Used Wood Packaging for sale (26,156)

Condition: excellent (used), Year of construction: 2017, Weima Wood Shredder - Walking Floor Shredder - Low-Noise and Slow-Running Top condition - only 150 operating hours - Type: WL 600 Shaft diameter (mm): 260 Knife length (mm): 600 Knife shaft speed (rpm): 80 - 125 Number of knives (pcs): 14 Max. granulate size (mm): 20/25 Opening (mm): 600 x 800 Extraction port diameter (mm): 160 Motor power (kW): 15 Voltage (V): 400 Working height (mm): 1645 L x W x H (mm): 1,805 x 1,118 x 1,645 Weight (kg): 1,100 Location: ex-stock 54634 Bitburg - available immediately - Hsdpfx Aboxiq Sye Uefr Subject to prior sale

Year of construction: 2022, condition: like new (used), Agilent Model: G9800A For sale is an Agilent Cary Eclipse Fluorescence Spectrophotometer – unused in original packaging (without software). As far as is known, the item was never used and is in like-new condition. The original packaging is available and may show slight storage marks. Year of manufacture: 11/2022 Agilent Technologies Cary Eclipse Fluorescence Spectrophotometer Description: Hfedpfx Aewp Embeb Ujr The Cary Eclipse G9800A is a high-quality fluorescence spectrophotometer for research, laboratory, and industrial use. It offers exceptional sensitivity, speed, and ease of use and is ideally suited for applications in the fields of biochemistry, pharmacy, environmental analysis, and materials research. Technical data: Light source: Xenon flash lamp Wavelength range: 200–900 nm Measurement modes: Emission and excitation spectra Time-resolved fluorescence Phosphorescence Excitation-emission matrix (3D scan) Software: Cary Eclipse Software (not included) Detector: Highly sensitive photomultiplier (PMT) Scan speed: Very fast (up to 80 nm/s) Typical applications: Analysis of proteins, DNA, enzymes Detection of environmental contaminants such as PAHs Fluorescent dyes & markers Development of pharmaceutical agents Manufacturer: Agilent Technologies (formerly Varian) Model: G9800A – Cary Eclipse Fluorescence Spectrophotometer Includes: Device, power cable, manual Power supply / connection data: Power connection: IEC C14 socket (classic cold appliance plug, as used in PCs) → Connection via standard cold appliance cable Mains voltage: 100–240 V AC, 50/60 Hz (automatic switching) Power consumption: Approx. 150–200 W (depending on operating mode) Fuse: Internally installed, typically T2A or T3.15A Weight: approx. 28–32 kg Scope of delivery: (See picture) (Changes and errors in the technical data reserved!) For further questions, we are happy to answer by phone.

Year of construction: 2012, condition: used, Ratiostretch RS10/2 RA1978 Height: 2540 mm Width: 1650 mm Turntable diameter: 1650 mm Length: 2600 mm maximum rewindable product weight:2000 kg maximum wrappable product height: 2330 mm maximum wrappable product basic dimensions 1100x1200 mm Turntable speed: 12 rpm (max.) / 3 rpm (min.) Lifting carriage speed: 4 m/min (max.) / 0.6 m/min (min.) Turntable height: 85 mm Voltage: 230V, 50Hz, 6A Year of manufacture 2012 weight: 480 kg Foil width: 450-500 mm Foil diameter: 240 mm Roll weight: up to 20 kg Foil thickness: from 7 µm Current mounting: embedded in floor, optional drive-on ramp available Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We are looking forward to hearing from you. With kind regards Hjdpfok Abplsx Ab Uefr Your team of Dr. Sonntag GmbH & Co. KG

Condition: ready for operation (used), -packet-jointing line -for timber infeed 900-5.100 mm -double-roller conveyor -cut saw with marking recognition 15 KW -packaged -finger jointing milling automate 80 KW -singling cross conveyor -roller conveyor -cycle press hydraulic 20 KW -automatic under table circular saw 5 KW -wood widths of 70 - 255 mm -wood thickness from 22 to 140 mm -wood input from 900 to 5100 mm -pressing force 12 tons -capacity from 7.000 to 10.000 meters / 8 h -options example cycle press 25 to or 40 to Hsdpfx Aebqqzgsb Ujfr

Condition: good (used), axle configuration: 3 axles, first registration: 03/1997, suspension: air, color: white, Year of construction: 1997, Equipment: ABS, Make axles: SAF Brakes: drum brakes Suspension: air suspension Hjdpswb Smxsfx Ab Uofr GVW: 39.000 kg Technical condition: good Visual appearance: good

Condition: good (used), Year of construction: 2022, Type of fuel: Petrol Empty weight: 1.450 kg Technical condition: good Visual appearance: good Water tank volume: 30 l Transport dimensions (LxWxH): 0,267x0,118x0,239 Please contact Christian Theißen for more information Manufacturer: Först Model: TR6D Year of build: 2022 Condition: Used Hsdpfxsxgp H Do Ab Uefr Data: Roller diameter: 150 x 200 mm Total dimensions LxWxH: 2,67 x 1,18 x 2,39 m Drive type: Benzin, 31,3 kW/ 42 PS Dimensions funnel WxD: 3405 x 2627 mm Hopper loading height: 2295 mm Engine: Doosan Tank volume: 30 Liter l Weight: 1.450 kg Special features: Caterpillar shredder with chain drive. Feed roller system: FörstGrip, flywheel system: top open flywheel (640x25 mm) Two 8" knives, no-stress system: Auto Intelligence, feed system: Auto Intelligence, fully water and vibration-proof touchpads. Noise level: Lwa 121dB. Price on demand Location: 41468 Neuss: immediately available

Condition: excellent (used), CATALOG NUMBER 7176 TECHNICAL DATA - Loading hopper inlet: 1050x600mm - Outlet for shredded wood: 160mm diameter - Rotor working width: 590mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 14 pcs - Knife size: 30x30mm - Screen: 10x12mm - Pressing drawer - Electric auto-reverse - Dimensions (LxWxH): 1900x1200x1530mm - Weight: 990kg ADVANTAGES – Auto-reverse – German manufacturing – Unpainted – Like WEIMA WL4 – Pressing drawer – Very good condition Hfjdpfx Abjp R I Nlo Uer – Used shredder Net price: 48,900 PLN Net price: 11,640 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2022, Robopac Model Robot M80 FRD PLUS, Year of manufacture: 2022 For sale is a high-quality self-propelled stretch wrapping machine from Robopac, Model Robot M80 FRD PLUS. The machine is fully operational, ready for immediate use, and ideal for wrapping palletized goods – with no need for a fixed installation site. Its mobile design enables efficient securing of even large and bulky loads. Technical data: Model: Robot M80 FRD PLUS Power supply: 100–240 V / 50–60 Hz / 1 phase Power consumption: 0.3 kW Current consumption: 1.7 A Film carriage: FRD – manual film tension Max. pallet height: up to 2,400 mm Battery: 2 × 12 V – sufficient for up to 150 pallets per charge cycle Operation: Intuitive display with adjustable programs Hfodpjw Eaqtsfx Ab Uer Special features: Fully mobile – no fixed wrapping station required Ideal for logistics, warehousing, production, or shipping Very easy to operate – suitable for untrained personnel Collection & Shipping: Shipping on pallet possible (costs on request) Inspection possible by appointment at any time! Scope of delivery: Robopac Robot M80 FRD PLUS Integrated battery Charging cable / power connector Machine weight: approx. 292 kg Condition: used Scope of delivery: (see picture) (Specifications and details are subject to change and error!) If you have any further questions, feel free to contact us by phone.

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Hfsdpfx Asx A Dfmob Ujr

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, power: 200 kW (271.92 HP), Boost your waste wood processing efficiency with this Komptech CRAMBO 5200 E direct, a robust industrial shredder renowned for its high throughput and reliability. Manufactured in 2016 and in used condition, this model features a powerful electric drive, delivering consistent performance with low operating costs and noise levels. The integrated Multistar 2-SE star screen ensures precise material separation, complemented by a swivel conveyor and overband magnet for enhanced sorting and metal removal. Complete with control cabinets, this shredder is ideal for operations seeking advanced processing capabilities and maximum productivity. Don’t miss the opportunity to upgrade your plant with this proven solution from Komptech. Hjdpfxoxv Acqj Ab Uofr

Condition: good (used), axle configuration: 3 axles, first registration: 07/1997, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, suspension: air, color: brown, Year of construction: 1997, Equipment: tail-lift, Axle configuration Make axles: BPW Hfodpsu N Hrqsfx Ab Uor Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle Weights Empty weight: 8.990 kg Carrying capacity: 30.010 kg GVW: 39.000 kg Functional Tail lift: DHOLLANDIA DHSMR, slider lift, 2000 kg Condition Technical condition: good Visual appearance: good

Condition: excellent (used), Year of construction: 2010, Automatic technological line for sawing wood Technical data: - Max wood diameter 400 mm - Minimum wood diameter 120 mm - minimum timber length 1500 mm - Max log length 3200 mm CAPACITY UP TO 200 m3 per shift The machine consists of the following elements: - Log loader - Sawmill longitudinal feeder - Sawmill TT 5/600/400 G - Motors 75 + 90 kW - Receiving roller table with ejecting mechanism for edgings and side boards - Driven roller table - Base table SB 4000 - Multi-saw WP 210 - 2 x 75kW engines Hsdpolar Riofx Ab Uefr - Receiving table - Lower return conveyor of edgings, waste to the chipper The machine is in good condition, in continuous operation - the possibility of viewing during operation

Condition: excellent (used), CATALOG NUMBER 7102 TECHNICAL DATA - Infeed width: 400mm Hfsdpfenwmr Ujx Ab Uer - Infeed height: 180mm - Shaft width: 430mm - Shaft diameter: 430mm - Knife length: 430mm - Number of knives: 2 pcs - Screen dimensions: 18x18mm - Bottom toothed feed shaft - Lower shaft motor: 0.75kW - Top toothed feed shaft - Upper shaft motor: 0.75kW - Belt feeder - Feeder belt length: 3260mm - Feeder belt width: 400mm - Main motor: 38kW - Autoreverse - Extraction port diameter: 250mm - Overall dimensions (L/W/H): 5200x1400x1870mm, weight: 2020kg – German manufacture – Autoreverse (adjustable) – Used chipper, in very good condition Net price: 63,900 PLN Net price: 15,200 EUR (based on exchange rate 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), Coating and packaging line with thermo-shrinkable film, consisting of: a) Double conveyor belt (mm 3000 x mm 1100) for application of corner protections. Hfedjgp Diajpfx Ab Uer - Adjustable feeding speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt - Total length of the machine (with motorised belt) mm 7600 approx. - Reel holder (6 upper reels max width mm 2450 + 6 lower reels max width mm 1450) - Slitter and transversal welding machine (mm 2500) - Max useful height mm 700 - Installed power KW 12 - With automatic device to pack light pieces (from 1 to 5 Kg) by welding bar c) Shrinking tunnel total length about 4700 mm (of which about 3700 mm are of the tunnel) with hot air circulation (heating by electric resistances and fan), total installed power KW ? - conveyor with metal rods (width mm 1500 approx.) - Max useful height mm 700 - Adjustable feed speed from 4 to 20 m/min d) Outlet roller conveyor "ELME" (idle rollers) for cooling (mm 3000 x 1500 ca.)

Year of construction: 2013, condition: new, wood baking oven with direct heating Hfjdpfsygm Uex Ab Ujr baking area 1,0 x 0,7 x 0,25 m (L x W xH) 8cm heatingstones also available with fully automatic pelletfiring system

Condition: used, mileage: 813,285 km, power: 199 kW (270.56 HP), first registration: 04/2007, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 5,730 mm, fuel: diesel, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel, loading space length: 7,400 mm, loading space width: 2,450 mm, loading space height: 2,640 mm, Year of construction: 2007, Equipment: ABS, air conditioning, cruise control, tail-lift, traction control, = Additional Options and Equipment = - Digital tachograph - Electric windows - Electric mirrors - Tachograph (control device) - Short cab - Tail lift = Remarks = Number of axles: 2, Configuration: 4x2, Gross weight: 19,000 kg, Total fuel tank capacity: 300 litres, Suspension type: air suspension, Cab type: short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Colour: Red, Heated mirrors, Lighting type: Halogen, Speed limiter, Air conditioning, Engine power: 199 kW (267 hp), Fuel: Diesel, Euro standard: Euro 4, Gearbox type: Opti-cruise, Transmission: Scania, Speed limiter, Gears: 12, Clutch pedal, Power steering, ABS, ASR, Starter battery, Seat arrangement: 1+1, Seat material: Fabric, Seat adjustment: Manual, Tail lift, Tail lift type: rear tailgate, Tail lift capacity: 2000 kg, Tail lift manufacturer: DHOLLANDIA DHLSU11, Tail lift material: Steel, Tail lift dimensions: 175 x 252, Spare wheel, Spare wheel tread depth: 6 % = Further Information = Transmission Transmission: SCA, 12-speed, automatic Hedpfxjww T Hlo Ab Usfr Axle Configuration Tyre size: 315/70R22.5 Brakes: drum brakes Suspension: leaf suspension Axle 1: Tyre profile left: 5 mm; Tyre profile right: 1 mm Axle 2: Twin tyres; Tyre profile left inside: 1 mm; Tyre profile left outside: 5 mm; Tyre profile right inside: 1 mm; Tyre profile right outside: 5 mm Dimensions and Weights gross vehicle weight: 19,000 kg Dimensions (L x W x H): 990 x 255 x 395 cm Functional Tail lift: DHOLLANDIA DHLSU11, rear tailgate, 2000 kg Load floor height: 113 cm Condition General condition: average Technical condition: average Visual condition: average Damages: none Number of keys: 1 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can select from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, years of manufacture, and price categories. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Recognisable quality • Competitive pricing • Professional commercial conduct • Multilingual service • Customer-focused approach • Assistance with import and transport • (Export) registration plates issued quickly • Skilled technical services • The security of 'recognisable quality' • And much more… Please visit our website for special offers and the complete inventory: Leasing with Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send a request via our website. Ask directly about our European warranty packages.

Condition: good (used), axle configuration: 3 axles, first registration: 03/1997, suspension: air, color: white, Year of construction: 1997, Equipment: ABS, Make axles: SAF Brakes: drum brakes Suspension: air suspension Hsdpfx Aswb Smfsb Uefr GVW: 39.000 kg Technical condition: good Visual appearance: good

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, power: 18.5 kW (25.15 HP), color: blue, Shredder Type GAZ 62 with G-Rotor Factory-refurbished, new wear parts Feed opening: 620 x 820 mm Hopper capacity: 0.65 m³ Rotor diameter: 248 mm Rotor working width: 600 mm Rotor speed: 80 rpm Cutting system: Spiral rotor; 26 knives, 30 x 30 mm Screen perforation: 10 mm or as required Control cabinet: completely wired, incl. 5 m cable Motor power: 18.5 kW Hydraulic motor: 0.75 kW Connected load: 400 V +/- 5% / 50 Hz Extraction port diameter: 160 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Including: - Automatic star-delta start - Automatic shutdown in idle mode - Vibration-damping machine feet Hodpfx Ajx Eb Tmeb Uefr

Condition: excellent (used), Vecoplan 350/140 Chipper / Shredder Catalogue No. 7742 TECHNICAL DATA - Infeed width: 350 mm - Infeed height: 140 mm - Shaft width: 345 mm Hedpfjxcx S Isx Ab Uefr - Shaft diameter: 290 mm - Number of knives: 2 pcs - Screen size: 55x55 mm - Toothed feed shaft from above and below - Shaft motors: 2×1.5 kW - Electric auto-reverse (adjustable) - With vibrating chute - Vibrating chute length/width: 3750×355 mm - Full vibrating chute dimensions: 3750x620x1210 mm - Discharge with conveyor belt: 2970x340 mm - Conveyor belt dimensions: 3000x630x750 mm - Main motor: 22 kW - Dimensions (L/W/H): 3000x1100x1500 mm - Weight: approx. 2500 kg ADVANTAGES – German-made – with vibrating chute – With discharge conveyor – Auto-reverse – Used chipper, in very good condition Net price: 47,900 PLN Net price: 11,400 EUR depending on the exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), LINE (year 2024) for transporting, assembling and pressing furniture carcasses. Composed by: A) Motorised belt for transporting and assembling furniture (length mm 2500) B) Clamping Pressing machine Mod. WEPRESS TWIN EP 8. 2, with motorised belt conveyor, furniture diemensions Hodpfjwcn Hdsx Ab Uefr - Min/Max length: mm 250 /2500 - Min/Max depth: mm 300 /820 - Min/Max height: mm 250 / 1200 C) Turning device (0°-180°) Automatic (motorised belt) length mm 1800 + flaps D) Motorised conveyor belt (length mm 2500) E) Motorised conveyor belt (slow speed) length mm 7000, for insertion of drawers, corners (protections), cartons (packaging) F) Motorised conveyor belt (length mm 5000) G) Motorised conveyor belt (length mm 2500) H) System Mod. SILVERPACK 150 LIGHT - S self-dimensioning system for automatic closing (lower and upper) of cardboard boxes. Complete with lower and upper, self-adjusting (with adhesive tape) TAPER. Maximum useful dimensions (external box) mm 1530 x 820 x 1350 (H) and Minimum useful dimensions (external box) mm 300 x 160 x 160 (H) I) 90° Transfer (with rollers and 6 belts) for the outfeed of packed products (mm 1600 x 850 x 700H) L) Inclined conveyor with idle rollers for the accumulation of packed furniture (mm 6000 x 800 x 450H)

Condition: ready for operation (used), Year of construction: 2019, A tray packaging machine Multivac including an auxiliary packaging machine MCS 260 is available. Tray dimensions X/Y 1: 187mm/137mm, film width 1: 335mm, tray dimensions X/Y 2: 340mm/128mm, film width 2: 315mm, max. cycle rate: 15cycles/min, throughput: approx. 45trays/min, max. tray depth: 130mm. Machine dimensions X/Y/Z: approx. 4500mm/1050mm/2100mm, weight: approx. 1700kg. Documentation available. An on-site inspection is possible. Hjdpox Db Unsfx Ab Usfr

Year of construction: 2007, condition: ready for operation (used), General Data Machine weight 4100 kg Hfedjx D D Epspfx Ab Usr Measurements height 180 mm Dimensions Machine Length 420 mm Main Drive Spindle Speed 6000 RPM This GRIGGIO G 240P/5U was manufactured in 2007. It features a maximum planing width of 240mm and height of 160mm, accommodating workpiece sizes up to 240 x 160mm. Equipped with five spindles, including a universal turning shaft, and spindle speeds up to 6000 rpm. The machine allows smooth feed adjustments up to 30m/min. Weighs 4100kg with dimensions of 440x220x180cm. Contact us for more information about this machine. Application Types Planing

Condition: excellent (used), Catalogue number 7411 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 180 mm - Shaft width: 430 mm - Shaft diameter: 430 mm - Knife length: 430 mm - Number of knives: 2 pcs - Screen dimensions: 60x60 mm - 2 gear-driven feed rollers from below - Lower feed roller motor: 1.5 kW - Gear-driven feed roller from above - Upper feed roller motor: 1.5 kW - Belt feeder Hsdpfot N Tt Tjx Ab Ujfr - Belt feeder length: 2250 mm - Belt feeder width: 400 mm - Main motor: 30 kW - Auto-reverse - Overall dimensions (L/W/H): 4300x1630x1000 mm - Weight: 1800 kg - German made - Auto-reverse (adjustable) - Used chipper, in very good condition Net price: 69,900 PLN Net price: 16,640 EUR based on rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), Catalogue number 7260 TECHNICAL DATA - Charging hopper inlet: 870x730 mm - Rotor working width: 710 mm - Main motor: 18.5 kW - Pump motor: 0.75 kW - Number of knives: 19 pcs - Knife size: 75x40 mm - Screen: 15 mm - Pressing drawer Hsdpfx Abjrit Ruj Ujfr - Electric auto-reverse - Outlet for shredded wood: diameter 250 mm - Dimensions (L/W/H): 2350x1400x1670 mm - Weight: 1360 kg ADVANTAGES – Pressing drawer – Very good condition – Used shredder Net price: 37,900 PLN Net price: 9,020 EUR depending on the rate of 4.2 EUR (Prices may change in case of larger fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 6114 TECHNICAL DATA - Feed hopper inlet: 800x1000 mm - Rotor working width: 800 mm - Pump motor: 0.75 kW - Main motor: 15 kW - Number of knives: 21 pcs - Knife size: 30x30 mm - Screen: 0.8x10 mm - Pressure drawer - Electric auto-reverse Hjdpfx Absgnzd Es Usfr - Discharge augers: 2×1.1 kW - Dimensions (L/W/H): 2460x1800x2250 mm - Weight: 1660 kg – German-made – Auto-reverse – Pressure drawer – Not painted – In very good condition – Used shredder Net price: 63,900 PLN Net price: 15,200 EUR depending on the exchange rate, 4.2 EUR (Prices may vary with significant exchange rate fluctuations)