Used Wire Comb for sale (3,891)

Condition: good (used), Introma ZD-2 SR Wire Stitcher The machine is in very good condition and ready to use. This is the current production model. Technical specifications: Capacity: 180/min Sewing thickness: max. 25mm Wire diameter: max. 1mm Power supply: 230V Weight: 230kg The machine has an adjustable table for block and booklet stitching. Credpfxoy Hgixe Ac Nsb Side and front margins. Instructions included.

Condition: like new (used), Year of construction: 2024, operating hours: 2,200 h, functionality: fully functional, workpiece weight (max.): 850 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,245 mm, total length: 3,445 mm, total width: 2,595 mm, wire diameter (max.): 0.3 mm, type of input current: three-phase, overall weight: 3,684 kg, input frequency: 60 Hz, Equipment: cooling unit, We are offering this Sodick VN 600Q wire EDM machine, year of manufacture 2024. Manufacturer: Sodick Model: VN 600Q Year: 2024 Condition: like new The machine currently has 1,137 hours of cutting time and approx. 2,200 operating hours. Csdpfsyyy Disx Ac Norb • 10-year warranty on positioning accuracy • Linear motors (X, Y, U, V axes) • Absolute linear glass scales (X, Y, U, V axes) • Ceramic components • LN3W generator • Remote control • Enhanced operator-friendliness • Energy-saving circuit • Automatic water level control • Fixed Jet AWT with pop-up function • Heart NC software • Wire end remover • Dielectric cooling unit • Voltage stabilizer • LAN interface • USB port Further specifications for this machine: Travel (X/Y/Z axis, mm): 600 x 400 x 310 Travel (U/V axis, mm): 90 x 90 Max. workpiece weight (kg): 850 Table height from floor (mm): 1,000 Machine dimensions (W x D x H, mm): 2,595 x 3,445 x 2,245 Machine weight (kg): 3,684 Air pressure: 0.65 MPa, 30 NL/min Total power consumption: 11.5 kVA, 3 phase, 50/60 Hz Taper angle: ±15° (workpiece thickness: 120 mm) Wire diameter (mm): ø 0.1 ~ ø 0.3 mm Wire tension (N): 3 ~ 23 N Category ID: 1896 Type ID: 2593 Machine type: Wire EDM machine If you have any questions or require further information, feel free to send us a message or call us.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Excellence 3 Year of manufacture: 2001 Travel paths: X= 500 mm, Y= 350 mm, Z= 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.10 µm Available wire diameters: 0.10 – 0.33 mm Submerged machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER handbox for convenient setup Including AGIESETUP 3D AGIEVISION control unit Csdpfx Ajyx D I Aec Nsrb AGIE IPG generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and thoroughly tested by us upon receipt of order. Includes user training at Techma on your overhauled machine Optional: Transport, commissioning, chiller

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 92568/331430, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates the buyer to collect the item within the specified period, between 04/05/26 and 07/05/26. TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 250 mm Z-axis travel: 200 mm U-axis travel: 400 mm V-axis travel: 250 mm Taper angle/height: ±30°/200 mm Max. workpiece dimensions: 850 mm x 500 mm x 200 mm Max. workpiece weight: 500 kg Table dimensions: 720 mm x 500 mm Distance floor to table: 1,000 mm MACHINE DETAILS Codpfxoyr Nkns Ac Norb Control: CHARMILLES Operating voltage: 380 V Frequency: 50 Hz Rated current: 15 A Connected load: 10 kVA Dimensions & Weight Dimensions (L x W x H): 2,400 x 2,200 x 2,100 mm Door width: 900 mm Weight: 2,500 kg External reference: 59

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: J20M0956, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, controller model: MITSUBISHI ADVANCE, No reserve price – guaranteed sale to the highest bidder! Placing a bid constitutes a binding commitment to collect the machine on time between 04.05.26 and 07.05.26. TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 350 mm Travel Z-axis: 300 mm Travel U and V axes: ±75 mm Taper angle at workpiece width: 15° Maximum workpiece dimensions: 1,050 x 800 x 295 mm Maximum workpiece weight: 1,500 kg Table dimensions: 780 x 630 mm Permissible wire diameter: 0.07 – 0.3 mm Feed rate X- and Y-axes: 1,300 mm/min Crodpfx Acoyr Niqs Njb MACHINE DETAILS Control unit: MITSUBISHI ADVANCE Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,000 x 2,500 mm Weight: 4,000 kg EQUIPMENT Coolant system Transformer Documentation Note: The machine can be transported with a standard truck. External reference: 58

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 5.2661/330178, table width: 440 mm, table length: 730 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates prompt collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Table dimensions: 730 x 440 mm MACHINE DETAILS Control: CHARMILLES Operating voltage: 380 V Cjdpfjyr Ndzsx Ac Nsrb Frequency: 50 Hz Rated current: 15 A Connection load: 10 kVA Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,600 x 2,200 mm Weight: 2,500 kg External reference: 57

Condition: excellent (used), Year of construction: 2007, operating hours: 16,906 h, functionality: fully functional, Sodick AQ 300 L in good condition Operating hours: 16,906 Crjdpfx Acjyh E S Ds Nob Year of manufacture: 2007-11 Linear servo control X, Y, Z: 300 x 200 x 200 mm U, V: 80 mm Wire diameter: 0.15–0.3 mm (0.25 mm installed) Max. workpiece dimensions: 740 x 440 x 200 mm (X, Y, Z) Max. workpiece weight: 300 kg Chiller Deionization cartridge Complete documentation Machine is powered for inspection

Condition: excellent (used), Year of construction: 2013, loading capacity: max. 1.500 Kg. wire diameter range: 0,5 - 8,0 mm coil outside diam. max. 1.000 mm Csdpfx Acjvam Iij Njrb coil inside diam. min. 300 Kg. speed: 0 - 80 U/min

Condition: excellent (used), Year of construction: 2010, loading capacity: max. 1.500 Kg. wire diameter range: 0,5 - 8,0 mm coil outside diam. max. 1.000 mm speed: 0 - 80 U/min Cedevck Hujpfx Ac Nsrb

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Crodpswi Tidefx Ac Neb Info: straight through Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: D12E/8177, Offer Number: D12E/8177 Machinetype: wire nail press Make: WAFIOS Type: N61 Constr. year: 1986 wire diameter: 3,1-5,2 mm Crodpfx Aowi Tk Ijc Njb nail length: 13-150 mm capacity - pieces/min: 370 Location: Europe

Condition: used, Year of construction: 1968, functionality: fully functional, machine/vehicle number: D06L/7826, Offer Number: D06L/7826 Machinetype: wire and strip bending machine Make: BIHLER Type: GRM50 Constr. year: 1968/2016 wire diameter range: 0,5 -5,0 mm width of band: max 70 mm Csdpfx Aswi S Ewec Nerb feeding length: max 320 mm output pieces/min: max 132 number of slides: 5 Location: In our warehouse

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Constr. year: inlet wire diameter: 6,5 mm finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe Crjdjwi S Ixepfx Ac Neb

Condition: used, Year of construction: 1955, functionality: fully functional, machine/vehicle number: D12L/7525, Offer Number: D12L/7525 Machinetype: wire nail press Csdpfx Acjwi S Rgs Njrb Make: WAFIOS Type: S40 Constr. year: 1955 diameter range: 0,8-1,8 mm nail length: 10-40 mm output - pieces/min: 550 Location: In our warehouse

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: D12E/8151, Offer Number: D12E/8151 Machinetype: wire nail press Make: ENKOTEC Type: NA05 SH Constr. year: 2011 Crodjwi Tl Eepfx Ac Njb diameter range: 1,8-2,5 mm nail length: 32-57 mm output - pieces/min: 2000 Location: Europe

Condition: used, functionality: fully functional, machine/vehicle number: D12L/8373, Offer Number: D12L/8373 Machinetype: wire nail press Make: WAFIOS Type: S110 Constr. year: approx1970 diameter range: 2,2-3,8 mm nail length: 13-110 mm output - pieces/min: 350 Location: In our warehouse Crjdpfjwi Ubnox Ac Neb

Condition: used, Year of construction: 1982, functionality: fully functional, machine/vehicle number: D12L/8273, Offer Number: D12L/8273 Machinetype: wire nail press Make: WAFIOS Type: N5 Constr. year: 1982 wire diameter: 2,2-4,2 mm nail length: 13-105 mm capacity - pieces/min: 430 Cjdpfx Acswi Suro Njrb Location: In our warehouse

Condition: used, Year of construction: 1965, functionality: fully functional, machine/vehicle number: D12E/8243, Offer Number: D12E/8243 Machinetype: wire nail press Make: WAFIOS Type: S300 Constr. year: 1965 diameter range: 4-10 mm Cedpfowi Svpex Ac Norb nail length: 50-300 mm output - pieces/min: 150 loacation: Location: Europe

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D12L/8171, Offer Number: D12L/8171 Machinetype: wire nail press Info: with assembly device for head plates Csdowi Tk Uopfx Ac Nerb Make: WAFIOS Type: S110 Constr. year: 1970 wire diameter: 2,2-3,8 mm nail length: 13-110 mm capacity - pieces/min: 350 Location: In our warehouse

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: D12L/8263, Offer Number: D12L/8263 Machinetype: wire nail press Make: WAFIOS Crodpfjwi Tg Aox Ac Njb Type: N90 Constr. year: 1997 diameter range: 2,0-4,0 mm nail length: 50-100 mm output - pieces/min: 800 Location: In our warehouse

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: D12L/8212, Offer Number: D12L/8212 Machinetype: wire nail press Make: WAFIOS Cjdpfewi Tiksx Ac Njrb Type: N6 Constr. year: 1974 diameter range: 3,1 - 5,2 mm nail length: 13 - 150 mm output - pieces/min: 370 Location: In our warehouse

Condition: used, Year of construction: 1966, functionality: fully functional, machine/vehicle number: D12L/7651, Offer Number: D12L/7651 Crodowi S I Sopfx Ac Njb Machinetype: wire nail press Make: WAFIOS Type: S50 Constr. year: 1966 diameter range: 1-2,2 mm nail length: 10-50 mm output - pieces/min: 520 Location: In our warehouse

Condition: used, Year of construction: 1982, functionality: fully functional, machine/vehicle number: D12L/8249, Offer Number: D12L/8249 Machinetype: wire nail press Make: WAFIOS Cjdowi Tgvopfx Ac Nerb Type: N3 Constr. year: 1982 diameter range: 1,0-2,4 mm nail length: 10-50 mm output - pieces/min: 700 Location: In our warehouse

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: D12E/8139, Offer Number: D12E/8139 Machinetype: wire nail press Make: ENKOTEC Type: NB01 Constr. year: 1994 diameter range: 2.8-4.2 mm nail length: 60-103 mm output - pieces/min: 950 Location: Europe Credpfxowi Tmio Ac Njb

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: D12L/8288, Offer Number: D12L/8288 Machinetype: wire nail press Make: WAFIOS Type: N90 Constr. year: 2005 diameter range: 2,0-4,0 mm nail length: 50-100 mm Crsdswi Uc Eopfx Ac Njb output - pieces/min: 800 Location: In our warehouse