Used Wire Winder for sale (3,229)

Condition: used, Year of construction: 2003, operating hours: 81,060 h, functionality: fully functional, machine/vehicle number: 921083, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 2,020 mm, total width: 2,050 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, table height: 1,000 mm, empty load weight: 2,450 kg, table load: 750 kg, input voltage: 400 V, tank capacity: 760 l, distance table to quill: 220 mm, input frequency: 50 Hz, input current: 18 A, Equipment: documentation/manual, The table has a hard chrome finish. Bwsdpfx Aioz Spd Iswow In addition, we also sell the matching EasyChange XT 4-position workpiece changer from Erowa; see the nameplate for the model. Pick-up only.

Condition: excellent (used), Year of construction: 2015, operating hours: 11,000 h, functionality: fully functional, The machine comes from a toolmaking workshop and has always been treated with great care. It was in use until recently and was subsequently stored. The machine's functionality has been checked and tested. It is fully operational and can be inspected on-site and tested while powered and under load at any time by appointment. Bwodpfxo Agxglo Aiwjw

Condition: used, Year of construction: 1998, Wire-cut EDM machine Manufacturer: FANUC Model: ROBOCUT ALPHA-0C Year of manufacture: 1998 Control system: FANUC Series 16-W Technical details: Control system: FANUC Series 16-W X-axis: 320 mm Y-axis: 220 mm Z-axis: 180 mm U-axis: 120 mm V-axis: 120 mm Rapid traverse (X): 900 mm/min Bsdpfx Aozrh N Uoiwoww Rapid traverse (Y): 900 mm/min Rapid traverse (Z): 450 mm/min Rapid traverse (U): 450 mm/min Rapid traverse (V): 450 mm/min Max. workpiece weight: 250 kg Machine weight: approx. 1.5 t Connected load: 11 kVA Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 4,059 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.0180 Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Platform height: 8900 mm Picking height: 10500 mm Initialized: Yes Cabin width: 1200 mm Year: 2015 Hours: 4059 hours Capacity: 48 V / 620 Ah - Year of manufacture: 2021 Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILTING function!! - Adjustable forks! Bwjdpfjzv H N Ijx Aiwjw - PSA (Sick) - Induction / Wire Guidance - End-of-travel sensors on the mast

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: 54452, Wire erosion machine Bwjdpoz Nhwrjfx Aiwsw Charmilles P25 Year of manufacture: 1983

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, wire diameter (max.): 8 mm, WAFIOS BMU 40 CNC 3D Wire Bending Machine | 2015 | Decoiler | Tooling | Complete Production Cell Complete CNC Wire Bending and Forming Cell WAFIOS BMU 40 CNC wire bending machine | Wire decoiler / pay-off system | Tooling sets | Conveyor and collection system | Safety enclosure | CNC control For sale: a complete used WAFIOS BMU 40 CNC wire bending and forming machine with peripheral equipment and extensive tooling. The machine is designed for automatic production of formed wire components and is offered as a complete production cell. The machine is currently installed together with the wire feeding system, decoiler, finished-part handling equipment, safety guarding and dedicated tooling. The system consists of: • WAFIOS BMU 40 CNC 3D wire bending machine • CNC control unit with operator panel • Handheld operator control • Wire feeding and straightening section • Wire decoiler / pay-off unit Bodpjz R Rpbsfx Aiwoww • Automatic wire forming and bending section • Finished-part conveyor / collection system • Tooling and forming accessories • Tool cabinet with dedicated tooling • Additional machine tools and accessories • Safety fencing with access gates • Electrical and control equipment Technical Specifications • Manufacturer: WAFIOS AG, Germany • Model: BMU 40 • Machine type: CNC wire bending / forming machine • Number of CNC axes: 3 • Wire diameter range: 3 - 8 mm • Year of manufacture: 2015 • Machine No.: 2 7656 018 • Plan No.: 7656 2 9000 18 • Power supply: 3-phase, 400 V • Frequency: 50 Hz • Rated current: 13 A • Control voltage: 24 V DC / 230 V AC • CE marked Equipment Included • Wire decoiler / pay-off system • Wire feeding and straightening equipment • CNC operator station with screens and keyboard • Handheld control unit • Dedicated forming tools, dies, guides and accessories as shown in the photos • Tool storage cabinet • Finished-part conveyor / collection table • Product collection racks • Safety guarding around the complete production cell • Additional maintenance and setup tools as shown in the photos Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell with peripheral equipment and tooling. The equipment is offered together with the accessories and tooling shown in the photos. Additional Information • Complete production cell available • Extensive tooling and accessories included as shown in the photos • Wire decoiler included • Finished-part handling / collection system included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility Location Koszalin, Poland

Condition: good (used), Year of construction: 1999, functionality: fully functional, FOR SALE: FANUC ROBOCUT α-1iA Wire EDM Machine Specifications and technical capabilities (Manufacturer’s plate): Bwsdpfx Ae Af Auvsiwew • Model: ROBOCUT α-1iA (Type A04B-0312-B002/E5) • Year of manufacture: October 1999 (Serial number: P99X11330) • Numerical Control: FANUC Series 18i-W • Axis travels (Stroke): X = 520 mm | Y = 370 mm | Z = 410 mm • Taper axes: U = 120 mm | V = 120 mm • Maximum workpiece weight: 1,000 kg (1 tonne) • Power supply: 200/220V (Three-phase, 50/60 Hz) – Required power: 13 kVA • Machine weight: 2,700 kg (2.7 tonnes) Included equipment: • Original control panel with remote screen and keyboard • Work tank with full protective enclosure • Automatic wire threading system (roller guide system) • Remote manual control unit Condition: • Used machine, fully operational, sold as is.

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 3,483 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.016 Category: Used Bjdpszv H Nzofx Aiweww Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Picking height: 10500 mm Initial inspection: Yes Cabin width: 1200 mm Year: 2015 Hours: 3483 hours Capacity: 48 V / 620 Ah - Year of manufacture: 2021 Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILTING function!! - Adjustable forks! - PSA (Sick) - Induction / Wire Guidance - End-of-travel sensors on the mast

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 5,075 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.0175 Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Platform height: 8900 mm Picking height: 10500 mm Initialized: Yes Cabin width: 1200 mm Year: 2015 Hours: 5075 hours Capacity: 48 V / 620 Ah Bwjdpfxozv H N Ue Aiwjw Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILTING FUNCTION!! - Adjustable forks! - PSA (Sick) - Induction / Wire Guidance - End-of-travel sensors on the mast

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 4,672 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 412 s Mast: Z + i - 3F9800 ID: 25114.5387 Category: Used Mast: Triplex (3F) Lowered height: 3830 mm Lifting height: 9800 mm Capacity: 1200 kg Platform height: 9000 mm Picking height: 10600 mm Init.: Yes Cabin width: 1300 mm Year: 2020 Operating hours: 4672 hours Capacity: 48 V / 620 Ah Options: - Triplex mast - FFL - SAFETY doors with TILT FUNCTION!! - PSA - Blue Spot - Adjustable forks Bjdpfx Aijzuud Rjwoww - Induction / Wire Guidance

Condition: good (used), machine/vehicle number: Machine No.: 2 6108 031, WAFIOS R 31 Wire Straightening and Cutting Machine | Decoiler | Omron Control | Tooling | Complete Production Cell Complete Wire Straightening and Cutting System WAFIOS R 31 wire straightening and cutting machine | Wire decoiler / pay-off unit | Omron operator panel | Long material handling system | Extensive tooling | Safety enclosure For sale: a complete used WAFIOS R 31 wire straightening and cutting machine with peripheral equipment and extensive tooling. The machine is designed for straightening and cutting wire supplied from coils and is offered as a complete production cell, including the decoiler, wire processing equipment, long finished-part collection system, control equipment, tooling and safety guarding. The system consists of: • WAFIOS R 31 wire straightening and cutting machine • Wire decoiler / pay-off unit • Wire feeding and guiding system • Wire straightening section • Cutting system • Long finished-part handling / collection system • Omron operator panel • Digital weighing system • Electrical control cabinet • Dedicated tooling and accessories • Tool storage cabinet • Safety fencing and access gates • Emergency stop and safety system Technical Specifications • Manufacturer: WAFIOS • Model / Type: R 31 • Machine type: Wire straightening and cutting machine • Machine No.: 2 6108 031 • Operator interface: Omron • Wire supply: Coil / decoiler system • Integrated digital weighing equipment Equipment Included • Wire decoiler / pay-off system Bede Abal Ropfx Aiwoww • Wire feeding equipment • Straightening and cutting equipment • Long material support and finished-part collection system • Omron operator panel • Digital weighing equipment • Electrical control cabinet • Extensive set of dedicated tooling • Straightening dies and rollers • Wire guides and bushings • Cutting tooling • Tool storage cabinet • Safety fencing around the production cell • Supporting frames and accessories shown in the photos Tooling The machine is offered with a substantial set of dedicated tooling and spare tooling components. The photos show multiple straightening dies, rollers, guides, bushings, cutting components and other machine-specific accessories stored in dedicated drawers. Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell together with its peripheral equipment, material handling system and safety guarding. The machine is offered with the tooling, accessories and additional equipment shown in the photos. Additional Information • Complete production cell available • Wire decoiler / pay-off unit included • Long finished-part handling system included • Extensive dedicated tooling included as shown in the photos • Digital weighing equipment included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility

Condition: used, functionality: unexamined, Photo 1 to 10 2x Stahl jacks, AS4016, 6,300 kg capacity Year of manufacture: 1996 Center-to-center distance: 1400 mm Wheel track: 50 mm Distance between wheels (lengthwise): 1800 mm Total length: 2000 mm Price per unit: €3,800 Photo 10 to 24 1x Stahl jack, 6,300 kg capacity Year of manufacture: 1975 Bodpfx Ao Afzm Rsiwsww Price: €2,750 Photo 24 to 32 2x Stahl jacks, AS 4025-16, 5,000 kg capacity Year of manufacture: 1998 Price per unit: €3,250

Condition: excellent (used), Year of construction: 2011, operating hours: 6,800 h, functionality: fully functional, machine/vehicle number: 0339, travel distance X-axis: 400 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 250 mm, total height: 2,220 mm, total length: 2,395 mm, total width: 2,240 mm, wire diameter (max.): 0.3 mm, type of input current: three-phase, table width: 636 mm, overall weight: 3,950 kg, table length: 473 mm, table height: 995 mm, empty load weight: 3,950 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 38 A, Equipment: cooling unit, documentation/manual, Good morning, Bedpfszzwrkox Aiwoww For sale is a Sodick AG400L LN2W wire EDM machine. The machine is in perfect working order and was used for our own tooling production. It has been maintained in excellent condition and, despite its age, has only 6,800 operating hours.

Condition: excellent (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Mitsubishi MV2400R precision wire cutting machine (2018) in very good condition, in constant use, fully functional and ready to work – very little used (2700 hours). Technical data: Year of manufacture: 2018 Manufacturer: Mitsubishi Electric Model: MV2400R Control: Mitsubishi M700 series Axis travel range: X = 600 mm, Y = 400 mm, Z = 310 mm Max. workpiece dimensions: 1050 × 800 × 295 mm Max. workpiece weight: 1500 kg Worktable: 840 × 700 mm Wire diameter: 0.1 – 0.3 mm (currently using 0.25 mm) Positioning accuracy: ±1 µm Power supply and cooling – complete, functional Machine dimensions: 2687 × 3030 × 2150 mm Weight: approx. 3500 kg Equipment and accessories: Original wire guides - upper and lower Bwedps Agggyjfx Aiwsw Automatic Wire Threading (AWT) Filter tank with ion exchange resin Complete set of mounting and supporting devices (in a carrying case) Wire alignment device Original documentation and operating manuals Additional equipment purchased for over €10,000: Wire guides for angle cutting - upper and lower 30 degrees Processor battery Precision vice for clamping workpieces 0-600 PSI pressure gauge - 2 pcs MV power contact (259320) - 2 pcs Nlsbiawhcsxu Hvleloa CF card with software 0.25 mm EDM wire - 3 new spools 2 sets of new filters Machine transport and handling system. Machine Condition: The machine is well-maintained, regularly serviced, and ready for immediate operation. Filtration and cooling systems are included. We can assist with transport, setup, and commissioning of the machine, as well as operator training – we are EXPERIENCED. Price is negotiable. I will issue a VAT invoice, export 0%.

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 5,550 mm, construction height: 2,360 mm, operating hours: 2,442 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + i - 3F5550 ID: 25064.5758 Cat.: Used Mast: 3F Lowered height: 2360 mm Lifting height: 5550 mm Capacity: 1000 kg Platform height: 4750 mm Picking height: 6350 mm Init.: Yes Bsdpfxozv Ru Uj Aiweww Cabin width: 1500 mm Year: 2018 Hours: 2441 hours Capacity: 48 v / 465 ah Options: FULL options!! - Triplex mast - FFL - DOUBLE steering!!!! - Adjustable forks! - 2 x Blue spot lights - PSA - Floodlights - Induction / Wire guidance

Condition: excellent (used), For wire diameters of 17.2 mm Drawing die diameter (capstan): 1100 mm Drawing speed: 10 m/min Machine weight: 6000 kg For screw manufacturing/cold forming Bsdpfx As Afumdjiwoww

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm; industrial pallets and quarter pallets can be wrapped as well, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift Bjdszzz Rdspfx Aiwsww - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: used, Year of construction: 1997, functionality: not functional, type of input current: three-phase, overall weight: 422 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 14 A, Equipment: cooling unit, documentation/manual, We offer this used AGIE AGIECUT 125 wire EDM machine, manufactured in 1997. Type: AGIEPULS MMD Serial number: 491.010 Electrical diagram: 624262.2 Weight: 422 kg Voltage: 3 x 400 V Frequency: 50 / 60 Hz Rated current: 14.75 A The machine is currently disconnected. All electronic components, circuit boards, and the numerical control unit are intact. We suggest using it for spare parts recovery. If you have any questions or require further information, please do not hesitate to send us a message or call us. Bsdpfxsz Affno Aiweww

Condition: excellent (used), Year of construction: 1998, Ref:11126 . 1998 Rilecart B-599 Automatic Wire Binding Machine A productive ‘Wire-O’ binding machine with speeds up to 4000 bindings per hour, able to bind a wide variety of book thicknesses using diameters from 5/16” up to 1 inch for a maximum binding thickness of 23 mm. Comprising; Hand feed position for the feeding of pre punched book blocks B599 Automatic closing unit with; Twin Spool wire unwinds system, with paper waste extraction, with automatic change over when spool is low / empty, which ensures consistently high production. Computer controlled programming of binding, from one length, skip feed, up to five lengths in one pass. Automatic wire cutter, toothed belts for different pitch, 3:1 and 2:1. Sprockets for 2:1 and 3:1 pitch. Capable of processing either round or square punched work. Speed adjustable up to 4000 bindings per hour, depending on format, thickness, operator skill, and the quality of work being bound. Dedicated wire guide, turning, closing tools for each diameter, with fast change over times possible due to easy to install methods for the tooling. Microprocessor controlled quality checking systems to ensure that production runs smoothly, with read out on the computer screen advising the operator and management of faults, and productivity information. Extended shingle belt delivery. A set of tools for all common sizes of wire from 5/16” up to 1”. Specification: B599 – Formats, Max. binding size: 400mm, Max. transport size: 500 mm Bwedpfx Aszmx Udjiwsw Min. binding size: 100mm, Min. transport size: 80 mm Max. bind thickness: 23 mm, Min. 3 mm Max. binding wire diameter: 1”, Min. 5/16” Tooling included; 2:1" pitch - 1/2", 9/16", 5/8", 3/4", 7/8" & 1". Max. working speed: 4,000 books/hour. Electric supply: 3 x 380V. + neutral, 50 Hz. Power req. 8 kW. Compressed air supply (required): 8 Atm,10 mc/hour.

Condition: used, Year of construction: 2016, Overview This Haloila Octopus Compact is an automatic rotary-ring stretch wrapper for palletised loads, built in 2016 by Oy M. Haloila Ab in the inline version. It is sold together with its pallet roller conveyor with pallet lifter and its control cabinet. The machine was specified for wrapping barrels and canisters on pallets, is in very good condition and fully functional, and has been out of production since July 2024. It is still installed and under power and can be inspected on site. The rotating ring carries the film carriage around the stationary pallet, so the load itself is never turned - a compact layout suited to lines where the pallet runs straight through the winder on the conveyor. Technical data - Manufacturer: Haloila - Model: Octopus Compact, inline version - Year of manufacture: 2016 - Machine type: automatic rotary-ring pallet stretch wrapper (pallet winder) - Designed output: 32 pallets per hour (reference pallet height 1,200 mm, 14 wraps per pallet, double wrapping) - Pallet formats: 1,000 x 1,200 mm, Euro 800 x 1,200 mm and special 1,200 x 1,200 mm - Load: up to 1,200 x 1,200 mm, height 500 to 1,200 mm, up to 1,000 kg - Conveyor: roller conveyor, height 390 mm, speed 15 m/min, effective width 1,285 mm, roller pitch 166 mm, Movimot geared motors - Film carriage: AC-powered, pre-stretch up to 230 % - Film seaming: heat-seal pad - Power supply: 3 x 400 V, 50 Hz + N + PE - Connected load: 4 kW - Rated current: 10 A - CE mark on the machine plate Equipment - Rotating ring with film carriage and film pre-stretch unit - Roping device - Pallet roller conveyor through the winder, with chain transfer section and pneumatic pallet lifter with sensors - Photoelectric sensors for pallet and load height detection, photocells for load position - Control cabinet and touchscreen operator panel (German), signal tower - Signal exchange interface (DP/DP coupler) for connection to a line control - Safety fencing around the wrapping zone, safety light curtains at infeed and outfeed with muting - Restart push-buttons at the infeed Condition Used, very good condition and fully functional. Out of production since July 2024. Sold without warranty. Availability Bwjdpfxoz R Sxdj Aiwjw Available immediately. The machine is still installed: dismantling and loading are to be arranged by the buyer. The matching oil filling line from the same site can also be offered on request. Location: Germany.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 820 mm, warranty duration: 6 months, Equipment: documentation/manual, GF AgieCharmilles CUT E350 Year of manufacture: 2015 Wire EDM machine with automatic wire threading Travel ranges (X/Y/Z): 350 x 250 x 250 mm Travel ranges (U/V): +/- 45 mm Taper / height: 30° at a height of 77 mm Bjdpez Uwf Ajfx Aiweww Max. workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Excellent surface finish for carbide/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 or 0.25 mm User-friendly AC CUT HMI 2 control interface Operation via 19" TFT touchscreen Machine dimensions: 1750 x 2470 x 2200 mm Total weight without dielectric fluid: 2525 kg After receiving the order, we will clean, service, and thoroughly test the wire EDM machine. We can also perform a test cut or an on-site inspection under power beforehand. We can also handle commissioning and training. We offer the following options: - Transport and installation - Cooling unit - Clamping devices - Wire / filters / resin

Condition: used, Year of construction: 2011, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 430 mm, Wire EDM Machine Manufacturer: MITSUBISHI Bodpfx Aez St Tdjiwsww Model: FA20S Year of manufacture: 2011 Control system: MITSUBISHI W31FSA Technical details: X-axis: 500 mm Y-axis: 350 mm Z-axis: 430 mm Workpiece weight: approx. 1,500 kg Condition: Used Technical features & accessories: - External wire pay-off unit - External electrical cabinet - External dielectric tank (TFA20S-A) - External generator Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1320, For sale: SODICK CNC wire-cut EDM machine - Model: AQ325L LN 1W - Year: 2002 - Serial No.: 1320 Bjdpfx Aez Iywasiwjww The machine has been regularly maintained by BTS COMPANY d.o.o. and CELADA d.o.o. It was used for machining workpieces weighing up to 5 kg and for various toolmaking applications. Thanks to its precision, it operates with the accuracy of a measuring machine. It is connected to the power supply and ready for operation.

Condition: used, Year of construction: 2006, Overview Bwodpfx Aij Ahgtiewow This Tempo-Pack SATURN is a rotary stretch wrapper for pallet loads, built in 2006 and supplied as a complete end-of-line system: infeed roller conveyors, a top-sheet dispenser, the wrapping station and outfeed conveyors with a 90° turn in an L-shaped layout. It was designed for cartons on Euro and half pallets at an output of 60 pallets per hour. The film carriage rotates around the stationary pallet, so the load is not turned during wrapping. Technical data - Manufacturer: Tempo-Pack - Model: SATURN - Year of manufacture: 2006 - Output: 60 pallets per hour - Product: cartons on pallets - Pallet formats: 1,200 x 800 mm (Euro pallet), 800 x 600 mm (half pallet) - Maximum load footprint: 1,300 x 1,100 mm - Maximum load height including pallet: 1,800 mm - Maximum load weight: 1,500 kg - Conveyor height: 150 mm - Stretch film height: 500 mm - Top-sheet film width: 1,400 mm - Power supply: 3 x 400/230 V, 50 Hz, N, PE; 32 A - Compressed air: 6 bar - Machine height: 2,910 mm; minimum hall height 2,900 mm in the wrapper area - Layout footprint: approx. 13,590 x 6,750 mm Equipment - Rotary stretch wrapper with film carriage - Top-sheet dispenser ahead of the wrapper - Powered roller conveyors on infeed and outfeed, with a 90° transfer to the outfeed line - Control cabinet with touch panel operator interface - Safety fencing with access door - Layout drawing available Condition Used, functional and ready for operation. Viewing on site is possible by appointment. Availability Available immediately. Location: Germany.

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 5,550 mm, construction height: 2,360 mm, operating hours: 2,482 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + i - 3F5550 ID: 25064.5759 Category: Used Mast: 3F Lowered height: 2360 mm Lifting height: 5550 mm Capacity: 1000 kg Platform height: 4750 mm Picking height: 6350 mm Initial inspection: Yes Cabin width: 1500 mm Year: 2018 Hours: 2482 hours Bwodpfxezv H Tyo Aiwjw Capacity: 48 V / 465 Ah Options: FULL options!! - Triplex mast - FFL - DOUBLE steering!!!! - Adjustable forks! - 2 x Blue spot lights - PSA - Floodlights - Induction / Wire Guidance