1996 Polymacc Rubber S.A.

Polymacc Rubber S.A.

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Redpfet Hagnjx Ah Ueck Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Year of construction: 1988, condition: used, weight max. in kg 6000 kg fork length 1900 mm 89% serial number GEF 2240 height of stroke 3300 mm weight of the machine ca. 9650 t Rcodpfxorxxbto Ah Usk

Condition: new, Year of construction: 2025, Working width: 400 mm Working height: 300 mm minimum workpiece length: 250 mm aggregates: 2 brush units separately adjustable 1. brush: scotch brite medium / diameter 220mm, vario drive 2. brush : Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: Handwheel Height indication: mechanical counter Feed speed: 4 - 12 m/min Motor power brushes: 2 x 3 kW / both with Vario drive (infinitely variable) Motor power feed: 0.37 kW Machine length: 1400mm machine width: 900mm Rsdpfx Aei Hpk Ush Uock Weight: 500kg

Year of construction: 1998, condition: good (used), I sell the multiple drilling machine with inserting KOCH Sprint-PTP Year: 1998 Number of drilling spindles 1 Rcjdpfxsd Exwgo Ah Usk Number of inserting heads 1 Programming CNC-driven Z-axis Working width 1200mm Working height max. 36mm Available immediately

Condition: used, Year of construction: 2013, Technical data Rodpfx Aov Szt Doh Ueck Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Emulsion spray at the inlet and outlet Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movement

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: 0-200-73-4868 Excellent condition – used only for demonstration and sample production. The machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical specifications and equipment: - Continuously adjustable feed speed: 16–25 m/min - Workpiece thickness: 8–60 mm - Fixed fence on the left-hand side - Adjustable working height - Pre-installed for LOOPTEQ O-200 / O-300 return system - Feed lock system - Workpiece alignment at infeed with roller support - Top pressure unit - Sizing package with DIA joint trimming cutter set WD40 - Gluing package with preheating up to 60 mm thickness - Adhesive application system with emptying function - Edge magazine with two vertical roll holders - Pressure zone - PERFORMANCE2 package - End trimming unit PK25 - Rough trimming unit BF10 (I-HM straight cutter set) - Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) - Multi-scraper MN21 automatic with profile knife set - Cleaning agent spraying unit - Glue joint scraper FA20 BASIC - Buffing unit FP10 top and bottom Rcodpfx Aoxwuryoh Usk - PowerControl PC23 PowerTouch control system - TAPIO Ready - Ethernet network connection - Wired manual control for setup operation - WOODCOMMANDER software package with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions - Documentation in Slovenian (digital and paper format) - Remote service enabled

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Morbidelli X 400 cnc machine with flat (nesting) table Rsdjxqzm Djpfx Ah Ueck

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Rcsdecqvhwjpfx Ah Usk Pipe diameter: 180 mm Location: From stock 54634 Bitburg - available immediately -

Year of construction: 1999, condition: excellent (used), 1999 Start type: to be agreed Cost of delivery: Customer cover Conditions of delivery: OWN RECEIPT Category: Grinding machines in Poland Subcategory: Rsdpfx Aed Nmdksh Ujck Through grinding machines Subcategory 2: Grinding machines, brushing machines Description Manufacturer VANGROENWEGHE Model / type of TYPE M-300-COMBI / CE machine

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Rcodpfjwka Nyex Ah Uek Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice