Used Weiler Ud 24 for sale (198)

Condition: good (used), Year of construction: 2015, total width: 1,800 mm, total length: 3,700 mm, total height: 4,300 mm, overall weight: 14,000 kg, Maximum drilling capacity in steel: 75 mm Length:3700mm Width:1800mm Height:4300mm Weight:14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Bwjdpfjzi S Snox Aiwow

Condition: like new (used), functionality: fully functional, Weiler Primus Lead and Pull Spindle Bench Lathe – Like New Condition!!! Technical Data: >> Year of manufacture approx. 1990, machine no. 4472 >> Center height 120 mm >> Distance between centers 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle bore 23 mm >> Short taper spindle head DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: Metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 three-jaw chuck, 125 mm, like new, with 2 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increasing in 1 mm increments >> Mulifix size A with 3 steel holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Operating manual, electrical diagrams, and much more About the machine: A Weiler Primus Lead and Pull Spindle Bench Lathe with a workbench is offered in like-new condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This Primus model comes from the German Armed Forces, where it was used very little (almost new). This newer generation of Weiler lathes is very user-friendly and can produce surfaces that are as smooth as if they were ground. Take advantage of the opportunity to inspect this machine on-site and under power to convince yourself of its condition. Digital display available for an extra charge. Bjdpfx Asz A Tgqjiwjww

Condition: ready for operation (used), WEILER Matador VS 2, including a new three-axis digital display, from a school workshop. -Maximum distance between centers: 140 mm -Distance between centers: 500 mm -Spindle speeds: 15 - 3550 rpm -Automatic longitudinal and cross feeds -Threading capabilities: metric, inch, etc. -New three-axis digital display -Electric chuck guard -Work light -Multifix base with inserts -Coolant system -Three-jaw chuck / collet chuck -Tailstock MK 3 -Various tools -Documentation Dimensions: L x W x H: 1.5 x 0.6 x 1.5 meters / Weight: 680 kg Bwsdpfx Ajzr Rnysiwow Errors and omissions excepted.

Condition: used, total height: 1,700 mm, total length: 1,400 mm, total width: 2,400 mm, Year of manufacture: 1997 Colour: Green Empty weight: 3.000 kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - Serial number: 270 - Drive system: Teach-in - Centre height [mm]: 210 - Swing over bed [mm]: 420 - Distance between centres [mm]: 900 - Spindle bore [mm]: 55 - Min. spindle speed [rpm]: 4 - Max. spindle speed [rpm]: 3000 - Options: Digital readout - Type of digital readout: Weiler - Control: CNC - Transport dimensions: 1400mm x 2400mm x 1700mm (l x w x h) - Transport weight [kg]: 3000kg Financial information VAT: The price shown is exclusive of VAT Bjdpfswnh I Sex Aiweww VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Year of manufacture: 2008, Siemens 840 D control, Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Q-axis / programmable tailstock, Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Bodpfxezt Iace Aiwsww Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Fixed holders,

Condition: used, Year of construction: 2011, functionality: fully functional, WEILER C30 cycle lathe (2011) Manufacturer: WEILER Type: C30 cycle lathe Bsdpfjzy Sq Eex Aiwoww Year of manufacture: 2011 Condition: Used

Condition: ready for operation (used), functionality: fully functional, WEILER COMMODOR from Bundeswehr stock -Good condition -Good operational condition -Maximum turning height 180mm -Maximum turning length 1000mm Bjdpjzuhfzefx Aiwsww -Bar capacity 56 mm -Speed range 56 - 2000 RPM -Automatic longitudinal / facing feeds -Threading / Metric / Inch etc. -Tailstock MK 4 -Three-jaw chuck 250mm -Electric chuck guard -Multifix base and inserts -Coolant system -Chip guard -Machine documentation Dimensions: L x W x H 2.5 x 1.3 x 1.7 meters / Weight 1500KG Errors and omissions excepted

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Original paintwork. Machine No. 96-2374 with CE certification. Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet lock - Tailstock: Morse Taper 3 - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Bodpfx Aieyuyruswoww Accessories and equipment: - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears - Faceplate - Coolant system - Chip guard - Spindle cover with emergency stop - German instruction manual

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Weiler Praktikant 160 AC Precision center lathe, 3-axis digital display, Weiler with AC drive, stepless speed control, CE marking!!!!! Technical data: >> Year of construction 1995, Machine No. 3820 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: up to 3000 rpm, stepless >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch Bwedpfsy Ulqwox Aiwew >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 1000 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m, length 1.6 m Accessories and equipment: >> 3-axis digital display Weiler >> Quick-change toolholder system with toolholders from 2 to 28 mm, in 1 mm increments >> 3-jaw chuck 160 mm, new, with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic chip guard >> Machine feet >> Splash guard >> Bed stop For safety: Electronic chip guard for the main spindle, cover for the lead and feed screw, brake motor, 2 emergency stop switches, electrical safety switch for the gearbox About the machine: Offered is a Weiler Praktikant AC center lathe with lead screw and feed screw, year of construction 1995, in very good condition. A very nice lathe with AC drive and stepless speed control of the main spindle. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Weiler has a CE marking. The machine comes from a training workshop. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a ground finish. The digital display makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site while it is powered on and convince yourself of its condition.

Condition: ready for operation (used), L & Z Lathe / WEILER CONDOR VS 2 with new 3-axis digital readout from training workshop - 3-axis digital readout "NEW" - Center height: 165 mm - Swing diameter over bed: 330 mm - Center distance: 800 mm - Speed range: 28 - 2800 rpm - Automatic longitudinal / cross feeds - Spindle bore - Tailstock with center - Collets / quick-clamping device incl. 25 collets Bwodsy Ral Iopfx Aiwew - 3-jaw chuck Röhm 200 mm with reversible jaws - Multifix / new with insert - Work light - Emergency stop - Bed stop - Machine feet - Documentation Dimensions: LxWxH 2x0.8x1.6 meters / Weight 900 kg Subject to errors and input mistakes.

Condition: ready for operation (used), L & Z Lathe WEILER CONDOR VS incl. RSF Digital Display -Center height 165mm -Swinging diameter over bed 330mm -Distance between centers 800mm -Speed range 28 - 2800 RPM -Automatic longitudinal / cross feeds -Spindle bore approx. 38mm -Tailstock -RSF Digital Display -Multifix base with inserts -3-jaw chuck & quick-change jaws -Collets / quick-change chuck incl. collets Bwsdpfxezn Raho Aiwsw -Drill chuck / rotating center -Bed stop -Chip guard -Coolant system -Emergency stop / On/Off switch -Documentation Dimensions: L x W x H 2 x 0.8 x 1.6 meters / Weight 900 kg Errors and omissions excepted.

Condition: ready for operation (used), L & Z Lathe WEILER Condor -Guideways "Good" -Optional 3-axis digital display -Center height 165 mm -Swinging diameter over bed 330 mm -Distance between centers 800 mm -Speed range 28-2800 rpm -Automatic longitudinal / crossfeed -Spindle bore approx. 40 mm -Threading / Metric / Inch, etc. -Collets / Quick-change tool holder incl. 20 collets -Three-jaw chuck -Multifix with inserts -Chip guard Bwsdpfx Aeztfiusiwow -Drill chuck / Follower point -Coolant system -Emergency stop -Documentation Dimensions: L x W x H 2 x 0.8 x 1.6 meters / Weight 850 kg

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,650 kg, spindle mount: MK 6, L&Z Lathe Weiler Commodor B The machine has been cleaned and inspected by us. It runs smoothly; measured runout is < 0.01 mm. Upon request, a coolant system and tool guard with a microswitch can be retrofitted. For sale only to businesses as defined in § 14 BGB. Technical data: Year of manufacture: 1987 Turning length: 1000 mm Turning diameter over bed: 380 mm Turning diameter over cross slide: 190 mm Spindle speed: 25 - 2000 rpm Spindle bore: Ø 56.0 mm / MK6 Tailstock quill: MK 4 Quill stroke: 150 mm Bed width: 310 mm Spindle mounting: DIN 55027 Size 6 Feeds - longitudinal: 0.022 - 0.8 mm/rev Feeds - transverse: 0.011 - 0.4 mm/rev Threads: M 0.3 - 10.0 mm Operating voltage: 380 V Total power consumption: 4 kW Weight approx. 1650 kg Accessories: • 3-axis digital display • Multifix quick-change tool holder B • 3-jaw chuck Forkardt 200 • 4-jaw chuck Röhm Bwedpfsz A Ah Rsx Aiwsw • Operating manual • Chip tray with integrated coolant pump for connecting a coolant system • Various accessories (set of soft jaws, turning tools, etc.)

Condition: used, Year of construction: 1982, functionality: fully functional, Weiler Condor VS2 lathe, manufactured in 1982, with a three-jaw chuck, Multifix system, and collet chuck assembly including a set of collets. The machine is in good, operational condition and can be demonstrated under power by arrangement. Bwjdpfx Aiszq R Anjwow

Condition: excellent (used), functionality: fully functional, center height: 165 mm, bar diameter (max.): 40 mm, WEILER CONDOR VS 2 Bwedpjzvy T Tsfx Aiwew -Condition: “Good” -Maximum turning diameter: 165 mm -Swing over bed: 330 mm -Distance between centers: 800 mm -Spindle speed range: 28-2800 rpm -Automatic longitudinal / cross feeds -Spindle bore: 40 mm -Threading capabilities: Metric, inch, etc. -Collet chuck - quick-change tool holder incl. collets -3-jaw chuck -Faceplate -Multifix system with inserts -Emergency stop -Documentation

Condition: used, Year of construction: 2003, CNC lathe with cycle control Manufacturer: Weiler Type: E50 Year of manufacture: 2003 Control system: Weiler cycle control D2 Operating hours: 15,164 Distance between centers: 1,000 mm Center height: 280 mm Chuck, max. diameter: 315 mm Max. diameter over bed: 570 mm Max. diameter over compound slide: 340 mm Max. diameter over cross slide: 600 mm Length of cross slide: 140 mm Workpiece weight, max.: 1,600 kg Spindle bore: 83 mm Spindle head: Size 8 Quick-change tool holder: Parat 4-way turret Includes 1 new RÖHM jaw chuck! Dimensions: 2,850 x 2,280 x 1,750 mm Weight: 3,350 kg Bsdpezt S A Uofx Aiweww Available immediately 31126ä

Condition: used, Year of construction: 2009, power: 11 kW (14.96 HP), spindle mount: MK 6, rotational speed (max.): 2,800 rpm, rotational speed (min.): 9 rpm, total width: 1,456 mm, total length: 4,500 mm, total height: 4,600 mm, overall weight: 12,100 kg, Equipment: CE marking, We offer this used WEILER VO 100 radial drilling machine, year of construction 2009. Manufacturer: WEILER Holoubkov S.R.O. Model: VO 100 Bjdpfx Aez A S D Ioiwoww Serial number: 152 452 057 Weight: 12,100 kg Year of manufacture: 2009 Country of manufacture: Czech Republic If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), L & Z lathe WEILER MATATOR incl. Heidenhain digital display ND 780 -Center height approx. 150mm -Swinging diameter over carriage approx. 160mm -Swinging diameter over bed approx. 300mm -Distance between centers approx. 500mm -Three-axis digital display / Heidenhain -Collets / quick-change tool holder & various collets Bedpszpba Usfx Aiwsww -Chuck guard -Chip guard -Multifix base plate & inserts -Spindle bore 36mm -Speed range 30 - 3500 rpm -Automatic longitudinal / cross feeds -Tailstock MK 3 -Three-jaw chuck -Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 600 kg Errors and omissions excepted.

Condition: good (used), functionality: fully functional, + Multifix "A" baseplate + Three-jaw chuck + Collets + Coolant pump Center height approx. 150mm Bedpjz Hatljfx Aiweww Swinging diameter over support 160mm Swinging diameter over bed approx. 300mm Distance between centers approx. 500mm Spindle bore approx. 36mm Speed range 30 - 3500 RPM Automatic longitudinal/cross feeds Tailstock MK3 Dimensions (LxWxH): 150 x 70 x 150cm Weight: 600Kg

Condition: ready for operation (used), L & Z Lathe WEILER Condor -Condition of guideways: "Good" -Optional 3-axis digital display -Center height 165mm -Swing over bed 330mm -Distance between centers 800mm -Spindle speed range 28-2800 rpm Bedpfx Aszta Dmoiwsww -Automatic longitudinal / crossfeed -Spindle bore approx. 40mm -Threading capabilities / Metric / Inch, etc. -Collet chuck - quick-change system -Four-jaw chuck -Multifix base and insert -Chuck guard -Coolant system -Emergency stop -Documentation Dimensions: L x W x H 2.0 x 0.8 x 1.6 meters / Weight 850 kg

Condition: good (used), functionality: fully functional, Subject to differential taxation according to §25a of the German VAT Act. You will receive a regular invoice. Internal article number: 26057 Lathe Weiler Matador + Multifix "A" baseplate + 3-jaw chuck + Collets + Coolant pump Center height approx. 150mm Turning diameter over carriage 160mm Turning diameter over bed approx. 300mm Distance between centers approx. 500mm Spindle bore approx. 36mm Speed range 30 - 3500 rpm Automatic longitudinal/cross feeds Bwedpfx Aozx R R Ioiwsw Tailstock MK3 Dimensions (L x W x H): 150 x 70 x 150cm Weight: 600kg The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated storage area of over 500 m².

Condition: good (used), CNC turning machine WEILER DZ42 CNC. Year of manufacture 2001, serial number 173, CNC Siemens 840C, machine weight approximately 3,800 kg, with bar feeder HATEC AM9. Bsdpfx Aez R R Htjiwjww

Condition: ready for operation (used), functionality: fully functional, Weiler Commodor in good working condition. Specifications: Swing diameter over bed: 380 mm Swing diameter over cross slide: 190 mm Distance between centers: 1000 mm Bwsdpfx Ajx Ngpdjiwjw Spindle bore: 56 mm Speed: 25–2000 rpm Motor power: 4 kW Machine equipped with: 3-axis digital readout 3-jaw chuck with multiple jaws Coolant system Multifix quick-change tool post with 4 holders Collet system with collets Bed stop

Condition: excellent (used), functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, equipped with a 3-axis digital display from Heidenhain ND 780, from a training workshop!! Technical data: >> Machine No. 7702, year of manufacture approx. 1990 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet fitting >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Quick-change tool holder, internal and external collets (see picture) >> 1 three-jaw chuck, 3 sets of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Machine feet Bwsdsy T Hqcjpfx Aiwjw About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: like new (used), Weiler Voest DA210, an original fixed and adjustable sun visor, in very good condition. Bodjz N Smwopfx Aiwoww