabinet 3-jaw chuck Ø400 mm Chuck guard extension Ijdpfxow Rctge Ag Njtn Rotating live center Machine halogen lamp Control panel Documentation

Condition: good (used), Year of construction: 1992, 1 used lead and feed screw lathe Manufacturer: Weiler Model: Condor B Year of manufacture: 1992 Technical specifications: Distance between centers: 750 mm Center height: 165 mm Spindle bore: 40 mm Spindle speed: 22 – 2800 rpm Tailstock: MK 3 Drive power: 1.6 / 3.2 kW Weight: 1040 kg Dimensions: 1,850 x 880 x 1,290 mm Itsdpsw Rcd Ssfx Ag Nsn Equipped with: 3-axis digital readout 3-jaw chuck Chuck guard

Condition: excellent (used), Year of construction: 2004, Control: with Weiler D2 cycle control Centre distance: 950 mm Centre height: 200 mm Swing diameter over bed: 410 mm Swing diameter over cross slide: 200 mm Bed width: 330 mm Cross slide travel: 230 mm Top slide travel: 120 mm Cross slide length: 630 mm Cross slide width: 195 mm Bed carriage guide length: 480 mm Tool cross-section (height/width): 25 x 25 mm Spindle Spindle nose according to DIN 55027: Size 6 Front bearing spindle diameter: 90 mm Spindle bore: 54 mm Main spindle taper: 6 MT Main drive Drive power 60% / 100% duty cycle: 9 / 7.5 kW Max. spindle torque: 700 Nm Total speed range: 1 – 3000 rpm Speed range gear stage I: 1 – 750 rpm Speed range gear stage II: 4 – 3000 rpm Feed drive Three-phase servo drives Feed range longitudinal and facing: 0 – 20 mm/rev Feed force longitudinal: 8000 N Feed force facing: 5000 N Rapid traverse speed longitudinal/facing: 10 / 5 m/min Tailstock Iodpfxjw Ufg Re Ag Netn Quill diameter: 65 mm Quill stroke: 120 mm Quill taper: 4 MT Thread cutting range Metric threads: 0.1 – 400 mm Inch threads: 1/4 - 56 TPI / 1" Module threads: 0.125 – 28 mm pitch DP threads: 1 – 224 TPI Machine dimensions Total length: 2300 mm Total width: 1400 mm Total height: 1700 mm Machine weight: 2100 kg Fixed steady rest (option) Clamping range: 12 – 150 mm Travelling steady rest (option) Clamping range: 10 – 160 mm

Condition: good (used), Perfect high throughput machine for kebab, burger or pet food factory. Itodpfxewlfxvj Ag Nsn

Condition: excellent (used), Year of construction: 2006, Centre height: 160 mm Centre distance: 650 mm Spindle speed: 2,500 min-1 Multifix Tailstock Itodpfx Agsw Sn Ire Nen Accessories

Condition: excellent (used), Year of construction: 1992, Weiler Condor 81 Weiler Condor 81 lathe with Heidenhain digital display, year of manufacture 1992, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Year of manufacture: 2003 Engine lathe WEILER type Condor 81 Distance between centers: 750 mm Swing over bed: 330 mm Center height over bed: 165 mm Swing over cross slide: 180 mm Center height over cross slide: 90 mm Spindle bore: 40 mm Chuck fitting: short taper DIN 55027 size 5 Itedpfx Aew T U Sgjg Njn Tailstock quill taper: MK 3 Quill travel: 110 mm Spindle speed: 45 – 2800 rpm, 16 steps Drive power: 3 kW Power supply: 400 Volt, 50 Hz Spindle speeds via 16-speed gearbox Required space (L x W x H): 1850 x 950 x 1400 mm Weight: 1,100 kg Accessories and equipment: Röhm 3-jaw chuck Multifix quick-change toolpost Coolant installation Heidenhain digital readout About the machine: We offer a Weiler Condor 81 lathe with Heidenhain digital display, year 1992, in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs very quietly. This newer generation of lathes is very user-friendly and can achieve ground-like finishes. Take the opportunity to inspect this machine under power at our location and see its condition for yourself. You can find more lathes from renowned manufacturers on our website.

Year of construction: 1980, condition: used, Weiler W2 hollow 280 mm centre height 440 mm bed width 320 mm weight of the machine ca. 200 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Itjdpofgv Dgofx Ag Nen Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Center Lathe Model Condor B Guide & Feed Shaft Lathe with 3-Axis Digital Readout by K&C NEW from Training Workshop!! Technical Data: >> Machine No. 91-1814, Year of manufacture: 1991 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev Isdpfsw Nw Dqjx Ag Netn >> Threads possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread leads: from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Scope of Delivery and Features: >> NEW 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating manual Functions: mm/inch switch, ABS/INC coordinate selection, display value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> 1 pc. NEW 160 mm 3-jaw chuck, 2 sets of jaws >> 1 pc. 160 mm 4-jaw chuck, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle safety guard >> Rear splash guard >> Fixed steady rest >> Machine feet Safety features: electronic spindle guard, 2 emergency stop switches, change gear cover with limit switch, spindle brake About the machine: We are offering a Weiler Condor in very good condition. The machine is, of course, fully operational. It is a very robust and powerful lathe. The brand new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.

Year of construction: 1990, condition: ready for operation (used), General Data Measurements width 1200 mm Measurements depth 1800 mm Measurements height 1700 mm Machine weight 1300 kg Main Drive Spindle bore 42 mm Workpiece Workpiece drm over bed 330 mm Additional Equipment Itjdow I H A Hjpfx Ag Non Multifix holder B mounted Fixed steady rest (option) clamping range: 15-100 mm Moving steady rest (option) clamping range: 10-85 mm Collets ranging from 3-28 mm (increments of 0.5 mm) Tailstock with an MK3 chuck This Weiler E30 was manufactured in 1990. A robust horizontal turning machine featuring a spindle bore of 42mm and a swing diameter over bed of 330mm. It supports a wide range of thread cutting, from metric to DP thread, and includes a Multifix holder B. Ideal for detailed and versatile turning operations. Contact us for more information about this machine. Application Types Turning

Condition: used, L + Z Lathe WEILER Type Condor 81 A Machine no. No. 36553 Year of construction approx. 1985 center distance 750 mm Itodpfsk S Ht Asx Ag Nsn Turning diameter over bed 330 mm Center height over bed 165 mm Turning diameter over support 180 mm Center height above support 90 mm Spindle bore 40 mm Chuck holder short taper DIN 55027 size 5 Tailstock inner taper MK 3 Pinol adjustment 110 mm Spindle speed 45 - 2800 rpm 16 steps Drive power 3 kW Mains connection 400 Volt, 50 Hz - Spindle speed via 16 gear steps - 3-jaw lathe chuck Ø 160 mm RÖHM with with drilling and turning jaws - Multifix size B quick-change steel holder with 3 inserts - Automatic longitudinal and planar feed - Electro-mechanical spindle brake - Emergency stop - Coolant tank with pump in the machine base, without supply line to the work area - Folding chuck guard - Splash guard - 1 piece rotating center point - Electrical diagram and operating instructions Space requirement L x W x H 1850 x 950 x 1400 mm weight 1100 kg good condition

Condition: used, Year of construction: 1992, machine/vehicle number: 160 3205, Sale only within EU member states! No private sale MAE can be inspected. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tooling, as well as for compliance with all safety and environmental protection safety and environmental protection requirements. Any warranty is excluded. Itodpfsuxl Ezjx Ag Nsn For the correctness of the technical data and year of construction, for the completeness of accessories and tools as well as for compliance with all safety- and environmental-requirements, mentioned in the accident prevention regulations, we take over no guarantee.