Veneer press

Ott Junior 90

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width: 1,350 mm, Costa calibration machine Gsdowmxh Tepfx Aadsin

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Gijdpswd N Rmefx Aadsn Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Year of construction: 2008, condition: excellent (used), Oil burner Weishaupt WM-L10 Year :2008 Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Gsdpfxji Ap Ats Aadjin Of course we also take care of all formalities Loading possible

Condition: used, Year of construction: 1996, Press dimensions: 2550 x 1350 mm Plates: Gold anodized Total pressing force: 80 t Specific pressure: 2.8 – 4.0 kg/cm² Hydraulic cylinders: 4 x 90 mm Opening width and press stroke: 400 mm Safety release line Safety frame Push-button control Connected load: 19.3 kW External dimensions: 2960 x 1490 x 1890 mm Storage location: Supplier Gijdpfsxy Tl Rox Aadjn

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw Gijdpewrp Emofx Aadsn - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Godpfxjfxpbme Aadsin

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 400 mm, saw band length: 5,550 mm, saw band width: 80 mm, table length: 800 mm, table width: 1,060 mm, working height: 400 mm, - Italian manufacture - Lamella band saw - Unpainted Gedpfsw H Rq Hsx Aadoin - Very good condition - Used saw Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Condition: excellent (used), Year of construction: 2011, operating hours: 216 h, functionality: fully functional, machine/vehicle number: 20MS090000/007, total length: 3,000 mm, type of input current: AC, total width: 2,500 mm, total height: 1,900 mm, overall weight: 1,450 kg, empty load weight: 1,450 kg, working width: 900 mm, compressed air connection: 6 bar, throughput speed: 50 mm/s, Gluing and longitudinal splicing machine For 0.4 to 3 mm thickness with direct gluing. With pre-gluing of edges up to 5 mm. Machine used very little, available ex location. Features: - Separate electric motors for chain and glue application - Glue is applied to the edge of the newly inserted veneer strip, increasing the strength of the glued joint - Robust, durable stainless steel conveyor chain with weighing joints - Separate temperature, speed, and pressure adjustment - Quick and easily accessible glue reservoir for fast and simple refilling or cleaning - Multiple heating zones for individual temperature adjustment Giedow E Rfbspfx Aadjn - Extended service life of glue reservoir due to integrated cooling unit - Infinitely variable feed speed INCLUDES GLUE COOLER Technical specifications: Throat depth: 900 mm Minimum veneer strip width: 45 mm Minimum veneer strip length: 300 mm Veneer strip thickness: 0.4 – 3.0 mm (up to 5 mm) Veneer moisture content: max. 8 – 12 % Working height: 900 mm Feed speed: 5 – 50 m/min Heating section length: 1000 mm Maximum heating temperature: 250°C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6.0 bar Dimensions (L x W x H): 2400 x 2300 x 1900 mm Weight: 1500 kg

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: W230-028, pressing force: 80 t, warranty duration: 24 months, pressure: 250 bar, power: 45 kW (61.18 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. This is a baler HBC80 (45kW) with crosswires. At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold with a 2-year warranty. Gisdpfx Aaotvat Todon

Condition: excellent (used), total width: 1,500 mm, total length: 3,000 mm, Panel press in very good working condition + Grecon finger jointing Gedpfet Uduxsx Aadsin