Stationary extraction system

Polytechnik A 800-45.0-G 6

Condition: used, Municipal tractor, tractor, implement carrier, manufacturer HAKO Type Hakotrak 2600 DA with snow blade and sweeper Date of first registration: October 28, 1998 Engine power: 20 kW = 28 hp Displacement: 1330 cc Top speed: 21 km/h - Three-cylinder PERKINS diesel engine - Hydrostatic drive with 3 electrically selectable speeds - All-wheel drive and locks - Cabin heating via cooling water system - Cabin with right and left doors, also removable - Roof can be raised for summer use - Rear window can be raised - Front hydraulics with coupling triangle = quick coupler and hydraulic float position - Two hydraulic connections each at the front and rear - Hydraulic power lift at the rear - Front PTO, clockwise rotating at 2000 rpm. (Rotates clockwise as viewed from the vehicle) - Rear PTO shaft rotates clockwise at 540 + 1000 rpm. - SPERBER snow blade with hydraulic cylinder for pivoting and spring flaps (width: 1400 mm) Lsdpfx Aswbvl Seh Ueak - PTO-driven sweeper with hydraulic cylinder for pivoting (width: 1300 mm) - Removable rear ball coupling (homemade) on the power lift - Front lawn tires 23 x 10.5 - 12 - Street lighting with 4 headlights and rear work lights - Yellow rotating beacon - 1302 operating hours Vehicle dimensions: Length approx. 2750 x Width 1245 x Height 2000 mm Vehicle weight without attachments: 1340 kg GVWR: 2500 kg GVWR: 1000 kg GVWR: Rear axle load 1800 kg Front tires 23 x 8.50-12/4PR Rear tires 33 x 12.50-15/4PR Towing capacity with brakes 3500 kg Towing capacity without brakes 1200 kg The vehicle was only used for property maintenance and for clearing snow on the company premises in winter. Never for municipal use. Without a salt spreader, which is no longer available and was only used initially. Sweeper is equipped with new sweeping brushes and works perfectly. Snow blade is very stable and works perfectly. The tractor needs some repairs; the parking brake is not working properly. The service brake is poor; the hydrostatic drive actually eliminates the need for a brake. However, the TÜV (German Technical Inspection Agency) criticized this. The hydrostatic drive needs to be readjusted at the foot pedal control. The vehicle is currently still registered, but will be sold deregistered.

Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage paternoster, and brushing machines on machineseeker! Ljdpfx Ahod S Efas Ujak MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for every membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to the Required size or supplied by roll. SILICONE Type: MS-2 Colour: milky white Surface: textured/smooth width (standard): 1680/2000 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.200°C SILICONE Type: MS-1 Colour: milky blue Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: MNK-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700-1750 and 2000 mm rubber: Natural rubber hardness: 42°Shore thickness: 2.5 - 4.0 - 5.0 mm temperature range: min. - 20 °/max. +130°C NATURAL RUBBER Special two-part version for Waterbed / oil-presses Type: MNK-2 WB Colour: grey/black Surface: Both sides smooth width (standard): 1700 mm rubber: Natural rubber hardness: 42°/60°Shore thickness: 3,5 - 4 mm temperature range:min. - 20 °/max. +130°C Standard SILICONE Rubber Sheet Type RSS Colour: redbrown or transparent (other colours on request) Surface: both sides smooth Standard length: cut or 10m rolls (other lengths on request) Standard width: 1200 mm - up to 1800 mm on request Polymer: Silicone hardness: 30° - 80°Shore thickness: 0.5 - 10 mm

Condition: used, Granulation and packaging line. Model: HM700E PRO 11KW Year of manufacture: 2022 It includes: Hammer mill - shredder Chip mixer Chip feeder Granulator Vibrating table Product feed belt (conveyor belt) Pellet hopper with packaging equipment Bag sealer and chip moisture meter Hammer mill with cyclone Motor: 11 kW / 400 V Productivity: 300 - 700 kg / h Weight: 360 kg Soft start installed Cutting system 16 hammers Chip mixer: Volume: 1.0 m³ Chip feeder: Motor: 3.3 kW / 380V Feeds up to 800kg / h Granulator: Motor: 22 kW / 380V/50hz; Productivity: 300 - 700 kg/h Weight: 590kg Soft start installed Vibrating table: Weight 90kg Product feed belt (conveyor belt): Dimensions: 5m × 0.4m. Automated packaging equipment: Dimensions: 1, 90x2, 50x2, 30 Volume: 1.5m³ Lodpfxexcy D Eo Ah Ueak Packing in bags: 1 - 50kg Equipped with two types of scales Bag sealer 220V Moisture meter

Condition: used, Sawblade tiltable 0-45 ° Length of the rolling table 3.200, 3.800 mm Lajdpfxotg Ails Ah Usk cutting width 1.300, 1,500 mm Motor output 7,5 kW Cutting height 177 mm Cutting height at 45° 133 mm Saw blade diameter 500 mm Speed 3000/3600/4200 U/min. work height max. 870 mm Dust suction hood 1x120, 1x100 mm

Condition: excellent (used), Circular saw flat motor KATT 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second stub shaft for hydraulic pump drive with pulley 150 mm Ø, tested and with new bearings. Ledpfx Ahjh D Rt Ao Usak

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ----- Machine will be renovated and functionally checked! Technical data summary (please inquire about any additional accessories included) ----- Generally ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom Lsdpfx Asu Su Hujh Usak > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: Glass bead saw pneumatically up and down Spindle description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glazing bead removal > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)

Condition: used, SECOND-HAND BAND SAW CENTAURO MOD. 800 Lsdpfjr Ilxcjx Ah Ujak

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Tyop GA 250 Lasdpfxspl D Hxs Ah Uek

Condition: ready for operation (used), Forklift truck Manufacturer: Jumbo Type: J60 DC12 Diesel Year of manufacture 1994 Payload: 6,000 kg Own weight: 9,260 kg Lifting height: 4300 mm approx. 25,000 operating hours Sold due to switching to wheel loader All service and lubrication intervals verifiably completed according to the inspection book! All filters (hydraulic, fuel, converter, air) replaced annually. Engine oil filter including oil every 250 operating hours. Only B0 was used as diesel fuel. (no B7) immediately available - fully functional Location: Austria, near St. Pölten Laedpfovtwuaox Ah Uek

Condition: good (used), Year of construction: 1991, Braun Canali band resaw TB 1100 Unimaster Roller diameter 1100mm With swivel table for diagonal cut Lajdpfx Aeucnt Hjh Uek disassembled from our warehouse in 23936 Grevesmühlen