Used Wire Winder for sale (3,231)

Condition: ready for operation (used), Year of construction: 2021, arm reach: 2,010 mm, total width: 4,000 mm, load capacity: 10 kg, overall weight: 8,000 kg, product length (max.): 5,200 mm, number of axes: 6, Welding robot manufactured in 2021. This Yaskawa Robotic Welding Cell RWC L1_OS 15330 features a robust configuration with multiple Yaskawa Motoman robots and advanced welding equipment. It includes a maximum reach of 2,010 mm and a payload capacity of 10 kg. If you are looking to get high-quality welding capabilities, consider the Yaskawa Robotic Welding Cell RWC L1_OS 15330 we have for sale. Contact us for further details. • Power supply: 400 V / 50 Hz Pedpfx Ajz N Hrbebuorc • Rated power: 70 kVA • Main fuses: 3 × 100 A • Compressed air supply: 6 bar Additional equipment • Robots: • 2× Yaskawa Motoman MA2010 (6 axes; max. reach 2,010 mm; payload 10 kg; repeatability ±0.08 mm) • 2× Yaskawa Motoman MA1440 (6 axes; max. reach 1,440 mm; payload 6 kg; repeatability ±0.08 mm) • Robot controller: • Yaskawa DX200 multi-robot controller • Positioner: • Yaskawa RWV2-M2-1500-2500-1850 (max. payload 1,500 kg; distance between mounting plates 2,500 mm; swing diameter 1,850 mm; 3 external robot axes; weight approx. 3,400 kg) • Welding equipment: • 4× Fronius TPS400i welding power sources • 4× Fronius WF 25i wire feeders • 4× Fronius CU 1400 cooling units • 4× Fronius welding torches • 3× Abicor Binzel automatic torch cleaning units • 3× Q-Set automatic torch calibration systems

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks Prodpfez N Hxhjx Abujc * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: ready for operation (used), functionality: fully functional, USED PULSED INVERTER WIRE WELDER, 400 Amps, MIGATRONIC BDH 400, refurbished like new. Psdpfx Aezxwzyebuorc

Condition: ready for operation (used), Year of construction: 2024, load capacity: 20 kg, arm reach: 3,000 mm, number of axes: 6, This 6-axis OTC Daihen FD19-V25L robot arm was manufactured in 2024. It is designed for versatility and precision in various applications. If you are looking to get high-quality automation capabilities, consider the OTC Daihen FD19-V25L robot arm we have for sale. Contact us for further details. • Robot model: MEGAWELD-V25L • Robot module: MEGAWELD-V25L robot module • Robot controller: Included • Teach pendant: Included; 15 m cable Additional equipment • External axis: 1-axis kit, 4.5 kW • External-axis servo motor: AC servo, 2.0 kW • External-axis cable: 20 m • Robot monitoring: Robot Monitoring Unit Predoz I S I Dopfx Abujc • Fieldbus: PROFINET board • Multi-axis software: Multi Synchromotion (up to 4 mechanisms) • Laser sensor: HD19-QF laser search • Sensor head: HD19-QF • Sensor controller: HD19-QF, 10 m • Shock sensor: Included • Welding system: WPS, type P403 • Cooling: Water-cooling unit • Welding torch: 500 A, 45°, water-cooled, Fe/SUS • Wire feeder: 4R wire feeder • Pneumatic cleaning station: WRS-SC22XA SE • Transformer: 7 kVA • Control voltage/system: CE kit / transformer case & noise filterThe robot and welding quipment is brand new. Newer installed. We have 3 identical units for sale.

Condition: ready for operation (used), Packaged welding wire Pjdpfozu N Ahox Abuorc AL 100 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 4604060239, type of input current: three-phase, input voltage: 400 V, pressure: 6 bar, operating pressure: 6 bar, temperature: 35 °C, power: 11 kW (14.96 HP), input current: 20 A, Equipment: CE marking, documentation/manual, Automatic Pallet Winder fully operational, last used 12.2024. Wrapping speed appr 70-100 pall/h. All conveyors and safety cages included. Can pair with H&K Palletizer as a packing system to be negotiated. Pjdpfx Abjyrcf Sjuorc

Condition: used, mileage: 1,800 km, first registration: 04/2020, overall weight: 9,000 kg, axle configuration: 2 axles, These front-mounted sweepers can be operated via the front PTO shaft. Of course, we can also accommodate your specific requirements, special requests, and additional optional equipment. The brush shafts are equipped as standard with alternating plastic and wave wire discs to achieve the best possible sweeping performance, even with heavy and stubborn dirt. ? Dücker FKM 2400 ? With municipal mounting plate receiver ? Implement plate size 3 and 5 ? Very little use, always stored in a shed ? Working width 0°. 2,400 mm Prjdpfxjz Ta Rxe Abuoc ? Working width 15° 2,300 mm ? Working width 30° 2,075 mm ? Sweeper roller diameter: 600 mm ? Hydraulically raise/lower ? Hydraulically swivel right/left ? 2x water tank ? Water spray ? Support wheels ? Support Manufactured with a stable, torsion-resistant housing with double-walled construction. The sweeping roller is suspended and adjustable in height, with stepless adjustment, and consists of disc brushes in plastic/wave wire, 600 mm Ø, with heavy-duty wheels 250 mm Ø directly attached to the housing. Working width: 2.4 m Overall width: 2.65 m Sweeper roller diameter: 600 mm Lifting device for front quick-change system: Implement plate size 3 or 5, including cylinder Drive, hydraulic, minimum oil flow at 180 bar: 40 l/min Weight: 580 kg Additionally with: Hydraulic tilting of the brush right/left Water spray device in front of the brush Boundary lights LED and warning flags Changeover valve, electric Financing is possible through our partner banks; we will gladly assist you. We expressly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. Information on accessories is without guarantee. Subject to change, prior sale, or errors. We strongly recommend and encourage an inspection and examination so that the buyer does not have any false expectations regarding the condition and suitability. Inspections and examinations are possible at any time by prior arrangement and are expressly desired.

Condition: used, Year of construction: 1979, weight 200 kg 931855500 Predpfx Aex U A Srsbuec

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 525 mm, GF AgieCharmilles Progress VP4 Year of manufacture: 2012 Travel paths: X = 800 mm, Y = 550 mm, Z = 525 mm Predpfx Aboyir N Ueusc Travel paths: U = 800 mm, V = 550 mm Maximum taper: 30° at 500 mm height Maximum workpiece dimensions: 1300 x 1000 x 510 mm Maximum workpiece weight: 3000 kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged-type wire EDM machine with automatic wire threading and re-threading after wire breakage Including automatic front door Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 2900 x 3050 x 2850 mm Net weight: 6000 kg The machine will be cleaned and fully overhauled after order confirmation. A 6-month warranty on all machine parts is included. Commissioning and training can also be offered on request.

Condition: used, Year of construction: 2002, Voltage: 400V / 50/60Hz / 3 phases Machining method: Immersion Maximum workpiece size: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table dimensions: 900x600 mm Distance from floor to table: 900 mm Total dielectric fluid volume: 1200 L Axes X, Y, Z, U and V Psdpfx Abeza U Nlsusrc Travel ranges X, Y, Z: 550 x 350 x 400 mm Travel ranges U, V: 550 x 350 mm Collision protection: Axes X, Y, U, V, Z Tapered cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (Option 0.1/0.2/0.3 mm) Wire guide type: Closed diamond guide, gap-free Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 kg (P5) Dielectric fluid Paper filter: 2 cartridges Dielectric fluid temperature: +/- 1°C Total volume of ion exchange resin: 20 L Maximum injection pressure: 20 bar Generator: Dual source Isopulse Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 microns Ra Measuring system: Glass scales Measuring resolution: 0.5 microns Servo motors: AC type All technical specifications are subject to change without notice; errors and omissions excepted. The machine was fully functional until it was dismantled. Warranty is excluded.

Condition: used, Year of construction: 2003, operating hours: 34,621 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 34621 Std Verfahrwege X 350 mm Prodpfx Aszkhltobujc Y 220 mm Z 220 mm U 350 mm V 220 mm Year 2003

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0044, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 256 mm, The machine was manufactured in 2011, but it was not put into operation and modernized until 2016. As part of this process, an electrical update for the WorkPartner automation system was carried out! TECHNICAL DETAILS Workpiece weight max.: 200 kg Travel range X-axis: 1,800 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 1,100 mm Workpiece height max.: 250 mm Workpiece width max.: 750 mm Workpiece length max.: 550 mm Feed length X-axis: 350 mm Pedpozf E Nxjfx Abuorc Feed length Y-axis: 250 mm Feed length Z-axis: 256 mm MACHINE DETAILS Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 3,000 x 3,760 x 2,455 mm Total weight: 3,700 kg EQUIPMENT Documentation/Manual Cooling unit Note: The operating hours of the machine can be found in the last image.

Condition: like new (used), Year of construction: 2025, Hot wire cutting system Prsdpfeznli Dsx Abusc Manufacturer: MANZ PLC control, touch screen display, Siemens

Condition: used, offer consists of: Prodpfx Abjw Ewzvsujc stitching wire unwinder for 15kg roll without wire We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: excellent (used), Winch rope, crane rope, lifting rope, wire rope, stainless steel rope, forestry winch rope, round strand rope -Manufacturer: TECI, crane rope, round strand rope Ø 9 mm -Rope type: 7x19 -Length: 58 m Prsdpev E H Srefx Abujc Quantity: 1 piece available -other crane ropes also available -Transport dimensions: Ø 300 x 220 mm / Ø 400 x 300 mm -Weight: 22 kg

Condition: excellent (used), Overall dimensions Length 4500 mm Width 1900 mm Height 1750 mm Feeder table height 860 mm Weight 1100 kg Workpiece dimensions Height 280 mm Width 300 mm Length from 500 to 3000 mm Power supply 400 V (3-phase) Feeder feed Variable, controlled by frequency inverter Feed speed 4-13 m/min Main belt feeder width 200 mm Pulley diameter 600 mm Saw blade parameters Length 4000 mm Prsdpfxew R E S Es Abusc Width 30 ÷ 42 mm Thickness up to 1.1 mm Workpiece hold-down spring-loaded Cutting thickness adjustment manual Hourly output up to 3 m³

Condition: excellent (used), Year of construction: 1989, Machinetype: barbed wire machine Make: VITARI Type: MFS Constr. year: 1989 line wire diameter: 1,6-2,8mm point wire diamter: 1,6-2,5 mm Podjw N D Suepfx Abusrc output – meter/min: 27-47 distance of barbs: 50-150mm Excellant condition

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: MIKA Seilzüge, 1x Demag DR wire rope hoist crane Due to numerous inquiries - Price is per unit! 5 units available, see listing below: 1x Demag wire rope hoist EKDR-Pro3 NL1600Kg/1.6t, serial number 96656002, 4M, hook path/lift 12m! – double reeved, year 2015 1x Demag wire rope hoist EKDR-3 NL1600Kg/1.6t, serial number 96656701, 2M, hook path/lift 12m! – double reeved, year 2015 1x Demag wire rope hoist EKDR-3 NL1000Kg/1.0t, serial number 96305549, 4M, hook path/lift 12m! – double reeved, year 2012 1x Demag wire rope hoist EKDR-3 NL1000Kg/1.0t, serial number 96305548, 4M, hook path/lift 12m! – double reeved, year 2012 1x Demag wire rope hoist EKDR-3 NL1600Kg/1.6t, serial number 96305550, 4M, hook path/lift 12m! – double reeved, year 2012 Each with 2 lifting speeds, lifting height 12m, trolley gauge adjustable Each hoist supplied with pendant control and power supply plug Pjdpfx Absy D D S Seuorc Total weight approx. 300 kg, connection to 400V 50Hz Very good condition, see photos Item location: 75053 Gondelsheim Shipping available, please inquire with your postal code

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 55DM2752, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 400 mm Travel range Z-axis: 310 mm Travel range U-axis: ±75 mm Travel range V-axis: ±75 mm Wire diameter: 0.1 - 0.3 mm Max. workpiece dimensions: 1,050 x 820 x 305 mm Max. workpiece weight: 1,500 kg Table dimensions: 840 x 560 mm Table design: U-shaped Pjdpfey I Uvcox Abusrc Taper angle: max. 15° Taper angle at workpiece height: max. 260 mm MACHINE DETAILS Dielectric tank Tank capacity: 860 l Filtered particle size: 3 µm Water purifier: 10 l Dry weight: 350 kg General power supply: 13.5 kVA Air pressure: 0.5 - 0.7 MPa Air consumption: 75 l/min or more Dimensions & Weight Dimensions (W x H): 2,022 x 2,150 mm Weight: 3,500 kg

Condition: excellent (used), Year of construction: 2016, X-axis: 550 mm Podpfx Abezcpifjuorc Y-axis: 350 mm Z-axis: 400 mm Max. workpiece dimensions: 1,200 x 700 x 400 mm Max. workpiece weight: 1,500 kg Machine weight: 2,850 kg Cutting range: 30 degrees on 400 mm Includes operating manual. Machine can be inspected while powered on.

Year of construction: 2014, condition: good (used), DT250 Slitter / Rewinder Year of manufacture: 2014 Machine type: Tabletop slitter rewinder for narrow web label materials Condition: Used – in good working condition Technical Data Maximum web width: 254 mm Prodpfxoyt H R Io Abusc Maximum unwind diameter: 450 mm Maximum rewind diameter: 360 mm Rewind shafts: 2 × 76 mm 1 × 40 mm Slitting system: Rotary shear slitting with knife holders Accessories and Tooling Spare slitting knives included Core adapters included Machine Dimensions Length: approx. 1300 mm Depth: approx. 700 mm Height: approx. 600 mm Application The Daco DT250 is designed for finishing self-adhesive label materials and is ideally suited for digital label production environments such as HP Indigo, Konica Minolta AccurioLabel, Xeikon, and similar presses. Typical applications include: - Slitting wide master rolls into multiple narrow label rolls - Rewinding and roll inspection - Production of finished label rolls for customers - Converting digital label print jobs into finished products Advantages of this Machine - Compact and space-saving tabletop design - Ideal for small and medium-sized label converters - Reliable and user-friendly operation - Suitable for a wide range of self-adhesive label materials - Cost-effective finishing solution for digital label production

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, AGIECHARMILLES CUT 2000 AWC WIRE EDM MACHINE (DOUBLE HEAD) MANUFACTURED IN 2012 TRAVEL: X 350, Y 250, Z 256, U, V +- 70 MM MAXIMUM TAPER: 30º/100 MM LINEAR GUIDES AUTOMATIC THREADING AND RE-THREADING DOUBLE HEAD OPTION TO WORK WITH 0.05 AND 0.07 MM WIRES ACCEPTABLE WIRE RANGE: 0.05 - 0.33 MM AGIEVISION 5 GENERATOR SUPERFINISH MODULE FOR FINISHES UP TO 0.05Ra Pedpfx Asy Twkaebusrc RE-THREADING HEIGHT: 220 MM COILS UP TO 8 KG WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3769, total width: 1,667 mm, roll diameter: 1,067 mm, overall weight: 1,360 kg, product width (max.): 1,067 mm, input voltage: 460 V, ROTARY SHEAR SLITTING STATION: The rotary shear slitting station is a modular design allowing detachment from the main frame. The powered 60mm (2.367 inch) diameter upper and lower knife shafts drive the male and female shear knife assemblies. The male and female shear knife assemblies may be positioned anywhere within the web area and are held in position by eccentric locking keys. The removable male shear knife shaft assembly is mounted to a rigid dovetail bar assembly. The dovetail bar assembly is adjustable axially for shear knife face contact pressure and rotationally for knife overlap. A two-position lock lever assembly is used to rotate the dovetail bar assembly 900to the open position for removal of knife shaft assembly or closed in the slitting position. Rotary shear drive speed is proportional to web speed or manually controlled by the operator. REWIND: The slit web is alternately rewound on the duplex air expanding rewind shafts. Flange mounted rewind shafts provide ease of change to other desired types or diameters. The outboard rewind support swings open for removal of finished rolls from the cantilevered rewind shafts. Pjdpsy Ufgxofx Abuerc

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 331965, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, wire diameter (max.): 0.25 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 250 mm Z-axis travel: 200 mm Prsdpfoyz Rxasx Abusc (U/V) axis travel: 400 x 250 mm Taper angle: +/- 30° at 200 mm height Workpiece weight: 500 kg Workpiece height (max): 200 mm Workpiece width (max): 500 mm Workpiece length (max): 850 mm MACHINE DETAILS Standard wire guides: 0.25 mm Dimensions & weight Dimensions (L x W x H): 1,800 x 1,600 x 2,180 mm Machine weight: 2,190 kg Injection pressure upper nozzle: 0 - 11.5 bar Injection pressure lower nozzle: 0 - 11.5 bar

Condition: good (used), functionality: fully functional, Year of construction: 1980, lifting height: 7,000 mm, load capacity: 3,200 kg, 2 identical DEMAG electric hoists P416 H7, year of manufacture 1980 All spare parts for P-Zug available as well Reeving 2/1 Prjdpfx Aoyyum Eebusc Load capacity 3.2 t Hook path 7 m Main lifting speed 8 m/min Precision lifting speed 0.8 m/min