Netstal EVOS 5500-2000 (2015)

Netstal EVOS 5500-2000

Condition: excellent (used), Year of construction: 2015, Netstal EVOS 5500-2000 Injection Molding Machine Year of manufacture: 2015 Very compact, hydraulic, three-plate clamping unit with encapsulated lubrication system, ensuring an oil-free environment in the mold space. High-precision and wear-resistant linear guides guarantee maximum mold longevity and increased machine availability. The hybrid injection unit features a modular design and a flexible performance package (metering, clamping, injection) that can be adapted to specific applications. The highest plasticizing performance and optimal melt quality are ensured by selecting process-appropriate components. Servo-electric metering drive and state-of-the-art valve technology guarantee energy-efficient operation. Technical parameters Certification: CE in accordance with EU Directive 2006/42/EC (EN 60204, etc.) Mold installation height: 600–1050 mm Injection unit drive: metering axis speed up to 420 rpm, torque 2400 Nm Injection unit Injection speed: maximum dynamics thanks to high-performance servo valve technology Screw: 62 mm diameter, 25.2D length, version B – Three-zone screw made of hardened, wear-resistant tool steel – Injection pressure: 2400 bar – Injection volume: 749 cm³ Clamping unit Ejector force: 123.2 kN Main drive: Eco Powerunit 55 kW – Dual pump system with hydraulic accumulator – High-efficiency synchronous drive – Adaptive control technology for maximum energy efficiency Oil cooling: supply water temperature 35°C Base Cylinder head with open nozzle, prepared for pneumatic control Guide bushing R = 35 mm, through-hole D = 5 mm Mold plate hole pattern: Euromap standard Centering and ejector system Centering on nozzle-side plate: D = 125 H7 x 20 mm (Euromap) Through-hole in moving platen: D = 80 mm Ejector hydraulics positioned on the operator offside Ejector hole pattern: Euromap Ejector controlled Mold hydraulics 4 hydraulic circuits for auxiliary functions (ejector, cores, nozzle pins) Electrically controlled check valves in circuits A + B Free configuration of functions with position protection Nozzle hydraulics with needle shut-off 4 hydraulic circuits Flow speed and pressure manually adjustable Open/close function Special software: cascade control Pneumatics and cooling Water cooling battery and hot runner circuit – 4-section, switchable Pneumatics: 2x 3/2 valve, capacity 890 l/min Location: on operator offside at nozzle-side platen Electronics / Software / Interfaces Frequency: 50 Hz Power supply: 400V, 3P + N + E, tolerance ±10% (transformer required for larger deviations) Surge protection Mold heating: – 4 circuits at 3.3 kW each – 8 circuits at 0.75 kW each Connectors: HAN 16E for power and sensors, Euromap 14 Sockets: – 2x 16A CEKON (main switch-controlled) – 1x 32A CEKON with RCD (FI) switch Interfaces: – Euromap 15 – full implementation (parts 1–5) – SPC (Statistical Process Control) – Euromap 66 (control of 5 heating/cooling units) – Euromap 67 (robot interface for ejector and hydraulics) Laedpfexl Ul Asx Ah Ujk External fault signals: 2 inputs in control cabinet Operator identification: PIN

Condition: excellent (used), operating hours: 2,658 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,000 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, input current: 200 A, oil tank capacity: 1,250 l, empty load weight: 29,000 kg, Technical data baler: Manufacturer BOA Recycling Systems B.V. Type M75-45-A-5-1.6 Ecoline Year of construction 2021 Hours of operation 2,658 hours (as of May 2024) Number of pressed bales 42,212 pieces (as of May 2024) Press power main press 71,2 kN (71 t) Specific press capacity 9 kg/cm² Operating pressure 280 bar Cylinder stroke 2,200 mm Feed channel 1,620 x 1,000 mm Capacity per cycle time 2,4 m³ Theoretic cycle time 21 seconds Theoretic throughput rate 450 m³/hour Bale size 1,100 x 720 mm, length variably adjustable up to 1,400 mm Driving motor 45 kW Connected load 100 kW Current consumption 200 A Tying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal binding Throughput rate at a bulk weight of 30 kg/cbm approx. 13,6 tons/hour bulk weight of 50 kg/cbm approx. 24,2 tons/hour bulk weight of 100 kg/cbm approx. 36,4 tons/hour bulk weight of 150 kg/cbm approx. 54,7 tons/hour Bale weight up to 600 kg, depends on material Volume hydraulic oil tank 1,250 l SPS controller Siemens S7 1500 Operating panel Siemens SIMATIC HMI TOUCH Transport dimensions of press 10,000 x 2,800 x 3,385 mm (l x w x h) Press height set up with feed chute 4,743 mm Press height with conveyor belt 7,123 mm Machine weight baler approx. 29 tons Laodsu Thcvjpfx Ah Uok Noise level <85 dB (A) Condition of the baler: With 2,658 operating hours, the press is almost as good as new and in very good condition, has hardly any signs of wear and is ready for immediate use. Due to larger material input quantities, the pressing force and throughput of the machine no longer meet the customer's current requirements and is therefore being replaced by a new 120 tonne baler. Only the baler is for sale, without conveyor belt and wire drawing stations. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), Year of construction: 2021, operating hours: 301 h, machine/vehicle number: 257240, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 470 mm, injection pressure: 2,000 bar, plate length: 637 mm, plate width: 637 mm, power: 42.7 kW (58.06 HP), type of input current: three-phase, Equipment: documentation/manual, Arburg Allrounder 470 E 1000-170 Golden Electric Machine as new. Very little used, only for sample production. Machine is fully equipped: Laodpfx Asxbn T Seh Uok 30 mm screw High wear-resistant cylinder 2nd core pull control for sequential movements – holding pressure via check valve 4 free circuit water manifold with optical flow indicator Conveyor belt – electric 6 electrical heating circuits for mold temperature control Full documentation available. Full specification list on demand via email.

Condition: new, Year of construction: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer utilizing real-time Ethernet technology, equipped with a built-in 21.5" operator panel with a full-colour touchscreen. Plasticising unit Complete plasticising unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Nozzle radius: 15 mm Nozzle orifice: 6 mm Technical data (standard version) Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H x V): 995 x 1050 mm Tie bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Ejector stroke: 200 mm Ejector force front/back: 58 / 28 kN Injection unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2006 bar Injection volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Injection rate (standard): 311 cm³/s Screw speed (standard): 260 rpm Electro-hydraulic system Lsdpfx Ajxdd Spoh Uoak Pump motor power: 45 kW Installed heating capacity: 22.4 kW Dry cycle time according to Euromap 6: 2.7 s Hydraulic oil tank capacity: 720 l Linear robot – Krauss-Maffei LRX 150 Payload < 15 kg (gripper + drives + parts) Part removal to the operator’s opposite side Axes: X-axis (from mould): 900 mm, servomotor Y-axis (vertical, with motor brake): 750/750 mm, servomotor, telescopic Z-axis (transverse): — Dimensions and weight Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Condition: used, Year of construction: 2016, functionality: fully functional, 400 kVA transformer station, year of manufacture 2016, make Scheidt; 400 kVA oil/hermetic transformer, make CG Power, year of manufacture 2013, type DECkC0, 20 kV ± 2x2.5% / 400V with HV plug-in bushing; including switchgear. Ledpfsx Dahtsx Ah Uoak

Condition: good (used), Year of construction: 2015, Ref. no.: 18589 Hersteller: NETSTAL Type: Elion 1750-510 M Electric machines Year of construction: 2015 Clamping unit Clamping force: 175 ton Opening stroke: 450 mm Distance between tie bars: 560 x 560 mm Mould height min.: 500 mm Mould height max.: 800 mm Platen size (h x v): 830 x 845 mm Injection unit Laedexdxpcopfx Ah Uok Screw diameter: 40 mm Injection volume: 201 cm³ Shot weight: 193 g Injection pressure: 2400 bar Measurements and weight Dimensions: 7,1x2,2x2,0 m Machine weight: 12750 kg

Condition: new, Year of construction: 2025, Injection Moulding Machine – Krauss Maffei KM 651-6100 GX Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit pressure regulation. MC6 control system based on an industrial PC using real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a color touchscreen display. Plasticizing unit Complete plasticizing unit for thermoplastics, screw diameter 95 mm, with non-return valve and open nozzle Nozzle radius: 25 mm Nozzle opening: 9 mm Technical data (standard version) Clamping unit Clamping force: 6500 kN Opening force: 455 kN Platen dimensions (H x V): 1660 x 1530 mm Tie bar spacing (H x V): 1200 x 1020 mm Clamping stroke: 1450 mm Mould height (min.–max.): 450 – 1000 mm Daylight: 1900 mm Ejector stroke: 300 mm Ejector force forward/reverse: 140 / 70 kN Injection unit Screw diameter: 95 mm L/D ratio: 23.0 Injection pressure: 1795 bar Injection volume: 3367 cm³ Shot weight (PS): 2391 g Injection speed: 110 mm/s Injection flow rate: 780 cm³/s Screw speed (standard): 147 rpm Laedpexdd U Djfx Ah Usk Plasticizing capacity (standard screw speed): 102 g/s Nozzle contact force: 166 kN Electro-hydraulic system Pump motor power: 97 kW Installed heater power: 54 kW Number of cylinder heating zones: 7 Dry cycle time (Euromap 6): 3.3 s / 840 mm Dry cycle time (KM standard): 2.9 s / 600 mm Oil tank capacity: 1435 liters Linear robot – Krauss-Maffei LRX 250 Payload capacity < 25 kg (gripper + drives + parts) Part removal on the operator-offside Axes: X axis (from mould): 900 mm, servo motor Y axis (vertical, telescopic, with motor brake): 1000/1000 mm, servo motor Z axis (transversal): 2500 mm, servo motor Dimensions and weight Net weight (incl. control cabinet): 38.5 t Machine dimensions (L x W x H): 10.19 x 3.03 x 2.51 m

Condition: good (used), Year of construction: 2003, Netstal S-1500-460 (2003) Clamping force - 150 t Screw diameter - 45 mm Hours - 79.000 Distance between tie‑bars (tie bar spacing): 460 × 460 mm Mold platens size (fixed / moving platen): 757 × 757 mm Opening stroke (mold opening stroke): 450 mm Min. mould height: 250 mm Max. mould height: ≈ 550 mm Max. daylight (max open platen distance): sometimes specified high (depending on configuration) Injection / Plasticizing Unit: Screw (barrel) diameter: 40 mm in common version. Lajdswkg Txjpfx Ah Uok Shot volume (max): ≈ 201 cm³ Shot (weight) for PS: often around ~193 g (depending on material) Injection pressure: varies by configuration (some data sources mention around 1750 bar or more) Machine Dimensions & Weight: 10 400 kg

Condition: like new (used), Year of construction: 2021, operating hours: 19,641 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 635 mm, displacement volume: 353 cm³, mold height (min.): 250 mm, opening stroke: 500 mm, total length: 6,660 mm, total width: 2,000 mm, total height: 2,352 mm, overall weight: 18,400 kg, heating capacity: 18.7 kW (25.42 HP), power: 100 kW (135.96 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 160 A, Equipment: documentation/manual, KM PX 201-1000 200 tonnes Full Electric Like new, 19,000 operating hours 3 hydraulic core pulls Hydraulic ejector Ljdpfx Aoxwl Ekjh Ujak Mold heating: 24 zones Water supply: 16 zones Injection unit heating: 6 zones Screw diameter: D-50mm

Year of construction: 2008, operating hours: 75,559 h, condition: ready for operation (used), Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Ljdpjx D Rgyefx Ah Usak Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply This Krauss Maffei KME 75-36 R AC single screw extruder was manufactured in 2008. It features a KM-GM 750 control integration with meter weight and mass throughput control, and a capacity of up to 750 kg/h granulate. The machine includes a connection for INDEX wall thickness measurement and is equipped with a EURO socket CEE 32 A - 6 H / 250 V. Contact us for more information about this machine. Application Types Extrusion