Used Wire O Binding Machine for sale (95,605)

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE Rcjdpsw Spa Nofx Ab Rsh max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3

Condition: used, Year of construction: 2003, Axes X/Y/Z: 350mm/250mm/350mm, workpiece dimensions X/Y/Z: 650mm/580mm/250mm, max. workpiece weight: 100kg. Inner dimensions of working container: 860mm/620mm/360mm, rotation: 60rpm, capacity: 415l, filter quality: 3μm-5μm. Dimensions X/Y/Z: 2689mm/1855mm/2593mm, empty weight: approx. 3200kg, filled weight: approx. 4200kg, control: AgieVision. Documentation available. Redpfx Aew T Rqljb Rjch

Condition: excellent (used), Year of construction: 2018, operating hours: 21,250 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, workpiece height (max.): 305 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 820 mm, table width: 840 mm, overall weight: 4,090 kg, table length: 640 mm, A Mitsubishi MV2400R is for sale. Travel: X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm U/V-axis: +/- 75 mm Design: 4-sided frame table, hardened with automatic vertical sliding door as a water bath machine Table size: 840 x 640 mm Rcsdpfjwlq Hlex Ab Reh Workpiece size: max. 1050 x 820 x 305 mm Workpiece weight: max. 1500 kg Wire ¯: 0.1 to 0.3 mm for wire spool holder 10 kg Control: MITSUBISHI M800 with 19" full-touch monitor (including handheld pilot with configurable LCD monitor) Closed control loops Min. axis resolution 0.05 μm Generator: H-FS fine finishing generator Digital AE II Generator Equipment: Tubular drives with linear scales (X/Y/U/V) Handheld pilot with configurable LCD monitor 20 kg wire station Angle Master Advance II Set Consumable parts box Ergolux lamp Corehold function Job planner Filter pump pressure sensor Operating data output Free software update as needed Digital electricity meter / filter pressure sensor Ethernet/DNC/FTP Automation ready McAfee AntiVirus embedded McAnywhere Service 3D CamMagic on board Machine weight: 4,090 kg Installation dimensions: 2687 x 3030 x 2150 mm Option: HIRSCHMANN clamping system (not included in price)

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, GF AgieCharmilles Progress VP3 Year of manufacture: 2009 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (out of tank) Achievable surface quality: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control unit Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine is cleaned and fully overhauled after receipt of order. You will receive a 6-month warranty on all machine parts. We are also happy to offer commissioning and training services. Rcodpfoxggdmox Ab Rsh

Condition: excellent (used), Year of construction: 2018, operating hours: 9,600 h, functionality: fully functional, Muller Martini Pantera Year : 2018 Mod: 1577.0404 Excellent condition, Only 9600 hours worked! Equipped with: 8 station MM 3692 gatherer hand feed M.M. ‘ASAC’ calliper control Spiral raceway element EVA spine glue pre-melt tanks Hotmelt spine glue unit Rcedpfxoxp N Sro Ab Roh Hotmelt side glue unit Nipping station Lay-down delivery unit to conveyor system Muller Martini 3676 Granit Location : France

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 25227, conveyor belt width: 60 mm, punching force: 7 t, Two Bihlers are for sale. Price per piece Rcjdpev Nv Dlefx Ab Reh A reel is available if needed.

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min Rcedpfx Ajw Spbtjb Rjh rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3

Condition: used, Year of construction: 1998, Sodick AM 35 CNC EDM Machine Model: AM 35 Year: 1998 Control: Neuro Fuzzy II 40: ‘X’ axis Travel: 350mm ‘Y’ axis Travel: 250mm ‘Z’ axis Travel: 250mm Tank Dimensions: W 790 x D 590 x H 320mm Max. electrode weight: 50 kg Max. Table Load: 550 kg With: Magnetic chuck 350 x 250mm Rcodpowqgh Asfx Ab Rsh

Condition: used, Year of construction: 1999, functionality: fully functional, Fully functional machine. Rcjdpfxjwmw I Se Ab Rsh Viewable at our Semsales premises from mid-June.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: Rjdpfx Aeuuz Iijb Roch - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set

Condition: good (used), Year of construction: 2008, operating hours: 16,000 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, Work tank dimensions W x D: 1,264 x 973 mm Max. workpiece weight: 1,500 kg Distance floor to table surface: 1,000 mm Machine dimensions W x D x H: 2,100 x 2,800 x 2,350 mm Rcodpfx Abjxg Il Ss Rsh Machine weight: 5,300 kg Travel of U and V axes: 770 x 520 mm

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Redpfew Titlsx Ab Roch Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: good (used), functionality: fully functional, This hammering machine is a model for processing wires. The wire was sharpened on this machine. The machine has been partially overhauled. The mechanical hammer drive was completely dismantled, reworked, greased and reinstalled. The outer parts of the machine were partially refurbished. However, the electrics are old but fully functional. The motor has also been refurbished and is 1.5 KW. The machine has a hammering tool for wire sharpening included, wire diameter up to 1.5 mm. The name of the machine is unknown, but we assume it is an HMP or Felss. Rcjdpfx Aborqfxwo Rsh

Condition: used, Year of construction: 2004, Travel path: X 500 mm Rjdpfx Asw Emfdob Rjch Y 350 mm Z 300 mm incl. cooler incl. large wire spools

Condition: excellent (used), Year of construction: 2002, operating hours: 34,000 h, functionality: fully functional, Agie Excellence 2F, year 2002. Machine in excellent condition. Can be inspected at our premises in Semsales, Switzerland. Rjdpfow N Tazox Ab Roch

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Versant 3100 Press’ Object of sale: 1 x Xerox Versant 3100 with the following equipment: incl. Fiery Server EX3100 incl. Paperdeck A-CF03 incl. Booklet Finisher A-GW04 incl. GBC Advanced Punch Pro incl. GBC e-Wire Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Rcedpfx Aevf Hhyjb Rsh Meter readings: Total: Approx. 1,682,602 pages Colour: Approx. 1,190,093 pages Black: Approx. 492,509 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: excellent (used), Mitsubishi wire EDM machine FA20S, year of manufacture: 2006 With accessories Rcodjwt N Uqspfx Ab Reh More pictures and data will follow shortly.

Condition: good (used), functionality: fully functional, Due to cessation of operations at the Norderstedt site, for sale as-is, not loaded. Kugler Paternoster punching machine, suitable for Wire-O and index tabs Format 50 x 50 cm Includes 2 punching tools Final price reduction!!! Rodpfsrn R Rfox Ab Rjch

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06F2S765, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, The machine is currently serviced and in good condition. The wear parts have been extensively replaced. The EDM machine has barely been used in the last four years. Transport, installation and operator training can be organized at an additional cost. Rcodpfswtd Edsx Ab Roh

Condition: excellent (used), Agie Wire EDM Model: AGIE Cut Classic V3 Control: AGIE X – axis Travel: 500mm Y – axis Travel: 350mm Z- axis Travel: 426mm Workpiece Length: 1050mm Work piece width: 650mm Work piece height: 420mm Work piece weight: 800 kgs Dimensions: 1940 x 2300 x 2600mm high Redpfx Abov Hryws Rjch Weight: 3460 kg

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 690 h, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 222 mm, total length: 300 mm, total width: 185 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 820 mm, type of input current: three-phase, overall weight: 2,850 kg, Equipment: cooling unit, GF CUT E 350, year 2022. Machine like new, only 685 hours of operation (upgradable). Available in our Semsales workshop at the end of February. Rjdpsvvld Iofx Ab Rjch

Condition: like new (used), Year: 2023 Machine travels: 800 x 450 x 640 x 360mm (X * Y * Z * W) Rcedpjvgd Rzofx Ab Rjh Machine Dimension: 1910 x 1990 x 2240mm (2600mm Max) (W x D x H) Machine Weight: 1700Kg Max Weight for workpiece: 500Kg 2 Axis indexer with 3 jaw chuck Usable Electrode Diameter: ø 0.1 ~ ø 6.0mm Usable Electrode Length: 200 ~ 600mm, Drilling depth : 360mm Maximum Power: 3ø 415V 50㎐(Changeable) Max Allowable Current: 30A Rated Power Capacity: 5KVA Pneumatic Pressure Required: 5 bar Self-contained water system with filtration and deionisation system with sensor CNC programmable, from DXF or CNC auto hole patterns for PCD, Rows, Square, or GM code Auto routines for, set up, hole finding, simple programming

Condition: refurbished (used), Year of construction: 2007, operating hours: 15,125 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 200 mm, total length: 260 mm, total width: 280 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, type of input current: three-phase, overall weight: 3,300 kg, Charmilles Robofil 440SLP, 2007. Only 15,100 hours of work. Machine fully serviced and working. Rodpfov Rbxwex Ab Rjch Viewable at our Semsales premises in Switzerland.

Condition: refurbished (used), Year of construction: 2012, operating hours: 24,760 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 200 mm, total length: 220 mm, total width: 200 mm, type of input current: three-phase, empty load weight: 2,450 kg, GF CUT 200 MS, year 2012. Excellent condition, the machine will be cleaned, revised and tested. Option 0.1 mm. Available in our workshop in Semsales during March. Rcsdpfx Abovvlhye Reh

Condition: excellent (used), Year of construction: 2005, operating hours: 27,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, empty load weight: 2,500 kg, Equipment: documentation/manual, Machine in excellent condition. Redpjv Im R Tefx Ab Rsch Machine already cleaned. Sold as is or revised on request. Machine visible in our premises in Semsales in Switzerland.