Used Ws 54 for sale (3,773)

Condition: used, Year of construction: 2024, operating hours: 1 h, load capacity: 5,000 kg, lifting height: 5,400 mm, free lift: 1,770 mm, mast type: triplex, construction height: 2,650 mm, power: 54 kW (73.42 HP), fork length: 1,400 mm, empty load weight: 8,810 kg, total length: 4,420 mm, drive type: Diesel, construction width: 2,150 mm, Sideloader Load center of gravity: 700 Mast type: Triplex Condition: New machine Technical condition: New Hodpfx Ajunnw Dobvsni Front tires type: Superelastic Rear tires type: Superelastic Description: New machine available immediately. Manufacturer's warranty 12 months with a maximum of 1000 operating hours.

Condition: good (used), 1 x Deburring machine Hodpfxsiz Dc Rj Abvoni Vollma JK WS 25 Particularly suitable for removing cut-off slugs on turned parts. The machine can be inspected at our warehouse in Reichenbach under power.

Condition: used, Sharpening machine EWAG WS 11 SP Hnedjwp T Nkepfx Abvsi

Condition: used, TECHNICAL DETAILS Oil mist extraction system Hjdpfjuhb Hdsx Abveni - Air flow rate : 470 - 560 [m3/h] - Power : 0.37 [kW] - Weight : 35 [kg]

Condition: used, TECHNICAL DETAILS Oil mist extraction system Hjdpfxeuhb E Ho Abvjni - Air flow rate : 1450 - 1720 [m3/h] - Power : 1.5 [kW] - Weight : 75 [kg]

Condition: ready for operation (used), Chain Hoist, Rema Star 111/54, 4 Meters, 3200 kg, Used Machine Manufacturer: Rema Model: Star 111/54 Hodpfx Abjxxkw Ijvsni Overall Dimensions: Width: 710 mm Depth: 360 mm Height: 460 mm Electrical Data: 380V; 4.4 kW; 10.5A Load Capacity: 3200 kg Lifting Height: 4 m Year of Manufacture: 2008

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 4,020 mm, travel distance Y-axis: 2,020 mm, travel distance Z-axis: 600 mm, controller model: NUM AXIUM POWER, swivel angle A-axis (min.): -46 °, swivel angle A-axis (max.): 46 °, swivel angle C-axis (max.): 3,600 °, Machine including comprehensive accessories TECHNICAL DETAILS X-axis travel: 4020 mm Y-axis travel: 2020 mm Z-axis travel: 600 mm Hodewbvgiopfx Abvsni Support surface X, Y: 4,400 x 2,400 mm Axis angle A, B: ± 46° Rotation axis C: ± 3,600° Repeatability: ± 0.1 mm Positioning speed: 10 m/min Max. machining temperature range: +10°C to +40°C High-pressure pump Design pressure: 420 MPa Operating pressure: max. 400 MPa Continuous operating pressure: max. 380 MPa Flow rate: max. 3.8 l/min Drive power: 37 kW Control & electronics Control: NUM AXIUM POWER Drive system: NUM MDLU 3 Rated motor power: 2 kW Control unit: Rittal PC cabinet with air conditioning unit Control system: Integrated CNC/PLC Measurement system: High-resolution SinCos encoder Software System software: CAD/CAM including 32-bit Windows software Import formats: HPGL, DXF Functions: Automatic approach strategies, jet correction, material database, cutting control, pressure and abrasive control Operating parameters Max. waterjet operating pressure: 4,000 bar MACHINE DETAILS Dimensions (L x W x H): 6,400 x 3,200 x 3,100 mm Machine weight: approx. 10,500 kg Connections Pneumatic connection: min. 6.5 bar Water connection: 2–5 bar Connection values: 400 V AC, 16 A Control voltage: 24 V DC EQUIPMENT - Manual handheld control unit - Double safety light barriers - Abrasive cutting set - Abrasive dosing system with reservoir - Abrasive pressure feed system - Approx. 3 t of cutting sand - Various nozzles, seals, wear and replacement parts

Condition: used, Cambio Debarker 54. If you are interested in purchasing, we are open to discussing the price. Hnodpfx Aoww A E Rsbvsi

Condition: refurbished (used), Year of construction: 2000, operating hours: 3,200 h, functionality: fully functional, fuel: diesel, Machine in excellent condition with low working hours, optional mobile bunkerconveyor (the one on the picture) available for extra. Hnedevy A Urepfx Abvei New conveyor belt cleaner.

Condition: used, Type: PI 54 Number of needles: 54 Needle diameter: 4 mm Hnedpfjk R Tqcjx Abvoi Max product: width 340 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 8kW Machine dimension in cm: Width: 85 Length: 200 Height: 230 Delivery time: 30 working days after advanced payment

Condition: excellent (used), Year of construction: 2007, Used, draw through water/glycol cooler, brand Alfa-Laval type INR W S 6777D/Y. YOM: 2007, SN: 2190988. Max DN = 57 mm; Vn = 3҇230/400V, fluid group 2, coil TS 110/-40°C, F = 50 Hz, PT = 10 bar, PS = 9 bar, own weight: 604 kg. Hedpfx Ajucnzwebveni This, in very good condition draw through water/glycol cooler is equipped with: 2 pieces Ziehl Abegg ventilators 07078866, FC063-4DS6KV7, each Ø500, 1,19 kW, 1360/1000RPM; COSY 085, surface more than 90 m2, aluminium casing/aluminium fins Mentioned cooling capacity is with a water/glycol mixture of 30% at a water/glycol basis. Sales price: 2.960 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 03, overall weight: 350 kg, total width: 130 mm, total height: 1,800 mm, input voltage: 380 V, type of input current: three-phase, input frequency: 50 Hz, Equipment: documentation/manual, We have 17 sets of NF42 4/54,2/130，2/84,2/66， Year 1987-2005 With double iron roller With rubber prester With 16-20 Harness Frame With binder thread motion With 6 Contact Rail and Stop Motion Device With 2 weft thread transport State: Clean up and Clean, after repair testing Hnodpfxeu A Ir Es Abvsi

Condition: refurbished (used), functionality: fully functional, The Günther Injector Model: PI 54/105 is a versatile, industrial-grade brine injector designed for high-precision injection into meat, poultry, fish Precision & Output High Injection Accuracy: Features a position-controlled brine valve and a needle-bridge system to ensure the highest injection precision and uniform brine distribution throughout the product. High Throughput: Capable of up to 50 strokes per minute, ensuring high production capacity (estimates around 4,000 kg/h for the 54-needle configuration). Versatile Product Handling: Ideal for injecting products with or without bone across various applications (meat, poultry, fish). Adjustable Injection: Brine pressure is adjustable from 0.5 to 4.0 bar, allowing customization based on product density and desired injection percentage. Control & Hygiene MC2R Touch-Screen Control: Equipped with the MC2R-control with touch-screen, offering user-friendly operation and full automation potential. Recipe Storage: Includes 100 memory spaces for recipe storage, allowing for rapid product changeovers and consistent quality control. Automated Cleaning: Features an automatic sanitation program and a complete separation of the pump cycle from electromechanical components, minimizing maintenance and maximizing hygiene. Hsdsxxphfspfx Abvoni Adjustable Clearance: The product passage height is typically 220 mm, with infinitely variable stroke height selection to precisely match the product being processed. Integrated Filtration: Supported by an inline-filter system (often electronically supervised) or optional automatic rotary filters, ensuring brine purity and protecting the pump system.

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Wave soldering system with comprehensive equipment! A spare parts package worth approximately €20,000 is included in the sale and delivery! The system comprises the following components: - Seho wave soldering system MWS 2340-F - Fluxer SelectFlux - Streamline transport system including lifts TECHNICAL DETAILS - PULSAR preheating: 2 convection and 5 pulsar preheating zones (3,300 mm length) - Wetting length (soldering system): 40 mm + 30 mm - Return transport level: raised 405 mm - Finger conveyor: L-shape, short (3 mm) MACHINE DETAILS - Number of processed solder frames: 1,060,540 pcs EQUIPMENT - Fluxer SelectFlux - Streamline transport system incl. lifts - Automatic solder bar feeder - Process gas cleaning system - Finger cleaning unit - Foldable convection top heater - Fan speed monitoring for convection preheating - Standard soldering unit - Wide solder nozzle unit, 7-row - Solder frame transport system incl. 2 lifts - Cooling tunnel in the return transport of the soldering system incl. timer control - Solder frame lowering station - Replacement filter for condensate trap at machine infeed and outfeed - Residual oxygen measurement with lambda probe - Nitrogen economizing circuit - Transponder system for automatic switching of soldering programs Hedpfoyt Nlbex Abvsni - Selective flux module (external unit) - Flow sensor for flux per spray head - Flux reservoir tank with connections - Replacement filters for external spray fluxer module – upper and lower machine sections - Spare PC

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 91128553, Year of construction: 2018, operating hours: 1,213 h, load capacity: 1,400 kg, lifting height: 4,550 mm, mast type: triplex, fork length: 1,150 mm, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 1,400 kg Lifting height: 4,550 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Triplex Power: 6 kW Fuel type: electric Battery model: 4EPZS 620 Hnedpfxeyq Hirj Abvei Battery capacity: 620 Ah Remaining battery capacity: 95% Battery voltage: 48 V Battery weight: 935 kg Tyre condition: 65% Front tyre type: Superelastic tyres (black) Rear tyre type: Superelastic tyres (black) Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,270 x 2,200 mm Unladen weight without battery: 2,105 kg Total weight with battery: 3,040 kg Operating hours: 1,213 h EQUIPMENT Cabin Pallet forks Sideshift Central lubrication system Standard joystick Operator protective roof Full free lift Battery charger model SLT150

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, battery capacity: 625 Ah, battery voltage: 48 V, 07/2021 AIM 48V 625Ah 5PzS625 Forklift Battery / Traction Battery for Electric Forklifts No minimum price – guaranteed sale to the highest bidder! Hsdpfxoyuwpko Abveni TECHNICAL DETAILS Battery voltage: 48 V Battery capacity: 625 Ah Battery performance: very good performance, measured at 54.40 V MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 830 x 630 x 630 mm Weight: 900 kg EQUIPMENT Battery from former Linde service stock All dimensions are approximate. No guarantee for typing or measurement errors. COLLECTION CONDITIONS Side-loading up to 5 tons possible on site with a large forklift at buyer's risk. Collection ONLY with payment confirmation email! Collection WITHOUT appointment Monday to Friday 7:00 am – 4:30 pm. A mast that is too high can be dismantled for transport upon request. If collection is late, a storage fee of €20 per machine per day applies (the amount due must be paid before collection).

Condition: used, Year of construction: 2021, GMP laminating machine Protopic Auto-540 Year 2021 Manufacturers information: PROTOPIC-AUTO 540 series 540 540 DUAL 540 DUAL PHOTO 540 DUPLEX Perfect & Easy Operation for Digital Printing on Demand Solution - POD Automatic High Speed Roll Laminators - Air compressor & low noise vacuum pump included - Stream feeder installed for auto paper-feeding - Emotional-touching control system - Perfect lamination without bubbles for all kinds of paper quality - Capacitive touch screen - High pressure of laminating roller for enhancing quality of laminating results - Storage of air compressor & vacuum pump in the cabinet - Well-streamlined function adjustment by use of capacitive type touch-screen Function of various information for user-friendly convenience Household power supply (AC 220~240V / 50~60Hz / 15Amp) used for speed 15 m/min Swivel type control panel Maximum sheet size: 540 x 750 mm Maximum pile height: 350 mm Hnedjyuwrropfx Abvoi

Condition: good (used), Stick electrodes 3.25 x 350 -Type: AWS: E 6013 -Analysis: C 0.07, Si 0.2, Mn 0.5% Hnedpfxsb A Sf Tj Abvji -Number: 23 packages available -Price: per package -Weight per package: 4.3 kg

Condition: used, lifting height: 36,000 mm, Year of construction: 2023, Drivetrain Drive: Wheel Weights Empty weight: 29.900 kg Functional Lifting capacity: 27.480 kg Identification Hodjvban Espfx Abvjni Serial number: 783902 Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 3.9x2.55x3.9 Additional information Please contact PFEIFER GROUP for more information

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 1,460 h, load capacity: 4,000 kg, lifting height: 3,100 mm, fuel type: gas, mast type: simplex, construction height: 2,300 mm, fork length: 1,600 mm, drive type: Treibgas, LPG Forklift Mast type: Standard Transmission: Automatic Condition: Operational and fully functional Technical condition: Very good Front tires type: Superelastic Hnedsx U Hb Djpfx Abvji Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Description: Price includes new safety inspection (UVV), NEW paintwork. We are happy to arrange cost-effective transport for you. Hire purchase possible! We are an official partner of Jungheinrich Germany. Sideshift, 3rd valve, rear work lights, front work lights, heater, full cabin, CE certificate, Multi-lever control

Condition: good (used), Year of construction: 2016, operating hours: 47,700 h, functionality: fully functional, Baling press Avermann, type AVOS 1410 BR5 – 45/80, pressing force 80 t, year of manufacture 2016 Technical Data: Manufacturer: Avermann Maschinenfabrik Type: AVOS 1410 BR5 – 45/80 Year of manufacture: 2016 Pressing force: 80 t Drive power: 45 kW Filling opening: 1,400 x 1,000 mm Throughput at 35 kg/m³: 6.0 t/h Throughput at 60 kg/m³: 10.5 t/h Throughput at 100 kg/m³: 17.5 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 600 kg, depending on material Tying: 5-fold vertical, automatic Machine dimensions: approx. 10,850 x 2,400 x 3,800 mm (LxWxH) Machine weight: approx. 18,000 kg Note: The press is in good condition. It has been checked and tested under power by us. A video is available on our website or YouTube channel. The main cylinder was renewed in November 2025. A suitable WESTERIA conveyor belt is optionally available. Please note: All technical data are based on manufacturer information. We do not assume any liability for the information provided or for potential errors. This offer is subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale against advance payment, ex works, without warranty or guarantee. Hjdpfx Aeyuvc Nebvsni

Condition: excellent (used), functionality: fully functional, operating hours: 7,665 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Amada, controller model: AMNC, laser type: CO₂ laser, laser source manufacturer: Amada, laser source model: AF4000E, laser hours: 5,109 h, laser power: 4,000 W, laser wavelength: 10,600 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 900 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 20 m/min, cutting speed: 20,000 mm/min, positioning speed: 100 m/min, positioning accuracy: 0.01 mm, repeat accuracy: 0.005 mm, workpiece weight (max.): 920 kg, power: 60 kW (81.58 HP), input voltage: 400 V, input current: 100 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 12,000 kg, total length: 9,000 mm, total width: 3,000 mm, total height: 2,200 mm, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, AMADA FO3015 4kW CO₂ Laser Cutting System – 2016 – Under Power for sale. Our laser has the complete integrated Amada laser system including the automatic loader, chiller, and extraction. This machine is currently in production and available for inspection. Hnjdpoyi E Rrofx Abvei Please see the below technical details on this laser: • 4kW CO₂ • 3000 x 1500mm bed • Cutting capacity up to 20mm • Cutting Hours: 5,109 • Operating Hours: 7,665 • Installation: 2016 We are open to providing photos and operational videos if requested. This will be available from the 23rd of March 2026.

Condition: good (used), mileage: 660,000 km, power: 302 kW (410.61 HP), first registration: 03/1999, fuel type: diesel, axle configuration: 8x6, fuel: diesel, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel, total length: 9,000 mm, total width: 2,500 mm, total height: 3,060 mm, Year of construction: 1999, Equipment: ABS, = Additional Options and Accessories = - Leaf suspension - PTO (Power Take-Off) = Remarks = 3-way tipper 8x6 = Further Information = Technical Specifications Number of cylinders: 6 Gross vehicle weight (GVW): 35,000 kg Axle Configuration Suspension: Leaf suspension Front axle 1: Steered; Tire tread left: 30%; Tire tread right: 30% Front axle 2: Steered Rear axle 1: Twin tires; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50% Rear axle 2: Twin tires; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50% Hodpfxeyuyp Te Abveni Functional Tipper: Left / Rear Condition Technical condition: Good Optical condition: Good Further Information Please contact Andre, Henri or Andre for more information.

Condition: excellent (used), workpiece diameter (max.): 30 mm, spindle diameter: 54 mm, roll diameter: 125 mm, spindle speed (max.): 224 rpm, spindle speed (min.): 40 rpm, roll width: 70 mm, Excellent Used Profiroll Bad Duben Model UPWS 10 ton Hydraulic Thread Rolling Machine with swivelling spindle for in-feed and thru-feed rolling Max rolling diameter: 30mm - Max thread length infeed rolling: 70mm - Max thread length thru-feed rolling: infinite Hnedpeymlx Dsfx Abvoi Dia. of rolling spindles: 54mm - Max size of thread dies: 125mm dia x 70mm wide - 4 spindle speeds 40 to 224 rpm

Condition: excellent (used), RS Simulators Type: KKM 110/45 Manufacturer: RS Simulators, water-cooled Climatic chamber 110 m³ incl. condenser unit The KKM 110/45 model is part of the TKM/KKM modular system by RS Simulators—a modular climatic chamber that is assembled on-site. This design offers: Modularity: Individual segments are preassembled and set up at the customer’s location. This makes retrofitting (adding depth or expansion modules) and later relocation straightforward. Technical specifications climatic chamber: Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Model: KKM 110/45 External dimensions: 6200 x 9400 x 3400 mm (W x D x H), incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 mm (W x D x H) Chamber door (double-leaf): 3600 x 2930 mm (W x H) Personnel door (single-leaf) in side wall: 1880 x 900 mm (H x W) Feedthroughs: 8 x Ø120 mm (4x left & 4x right) Windows: 1x (460 x 550 mm) in front chamber door, heated 1x (1260 x 1000 mm) in left side wall, heated Temperature range: -40°C to +120°C Temperature fluctuation: ± 0.8K – 1.5K as per DIN 50011 with empty test area Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52 kg 2x R23 17 kg Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg For your safety as a buyer, please note the following information! The following points are always carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant Hnsdpfx Aswwg Uvobvoi 3. Leak testing with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and error!) If you have further questions, we will be happy to answer them by phone.