Used Wood Working Machines for sale (79,522)

Condition: good (used), Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Motor: 4.4 kW 2890 rpm at 50 Hz Fodpfx Aob A Ialebmopb -Motor: 6.6 kW 5890 rpm at 100 Hz -Shaft mount: Ø 35 mm -Dimensions: 550/180/H200 mm -Weight: 40kg

Condition: new, Wood chipper BX 62 R Fpedpfjx S Uh Hsx Abmsb Condition: New

Condition: excellent (used), Format Circular Saw FKS 550-3200 M A PRO - Year of manufacture: 2023 - Max. cutting height: 200 mm - Cutting height: 200/140 mm - Crosscut width left of the saw blade: max. 3200 mm - Cutting width with parallel fence: 1450 mm - Saw blade tilting: 90 – 45° - Dimensions (LxWxH in mm): 3,386 x 3,703 x 1,330 - Main saw blade with belt drive and speeds: 2800/3665/4800 rpm - Vibration-free operation due to high dead weight (1,070 kg) - Large support table with material roller - Parallel fence with round bar guide - Extendable aluminium rip fence with digital display (2 folding stops) - Quadruple ball-bearing format sliding table with twin roller carriage made of anodised aluminium, high torsional stiffness - Large pendulum safety guard with gas pressure spring Fpedpfx Aboxfku Tomob - Multiple locking positions on sliding table - Motorised saw blade tilt & height adjustment with digital display - 8.8 kW main motor - Tool-free rapid system for saw blade clamping - Saw unit can be switched on and off - On/off switch on the sliding carriage - Edging length: 3200 mm

Condition: used, Year of construction: 2007, operating hours: 8,599 h, machine/vehicle number: 0300120924, mast type: telescopic, fuel type: diesel, Empty weight: 16.992 kg Lifting capacity: 230 kg Working height: 2.820 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Outrigger Max. horizontal reach: 2290 m Transport dimensions (LxWxH): 12.2x2.49x3.05 Please contact PFEIFER GROUP for more information Fpodjxt Db Nopfx Abmjb

Condition: used, mileage: 1,405,000 km, Year of construction: 2006, Serial number: XLER6X2000512xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20683 Specifications: Model year: 2006 Mileage: approx. 1,405,000 km Transmission: Opticruise Suspension: Full air Tires: See photos Body: Vang body with hydraulic roof and side Tipping: Rear tipping Length: 870 cm Width: 255 cm Wheelbase: 410 / 136 cm Curb weight: 12,590 kg Engine power: 500 hp Fuel type: Diesel Equipment: Tool compartment Slirej sand spreaders Bull bar Auxiliary driving lights 2x bunk beds Radio/CD Air conditioning / climate control Description:Scania R500 wood chip truck with Vang body, hydraulic roof, and hydraulic side opening.EU-approved until 07.10.2025.A matching chip trailer is available for an additional cost – see photos. Fpodpfx Aewqwlrjbmeb The truck is ready for delivery. Km: 1405000 HK: 500 Technical approved: no EU-approved until: 07.10.2025 Own weight: 12590 Total Weight: 27000 Payload: 14335 Width: 255 Length: 870 Euro: 3 Model: R500 Gearbox: Automatic

Condition: ready for operation (used), total height: 3,020 mm, total length: 3,300 mm, total width: 5,100 mm, throat depth: 1,060 mm, zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering CNC-gestuurde variabele snelheid voor invoer en zagen spaantransportband uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor de contouren van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor de uitlijnen van het werkstuk - Maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rollenbaan is 4 ton - 4 meter uitvoerrollenbaan: één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Max height of workpiece: 860 mm Sawspeed: 16 > 80 m/min Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Weight: 9 ton (only machine) Fpsdov Sfp Aopfx Abmob

Condition: good (used), Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1720 rpm -Shaft holder: Ø 30 mm -Price: per piece Fpodpfx Aocm Slkjbmjb -Number: 1x available -Dimensions: 910/290/H190 mm -Weight: 58 kg

Condition: used, New: Yes Fpjdpox S Uavsfx Abmsb Power: 40 kW (55 HP)

Condition: used, Year of construction: 2011, operating hours: 4,445 h, machine/vehicle number: 0300151197, mast type: telescopic, fuel type: diesel, Empty weight: 18.320 kg Fjdpfx Abjxpdc Eomopb Lifting capacity: 230 kg Working height: 3.870 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Outrigger Max. horizontal reach: 2350 m Transport dimensions (LxWxH): 13.7x2.49x3.05 Please contact PFEIFER GROUP for more information

Condition: used, machine/vehicle number: WMAN16ZZ59Y23xxxx, mileage: 132,000 km, Year of construction: 2010, Please contact ATS Norway for more information Please provide reference number upon request: 21964 Specifications: - Eu-approved until 21.07.2026 - Km: 132,000 - Transmission: Automatic - Suspension: Steel front and air rear - Engine brake - Euro 5, 250 hp - Good tires - 4x2 - Support legs that go straight down Fpodjx A R Rcspfx Abmsb - Liftco A18 Lift - Max load passenger basket: 300 kg - Working height: 18 meters - Lift is approved until 10.2026 - Max load support legs: 8000 kg - Extra lights - Bunk - Radio/CD - Air conditioning/AC - Self-serviced - Ready for delivery Description: Rare opportunity to secure a MAN Lift truck with a working height of 18 meters. Both car and lift are approved. Only 132,000 km and ready for delivery. Support legs go straight down and not out to the side. Easier on narrow roads. Km: 132000 HK: 250 Technical approved: Yes EU-approved until: 21.07.2026 Own weight: 13570 Payload: 1855 Model: 2010 MAN TGM 15.250 Liftbil m/ 18 m Arbeidshøyde. 132 000 km!

Condition: ready for operation (used), chuck outer diameter: 700 mm, total height: 3,415 mm, controller model: Siemens 840D Solution Line, empty load weight: 17,000 kg, Type: Ultrix 800 RT De Ultrix 800 RT is een multifunctioneel bewerkingscentrum met 5 geïnterpoleerde assen en een beweegbare portaalconstructie voor snel frezen, draaien, slijpen, boren, tappen, afwerken, ontbramen en voorbewerken van complexe onderdelen. Bij gebruik voor draaien verticale draaibank: - Draaibereik: 1100 mm - maximaal gewicht van het werkstuk: 700 kg - 40/30 kW op de tafel - maximaal koppel op de tafel: 1500 Nm - Maximale snelheid van de tafel: 1000 tpm!! - hydraulische klemming op tafel - gereedschapsconus voor draaien: KM63 - Gereedschapswisselaar met 150 posities, waarvan 24 voor draaien. Bij gebruik voor frezen, slijpen, boren, ... bewerkingscentrum: - X-as: 800 mm - Y-as: 900 mm - Z-as: 600 mm - A-as: -30° / 110° - C-as: continu - maximaal gewicht van het werkstuk: 700 kg - 55/40 kW op de spindel - maximaal koppel op de spindel: 22 Nm - maximaal 40.000 toeren per minuut - gereedschapsconus voor frezen: HSK-E40 - Gereedschapswisselaar met 150 posities en 126 gereedschapsposities voor frezen, slijpen en boren Lijst met opties die op de machine zijn gemonteerd: 1 - Hogesnelheidsspindel met 40.000 tpm 2 - tafeldiameter 700 mm met hydraulische klemming 3-150-positie gereedschapswisselaar 4 - spanentransportband 5 - koelsysteem met terugwinning 6 - regeling van de koelvloeistoftemperatuur 7 - hogedrukkoeling (40 tot 70 bar) door spindel 8 - rookafzuigsysteem 9 - doos voor het verzamelen van chips 10 - Voorinstelsysteem en gereedschapsintegriteit: laser- en mechanische meetsonde voor meetinstrumenten 11 - Renishaw-sonde Max turningdia -- passage: 1100 mm Power on the spindle: 40/30 kW Long: 4655 mm Wide: 5890 mm Fpodoxtgkaspfx Abmeb Turret: yes Qty Tools: 150 positions Coolant pump: yes

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1420 rpm -Shaft mounting: Ø 30 mm -Quantity: 1 available -Dimensions: 670/290/H190 mm Fjdpfxecm Slhe Abmopb -Weight: 57 kg

Condition: used, New: Yes Colour: Blue Fpsdsx S R Ddspfx Abmjb

Condition: used, Year of construction: 2004, operating hours: 9,737 h, machine/vehicle number: 0300080910, mast type: telescopic, fuel type: diesel, Empty weight: 20.200 kg Lifting capacity: 230 kg Working height: 4.330 cm Fsdpfx Abjxt Dbvemjpb Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Outrigger Max. horizontal reach: 2440 m Transport dimensions (LxWxH): 14.88x2.49x3.05 Please contact PFEIFER GROUP for more information

Year of construction: 1994, condition: good (used), Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor Fjdpfsu Scpqjx Abmjpb -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Stephan type ZBXD90L20-2 gearbox BMB 46 -Power: 2.2 kW -Speed: 12155 rpm -Cutter width: 30 mm -Adjustment range: 0 - 70 mm -Dimensions: 460/370/H570 mm -Weight: 89 kg

Condition: used, New Wallenstein log splitter, WX350EU. Log splitter can be used in the tractor's three-point hitch. Splitting force of 20 tons. Maximum log length: 61 cm. Fpodpfx Aox S Nf Hobmjb Wallenstein log splitter Model: WX350 Condition: Used

Condition: used, Year of construction: 2016, operating hours: 6,168 h, machine/vehicle number: 03001246303, mast type: telescopic, fuel type: diesel, Empty weight: 18.650 kg Lifting capacity: 230 kg Working height: 3.873 cm Front tyres / undercarriage remaining: 30 Rear tyres remaining : 30 Tyre brand: Outrigger Max. horizontal reach: 2351 m Transport dimensions (LxWxH): 13.7x2.49x3.05 Please contact PFEIFER GROUP for more information Fpjdpfexu Aizox Abmob

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz Fpodpfx Abeb A Hn Ssmsb -Gear ratio: 1:2.5 -Voltage: 220/380 volts -Receiving shaft: Ø 30 mm -Tool: Ø 153 x 117 mm -Dimensions: 630/400/H200 mm -Weight: 56 kg

Condition: used, New: Yes Fpsdpfx Abox S I Igjmeb Colour: Green

Condition: good (used), Double end profiler, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 5820 rpm at 100 Hz -Power: 3.7 kW 17350 rpm at 300 Hz Fjdpjcfihfofx Abmepb -Voltage: 220/220 volts -Shaft holder: Ø 24 mm -Dimensions: 355/125/H210 mm -Weight: 20 kg

Condition: good (used), Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter Fodociv Tcopfx Abmopb -Outer: Ø 160 mm -Height: 45 mm -Radius -Support: Ø mm -Weight: 5.6 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor Fedpfxob A Hhtj Abmopb -Unfortunately, no type plate, therefore data approx. -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 volts -Receiving shaft: Ø 40 mm -Tool: Ø 200 x 20 mm -Dimensions: 520/250/H160 mm -Weight: 42 kg

Condition: good (used), Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer diameter: 180 mm -Quantity: 2 cutters -Bore: Ø 35 mm -Price: complete Fpsdpfjb A Sq Dox Abmsb -Weight: 9.5 kg

Condition: good (used), Wood milling inserts, knife inserts, form milling inserts -Blade width: 39 mm Fodsb A Subepfx Abmopb -Blade thickness: 2 mm -Radius: 7.5mm -Price: complete -Weight: 0.8kg

Condition: good (used), Wood milling inserts, knife inserts, form milling inserts -Blade width: 40 mm -Blade thickness: 2 mm Fedeb A Sugopfx Abmspb -Price: complete -Weight: 0.3kg