ORT RP30U inverter

ORT RP30U inverter

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Chjdpouiy Ngsfx Abrod Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Condition: used, Saw BEHRINGER HBE 321 A Dynamic Chodpfx Asx Tvkxebrod

Condition: good (used), Year of construction: 2009, Parts shown by hand not come. Technical data shown on pictures. Cedozk I R Aepfx Abrehd

Year of construction: 1962, condition: good (used), machine/vehicle number: 1083, Broaching Machine - Vertical Csdpefc T Euofx Abrohd Manufacturer: Rausch Type: RS10/915 Machine number: 1083 Year of manufacturing: 1962 Force: 10 Tons Stroke: 915 mm System DIN 1415 With pedestal for upper-floor positioning

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base Csdpfx Asuz If Nsbrohd - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: good (used), Rotary vane vacuum pump /// Oil-lubricated Manufacturer: Busch Type: RC 0100B Chsdpfx Abjbrantered Ultimate pressure: approx. 20 mbar Pumping speed: approx. 100 m³/h Condition: General overhaul If you have any questions about this listing or general questions about vacuum generation, please do not hesitate to contact us.

Condition: new, Precision, quiet, and reliable drill press. Built according to strict safety standards. Precision spindle with hardened Morse taper and machined base plate. Electronic speed control included. Cjdsir Aihspfx Abrohd Rotating table + vise, 350 x 250 mm. Drilling capacity in steel: R50 mm, ø 22. Tapping capacity in steel: R50 mm, M14. Spindle taper: CM2. Spindle stroke: 90 mm. Spindle bore diameter: 52 mm. Column diameter: 98 mm. Distance from column to spindle center: 201 mm. PU transmission. Electronic speed control (E). Spindle speed: 270 ÷ 4,200 rpm. Motor power: 0.75 kW / 220 V, single-phase. Dimensions (h x w x d): 1950 x 600 x 680 mm. Weight: 220 kg.

Condition: ready for operation (used), functionality: fully functional, Guillotine Shear – Mechanical Model: HSM-F 15/3.0 Chedpfxoydk Acj Abrod Machine No.: 11644-0995 Year of manufacture: 1995 Condition: Good, operational condition TECHNICAL DATA Cutting capacity: 1,550 x 3.0 mm Cutting angle: 2° Number of cuts per minute: 35 Motor power: 3 kW with brake, 380 V/50 Hz Manual backgauge: 0-500 mm Weight: 1,255 kg EQUIPMENT/ACCESSORIES  Angle stop with ruler  Double-edged blades  Foot switch  Documentation

Condition: good (used), Year of construction: 1972, Slideway grinding machine WMW SFBZ 2200/6000 Manufactured by WMW Germany in 1972 Main technical data: Table size: 2240x6000 mm Max. grinding width: 2200 mm Max. grinding length: 6000 mm Max. grinding height: 2000 mm Max. workpiece weight: 15000 kg Machine weight: 130 tons Chjdpfow U A Rmsx Abrjd The machine underwent a general overhaul in 2022. The feed boxes with electromagnetic couplings were replaced with motors and gearboxes for both heads. The bearings for the universal grinding head were also replaced. For more information, please contact us.

Condition: good (used), Rolling pressure 220 kN Ø Pieces 3mm min; 70mm max Pitch 6mm max Grooving pitch 2.25mm max Roller width 160mm max Chjdpfx Aevyyyxjbrjd Ø Roller 133mm min; 170mm max Roller shaft speed 24 30 38 45 62 72 90 114 rpm Ø Roller carrier shaft 54mm standard; 69.85 special Distance between shafts 135mm min; 230mm max Working stroke 15min max Feed rate 0.5mm/s to 6mm/s Laminating time 0.1s to 100s Pause time 0.1s to 100s Main motor 5.5 Kw Electrical power consumption 8.6 Kw Tank capacity 130 L Weight approx 2100 Kg