Veneer press

Ott

Condition: excellent (used), Hydraulic Veneer Press with Medium Heating Plates Under-piston design Iedpfx Amey Egkge Dobc Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display for the heating plates Pressing pressure can be infinitely adjusted via pressure switch two-stage hydraulic pump Rack compensation Main switch Safety pull cord CE marking Pressing area: 2550 x 1350 mm Opening height: approx. 350 mm Number of pressing cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3,200 kg Note for Used Machines: • Subject to technical changes and prior sale. • All prices quoted are ex-works - free loading! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements must be made in writing. (Inquiries will only be answered upon receipt of your address and telephone number!)

Condition: excellent (used), total length: 3,000 mm, total width: 1,500 mm, Panel press in very good working condition + Grecon finger jointing Ibodet Uduxopfx Am Dsc

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Iodjxgpaqepfx Am Dobc Weight: approx. 3200 kg

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding Ibodpfx Amoych Igo Doc 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades Iodoyy A Iqjpfx Am Dobc 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Condition: used, Edge sanding machines OTT S30 – 20 m/min Isdpfx Ajz S Nukjm Djbc Manufacturer: OTT Type: S30 Condition: Used Location: Rattelsdorf warehouse Machine description For sale is a used OTT S30 edge banding machine for professional edge processing in the wood and furniture industry. The machine features various processing units for efficient edge processing and is suitable for use in furniture production as well as in wood processing companies. Equipment and functions * Edge banding * Trimming * Flush trimming * Radius milling (R = 2 mm) * Scraping blade * Quick heating tank * Glue tank for granules * Feed rate: approx. 20 m/min Technical data * Machine length: approx. 4,500 mm * Year of manufacture: unknown * Machine condition: used

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, operating hours: 5 h, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, total height: 1,600 mm, total length: 5,700 mm, total width: 1,200 mm, overall weight: 3,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Used OTT Tornado Plus, professionally refurbished and inspected. Very good condition with a traceable history. The machine is fully functional and connected. A test run can be arranged at any time by appointment. Equipment: Fine milling cutter, radius, cleaning set (4-way spray system incl. scrubbing brushes), angle insertion aid, Zk.c – profile drawing blade R1 (incl. pneumatic adjustment for workpiece feeler rollers for workpieces with and without protective film), Zk.c – profile drawing blade R2, Zk.f – surface drawing blade, flush cutter, corner rounding AKF, surface drawing blade, forming pressure zone, edge processing unit, edge magazine, radius drawing blade Touch screen: 18.5", clear operation with powerful Beckhoff control Year of manufacture: 2011 Weight [kg]: 3000 Previous owner: 1 Availability: Short-term, by arrangement Ibjdjz Sq Edepfx Am Doc The Tornado+ is designed for high throughput: high feed rate with consistent edge quality, designed for multi-shift operation. It is therefore the machine for companies where the edge banding machine is the pacemaker of production, and downtime directly results in lost units. We will coordinate the equipment, units, and level of automation with you. Compact and versatile. The edge banding machine has been completely overhauled and revised by us. All tools, hoses, chain plates, etc. have been renewed. Fully functional machine.

Condition: used, Year of construction: 1970, Year of manufacture: 1970 Isdpfx Aswx Rrnem Dsbc Total pressing force at 320 atü: 80 tons Pressing cylinder: 6 pistons Motor power: 1.1 kW Heating-up time approx. 20 min. Price ex works.

Condition: used, Year of construction: 1969, Used Machine Isdpfx Aez Np Thsm Dsbc Year of manufacture: 1969 Features and technical specifications: - Pressing area: 255 x 135 cm - Pressing force: 100 metric tons - Number of press cylinders: 4 - Cylinder diameter: 100 mm - Opening width: 400 mm - Press plates: gold-anodized ELKOM plates - Heating: electric - Heating capacity: 18 kW - Maximum temperature: approx. 120 °C - Weight: approx. 4,500 kg - Safety pull cord will be retrofitted

Condition: excellent (used), Catalog number: 7549 TECHNICAL DATA max. width of the workpiece 1100 mm max. height of the workpiece 170 mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above: metal roller, sliding unit metal roller, sliding unit with shoe metal output roller, sliding – from below: traction belt pneumatic belt oscillation electric table lifting 2 types of feed speed motor 11 kW with pneumatic brake operating pressure 6-8 bar diameter of the extraction nozzle 2x150 mm overall dimensions L/W/H 1960x1700x2000 mm weight approx. 2000 kg – manufactured in Germany – 2 units Ibedpfx Amozty Rto Dsc – unpainted – used sanding machine, very good condition Net price: 31900 PLN Net price: 7420 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to significant fluctuations)

Condition: new, Year of construction: 2025, functionality: fully functional, ACTION M frame press Press for any kind of window system: windows, slatted shutters, shutters and solid wood doors. Max working dimensions L x H 3500x2500 mm Min working dimensions L x H 250x375 mm Max vertical/horizontal thrust 7,4/2 ton Working height 480/1050 mm Hydraulic pump power 2.1 kW MACHINE COMPOSITION: Ibjdpewh T Dlsfx Am Doc ACTION M ACTION M FRAME PRESS num 1 109831 Normative CE per SM 1 R00494 action m 35-25 1 930731 Volt 400 EU 1 931201 Frequency 50 Hz 1 530074 PVC-coated beams working surfaces 1 530075 Intermediate manual crossbeam complete of piston and counter-stop 1 530076 Hydraulic system for low pressure working 1 530077 Equipment for trapezoidal products with oscillating head to adapt to the different corners of the windows system 1

Condition: excellent (used), Catalog number 7976 Iedpfx Amsztw H Ej Djbc TECHNICAL DATA - max. width of workpiece: 1100mm - max. height of workpiece: 160mm 2 processing units: 1) grooved rubber roller for calibration 2) pneumatic shoe + 2 metal rollers – from above: - 2 metal rollers, sliding - pressure roller - processing unit - 2 metal rollers, sliding - processing unit - 2 metal rollers, sliding - cleaning brush – from below: - 2 rubber rollers, sliding - conveyor belt - pneumatic belt oscillation controlled by photoelectric sensors - electric table lifting - 2 types of feed speed - working pressure 8-10 bar - diameter of dust extraction nozzle 2x200mm - total power 30kW - overall dimensions (length/width/height) 2230x2020x2050mm - weight approximately 3000kg ADVANTAGES – made in Germany – 2 processing units – used machine, very good condition Net price: 16900 PLN Net price: 3930 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 1980, Press size: 2500 x 1300 mm Safety pull cord Button operation Ijdpfx Asz Ink Uem Djbc Total connected load: 18.0 kW Storage location: Nattheim

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 The Barbaric TSRET04 return system is a workpiece return unit for edge banding machines. It is the most basic version in the TSRET series and serves the following functions: - Transfers the workpiece at the end of the edge banding machine - Returns the workpiece to the height of the infeed of the edge banding machine Functionality After passing through the edge banding machine, the workpiece moves onto a roller table. The transfer is carried out by belt conveyors moving perpendicularly to the conveying direction, which rise from the roller table, lift the workpiece, transport it sideways, and set it down on a slightly lower roller table. This roller table conveys the workpiece to a belt conveyor. At the end of the belt conveyor, a non-driven, slightly inclined roller conveyor toward the edge banding machine’s infeed is connected. A stopper halts the workpiece at the end of the roller conveyor. Technical data - Max. load capacity: 60 kg - Max. panel size: 2,800 x 1,300 mm - Cycle time: max. 11 pieces/min Ibjdsx Rpgbspfx Am Djc Dimensions: - Return: 2,293 x 1,961 mm - Conveyor belt (L x W): 2,500 x 800 mm - Roller conveyor (L x W): 2,000 x 800 mm - Total length: approx. 6,943 mm - Total width: approx. 2,239 mm Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 44 kW (59.82 HP), input voltage: 400 V, input current: 68 A, table width: 2,250 mm, table length: 4,000 mm, OTT press – 4000x2250 mm working surface Ibjdpfxoz Rn Sfj Am Djc Programmable control, heated platens, 8-cylinder hydraulic pressing system. Heated vertical working surface (can also be used horizontally). For sale in excellent technical condition!