MITRE SAW model OMGA T 50 350

OMGA T50 350

Condition: used, Crosscut Saw, Mitre Saw OMGA T50.350 2.2 kW - after technical inspection, ready for operation Specification: • Technical condition – used, after inspection • Manufacturer – OMGA • Model – T50.350 • Blade diameter – 350 mm (bore 30 mm) • Saw motor – 2.2 kW • Max. dimensions of cut element at 90°: 100 x 165 mm (H x W) • Safety covers on the saw for operator protection • Extraction outlet – ø80 mm Lodpfjyg R Nuox Adtshf • Cutting angle adjustment: +/- 45 degrees • Overall dimensions without extension tables: 75 x 62 x 80 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The attached photos show the actual condition of the item for sale • On-site inspection and operation check possible • The price listed in the auction does not include VAT or transport costs Financing and transport: • We organise transport by MDD fleet, courier companies, or external carriers • We offer financing support in the form of leasing or lease loans

Condition: excellent (used), used container system, dry, sealed, uncleaned Lhsdpfeyt Nzcsx Adtef - consisting of 6 units of 20-foot containers = approx. 90m² - reinforced floor Dimensions per container: Length: 6.00 m Width: 2.50 m External height: 2.96 m Internal height: 2.70 m Insulation: Roof: 100 mm Walls: 60 mm Floor: 100 mm Equipment: - 2x double-leaf exterior doors - Plastic windows with insulated glazing and tilt/turn function - Blinds - Electric heating - Sealing gaskets - Wall cladding - Ceiling cladding - Transition plates - Container clamps - Structural calculations available The unit is dismantled and prepared for transport. Loading and transport can be arranged. Only serious and reputable inquiries will be answered, stating: name, e-mail address, and telephone number.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 230 V, DGUV certified until: 05/2028, total width: 336 mm, total length: 483 mm, total height: 558 mm, empty load weight: 20 kg, input frequency: 50 Hz, electrical fuse: 10 A, power: 0.25 kW (0.34 HP), NEW +++ Planetary Mixer +++ NEW Model: SE 10 L Proven technology ... repeatedly tested! Simple manual operation LED display with 5 power levels 1 stainless steel bowl, 10 liters 1 flat beater 1 dough hook 1 whisk Bowl safety guard / access protection TOP mixer as a countertop machine with bowl lift 220V connection DGUV V3-tested – exclusively through us TOP quality and price in one machine! NEW machine, SAB inspected With warranty + spare parts service Lhodpfx Asu A Hiijdtef We have over 500 bakery machines in stock!

Condition: used, Präzision Kapp- und Gehrungssäge  / Precision Miter Saw OMGA T55 300 Baujahr / Year ca. 2009 mit Absaugung / with suction Sägeblattdurchmesser / Saw blade Diameter 300mm Lhedpfx Adexvh E Rotsf Schnittbreite / Cutting width max. 90° 135 mm Schnittbreite / Cutting width max. auf 45° 90 mm Schnitthöhe / Cutting high  max. 98 mm Festpunkte bei / Fixed Points on a 45°- 30° - 22°30' - 15° - 10° rechts und links Sehr guter Zustand / Very good condition Verstellbare Präzisionskapp- und Gehrungssäge mit Drehtisch, selbstzentrierender Blockierung in den Hauptwinkeln 45°, 30°, 22°30’, 15°, 10° und 0° rechts und links, manueller Blockierung der Zwischenwinkel, Winkelablesung von Gradskala. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Weinig four-sided planer max planing width 230mm Ljdpfxjrigxyo Adtshf max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available Ljdpfxsxnvq Eo Adtshf IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: new, welding current 15 - 40 A cutting capacity 1 - 16 mm open-circuit voltage 96 V Required air-pressure min. 4 bar connected load 3,6 kW connected load frequency 230 V weight 9,0 kg Lsdpfxoupxfho Adtjhf Dimensions (LxWxH) 371 x 153 x 232 mm Exhibition machine !! Inverter plasma cutter with accessories: Cutting torch with 4 m cable, earthing clamp with 2.5 m cable, air pressure gauge, Mask and brush.

Year of construction: 2020, condition: ready for operation (used), A color measurement device Datacolor is available. Measurement geometry: d/8°, illumination system: Dual, integrating sphere diameter: 152mm, wavelength range: 360nm-700nm, wavelength resolution: 2nm, measurement interval: 10nm, photometric range: 0%-200%, spectral analyzer: SP2000. Machine dimensions X/Y/Z: approx. 320mm/340mm/420mm, weight: approx. 17kg. Documentation available. An on-site inspection is possible. Ljdpfsxg Riyex Adtohf

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Ledpfxsxnlgce Adtshf Storage location: Garbsen

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, spindle speed (min.): 18,000 rpm, spindle speed (max.): 2,800 rpm, mount diameter: 300 mm, feed length Y-axis: 1,800 mm, Two-station CNC lathe – Efficiency, precision and productivity in the processing of cylindrical parts The CNC lathe with 2 working units and numerical control is a modern solution for the processing of wooden parts with a cylindrical shape – such as columns, table legs or decorative elements – offering accuracy, repeatability and efficiency in any workshop or factory. Double performance with independent units Equipped with two working units that operate simultaneously or independently, the lathe allows the rapid processing of parts up to 1200 mm. It is ideal for the series production of furniture components, church elements or artistic objects. Solid construction for durability The welded frame made of rectangular profiles, heat-treated, provides stability and torsion resistance. Linear guides on the X, Y and Z axes ensure precise, vibration-free movement. Precision through numerical control Hybrid servomotors, together with the rack and pinion system, guarantee precise positioning and efficient control on all axes. The manually adjustable tailstock with four clamping points stabilizes the parts during complex operations. Advanced motors and cooling Water-cooled motors allow operation at speeds of up to 18,000 rpm without overheating, ensuring a constant work rate and an extended service life. Intelligent DSP control The DSP control unit with internal memory allows for quick file import, project resumption from the stopping point and real-time parameter adjustment – ideal for a continuous and efficient production flow. Precision and maintenance auxiliary systems Self-centering chucks firmly fix the parts, while optical sensors and an automatic lubrication system ensure precision and low maintenance. Key advantages Perfect repeatability, even for large production runs Flexibility in operation with independent work units Robust construction and energy efficiency This CNC lathe is designed to deliver consistent performance, high quality and adaptability in woodworking, making it the ideal choice for modern workshops or furniture factories that aim to optimize production processes. Maximum working length 1200 mm Maximum working diameter (Ø) 300 mm Number of work units 2 pcs Control DSP Workpiece rotation speed 0 – 2800 rpm Motor power 4.5 kW Mill speed 18000 rpm Inverter “BEST” inverter Drive motors Servo motors – Hybrid Maximum feed 50 mm/ s Accuracy Lsdpfowhbguex Adtjhf 0.0125mm