Used Wire Edm for sale (4,214)

Condition: excellent (used), For sale: Complete Waldmann & Weigl ER-220 electrical discharge machine, designed for precise removal of broken drills, taps, and cutting tools. Professional workshop solution from Germany, ideal for toolrooms, service shops, and mechanical workshops. • Manufacturer: Waldmann & Weigl GmbH, Germany • Model: ER-220 • Power supply: 220 V / 50 Hz • Working current: 1.5 A • Electrode range: from Ø1.0 mm to Ø10 mm (copper, tubular) • 6-stage erosion voltage adjustment (from gentle to intensive burning) • Electrode holder with height adjustment • Cooling pump with water tank • Control panel with operating mode selection • Complete documentation in German (original manual) • All components mounted on a mobile workshop table with castors. The machine is fully operational, complete, and ready for use. Indispensable for fast and safe removal of broken tools from workpieces without risk of damaging the component. Bjdpfx Asw Syyyeczsdk

Condition: ready for operation (used), Sillmann EDM LCD12L-CACS-SIL monitor from AGIE machine SN: 1183, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Bdodpfxji D Tvco Aczok

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. Bdodpfxemk S Sle Aczjk

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V -Power: 6.5 kW Bdedpfx Aceq Rxz Tszjk -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Bdodpfjf Nku Rox Aczek Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. On the last three photos you can see plants of this design in operation.

Condition: good (used), Zip Wire closed spiral in spools Bedpswunmbjfx Aczsdk 3 pallets of spirals, 12 whole new spirals + 12 started. In 3:1 and 2:1 spacing. Sold only in whole.

Condition: excellent (used), For sale: professional rotary electrospindle by the renowned brand System 3R (Sweden), designed for use with Charmilles EDM machines. The device is intended for precise rotation of graphite and copper electrodes during the EDM drilling process, ensuring high machining accuracy and quality. Technical data and features: • Manufacturer: System 3R, Sweden • Model/Reference: 1.6 SER 202101 • Compatibility: 3R clamping system • Original rotary spindle dedicated for EDM • Belt drive – stable torque transmission • Robust industrial design, suitable for continuous operation • System 3R holder with quick-change electrode mechanism • Fits machines incl. Charmilles (e.g. Roboform series) Condition: used, complete, in working order, with normal signs of use. Equipment of this class guarantees precision, reliability, and compatibility with 3R systems – an ideal solution for toolrooms, mould shops, and companies specializing in precise EDM machining. Bodew Sat Hepfx Aczodk

Condition: used, Module converter, electronic module Bdedpfxefcl H Uo Aczsk -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg

Condition: used, Module converter, electronic module Bdodpofcl H Iefx Aczjk -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -Dimensions: 275/275/H225 mm -Weight: 8.1 kg

Condition: like new (used), Year of construction: 2021, operating hours: 1,657 h, load capacity: 1,250 kg, lifting height: 7,000 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F7000 ID: 25101.6261 Category: Used Mast: 3F7000 Forks: 1200 mm Lowered height: 3200 mm Lifting height: 7000 mm Capacity: 1250 kg Year: 2021 Operating hours: 1,657 hours Battery: 48 v / 750 ah Options: - VNA truck - with wire guidance Bdjdpfexz Ufhex Aczok Condition: LIKE NEW!!

Condition: used, Year of construction: 1999, max 70 mm Bdsdpfx Acsw Sygaezok hydraulic ja

Condition: good (used), Year of construction: 1994, functionality: fully functional, Technical details table length 840 mm table width 600 mm ampere 60-120 A total power requirement 15-23 kVA weight of the machine ca. 2,75 t dimensions of the machine ca. 2760 x 1110 x 1840 m Additional information With controlled C-axis and 16-position tool changer. Bsdpfx Acsxzt Tdjzsdk WORKTABLE Table size: 840 x 600 mm Dielectric above table: 360 mm Maximum workpiece weight: 1000 kg T-slots: 4 x 10 mm Distance table to quill without chuck (max / min): 595 / 180 mm WORKHEAD X - Y travel: 565 x 400 mm Z travel: 415 mm X - Y - Z resolution: 0.001 mm C-axis resolution: 0.001 deg. Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg DIELECTRIC SUPPLY Tank volume: 400 liters Paper candle filters: 4 pieces GENERATOR Dimensions (height x width x depth): 1800 x 600 x 920 mm Weight: 300 kg Rated current: 60 – 120 A Power rating: 15 – 23 kVA Dimensions (height x width x depth): 2760 x 1110 x 1840 mm Weight: 2750 kg

Condition: used, Year of construction: 2022, table length 640 mm table width 540 mm 810 x 700 x 215 mm travel x / y / z 400 x 300 x 220 mm V-axis 120 mm U-axis 120 mm workpiece weight max. 500 kg Control M800 D-CUBES wire dia. 0,1 - 0,3 mm weight of the machine ca. ca. 3,1 t dimensions of the machine ca. 2,8 x 2,1 x 2,1 m Mechanical engineering concept: Hybrid design Machine included: - ODS - Optical Drive System - Tubular direct drives in XYUV axes - Linear scales in XYUV axes - Collision protection XYUVZ axes - Intelligent AT - Automatic wire threading for wire diameters 0.10 - 0.3 mm - Automatic fine hole search function - Easy 3D-Setup workpiece position detection - 5 controlled axes - prepared for additional axes - PFC - Precise Finish Circuit - H-FS - Finishing stage - LLS - Long Life System - 10 kg wire station - 4-sided framing table - hardened - Wire alignment block - Wire chopper - Compressor cooler Mitsubishi Electric M800 D-CUBES control system: - 19” full-touch monitor with gesture control - Hand pilot with configurable LCD display - Job planner incl. job interruption function - 3D CamMagic on board - Import of 3D Parasolid, 2D DXF / DWG - Graphic check: 3D, front and side view and top view - Operating and maintenance data output included - Interfaces: Ethernet TCP-IP, 2 x USB port - Corehole technology Incl. the following special options: Bdedpfx Acovt Ec Sezjk - ERGO-Lux light Ergonomic workspace lighting with LED floodlight Two LED lights, 3 x 6 watts each IP67 version for use in the work area Anodized aluminium housing with reflector insert - Training course 5-day basic seminar at a Mitsubishi training center Mitsubishi training center for 1 person if attended within 12 months of commissioning. Travel and accommodation costs are at your expense - all dimensions, weight and performance data without obligation - Used machine without warranty - interim sale reserved -

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 3,869 h, fuel type: electric, mast type: triplex, Manufacturer & Model: JUNGHEINRICH EKS 412 s Mast: Z + i - 3F9800 ID: 25114.5389 Category: Used Mast Type: Triplex (3F) Lowered Height: 3830 mm Lifting Height: 9800 mm Capacity: 1200 kg Platform Height: 9000 mm Order Picking Height: 10600 mm Initial Lift: Yes Cabin Width: 1300 mm Year: 2020 Operating Hours: 3869 Battery Capacity: 48 V / 620 Ah Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILT FUNCTION!! - PSA - Blue Spot - Adjustable Forks! - Induction / Wire Guidance Bjdpfx Acjxz Uglszedk

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 4,883 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 412 s Mast: Z + i - 3F9800 ID: 25114.5388 Category: Used Mast: 3F Lowered height: 3830 mm Lifting height: 9800 mm Capacity: 1,200 kg Platform height: 9,000 mm Picking height: 10,600 mm Initial lift: Yes Cabin width: 1,300 mm Bdjdpjxz Ugfjfx Aczsk Year: 2020 Operating hours: 4,883 hrs Battery: 48 V / 620 Ah Options: FULL options !! – Triplex mast – FFL – SAFETY doors with TILT FUNCTION !! – PSA – Blue spot – Adjustable forks – Induction / wire guidance

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 4,672 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 412 s Mast: Z + i - 3F9800 ID: 25114.5387 Category: Used Mast: Triplex (3F) Lowered height: 3830 mm Lifting height: 9800 mm Bodpfxjxz Uf Us Aczodk Capacity: 1200 kg Platform height: 9000 mm Picking height: 10600 mm Init.: Yes Cabin width: 1300 mm Year: 2020 Operating hours: 4672 hours Capacity: 48 V / 620 Ah Options: - Triplex mast - FFL - SAFETY doors with TILT FUNCTION!! - PSA - Blue Spot - Adjustable forks - Induction / Wire Guidance

Condition: like new (used), Year of construction: 2021, operating hours: 1,750 h, load capacity: 1,250 kg, lifting height: 7,000 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F7000 ID:25101.6260 Category: Used Mast: 3F7000 Forks: 1200 mm Lowered height: 3200 mm Lifting height: 7000 mm Capacity: 1250 kg Year: 2021 Hours: 1750 hours Battery: 48 v / 750 ah Bedpfx Acoxz Ufbszodk Options: - VNA truck - With complete wire guidance, LIKE NEW

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 5,550 mm, construction height: 2,360 mm, operating hours: 2,442 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast:Z + i - 3F5550 ID:25064.5758 Cat.:UsedMast:3F Lowered height:2360 mm Lifting height:5550 mm Capacity:1000kg Platform height:4750 mm Picking height:6350 mm Init.:Yes Bjdpfxjxz T T Rj Aczsdk Cabin width:1500 mm Year:2018 Hours:2441 hours Capacity:48v / 465ah Options:FULL options !!- Mast Triplex - FFL - DUAL controls!!!! - Adjustable Spoons! - 2 x Blue spot -PSA - High beam lights - Induction / Wire GuidanceLIKE NEW !!!

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 5,550 mm, construction height: 2,360 mm, operating hours: 2,482 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast:Z + i - 3F5550 ID:25064.5759 Cat.:Used Mast:3F Lowered height:2360 mm Lifting height:5550 mm Capacity:1000kg Platform height:4750 mm Picking height:6350 mm Init.:Yes Cabin width:1500 mm Year:2018 Hours:2482 hours Capacity:48v / 465ah Bdedpfx Ajxz T T Dsczsk Options:FULL options !!- Mast Triplex - FFL - DUAL controls!!!! - Adjustable Spoons! - 2 x Blue spot -PSA - High beam lights - Induction / Wire GuidanceLIKE NEW !!!

Condition: like new (used), Year of construction: 2017, load capacity: 1,200 kg, lifting height: 9,300 mm, construction height: 4,650 mm, operating hours: 4,903 h, fuel type: electric, mast type: duplex, Manufacturer + model: JUNGHEINRICH EKS 312 Mast: Z + i - 2W8300 ID: 25023.7516 Cat.: Used Mast: 3 Lowered height: 4650 mm Lifting height: 8300 mm Capacity: 1200 kg Bodpjxz T Nxefx Aczodk Platform height: 7500 mm Picking height: 9100 mm Init: Yes Cabin width: 1200 mm Year: 2017 Hours: 4903 hours Capacity: 48 v / 620 ah Options: - PSA ( Sick ) - Induction / Wire Guidance LIKE new !!!

Condition: like new (used), Year of construction: 2017, load capacity: 1,250 kg, lifting height: 9,300 mm, construction height: 4,650 mm, operating hours: 4,723 h, fuel type: electric, mast type: duplex, Manufacturer + model:JUNGHEINRICH EKS 312 Mast:Z + i - 2W8300 ID:25013.7542 Cat.:Demo Mast:2W Lowered height:4650 mm Lifting height:8300 mm Capacity:1200 kg Platform height:7500 mm Picking height:9100 mm Init.:Yes Cabin width:1200 mm Year:2017 Hours:4723 hours Capacity:48 v/ 620 ah - Bj 2015 Options:- PSA ( Sick ) - Induction / Wire GuidanceLIKE new !!! Bdodpfoxz T Nrjx Aczjk

Condition: like new (used), Year of construction: 2017, load capacity: 1,200 kg, lifting height: 7,950 mm, construction height: 3,400 mm, operating hours: 3,590 h, fuel type: electric, mast type: triplex, Manufacturer + model:LINDE V ( 5213 ) Mast:3F7950 ID:25013.1087 Cat.:Used Mast:3F Lowered height:3400 mm Lifting height:7950 mm Capacity:1200 kg Platform height:7400 mm Picking height:9000 mm Init.:Yes Cabin width:1300 mm Year:2017 Hours:3590 hours Capacity:48 v / 620 ah Options:FULL options !!- Mast Triplex - FFL - DOUBLE steering !!!! - SAFETY doors with NEIG FUNCTION ! - Adjustable Spoons ! - 2 x Bleu spot - Induction / Wire Guidance - End of line sensor under batteryComplete LIKE NEW !!! Bodpfx Acoxz T Izezsdk

Condition: like new (used), Year of construction: 2017, operating hours: 4,764 h, load capacity: 1,250 kg, lifting height: 6,000 mm, fuel type: electric, mast type: triplex, construction height: 2,830 mm, Manufacturer + model:JUNGHEINRICH EFX 413X + i - 100 - 3F6000 ( = 600 DZ ) ID:24096.5461 Cat.:Used Bodpfoxz T Hkox Aczedk Mast:3F6000 Forks:1000 mm Lowered height:2830 mm Lifting height:6000 mm Capacity:1250 kg Year:2017 Hours:4764 hours Capacity:48 v / 750 ah Options:TYPE ; EFX 413 X + i 100 - 600 DZ- VNA truck - Wire Guidance

Condition: like new (used), Year of construction: 2017, operating hours: 4,602 h, load capacity: 1,250 kg, lifting height: 6,000 mm, fuel type: electric, mast type: triplex, construction height: 2,830 mm, Manufacturer + model:JUNGHEINRICH EFX 413 X + i - 100 - 3F6000 ( = 600 DZ ) ID:24096.5462 Cat.:Used Mast:3F6000 Forks:1000 mm Lowered height:2830 mm Lifting height:6000 mm Capacity:1250 kg Year:2017 Bdjdpfx Ajxz T Hdeczsk Hours:4602 hours Capacity:48 v / 750 ah Options:TYPE ; EFX 413 X + i 100 - 600 DZ- VNA truck - Wire Guidance

Condition: like new (used), Year of construction: 2017, load capacity: 1,200 kg, lifting height: 8,300 mm, construction height: 4,650 mm, operating hours: 4,394 h, fuel type: electric, mast type: duplex, Manufacturer + model:JUNGHEINRICH EKS 312 Mast:Z + i - 2W8300 ID:24073.7549 Cat.:Used Mast:2W Lowered height:4650 mm Lifting height:8300 mm Capacity:1200 kg Platform height:7500 mm Picking height:9100 mm Init.:Yes Bdodpfsxz T Emex Aczok Cabin width ; 1200 mm Year:2017 Hours:4394 hours Capacity:48 v / 620 ah Options: - PSA ( Sick ) - Induction / Wire Guidancecomplete LIKE NEW !!!