Used Wire Bending Machine for sale (65,169)

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC Cgsdex Sr Dfspfx An Neu - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: used, Swivel bending machine HM, type KSM-5 / 2500 Manufacturer's No. 2004 / 3262, Year of manufacture 2004 Useful length 2520 mm Maximum sheet thickness 5 mm at 400 N/mm² Cgsdpjzbhuwefx An Nsu Stroke of the upper ram 200 mm Adjustability of the bending ram 60 mm Motor power, upper ram 2.2 kW Motor power, bending ram 4 kW Mains connection 400 volts, 50 Hz - One-piece top beam 135° (installed) - Segmented gooseneck tool with mounting rail - Round tool for rounding up to 180° - Various bending tools for the bending ram - Adjustable bending angle via handwheel with clamping mechanism - Electric foot switches - Operating manual with electrical diagram available - Without rear stop Space requirement L x W x H 3900 x 1150 x 1560 mm Weight (machine) 4700 kg Weight (tools) 250 kg In good condition

Condition: excellent (used), horizontal bending machine Manufacturer: Stierli-Bieger Type: 120 SB DGSL Bending capacity for flat steel: 130 x 12 Pipe diameter up to: G-pipe 1 1/2 Pressing force: 12 tons Stroke length: 170 mm 380 volts 1.5 kW Year of manufacture: 1992 Transport dimensions: Length: 1100 mm Width: 750 mm Height: 1150 mm Weight: 420 kg Cgodpjy Uc U Tofx An Nsu

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, machine/vehicle number: 935452, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, overall weight: 4,450 kg, Equipment: documentation/manual, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 Cgsdpfeywcivox An Nsu x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Condition: excellent (used), Year of construction: 2007, operating hours: 16,906 h, functionality: fully functional, Sodick AQ 300 L in good condition Operating hours: 16,906 Year of manufacture: 2007-11 Linear servo control X, Y, Z: 300 x 200 x 200 mm U, V: 80 mm Wire diameter: 0.15–0.3 mm (0.25 mm installed) Max. workpiece dimensions: 740 x 440 x 200 mm (X, Y, Z) Max. workpiece weight: 300 kg Chiller Deionization cartridge Complete documentation Machine is powered for inspection Cjdpfxsyh E S De An Negu

Condition: used, Year of construction: 2002, Charmilles Robofil 440-CC Wire-Cut Electro-Discharge Machine. Serial No. 931081 (2002). Country of Origin: Switzerland Please Note: this lot has been professionally decommissioned and secured for transit Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Csdpfxjy R Adys An Nogu

Condition: used, Year of construction: 2002, Charmilles Robofil 4030 SI-TW Wire-Cut Electro-Discharge Machine. Serial No. 174621 (2002).Country of Origin: Switzerland Codpfoy Rz Nzex An Nogu Please Note: this lot has been professionally decommissioned and secured for transit Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2010, Agie Charmilles FI 640 CC Wire-Cut Electro-Discharge Machine. Serial No. 113 (2010) Cgsdpoy Rz Iwjfx An Nou Please Note: this lot has been professionally decommissioned and secured for transit Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: good (used), Faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine, ring bender, ring former Cgjdpfx Aofg Th Asn Nsu -Diameter of faceplate: 1330 mm -Clamping disc diameter: 775 mm -For an additional charge: other round shapes can be produced -Geared motor power: 1.5 kW -Speed: 86 rpm -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg

Condition: used, Year of construction: 1986, tube diameter 4-20 mm wall strength 2 mm bending radius min. 10 mm bending radius max. 75 mm bending speed 35 mm/min pull up length of tube 2000 mm total power requirement 7,5 kW weight of the machine ca. 1,1 t Cjdpfx Aewbi Hcen Nogu dimensions ca. 3100x1000x1400 mm

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 550 mm, workpiece length (max.): 750 mm, GF CUT 2000X Year of manufacture: 2016 Travel distances: X= 350 mm, Y= 250 mm, Z= 256 mm U/V-axis travels: +/- 70 mm Cgedpfxjydk Ske An Neu Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.30 mm including Option KIT 50 Including automatic wire changer AWC Water bath machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER hand-held box for convenient setup Including AGIESETUP 3D Including glass scales for X and Y axes VISION 5 control unit 15" LCD color screen, membrane keyboard and mouse Including Threading Expert Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. An individual test cut is possible upon request. We also offer on-site commissioning and training for this machine.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress VP2 Year of manufacture: 2011 Travel ranges: X = 350 mm, Y = 250 mm, Z = 256 mm U/V axis travel ranges: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged), 450 kg (non-submerged) Achievable surface finish: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM with automatic wire threading and re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER handbox for easy setup AGIE IPG-V Generator with Power Module AGIEVISION CNC control Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Cgjdpjywkuyefx An Nsu Our machines are cleaned and thoroughly overhauled after receipt of order. A test cut with optimal surface finish is then carried out for acceptance. You will receive a 6-month warranty for the machine. We are happy to offer on-site commissioning and training.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2012 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.10 – 0.33 mm Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes automatic wire changer AWC (using 2 wire spools) VISION 5 control AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be completely cleaned, overhauled, and thoroughly tested. Subsequently, a laser measurement of the axes will be performed at our facility. Cedpfx Anszbbmts Nsgu We would be happy to carry out an individual test on the CUT 3000 for you. Includes operator training at Techma on your overhauled machine. Optionally, we offer you: - Transport - Commissioning - Cooling unit - Clamping devices - Consumables

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, AGIECUT Excellence 2F Year of manufacture: 2002 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface roughness: 0.1 µm Ra Max. cutting rate in cylindrical cutting: 300 mm²/min Available wire diameters: 0.07 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER hand box Includes AGIE-Setup 3D After receiving your order, the machine will be cleaned, inspected, and thoroughly tested by our technicians. We would also be happy to offer commissioning and training services. Cgodpfx Aozbbndjn Neu

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, workpiece weight (max.): 35 kg, travel distance X-axis: 220 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 100 mm, High-precision wire erosion machine GF CUT 1000 Year of manufacture: 2014 Travel ranges (X/Y/Z): 220 x 160 x 100 mm Travel ranges (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter from 0.07 mm to 0.20 mm Best achievable surface finish: Ra = 0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER handheld control unit for convenient machine setup 15" LCD color screen with jog shuttle and mouse AGIEVISION control system Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic switching between two wire diameters Cgsdpfx Anezbbpns Nsu Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2700 kg After receiving the order, the machine will be cleaned, completely overhauled, and thoroughly tested by our specialists. We would be happy to commission the machine at your location and provide training on the control system and machine operation.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Cgedouuz Iijpfx An Nju Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set

Year of construction: 2008, condition: refurbished (used), AGIECUT Challenge V3, Year of manufacture 2008 travels: X= 500 mm, Y= 350 mm, Z= 256 mm travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable set-up Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Cgjdpfjm Amf Dox An Neu Net weight: 4500 kg The machine is cleaned, overhauled and extensively tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transport, commissioning, training, cooler

Year of construction: 2007, condition: refurbished (used), GF AgieCharmilles Progress V3 Year of manufacture 2007 travels: X= 500 mm, Y= 350 mm, Z= 426 mm Travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER- hand box for comfortable set-up AGIE IPG-V generator AGIEVISION 5 control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and overhauled by us after receipt of order. Cjdpfx Anemmfwuj Njgu You will receive a warranty of 6 months on all machine parts. We are also happy to offer you commissioning and training

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, GF AgieCharmilles Classic V3 Year of manufacture 2008 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Codpfx Asv Hbygjn Njgu Achieveable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.15 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for comfortable Setting up AGIE IPG-V generator AGIEVISION 5 control Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine has already been cleaned, overhauled and tested by us. We would be happy to carry out an individual test cut for you. You receive a 6-month warranty on all machine parts. We would also be happy to offer you commissioning and training

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, GF AgieCharmilles Progress VP3 Year of manufacture: 2009 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (out of tank) Achievable surface quality: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Codpfxsxggdme An Negu Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control unit Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine is cleaned and fully overhauled after receipt of order. You will receive a 6-month warranty on all machine parts. We are also happy to offer commissioning and training services.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 525 mm, GF AgieCharmilles Progress VP4 Year of manufacture: 2012 Travel paths: X = 800 mm, Y = 550 mm, Z = 525 mm Travel paths: U = 800 mm, V = 550 mm Maximum taper: 30° at 500 mm height Maximum workpiece dimensions: 1300 x 1000 x 510 mm Maximum workpiece weight: 3000 kg Cgodpfjyir N Usx An Nju Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged-type wire EDM machine with automatic wire threading and re-threading after wire breakage Including automatic front door Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 2900 x 3050 x 2850 mm Net weight: 6000 kg The machine will be cleaned and fully overhauled after order confirmation. A 6-month warranty on all machine parts is included. Commissioning and training can also be offered on request.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Excellence 3 Year of manufacture: 2001 Travel paths: X= 500 mm, Y= 350 mm, Z= 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.10 µm Available wire diameters: 0.10 – 0.33 mm Cedeyx D I Aopfx An Nogu Submerged machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER handbox for convenient setup Including AGIESETUP 3D AGIEVISION control unit AGIE IPG generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and thoroughly tested by us upon receipt of order. Includes user training at Techma on your overhauled machine Optional: Transport, commissioning, chiller

Year of construction: 2006, condition: refurbished (used), AGIECUT Challenge 3 eCut Year of construction 2006 Travels: X= 500 mm, Y= 350 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D AGIEVISION control unit AGIE generator with eCut technologies for faster and more efficient processing Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and thoroughly tested by us after receipt of the order. We then put the machine into operation on your premises. Cedpfxsgfm Rrs An Njgu You receive a 6-month warranty on the machine. We are happy to offer you the following additional services: - Control and maintenance training - Cooling unit - Programming system - Consumables - Clamping devices - Transportation

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Codjv Dkvropfx An Negu Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress V2 Year of manufacture: 2007 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Cgedpfxex Uxgle An Nou U/V-axis travel range: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X and Y axes for enhanced precision Available wire diameters: 0.20 – 0.33 mm Submerged-type machine with automatic wire threading and automatic re-threading after wire break Manual front door (accessible from one side) Includes AGIEJOGGER hand-held pendant for convenient setup AGIE IPG generator with Power Module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and completely overhauled after receipt of order. Afterward, a test cut is performed with the finest surface finish for approval. You will receive a 6-month warranty on the machine. We are happy to offer on-site commissioning and training.