Used Window System for sale (44,383)

Condition: used, This listing is for a Dionex HPLC System Hodpfoxzhm Ssx Andsnu Combination includes Dionex AS3500 Dionex GP50 Gradient Pump Dionex ED50 Electrochemical Detector Dionex AD250 Absorbance Detector Dionex LC25 Cromatograph Oven Bottle trays This system has been removed from the lab while in good working condition, it was well serviced and is still in very good condition.

Condition: used, This listing is for a Shimadzu SIL-HT HPLC System Shimadzu SIL-HT Auto Sampler Shimadzu LC-10AD VP Shimadzu LC-10AD VP DGU-14A Degasser SPD-10AVP UV-VIS Detector This unit was previosuly being used with the CTO-20AC Column oven and the Applied Biosystems API 2000 It has been removed from the lab while in good working condition, it was well serviced and is still in very good condition. Hsdjxzhn Ajpfx Andsnu Equipment can be serviced/renovated/refurbished on request at extra cost. THIS IS ITEM DOES NOT COME WITH THE SHIMADZU CTO-20AC COLUMN OVEN

Condition: used, This listing is for a Enviro Systems UVIC-750 Hnedpfoxzhu Asx Andju

Condition: new, connected load frequency 230 V battery 24V / 100Ah Brush diameter 510 mm turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm KREMER floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Hnodpfx Aovu Hccjndou Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L

Condition: excellent (used), Year of construction: 2017, Böllhoff Uniquick Vario screw feeding machine UNIQUICK Feeder Type 360 Plastic sorting container, ∅ 360 mm Quiet and surface-friendly conveying Optimal helix dimensioning depending on the conveyed material (width and height) Integrated and controlled baffle High wear resistance Consistent conveying performance through amplitude control In a sound-insulated housing on a frame Belt width: 20 mm Head diameter of the fastener up to 20 mm Length of the fastener up to 55 mm Filling volume: 3 l SIM BB-10-C (ws) belt bunker Bunker container, chute: stainless steel Belt: white, FDA-approved Filling volume: 10 liters Max. filling weight: 35 kg Drive: AC gear motor 230V / 50Hz Bunker with innovative drive to ensure a metered, quiet and component-friendly feed of screws and fasteners. UNIQUICK Multi Modular expandable 3-way diverter Distributes the inspected screws to three stationary screwing machines Singulation Adapted outlet chute Precise guidance at the head Modular design Few format-dependent parts Reproducibility of the component Sensor monitoring Hnjdpfx Anjwbr N Hodju Maintenance-free Noise reduction Screw conveying in a plastic container Lining with noise-reducing material Airtight injection of screws Compressed air maintenance unit Compressed air connection: 6 bar Power supply: 230 V AC Year of manufacture: 2017 Dimensions: HxWxD 1050 x 650 x 650 mm Technical data You can find more new and used items in our shop! International shipping costs on request!

Condition: excellent (used), Digital display Brand Heidenhain Type ND 281 B Stock number (28594) Hodpfx Anjvx Nimsdenu Measuring display 1 axis used, has been tested for functionality

Condition: new, impact length 5000 mm Weight of Material maxium 300 Kg/m Wheel width 350 mm Hsdpfxovkiv Do Andonu roll diameter 60 mm work height adjustable 840 - 950 mm weight 172 kg length in width 620 mm length in total 5400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length.

Condition: good (used), FOBA DP 15 Laser Marking System The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focus of f=254 mm (254 mm focal length). This combination enables the permanent and sharp marking of materials such as metals and plastics using the "all-purpose laser." The 1064 nm wavelength is well absorbed by many materials, which can be used for annealing marking, color change, or material removal. Application: The fiber laser is a versatile "all-purpose laser" for marking industrial products. It is ideally suited for metals and a wide range of plastics. The technology enables permanent, easily readable, and precise marking. Mode of operation: The laser beam creates a focused light spot that penetrates the material. Depending on the material and settings, various effects can be achieved, including: Annealing marking: A color change of the material through heating. Color change: Creation of a color contrast on the material. Material removal: Removal of material to create a recess. Hjdjw U T Ebopfx Andjnu Details: Device: FOBA DP 15 Laser Marking System Laser type: Fiber laser Wavelength: 1064 nm Focal length (f): 254 mm (equivalent to 10 inches) More new and used items can be found in our shop! International shipping costs available upon request!

Condition: good (used), ApenGroup LRP28DE Gas-fired hot air generator Gas type: G20 natural gas Connection pressure: 20 mbar Rated heat input QN: 27 kW Rated heat output: 24.63 kW Connection voltage: 230V 1N, 50Hz Hsdpfx Anox Ihlkjdsnu Airflow rate: 2700 m3/h Protection class: IP20 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 1998, Stapling and folding station Horizon SPF10II with trimmer FC10ll delivery belt Hnsdpfxjwpimro Andsu

Condition: excellent (used), Chromatography System – Teledyne Isco CombiFlash Companion/TS Flash The CombiFlash Companion, a personal flash chromatography system, can be controlled and monitored from anywhere with any internet connection and Microsoft Windows® Explorer. It even notifies you via email as soon as the separation is complete. The system's advanced automation and communication features provide maximum productivity and peace of mind. This allows you to focus on other tasks while the purification process is running. The touchscreen controller allows you to operate the system locally on a clear display. The optional solvent management module controls up to four solvents online and monitors their levels, ensuring you never run out of solvent. The Companion uses precision-packed RediSep® Rf columns to obtain more pure material in less time than with glass columns or other disposable columns. Columns ranging from 4 g to 330 g can be quickly exchanged without additional hardware – for simple and fast scaling from milligrams to tens of grams of purified sample. The CombiFlash Companion automatically detects the column size and programs itself with the optimal conditions for that column. To start the run, simply press "Play". Because the software is specifically designed for purification and not for analysis, you can change method parameters in real time. To adjust the gradient during a run, simply click on a point in the gradient profile and drag it to the desired value to immediately modify the solvent mixture. Hnedpfxeyk Enae Andeu Power supply: 100/117 V AC, 50/60 Hz; 234 V AC, 50/60 Hz Dimensions (W x H x D): 540 x 490 x 490 mm Weight: 27.2 kg You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: new, Hygienio B1.N1 Steam Disinfection System The B1.N1 is ideally suited for ambulances, medical practices, dental clinics, and smaller spaces. Its compact size and unique features make it the perfect choice. If you are looking for a reliable and efficient disinfection solution without complicated operation, the Hygienio B1.N1 is just the thing for you. The ultimate, simplified disinfection system – developed for easy operation and handling. The B1.N1 model dispenses with the electronic control unit and is therefore particularly easy and effortless to use. Thanks to the manual and direct system status check, you have full control over the selection of the correct application mode – whether disinfectant or steam. The fluid tanks are equipped with optical level indicators, so you can monitor the level at any time and prevent possible damage to the internal components. Mobility: 4 abrasion-resistant rubber wheels Consumption: 2 liters of disinfectant solution per hour Hsdeykt Inspfx Andonu Tank capacity: Water tank: 2 l / Disinfectant tank: 2 l Working pressure: 2.5 - 4 bar Dimensions: 93.5 x 48.5 x 35.5 cm Lance length: 240 cm Weight: 23 kg Length of power cable: 4 m Manufacturer's price: €3,500 You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Inverter Hsdpfx Anjrc Diwedjnu FUJI FVR- G 5 Type FVR 037 G5-2 used from machine dismantling stock number 28452

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: DC, warranty duration: 24 months, compressed air connection: 2 bar, overall weight: 20 kg, filling weight (max.): 1,000 g, filling weight (min.): 100 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New Pneumatic Filling Machine / Filler – Plug & Play For sale: new filling machine suitable for dispensing liquids, pastes, and semi-viscous products, such as: - Disinfectants - Shampoos & lotions - Creams - Honey & jam - Milk & yoghurt - Water & alcohol - Sauces (e.g., pesto) - Etc. Simple, reliable, and immediately deployable This filling machine operates on compressed air and 220V and is fully plug & play. As a result, the machine is very user-friendly and particularly suitable for filling small to medium-sized batches. A small compressor is sufficient to run the machine; one can be supplied if desired. Flexible filling (100 – 1000 ml) The machine is equipped with a 1000 ml cylinder, allowing for a maximum of 1000 ml to be filled per cycle. - Minimum fill quantity: 100 ml - Any quantity between 100 and 1000 ml can be dispensed in a single stroke - Larger volumes can easily be achieved by multiple cycles Large hopper & expansion options Standard supplied with a 30-liter stainless steel hopper. There is also the option to connect to an IBC container or 200-liter drum, enabling quick and efficient handling of larger filling volumes. Manual or automatic operation The machine offers: - Foot pedal – fill at your own pace - Automatic mode – continuous filling cycle for higher volumes Depending on the product, fill volume, and operator, approximately 15 to 25 units per minute can be filled. Compact & high-quality construction Hoderivwfopfx Andsnu - Weight: approx. 15–20 kg - Easy to place on a table - Fully made of high-grade stainless steel - Robust, industrial build quality More information For questions, feel free to email us; we are happy to assist you with this or other machines. Additionally, we also offer a labeling machine, which is an excellent combination with this filling machine for a complete filling solution. We aim to respond within 24 hours and are available on weekdays from 09:00 to 17:30.

Condition: excellent (used), Desoutter CVI II Controller with Angle Screwdriver Manufacturer: Georges Renault (Desoutter) Controller: CVI II Angle Screwdriver: 01C11200 CVI II Controller From simple start-up processes to complex sequence applications – with up to 20 phases and 250 cycles – for optimal speed, accuracy, and operator comfort in every application. The controller features various interfaces, including an Ethernet port, an RS232 port, and 7 logic inputs as well as 8 logic outputs (24 volts). The CVI II controller can be used to control a handheld electric tool from the ER series or a stationary, built-in screw spindle from the EM series. It is important to note that the CVI II can also be used in combination with a measurement sensor-controlled angle screwdriver, such as the Desoutter ERA40J, which has a torque range of 8 to 40 Nm and a 3/8" drive. Memory Capacity Between 2,500 and 8,500 screw fastening results per station, depending on the number of cycles and the operating mode (asynchronous or synchronous). Hjdpswxv Hkjfx Andjnu Tightening Strategies – Torque and angle monitoring – Angle and torque monitoring – Torque and angle monitoring – Torque and angle rate – Predominant torque – Yield point – Stall torque – Torque and angle – Detection of the plastic zone of the joint – Additional torque and angle sensors – Self-tapping – Current monitoring Connectable Tools: Angle screwdriver / Straight screwdriver / Pistol screwdriver / Stationary screw spindles Dimensions (L x W x H): 400 x 400 x 330 mm Weight: 30 kg You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), Complete line to produce pancakes, crepes and blinis. Carousel hot plate system. In excellent condition. Hnjdpfxex Hailo Andju

Condition: used, Tenoning spindle 2 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum IV 68 Entrance Doors Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 10 NC Window System ----- Cross-cut Saw ----- with laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom rounding unit ----- Axial adjustment travel: mechanically coupled with cut-off saw 1st Tenoning and Slotting Spindle ----- Motor power (with brake): 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position (below table): 5–10 mm Radial adjustment travel: fixed 2nd Tenoning and Slotting Spindle ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 320 mm Axial adjustment travel: NC axis Radial adjustment travel: NC axis Home position (below table): 5–10 mm 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm 2nd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Horizontal Profiling Unit (Top) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool cutting circle: 130 mm Pneumatic adjustment: 8 positions (axial and radial) 3rd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Vertical Profiling Unit (Right, at Machine End) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Hsdpfx Aozawizondsnu Clamping length: 160 ...

Year of construction: 2019, condition: good (used), Venjakob RNV 2.0 Exhaust Gas Cleaning System This system incinerates gaseous pollutants and odors from the production exhaust air, releasing clean air into the environment. Extraction: Solvent-containing or odor-laden process air (e.g., from painting systems, the chemical industry, or printing plants) is fed into the system. Preheating: The contaminated air flows through internal ceramic heat storage units and is heated to a very high temperature. Combustion (Oxidation): In the combustion chamber, the natural gas inlet (the pilot burner) ignites the air. At a temperature of up to 850 °C, the organic pollutants (VOCs) completely break down into harmless water vapor (H₂O) and carbon dioxide (CO₂). Energy Recovery: The cleaned, hot air then flows through a second ceramic bed and releases its heat there. The system "stores" the heat for the next batch of contaminated air. This makes the system extremely energy-efficient, as after the start-up phase, hardly any additional gas needs to be supplied. System Data Manufacturer: Venjakob Umwelttechnik Type: RNV 2.0 Year of Construction: 2019 Manufacturing Number: 15212 Throughput Volume: 2,000 Nm³/h Gas & Combustion Gas Type / Heating Value: Natural Gas H / 10.4 kWh/Nm³ Firing Heat Output Range: 30 kW Hnedpfjzrl Ibex Andju Flow Pressure: 200 - 1,500 daPa Max. Combustion Chamber Temperature: 850 °C Electrical Connections Grid Connection: 400 / 230 V AC Connected Load: 24 kVA Current Consumption: 35 A "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More articles – new and used – can be found in our shop! International shipping costs upon request!

Condition: good (used), Solar Fence | Mobile Solar Frame, Used Total length: approx. 3,530 mm Total height: approx. 1,700 mm Modular system: The frame can be individually configured and adapted to the size of your solar modules and can be extended at any time with additional elements. Consisting of EACH: 04 x A - Shelf upright, used Shelf system: Dexion Type: Speedlock P90 Material color: sendzimir galvanized Frame profile: 100|25 Profile dimensions: 100x100x2.5 mm Adjustment grid: 50|50 mm incl. cross and diagonal braces, Foot plates (182x147x6 mm) The uprights are pre-assembled (bolted framework) 1,510 mm high 610|200 mm deep 08 x Solid rubber heavy-duty roller, used Design: Double-stop swivel roller Roller Ø: approx. 160 mm Roller width: approx. 40 mm Roller material: Solid rubber Plate dimensions: approx. 135 x 110 mm (W x D) Hole Ø: approx. 11 mm 08 x Pallet racking beams, used Shelf system: Dexion Type: Speedlock P90 Material color: sendzimir galvanized Box profile: 89 x 50 mm Beam type: SLO 089|2 Agraffe: 5 HK 1,140 mm clear width 16 x Locking pin Dexion, used Type: Speedlock P90 Material color: sendzimir galvanized 04 x Square tube, new Design: hot-dip galvanized Customs tariff number: 73066192 Steel grade: S 235 / S 275 Cross-section: 50x50x2 mm Weight: 3.25 kg | per meter Length: 950 mm Notch on both sides: 50 mm 08 x Spacer sleeves made of plastic M8, 20x30x8.5 mm, white, new 08 x Steel plate, new Dimensions: 42x50x1.20 mm Material color: sendzimir galvanized 01 x Screw material Upon request, you will receive a complete, coordinated photovoltaic system from our trading partner Erneuerbare Energien Ostfriesland with the following accessories: Growatt Neo Micro Inverter 800 Watt incl. Wifi, incl. 5 m AC Connection cable, new Hnsdpfx Asznxf Sendeu Growatt Battery Noah 2000 Watt incl. Wifi (Stackable up to 8 KW), new Solar Module DAS Solar Bifacial Full Black 450 Watt, new Photovoltaic Cable 2 x 3 m 6 sq mm Red/black incl. MC4 connector, new We will gladly arrange the contact for you. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional desired transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: excellent (used), Osai Neomark 400 Nd-YAG laser marking machine The NeoMark 400 Performance system was developed for printed circuit board marking. By completely eliminating mechanical movements of the laser, extremely high-resolution markings are possible. The internal conveyor belt is designed to perform width registration for various board types up to a board length of 320 mm. The user interface consists of a console with a separate keyboard to control the laser source, the control systems, the marking systems, and the automation responsible for the board movement via a PC. The NeoCut management software, developed based on NC², the control software of the NEO family, is a simple and intuitive interface for programming the machine and subsequent production monitoring. The Neomark is also equipped with an extraction system that can be connected to an external extractor or a central extraction system to capture the fumes and dust generated during the process. Main features: Manufacturer: Osai Type: Marking laser GIOTTO Laser Hnedpoxbck Eefx Andju Type: Neomark Y400 Power: 500 W Voltage: 230 V Rated frequency: 50 Hz ± 2% Maximum electrical absorption: 4 kW Minimum flow rate for pneumatic system: 20 Nl/min Working area: up to 320 x 320 mm Laser safety class: Class 1 (EN 60825-1) Access to the working area: Front door with laser filter Loading and unloading of the printed circuit board PC with LCD monitor and keyboard Dimensions: 1200 x 1310 x 1800 mm Weight: approx. 1300 kg Laser completely rebuilt Motor of the beam expander renewed All hoses for cooling replaced More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2008, 12 motors of 15kW Disassembled into 6 parts: Part 1: 2x Upper part with motors 4000kg Part 2: 2x Intermediate part with filter bags 4000kg Part 3: 2x Lower part with legs 2000kg Remainder: Return lines and 1x switch cabinet. Dismantling takes place on Extraction is loaded onto the truck. - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 8011510B - Suitable for material: Wood dust - Type of extraction: Underpressure installation - Capacity [m³/h]: 80000 - Nominal airflow [m/s]: 22 - Negative pressure [Pa]: 3200 - Main fan [pcs]: 12 - Main fan power [kW]: 15.0 - Number of filter bags [pcs]: 384 - Filter length [mm]: 2500 - Filter diameter [mm]: 230 - Filter surface area [m²]: 694 - Options: Fire suppression system, Control cabinet Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hsdpfx Aewiwpzsndjnu Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, working width 1000 mm battery 24 V Hnodszlukfopfx Andsu weight of the machine ca. 0,75 t dimensions of the machine ca. 1,7 x 1,0 x 1,4 m Ride-on sweeper - incl. charger

Condition: new, Year of construction: 2015, Complete Knapp Fastline System RA2519 _____ Premium Conveyor Technology Available Immediately A high-quality, modular conveyor system from the Austrian intralogistics specialist KNAPP AG is for sale. The system was manufactured in 2015 as part of an automated material flow system but was never put into operation. It remains disassembled and in storage today. With a conveyor length of approximately 300 meters, numerous buffering sections, RollerDrive curves, and comprehensive original documentation, this system offers a cost-effective alternative to a new, expensive purchase. _____ The system at a glance Feature Description Manufacturer KNAPP AG System Fastline Year built 2015 Conveyor Length approx. 300 m Roller Width Hnodpfx Ajzwylrondsu 450 mm Accumulation space 720 mm Conveyor speed 0,75 m/s RollerDrive curves 11 units Interroll DriveControls 277 units available _____ High-quality industrial design The KNAPP Fastline series is one of the proven modular conveyor systems for automated material flows. The system was developed for the continuous transport of cartons and containers and is suitable for use in: • Distribution centers • Shipping logistics • Production logistics • E-commerce • Replacement or expansion of existing conveyor systems Thanks to its modular design, individual conveyor sections can be used just as easily as complete system components. _____ Scope of Delivery The scope of delivery includes, among other things: Conveyor Technology • Approx. 300 meters of roller conveyor systems • Accumulation roller conveyors • Drive roller conveyors • Conveyor modules of various lengths • Conveyor curves Curves • 11 RollerDrive curves Drive Technology • 277 Interroll DriveControls EC310 Steel Structures • Extensive support columns • Column bases • Connecting elements Pneumatics • Pneumatically controlled accumulation stations • Pneumatic assemblies • Sensors Documentation • Original KNAPP parts lists • Transport and package lists • Documentation of the main assemblies _____ Technical Concept The system is based on the modular KNAPP Fastline system. The material being conveyed is transported on roller conveyors. The storage bins are pneumatically controlled. Thanks to the modular design, conveyor routes can be easily extended or adapted to new warehouse layouts. A key advantage is the use of commercially available industrial components, ensuring that replacement parts will remain available in the future. _____ Premium Manufacturer KNAPP is one of the world\'s leading manufacturers of automated material flow systems. The system is not a custom-built or specially designed solution, but rather based on an industrial mass-production platform. _____

Condition: excellent (used), mileage: 241,839 km, power: 206 kW (280.08 HP), first registration: 07/2008, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,100 mm, fuel: diesel, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro4, number of seats: 3, total length: 8,250 mm, Year of construction: 2008, Equipment: ABS, central locking, electric window regulation, power mirror, = Additional options and accessories = - 3 chairs - Beacon(s) - Radio/CD player - Rear view camera - Sun visor - Work lamp(s) = Remarks = Superstructure Year of manufacture: 2008 Volume: 16 m3 Material: Aluminium = More information = General information Number of doors: 2 Cab: single Registration number: 1XQL900 Technical information Hnedpfx Ajzwqc Isndsu Engine capacity: 7.146 cc Front axle: Steering Rear axle: Double wheels Weights Empty weight: 12.260 kg Carrying capacity: 6.740 kg GVW: 19.000 kg Functional Make of bodywork: GEESINK Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), mileage: 1,047,558 km, power: 375 kW (509.86 HP), first registration: 03/2017, fuel type: diesel, tire size: 385 / 65 / R22.5, axle configuration: 8x2, wheelbase: 6,270 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, suspension: steel-air, number of seats: 2, total length: 8,840 mm, total width: 2,550 mm, total height: 3,800 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, parking air conditioner, power mirror, soot filter, trailer coupling, General information Cab: Globetrotter Technical information Number of cylinders: 6 Engine capacity: 12.777 cc Transmission Transmission: Volvo I-Shift, 12 gears, Automatic Axle configuration Make axles: Volvo Brakes: disc brakes Front axle: Tyre size: 385 / 65 / R22.5; Max. axle load: 10000 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80%; Suspension: leaf suspension Rear axle 1: Tyre size: 385 / 65 / R22.5; Lift axle; Max. axle load: 9000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: air suspension Rear axle 2: Tyre size: 315 / 80 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80%; Reduction: single reduction; Suspension: air suspension Hnedpoz Iww Djfx Andju Rear axle 3: Tyre size: 315 / 80 / R22.5; Double wheels; Lift axle; Max. axle load: 9500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Suspension: air suspension Weights Empty weight: 13.945 kg Carrying capacity: 23.055 kg GVW: 37.000 kg Functional Crane: VDL S-25-6200, year of manufacture 2017, behind the cab Interior Interior: grey Environment Emission class: Euro 6c Condition Technical condition: good Visual appearance: average Number of keys: 2 (1 hand transmitter) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Alloy wheels - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Coupling - Heavy duty engine brake - Hydraulic - Low-noise - Particulate filter - Power take-off (PTO) - PTO - Radio, MP3 enabled - Radio/CD player - Refrigirator - Remote central locking - Side skirts - Speed limiter - Spotlights - Stability control - stand airco - Toolbox - Visor - Webasto