Used Wood Dryer Frequency for sale (12,025)

Condition: used, Year of construction: 1998, machine/vehicle number: 71257/1, - Producer Cefla/Sorbini - Type Ecolight - Year of construction 1998 - Working width 1,300 mm - working height 870 + - 20 mm - max. part height ~ 70 mm - Number of tubes from above 1 pc. - Tubes placed straight 1 pc. - Suitable for mercury tubes - Suitable for gallium tubes Bledpfx Aaeumvp Eo Njd - Bar transport - Rod pitch ~ 95 mm - Feed adjustable 5 - 25 m/min - Length 1,500 mm + 500 mm - Volt,Hz 400 /50 - Total electrical connection 12.56 kW - Voltage fluctuations max. +/- 5 %

Condition: used, Year of construction: 2012, - Manufacturer Venjakob - Year of construction 2012 - Working width 1.300mm Bledeu Edhuepfx Aa Ned - Type. Flash off dryer, VEN DRY Flash Off - Part height max. approx. 120mm - Zone1, paint calming zone with cover hood without air 3,000+300mm - Zone2, flash off zone 10,000mm - Laminar flow dryer in the opposite direction to the parts - Supply air 4,000m³/h - Exhaust air 4.000m³/h - Air volumes adjustable via flaps - Heat output approx. 65 kW - Air speed 2-5m/s - Max. Drying temperature 30°C - Heat exchanger, heating water PWW max. 90/70 degrees - Belt conveyor, length 13,800 mm - Feed speed approx. 2-10m/min, Frequency converter required on site. - Volt, Hz 400 / 50 - Motor power 2.5+1.5+0.75KW - Without switch cabinet - Location, at the Blomberg warehouse

Condition: used, for installation on an existing bar conveyor. Bljdoumvqcopfx Aa Nod Includes: casing with 2 tubes, exhaust fan and control cabinet. Without conveyor

Condition: used, Year of construction: 2008, - Manufacturer Efsen/Cefla - Type Woodcure 1400 - Year of manufacture UV 2008, transport/conveyor 1998 - Working width 1,300 mm (1,445) mm - Working height 870 + - 20 mm - Max. part height 70 mm Blodpfx Aaevupdcj Nod - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Tube power 120 W/cm - Suitable for mercury tubes - Suitable for gallium tubes - Manufacturer of transport system Cefla - With cross bar conveyor - Bar spacing 95 mm - Feed adjustable via hand wheel ~ 5-25 m/min - Installation length: 3,500 mm - Width: approx. 2,100 mm - Volts, Hz 400 /50 - Total electrical connection 38 kW - Voltage fluctuations max. +/- 5%

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor Bledpfxsu S N R Ee Aa Ned - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: used, Year of construction: 2007, UV Dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445 mm) Bjdpfx Aasxn Nlvj Nsld - Working height: 900 +/- 40 mm - Operator side: right - Max. part height: 70 mm - Number of top lamps: 2 pcs. - Lamps, vertically aligned: 2 pcs. - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power, max.: 120 W/cm - Conveyor type: rod transport - Length: 2,500 mm - Width: 2,300 mm - Height: 1,500 mm - Voltage, Hz: 400 V / 50 Hz - Total electrical connection: 86 A / 36.4 kW - Voltage fluctuations max.: +/- 5% Images are for reference only and show a similar machine.*

Condition: used, Year of construction: 2008, - Producer Printworld - Type PUVD 1600-2 - Year of construction 2008 - Working width 1.600 mm - Working height 1.030-1.050 mm - Max. part height 25 mm - Operationside left - Number of lamp from top 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 120 W/cm Blsdpfx Aeumvkcja Nsd - Selective shiftable 60 / 90 / 120 W/cm - Conveyor with netbelt - Feed speed adjustable 2 - 50 m/min - Installation length 3.300 mm - Machine measure 3,3 x 2,5 x 1,8 m - Location - Voltage / HZ 400 / 50

Condition: used, Year of construction: 2016, machine/vehicle number: 9960-10-1059, techncal data: - Producer: Printworld - Type. 3D - PUVD 1300 - Working width: max. 1.300 mm - UV-lamp length: 2 x 1.600 mm arc length - Curing systems: 2 pcs of curing systems from top + 1 pcs curing system from down under - UV- power regulation: UV- lamps are able to be individually controlled (30% -100%) - Reflector: Printworld Multifocal –Reflector - Conveyor transport width: 1.400 mm - Total lengths: 4,5 m - Conveyor speed: 3 – 20 m/min - Substrate passage height: 60 mm, max. (option higher) - Execution conveyor belt: PTFE Fiberglass mesh conveyor belt, anti-static coated - Conveyor speed regulation: Infinitely variable with digital control and monitoring - Conveyor adjustment: Conveyor belt guiding system - Conveyor belt drive: Stepper motor with variable speed conveyor belt and digital Bsdpfsu Abn Tox Aa Njld - control and monitoring - UV radiation protection: Built in on the machine frame - Energy Saving: Automatic standby circuit with power reduction about 10% - Operation / control: Schneider Modicon M258 Logic Controller processor with Magelis colour touch screen - Inlet height: 850 – 900 mm or by appointment) - Outlet height: 850 – 900 mm (or by appointment) - Electrical connection: 400V~, 50 Hz, 3- Phases +N +PE - Current 135A - Location: on stock

Condition: used, Year of construction: 2013, machine/vehicle number: A1312006-0030, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Length of exhaust duct 3,800 mm - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h - Max. Drying temperature ~ 30 degrees - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. Bodpfx Aasxfkbao Njld - IR heater output 12 x 1.5 kW - Belt conveyor, length 4.000 mm - Location, at the warehouse - El. Power 20KW / 63A - Volt, Hz 400/50 - Voltage fluctuations max. +/- 5 % - Control cabinet with touch screen display

Condition: good (used), Year of construction: 1999, Refrigeration Dryer Manufacturer: KAESER Model: TE 121 Year of manufacture: 1999 Rated motor power: 2.1 kW Maintenance carried out by Kaeser. Bodpjttwzbjfx Aa Nold

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NR810NEU, total length: 1,415 mm, sweeping width: 810 mm, empty load weight: 465 kg, construction height: 1,120 mm, drive type: Lithium-Ionen, construction width: 890 mm, Scrubber Dryer Chassis number: NR810NEW Condition: New machine Technical condition: New Front tyre condition: New Rear tyre condition: New Battery voltage: 24V Battery capacity: 205Ah Battery type: Lithium-ion Bedpeym Hbgefx Aa Nsld Battery year: 2025 Battery condition: New Description: - Efficient cleaning performance of 4,860 m² per hour. - Compact size with a low center of gravity, small turning radius, and flexible operation. - Integrated waterproof touch panel design; the LCD displays operating parameters and error codes, making parameter adjustment and fault diagnosis easier. - Three speed levels and adjustable water flow. - In-house developed controller with motor overload protection and low battery safeguarding functions, effectively extending motor and battery life. - An ECO mode reduces the vacuum motor’s output and noise level, ideal for noise-sensitive environments. - Electric one-touch lifting function for brush and squeegee holders; automatic squeegee lift during reverse driving for safety and efficiency. - Dual brush/pad design with innovative connection for easy brush or pad loading and unloading. - 120-liter fresh and wastewater tank capacity, reducing refill and emptying frequency. Automatic alarm for empty fresh water tank or full waste water tank. - Large opening on the removable waste water tank; tool-free design facilitates easy cleaning and maintenance. - Seat equipped with safety switch, causing the machine to automatically stop if the operator leaves the seat. - Non-slip, durable tyres provide secure grip and optimal traction even on smooth or wet floors.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NR1060NEU, total length: 1,800 mm, sweeping width: 1,060 mm, empty load weight: 477 kg, construction height: 1,350 mm, drive type: Lithium-Ionen, construction width: 1,150 mm, Scrubber Dryer Chassis Number: NR1060NEW Condition: New machine Technical Condition: New Front Tyres Condition: New Rear Tyres Condition: New Battery Voltage: 36V Battery Capacity: 205Ah Battery Type: Lithium-ion Battery Year of Manufacture: 2025 Battery Condition: New Description: The NR1060 is a medium to large, front-wheel-drive scrubber dryer with dual brushes. - Delivers an efficient cleaning performance of 6,890 m² per hour. - The coarse dirt container in the recovery tank effectively filters large debris to prevent drain blockages. - The entire machine is built with a modular and compact design, offering high maneuverability and flexibility. - The low center of gravity of the water tank and battery ensures high driving safety and easy maintenance. - Integrated waterproof touch panel design for simple operation, e.g., driving speed, water flow adjustment, and brush lifting/lowering. - Large LCD display shows machine settings, facilitating fault diagnosis and maintenance. - Standard electronic water level indicators for both clean and recovery tanks with intuitive and user-friendly displays. Automatic alarm and shutoff when the recovery tank is full. - One-touch soft start for the motor with overcurrent and undervoltage protection for the control electronics. - Patented quick-release disc brush system enables automatic loading and unloading of brushes with the press of a single button. - ECO mode reduces energy consumption and noise levels, ideal for low-noise work environments. - Operating time: 5–6 hours per charge. - Non-slip, durable tyres for secure grip and optimal traction, even on smooth or wet floors. Bsdpfx Asym Hbaoa Nold

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ANB510NEU, total length: 1,030 mm, sweeping width: 580 mm, empty load weight: 220 kg, fuel type: electric, construction height: 1,045 mm, drive type: Elektro, construction width: 580 mm, Scrubber Dryer Chassis Number: ANB510NEU Condition: New Technical Condition: New Front Tyre Type: Polyurethane Front Tyre Condition: New Rear Tyre Type: Polyurethane Rear Tyre Condition: New Battery Voltage: 24V Battery Capacity: 120Ah Battery Type: Lithium-ion Battery Year: 2025 Battery Condition: New Bljdpfx Aaeym Ha No Nsd Description: - Theoretical cleaning performance: 2,570 m² per hour - AI-based scrubber dryer robot for commercial areas - Autonomous navigation with advanced 3D LiDAR technology - Powerful NVIDIA Xavier AI edge computing chip for intelligent route planning and environment adaptation - High level of safety with 360° sensor technology - Robust, durable construction - Low-maintenance and updatable via OTA without technician

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: imopXLPlusNEU, total length: 351 mm, sweeping width: 460 mm, empty load weight: 27 kg, fuel type: electric, construction height: 1,199 mm, drive type: Elektro, construction width: 480 mm, Scrubber dryer machine Chassis number: imopXLPlusNEU Blsdpfsym E U Sjx Aa Nsd Condition: New unit Technical condition: New Front tyre condition: New Rear tyre condition: New Battery voltage: 24V Battery capacity: 9Ah Battery type: Lithium-ion Battery year of manufacture: 2025 Battery condition: New Description: - Productivity (per hour) theoretical max: 1,800 sqm - Battery runtime (100% charge), max. operating time in min.: 85 - Battery charging time (100% charge) – max. time in hours: 5 - The machine is offered including battery and suitable charger

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: imopLiteNEU, total length: 340 mm, sweeping width: 368 mm, empty load weight: 17 kg, fuel type: electric, construction height: 1,200 mm, drive type: Elektro, construction width: 430 mm, Scrubber dryer Chassis number: imopLiteNEU Condition: New device Technical condition: New Front tyres condition: New Rear tyres condition: New Battery voltage: 18V Battery capacity: 12Ah Battery type: Lithium-ion Battery year of manufacture: 2025 Battery condition: New Description: - Productivity (per hour), theoretical max: 1,400 sqm - Battery runtime (100% charge), max. runtime in min.: 70 - Battery charging time (100% charge), max. charging time in hrs: 3.5 - The device is offered including battery and matching charger. Bodpfxjym E Uxe Aa Nold

Condition: used, axle configuration: 3 axles, first registration: 02/2018, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 9,010 mm, color: other, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Payload: 31,920 kg, Unladen weight: 7,080 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, ABS, EBS, Body year: 2018, Sliding roof, Axle type: BPW, BPW HARD WOOD FLOOR = Further Information = General Information Cab: Day cab Registration number: OV-46-NZ Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 5 mm; Tyre tread right: 5 mm Axle 2: Tyre tread left: 6 mm; Tyre tread right: 7 mm Axle 3: Tyre tread left: 6 mm; Tyre tread right: 6 mm Weights Kerb weight: 7,080 kg Payload: 31,920 kg Gross Vehicle Weight (GVW): 39,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 0 Maintenance APK (Technical Inspection): Valid until 12/2026 Condition General condition: Average Technical condition: Average Optical condition: Average Damages: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, models, and price classes. Why buy from Kleyn Trucks? Simple! Bsdpjyhl Rcefx Aa Nold • Large and fast-changing inventory • Recognizable quality • Competitive pricing • Professional service • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates prepared quickly • Expert technical services • The security of “recognizable quality” • And more… Please visit our website for special offers and our complete stock: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and send an enquiry via our website. Ask directly about our European warranty package.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 10071775, center height: 150 mm, overall weight: 100 kg, rotational speed (max.): 3,300 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Speed: from 400 to 3,300 rpm Blsdpfx Ajyn Hz Noa Njd Distance between centers: approx. 400 mm Center height: approx. 150 mm MACHINE DETAILS Operating voltage: 230 V Frequency: 50 Hz Rated current: 2.5 A Connected load: 0.56 kW Dimensions & Weight Dimensions (L x W x H): 850 x 300 x 440 mm Weight: 100 kg External reference: Training workshop – Lot 3

Condition: like new (used), Year of construction: 2020, We offer this second hand IWT Moldrup-SPP Hydro-Thermal Treatment Plant Bljdpfx Ajymxqaoa Ned Industrial MOLDRUP-SPP plant designed for hydro-thermal modification of timber up to 2,600 mm diameter and 12,000 mm length. Built in heavy-duty stainless steel and engineered for continuous industrial production with fully automatic PLC control. Industrial Hydro-Thermal Wood Modification Plant – Ø2,600 x 12,000 mm Industrial hydro-thermal treatment plant designed for efficient and uniform thermal modification of timber in a controlled oxygen-free environment. The plant is built around a heavy-duty Ø2,600 mm × 12,000 mm stainless steel autoclave, handling approximately 15–22 m³ of timber per charge, with operating pressure up to 12 bar (abs). Fully automated via PLC, the system enables precise control of vacuum, pressure, temperature and multi-phase process cycles. The integrated vacuum system ensures safe oxygen removal, while the thermal oil heating system provides accurate temperature management throughout the treatment process. The complete installation includes pressure vessel, heating system, vacuum pump, circulation fan, condensate handling, trolley loading system and safety equipment. Thermal oil boiler skid and emission control equipment are included. Technical documentation available on request. The complete hydro-thermal wood treatment plant is sold as seen / as is. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2021, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Montech, belt conveyor type TB30-185M with adjustable guide rails -Speed: frequency-controlled 38.3 - 51.1 m/min -Drive: Oriental Motor 120W, see photo of the nameplate -Voltage: 0-240V / 0-333Hz -Belt width: 155 mm -Conveyor length: 460 mm -Transport dimensions: 460/345/H200 mm -Weight: 11 kg Bledpfx Aoyh Uvlja Njd

Condition: used, 6-axis AC servo drive, servo controller, servo inverter, servo amplifier, servo regulator, frequency converter, drive controller for robots FANUC type A06B-6105-H003 No. V07Z08282 NEW / unused Input voltage: 200 - 240 VAC Rated power: 1.5 kW Number of axis outputs: 6 Output current: 6 x 13 A Total output current: max. 78 A Manual No.: B-81465 Standard: EN50178 Installed PCBs: A16B-2000-0063/07D, A16B-3200-0440/05C Bljdpfx Aajkpwu Re Nod - Plexiglass cover not included in delivery Dimensions (W x H x D): 70 x 170 x 380 mm Weight: 16.5 kg As new / unused in opened original box from stock liquidation

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Bledpfx Asdzqn Usa Nod Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Condition: used, Static frequency inverter Manufacturer: GARBE LAHMEYER & Co. AG Type SU3760.2aFZ231 Year of manufacture: 1989 Make No.: A2K 60229 0001 Rated power 500 kVA Type of current D Mains voltage 380 Volt Input frequency 50 Hz Input current 760 Amp. Type power input 760 Amp. Output voltage 380 Volt Output frequency 50 Hz Output current 760 Amp. Type power output 760 Amp. - Control unit GARBE LAHMEYER type AEB 60 Cabinet dimensions (W x H x D) 2250 x 800/900 x 2550 mm Bodpohutxzofx Aa Njld Transport dimension (W x H x D) 2430 x 1100 x 2700 mm Weight 1660 kg

Condition: used, MF welding machine with water-cooled spotter Medium frequency spotter Manufacturer: TECNA (Italy) Type 3670 E CF00 Serial no.: Year of construction 2014 Rated welding power 25 kVA Max. welding power 160 kVA Power supply 400 Volt, 50 Hz - Welding controller TE750 or TE760 - Spotter for single-sided spot welds Bsdeg U A Uzepfx Aa Nold - Ideal for bodywork repair with excellent weld quality - Water-cooled type 2BHPLN - Mobile transport trolley Weight approx. 155 kg Very good condition - as new

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1600x330x420 mm Weight 130 kg Bodpfx Aajv A Hwis Neld Total power requirement 1,1 kw

Condition: new, Year of construction: 2023, overall weight: 33 kg, Unused, still in packaging SINAMICS G120 POWER MODULE PM240-2 WITH BUILT IN CL. A FILTER WITH BUILT IN BRAKING CHOPPER 3AC380-480V +10/-20% 47-63HZ OUTPUT HIGH OVERLOAD: 37KW FOR 200% 3S,150% 57S,100% 240S AMBIENT TEMP -20 TO +50 DEG C (HO) OUTPUT LOW OVERLOAD: 45kW FOR 150% 3S,110% 57S,100% 240S AMBIENT TEMP -20 TO +40 DEG C (LO) 551 X 275 X 237 (HXWXD), FSE PROTECTION IP20 WITHOUT CONTROL UNIT AND PANEL APPROVED FOR CU FIRMWARE- VERSION V4.7 HF8 Bodpfev Eu D Asx Aa Neld (Currently 9 on stock)